Used Grain Scale for sale (2,748)

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. Nedpoyb Rpdofx Acvowd The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: new, functionality: fully functional, power: 460 kW (625.43 HP), fuel type: electric, Year of construction: 2026, Henan Mingyuan Heavy Industrial Equipment Co., Ltd. has established itself as a premier global manufacturer, providing integrated Sand and Gravel Production Lines that transform raw minerals into precision-graded materials. A MINGYUAN production line is not just a collection of machines; it is a synchronized system engineered for maximum throughput, minimal waste, and low operational costs. -1. Core Equipment Configuration The MINGYUAN system follows a multi-stage reduction philosophy to ensure particle shape and quality. Vibrating Feeder (GZQ Series):Ensures a continuous, uniform flow of raw material to the primary crusher. It features grizzly bars to pre-screen dirt and "fines," protecting the crusher from unnecessary wear. Primary Jaw Crusher (PE/C-Type): The "workhorse" designed for the initial breakdown of hard rocks (granite, basalt, river pebbles). MINGYUAN’s jaw crushers utilize a deep-chamber design for high crushing ratios. Secondary Crusher (Impact or Cone):Impact Crusher (PF Series): Ideal for medium-hard materials; produces highly cubic final products with excellent grain shape. Cone Crusher (Hydraulic/Spring): Preferred for high-hardness materials (granite/quartz) due to its high efficiency and low wear-part consumption. Sand Making Machine (VSI Series): The "finisher." It uses "stone-on-stone" or "stone-on-iron" technology to shape aggregates and produce high-fineness artificial sand. Vibrating Screen (YK Series): A high-frequency circular screen that classifies material into specific sizes (e.g., 0-5mm, 5-10mm, 10-20mm, 20-40mm). * Sand Washing Machine (XSD/LSX Series):Removes mud and impurities to ensure the final product meets strict concrete and asphalt standards. Nwodpfx Acoq Nywxovod 2. Technical Specifications & Performance MINGYUAN offers scalable solutions tailored to project size, ranging from small-scale mobile units to massive industrial stationary plants. | Feature | MINGYUAN Standard Specifications | | Production Capacity | 50 – 600 $t/h$ (Tons Per Hour) | | Max Input Size | Up to 1,100mm (depending on Jaw model) | | Finished Product Size | 0-5mm, 5-10mm, 10-20mm, 20-40mm (customizable) | | Power System | High-efficiency AC Motors or Diesel-Electric Hybrid | | Control System| Centralized PLC Control Cabinet with safety interlocks | | Materials Processed | River stone, granite, limestone, basalt, iron ore, and C&D waste | 3. The MINGYUAN Technical Advantage What differentiates MINGYUAN in the global market is the "One-Stop" solution approach: 1. High Crushing Efficiency:Optimized crushing cavities increase the contact area between the material and the liners, reducing energy consumption per ton. 2. Environmental Compliance: Systems can be equipped with advanced dust suppression misting and fully enclosed belt conveyors to meet stringent urban environmental regulations. 3. Durability: Wear parts (jaw plates, blow bars, mantles) are manufactured using high-manganese and high-chrome alloys, significantly extending the time between maintenance cycles. 4. Flexible Layouts: Whether for a mountain quarry or a tight urban recycling site, MINGYUAN provides customized CAD layouts to optimize gravity-flow and reduce conveyor length. 4. Conclusion A MINGYUAN Sand and Gravel Production Line represents a strategic investment in efficiency. By combining primary strength with precision finishing and washing, the brand ensures that every ton of raw material is maximized for its commercial value.

