Minigraver

Sany SY50U

Condition: excellent (used), functionality: fully functional, power: 29.42 kW (40.00 HP), fuel type: diesel, color: yellow, overall weight: 5,300 kg, empty load weight: 5,300 kg, operation weight: 5,300 kg, chain condition: 80 %, Year of construction: 2023, operating hours: 86 h, Equipment: UVV, additional headlights, air conditioning, cabin, gripper hydraulics, hammer hydraulics, hydraulics, onboard computer, rubber tracks, Year of manufacture: 2023 Operating hours: approx. 86 Operating weight: approx. 5,300 kg Exceptionally maneuverable. Convincingly efficient. Big performance in a small package. STANDARD EQUIPMENT: Yanmar engine, Stage V, approx. 40 HP, 145 Nm, 2,191 cc Load sensing hydraulics, max. 110 l/min 1st proportional auxiliary control circuit (GRL/hammer) on joystick 1 2nd proportional auxiliary control circuit (grab) on joystick 2 Swing brake 2 travel speeds Cylinder protection on arm Bucket breakout force ISO 32.5 kN Arm tear-out force ISO 22.9 kN Iaedsx Ndcbspfx Aalep ROPS operator cab Boom 2,700 mm, dipper stick 1,500 mm (L x H x W) 5,390 x 2,630 x 1,960 mm Dozer blade 400 mm rubber tracks Main battery disconnect switch

Condition: new, functionality: fully functional, mileage: 5 km, fuel type: diesel, color: green, overall weight: 5,500 kg, empty load weight: 5,500 kg, Year of construction: 2025, operating hours: 5 h, Equipment: additional headlights, air conditioning, cabin, hydraulics, low noise, onboard computer, rear pickup, rubber tracks, I am offering a brand new Zoomlion ZE55GU crawler excavator with an operating weight of 5.5 tons. The machine is available immediately and is ideal for earthworks, roadworks, landscaping, and construction applications. - Year of manufacture: 2025 - Powerful and fuel-efficient Kubota V2607 engine, compliant with emission standards - Operator cabin fitted with air conditioning, ergonomic seat, panoramic visibility, and rearview camera - Variable displacement piston pumps with swashplate; Maximum flow: 154.8 l/min - Digging depth: over 3.8 m - Quick coupler included - Buckets available separately—select exactly the type you need - Hydraulic breaker installation possible - Highly maneuverable, efficient, and work-ready machine - Manufacturer’s warranty. VAT invoice can be issued Iasdpsxwd Haofx Aalop - Machine available immediately—collection in Kolbudy or nationwide delivery possible - Assistance with organization of sea transport from any European port - Additional attachments available separately—a wide range of accessories to tailor the machine to specific tasks Financing options: We offer leasing or credit purchase options. We assist in selecting the most advantageous option and handling all formalities. We cooperate with renowned financial institutions: Deutsche Leasing S.A./ MLeasing Sp. z o.o./ Siemens Finance Sp. z o.o./ Pekao Leasing Sp. z o.o./ PKO Leasing S.A./ PEAC Poland Sp. z o.o./ Nest Lease S.A./ Alior Leasing Sp. z o.o. Financing conditions: - Simplified procedures up to 1 million PLN - Down payment: from 0% to 45% - Financing period: up to 96 months - Currency: PLN or EUR Call or write. I am happy to provide additional information and advise on attachments. This advertisement does not constitute a commercial offer as defined by Art. 66 §1 of the Polish Civil Code.

Condition: ready for operation (used), Heidelberg KORS 52X72 grey body with long panel Iajdexygd Topfx Aalop EMA DRYER

Condition: new, functionality: fully functional, power: 9.6 kW (13.05 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 10 l, color: yellow, overall weight: 1,030 kg, empty load weight: 930 kg, tire size: Rubberen rupsbanden 180 mm, tire condition: 100 %, number of seats: 1, first registration: 03/2025, emission class: euro5, shovel volume: 0.025 m³, Year of construction: 2025, Equipment: UVV, adjustable chassis, low noise, rubber tracks, === MAIN SPECIFICATIONS === Year: 2025 Operating hours: 0 h Operating weight: 1,030 kg Max. digging depth: 1,763 mm Digging reach: 3,090 mm Bucket capacity: 0.025 m³ Iaedjxwkm Hjpfx Aalop Engine manufacturer: Yanmar 3TNV70 Engine power: 9.6 kW Drive: Diesel Type: Mini crawler excavator Quick coupler system: No Hydraulic functions: 1 auxiliary single-acting circuit (22.8 l/min, 170 bar) Air conditioning: No Cabin: Open (without ROPS canopy) Heated cabin: No Travel speed: 1.8 km/h Stabilizers: No Tyres or tracks: Rubber tracks (180 mm) Emission class: Stage V CE certification: Yes === HIGHLIGHTS === • Only 700 mm wide – fits easily through standard doorways • Hydraulically extendable undercarriage up to 860 mm for extra stability • Powerful 3-cylinder Yanmar diesel engine – efficient, economical, and reliable • Standard auxiliary hydraulics – suitable for Wacker Neuson hydraulic hammers • Foldable dozer blade – always attached to the machine • Compact and robust design – ideal for renovation and indoor work === CONDITION === Brand new – direct from the manufacturer. Fully inspected, tested, and CE-certified. Ready for immediate delivery. === LOCATION & DELIVERY === Located in Sittard, The Netherlands. Worldwide shipping available. Price on request (EXW / excl. VAT). The Wacker Neuson 803 A1.0 is the smallest excavator in the range — yet delivers impressive performance. With a width of just 700 mm, it easily manoeuvres through doors and tight spaces. Its powerful hydraulic system and proven Yanmar diesel engine make it perfect for demolition, renovation, and indoor work. Ideal for contractors and rental companies seeking reliability, low operating costs, and versatility. === DELIVERY === Crane loading and worldwide transport available on request. All shipments handled professionally by the Collé Rental & Sales logistics team. Full documentation and CE certificates included.