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. Nwsdpfx Acjq Igyvjvjd B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: new, Year of construction: 2025, For crushing marble, sandstone, and quartzite, various types of crushers can be used depending on the properties of the raw materials and the desired final product specifications. Here are some common types of crushers that may be suitable for processing these materials: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing. They are robust machines that handle tough materials, making them suitable for breaking down hard and abrasive stones like marble and quartzite. 2. Impact Crusher: - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder stones and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials like sandstone. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. 8. Crawler Mobile Crusher: - Mobile crushers offer flexibility and mobility, allowing them to be used directly at the quarry or job site. Crawler mobile crushers can handle various types of stones, including marble, sandstone, and quartzite. 9. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 10. Dust Suppression Systems: Njdpfx Acjq Nx Nnsvewd - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. When selecting a crusher for marble, sandstone, or quartzite, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Condition: new, functionality: fully functional, Year of construction: 2025, For crushing dolomite and phonolite rocks, various types of rock crushing machines can be employed, depending on the characteristics of the rocks and the desired final product specifications. Here are some common types of crushers that may be suitable for processing dolomite and phonolite: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing and can handle hard and abrasive materials. They are suitable for both dolomite and phonolite rocks. 2. Impact Crusher: - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder rocks and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials and may be suitable for rocks like phonolite. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. Nwedeq Nyuvjpfx Acvsd 8. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. 10. Mobile Crushers: - Mobile crushers, including crawler mobile crushers, offer flexibility and mobility, allowing them to be used directly at the quarry or job site. When selecting a crusher for dolomite and phonolite rocks, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: P21173X03980, Year of construction: 2020, operating hours: 3,938 h, load capacity: 1,600 kg, lifting height: 4,716 mm, free lift: 1,000 mm, fuel type: electric, mast type: triplex, construction height: 2,025 mm, 470cm lift electric pallet stacker with integrated scale, 3,938 operating hours. No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lift height: 4,716 mm Fork length: 1,200 mm Free lift: 1,000 mm Design: high-lift stacker MACHINE DETAILS Operating hours: 3,938 h Mast type: Triplex Drive type: electric Battery: 16/2016, 24V, 3PzS, 375Ah, tested at 24.8 V (good performance!) Dimensions & Weight Dimensions (L x W x H): 2,300 x 800 x 2,065 mm Weight: 1,300 kg EQUIPMENT Former Linde full-service unit Integrated scale Note: Initial lift not functional All dimensions are approximate. No liability for typographical or measurement errors. PICKUP CONDITIONS Nwodpeyuu Rlefx Acvjd Side loading up to 5 t possible with large forklift available on site at buyer’s own risk. Pickup ONLY with email payment confirmation! Pickup WITHOUT appointment Monday to Friday, 7:00 AM to 4:30 PM. If the mast is too high for transport, it can be dismantled upon request. If not collected within the agreed deadline, a storage fee of €20 per machine per day will be charged (must be settled before collection).

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: W41173J06378, Year of construction: 2018, operating hours: 3,372 h, load capacity: 1,400 kg, lifting height: 4,144 mm, free lift: 150 mm, mast type: duplex, construction height: 2,640 mm, DGUV certified until: 02/2027, Equipment: UVV, S+UVV 02/2027 1,400kg LI-ION Lithium Scale 414cm High-Lift Pallet Truck Pallet Truck Ameise Battery 02/2023 No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,400 kg Lift height: 4,144 mm Fork length: 1,200 mm Free lift: 150 mm Design: High-lift pallet truck MACHINE DETAILS Operating hours: 3,372 Mast type: Duplex Drive type: Electric Battery: 26/03/2023, 23.1V, 205Ah, measured at 23.09V (very good performance!) Nedpfsyuu Hyox Acvowd Dimensions & Weight Dimensions (L x W x H): 2,100 x 800 x 2,640 mm Weight: 1,500 kg EQUIPMENT Former Linde full-service machine Integrated scale All dimensions are rounded values. No liability for typing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with large forklift on site, at your own risk. Collection ONLY with e-mail payment confirmation! Collection WITHOUT appointment Monday to Friday 7:00 am - 4:30 pm. Mast can be dismantled for transport upon request if too high. In case of late collection, a storage fee of €20 per machine per day applies (the additional payment must be made before collection).