Year of construction: 2004, condition: used, Ottevanger C5 Containerized Feed mill Automated grinding-mixing line with a capacity of about 5 t/h. Includes the following components, among others. - 55kW Hammer mill 650-375 - 11kW 1000L Mixer PM1000 - Silos - Bucket weigher - Dosing screws - Elevators - bunkers Iodpfeq Hr Rzsx Aaljap - Switchgear cabinets

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. Iodpofz U S Eefx Aaloap - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: new, table width 3000 mm table length 1500 mm burner heads 1 Control CNC feed 20.000 mm/min total power requirement 15 kVA dimensions of the machine ca. 4,5 x 2,5 m * Heavy machine bed with precision guides for quiet movement machine * A ball bearing cross carriage for height adjustment with 400mm vertical Hub * Thermal separation of the drive and cutting areas ensures the highest precision * Automatic height finding and torch height control during cutting * Torch holder with collision protection and automatic shutdown in the event of a collision * Installation or implementation of the machine using the plug & play method with a forklift, Ant or crane possible * 3-sided accessibility to cutting area through boom design SATOTEC suction table: The SATOTEC table system is characterized by a stable table construction max. cutting thickness of 150 mm. For cutting a workpiece thickness of 150 mm, oxyfuel cutting technology is required. The workpiece support frame has interchangeable ones placed at a 45° angle and 3 mm thick flat iron slats. The distance between the slats is 50 mm. Power source Kjellberg Q1500: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm both dry and under water Isdpepm U U Njfx Aaleap * Recommended cutting range from 0.5 to 40 mm * Maximum piercing thickness 30 mm, increase possible with ProPierce Technology * Marking, notching and punching, including coated metallic materials * Inverter power source with digitally controlled, fully electronic process flow * Integrated cooling with partially automated filling and emptying Gas control: Fully automatically controlled, processor-controlled plasma all-gas console Q- Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control Extraction TEKA EcoCube 5.5 kW Medium to be filtered: dry, fat-free or oil-free dust/smoke Filter area: 100 m² (4 cartridges of 25 m²) Filter cartridge: BIA M, Type Nano Degree of separation: 99% (according to BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan performance: 4500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50 Hz or 480V 60Hz. Current consumption: 11.5 A Current type: 3Ph+N+PE Fan structure: on the system, including silencer duct bend, right side Motor control: frequency converter Noise level: 75dB(A) + max 10 dB(A) with cleaning pulse Intake port: NW 250 mm via intake duct, left side Exhaust: via silencer duct bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: Light gray - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Locking hooks and toggle locks - Compressed air connection and condensate drain each mounted with one Bulkhead fitting - Compressed air connection with hose nozzle d=8mm - Provide the system with grounding bolts - Cable in UL version - EATON frequency converter on the left in the attached control cabinet

Condition: new, functionality: fully functional, power: 8.2 kW (11.15 HP), gearing type: hydrostat, fuel type: diesel, fuel consumption per hour: 0.8 l/h, fuel tank capacity: 10 l, color: blue, operation weight: 978 kg, lifting power: 250 kg/m, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, shovel volume: 0.014 m³, digging bucket width: 300 mm, brakes: engine braking, Year of construction: 2025, operating hours: 1 h, Equipment: CE marking, additional headlights, adjustable boom, adjustable chassis, gripper hydraulics, hydraulics, rubber tracks, standard shovel, tilting carriage, RIPPA R10 1T mini excavator – an excellent solution for yard work, ground leveling, small-scale digging projects, foundation preparation, and estate maintenance. _ Technical specifications: Weight: 978 kg Bucket capacity: 0.014 m³ Dimensions: 2430 x 912 x 2201 mm Digging depth: 1833 mm Hydraulic flow: 18 l/min Engine: KOOP diesel, 1 cyl., 8.2 KW Optional engine upgrade: Kubota Z482 diesel, 2 cyl., 8.2 kW – €1500 + VAT Concealed hydraulic motors Expandable tracks Joystick control Swing boom Hydraulic bucket thumb Iodoxr Aivjpfx Aaljap Quick coupler 10 available attachments (buckets, augers, forks, etc.). _ Price & terms: €6148 + VAT Warranty: 12 months or 1,500 operating hours Delivery: 7–10 working days FREE across Lithuania Delivery available throughout Europe

Condition: excellent (used), power: 74 kW (100.61 HP), fuel type: diesel, color: white, first registration: 10/2008, Year of construction: 2008, operating hours: 8,275 h, General information Model year: 2008 Serial number: TW01100392 Iodpfx Aaswybvaoljap Technical information Number of cylinders: 4 Drive: Wheel Empty weight: 10.500 kg Functional CE mark: yes Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Additional information Please contact Ernst van Hek for more information

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. As extra options with F3-27 roll forming machine you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; - radius panel rolls; - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; - ribbed panel forming machine RPFM; - automatic shear with automatic system; Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. In addition, we produce following metal roof panel machines: Isdjp Stgnepfx Aalsap standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;