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: P21173Y05406, Year of construction: 2021, operating hours: 3,356 h, load capacity: 1,400 kg, lifting height: 2,324 mm, free lift: 150 mm, mast type: duplex, construction height: 2,100 mm, DGUV certified until: 03/2027, Equipment: UVV, Service + Safety Inspection (UVV) until 03/2027, 1,400 kg Scale Pallet Stacker / High-Lift Pallet Truck / Electric Pedestrian Stacker No Reserve Price – Guaranteed Sale to the Highest Bidder! TECHNICAL DETAILS Load capacity: 1,400 kg Lift height: 2,324 mm Fork length: 1,200 mm Free lift: 150 mm Design: High-lift pallet truck / stacker MACHINE DETAILS Operating hours: 3,356 h Njdpfx Ajyuu Azscvjwd Mast type: Duplex Drive type: Electric Battery: 24V, measured at 25.1V (excellent performance!) Dimensions & Weight Dimensions (L x W x H): 2,100 x 800 x 2,100 mm Weight: 1,300 kg FEATURES Former Linde full-service unit Initial lift Capable of lifting 2 pallets simultaneously Good ground clearance for rough or uneven floors Integrated scale All measurements are approximate. No liability for typing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with large forklift truck available on site, at buyer’s own risk. Collection ONLY with e-mail payment confirmation! Collection WITHOUT appointment Monday to Friday 7:00 am - 4:30 pm. A mast that is too high for transport can be dismantled on request. If collection is not made within the agreed period, a storage fee of €20 per machine per day will apply (payable before collection).

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: H2X386J12353, Year of construction: 2018, operating hours: 9,811 h, load capacity: 1,600 kg, lifting height: 6,625 mm, free lift: 1,800 mm, mast type: triplex, DGUV certified until: 03/2027, Equipment: UVV, Service + UVV until 03/2027 LI-ION Lithium 1,600kg Triplex 662cm Electric Forklift Truck No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rated capacity: 1,600 kg Lift height: 6,625 mm Free lift: 1,800 mm Overall height: 2,871 mm MACHINE DETAILS Mast type: Triplex Drive: Electric Battery: 30/11/2018 Li-Ion 48 V / 335 Ah, 16.3 kWh Dimensions & Weight Dimensions (L x W): 3,200 x 1,100 mm Weight: 3,500 kg Operating hours: 9,811 h EQUIPMENT Former Linde full-service machine Service valid until 03/2027 UVV inspection valid until 03/2027 Facelift model with tilt angle indicator (especially useful for delicate goods) Triplex mast with full free lift 3rd valve Side shifter Rear safety light Front safety light Comfort seat Integrated scale Note: The mast can optionally be dismantled for an additional charge of €950 net. All dimensions are approximate. No liability is accepted for typographical or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible on site with a large forklift at your own risk. Njdpfxjyuuhwj Acvowd Collection ONLY with email confirming payment! Collection WITHOUT appointment: Monday to Friday, 7:00 am – 4:30 pm. If the mast is too high for transport, it can be dismantled upon request. In case of late collection, storage fees of €20 per machine per day will be charged (must be paid prior to collection).

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: A.100765.01, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,200 mm, controller model: SIEMENS SINUMERIK 840 D, spindle speed (max.): 6,000 rpm, The machine spindle was overhauled in 2015! TECHNICAL DETAILS Travel X-axis: 1200 mm Travel Y-axis: 1000 mm Travel Z-axis: 1200 mm Spindle speed: 25 - 6,000 rpm Nwodpfoytfmzjx Acvod Max. torque: 900 / 1130 Nm Number of tables: 2 Maximum interference diameter: 1200 mm Table rotation speed: 15 rpm Table clamping torque: 10,000 Nm Tilting moment: 29,000 Nm Distance between spindle nose and table: 130 mm Pallet dimensions: 800 x 630 mm Pallet change time: 16 s Transport weight: 1,200 kg Number of tool stations: 250 Maximum tool diameter: 125 mm Diameter with adjacent stations free: 250 mm Maximum tool length: 650 mm Maximum tool weight: 40 kg Tool change time: 2.5 - 4.5 s Average chip-to-chip time: 7 - 9 s Tool holder: SK 50 DIN69871 Feed rate: 1 - 36,000 mm/min Rapid traverse: 36 m/min MACHINE DETAILS Control: SIEMENS SINUMERIK 840 D Dimensions & Weight Dimensions (L x W x H): 10,000 x 6,000 x 3,800 mm Machine weight: approx. 30,000 kg Operating hours: approx. 100,000 h (The machine was operated in 2-shift + ghost shift mode. The previous owner estimates approximately 100,000 hours over 20 years of operation.) EQUIPMENT Direct measurement via glass scales Coolant system 1,250 L High-pressure pump 11 bar (coolant) Through-spindle coolant 25/50 bar (TSC) Blow-out device for spindle taper Paper filter system Chip conveyor Pallet changer 2 pallets Set of tool holders Coolant/mist extraction Touch probe

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 55,582 h, machine/vehicle number: A0110A0058, controller model: BOSCH PNC-P, laser power: 2,000 W, number of slots in tool magazine: 21, TECHNICAL DETAILS Laser Power: 2,000 W Laser Model: TCF1 Nwsdpfsyv Ddrex Acved Cutting Head Lens Size: 5" Maximum Part Size for Part Chute: 300 x 500 mm Number of Tool and Clamp Positions: 21 MACHINE DETAILS Control Model: BOSCH PNC-P Power-On Hours: 25,582 h EQUIPMENT - Robust C-frame - Coordinate guide with integrated linear scale - 2 clamps - Maintenance-free three-phase servo motors - Brush tables - HI-LAS high-pressure cutting - Rapid processing with SprintLas - Programmable scan feed - Quick-change cutting head device - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact nesting table - Rotatable tool holder - Automatic repositioning device with hold-down - Automatic part chute - Sliding part container - Spray lubrication for punch - 2 lubricant containers - Punch slug extraction - Chip bin - Hydraulic quick shut-off - External control panel - 15" TFT color touchscreen - USB port - 3.5" floppy disk drive - Safety device - RJ45 network connection - Network integration - Comprehensive operating manual - Remote diagnostics SPECIAL FEATURES - Thread forming function - Softpunch function - Height-adjustable clamp - Repositioning cylinder - Vibration-dampened installation - Sensor for part chute - Spray lubrication for die - Brush-assisted loading and unloading Note: The machine has already been dismantled (by a certified TRUMPF used machinery partner) and is ready for shipment.

Condition: used, functionality: unexamined, machine/vehicle number: H2X387H04684, Year of construction: 2017, operating hours: 1,517 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lift height: 3,495 mm Nodpsyxb Hpsfx Acvjwd Overall height: 2,424 mm Fork length: 1,300 mm Free lift: 150 mm MACHINE DETAILS Mast type: Standard Dimensions & Weight Dimensions (L x W): 3,600 x 1,250 mm Weight: 5,700 kg Operating hours: 1,517 h FEATURES Former Linde full-service unit Service valid until 04/2027 UVV inspection valid until 04/2027 Integrated Ravas scale Facelift model with tilt angle display (ideal for handling sensitive goods) 3rd and 4th valve, 360° Kaup rotating clamp 2.5T391.1 + side shift Full cab with heating and windscreen wiper Front LED work light Rear LED work light Comfort seat All dimensions are approximate values. No liability accepted for typographical or measurement errors. COLLECTION TERMS Side loading up to 5 t possible with large forklift on site at buyer’s own risk. Collection ONLY with payment confirmation sent via email! Collection WITHOUT prior appointment possible Monday to Friday, 7:00 am to 4:30 pm. If mast height exceeds transport requirements, it can be dismantled upon request. If collection is not made on time, a storage fee of €20 per machine per day will apply (additional payment required prior to collection).

Year of construction: 2012, operating hours: 75 h, condition: like new (used), This Vötsch Hephaistos Industrial Microwave Chamber has had extremely low hours usage during its life so far, on 75 hours .. having been installed and minimally utilized from time to time for a single research project at the University of Sheffield AMRC research department known as the “Factory of the Future”. Sold new for a price of approx 250,000.00Euro. Contact us now for an exceptional offer for this high tech unit in as new condition. VHM Hephaistos Industrial Microwave Chamber For Aerospace and Automotive Engineering The Research Project The VHM Hephaistos Industrial Microwave Chamber for component testing was developed in cooperation with the Karlsruhe Institute of Technology (KIT). It is the result of a joint development project sponsored by the German Federal Ministry of Education and Research (BMBF). Alongside KIT, the Composite Research Center of EADS in Munich, the Institute for Aircraft Design (IFB) at the University of Stuttgart, GNK Aerospace in Munich and Vötsch Industrietechnik were involved in the project. Microwave system The VHM Hephaistos Industrial Microwave Chamber from Vötschtechnik is an internationally patented system. Fast and energy-efficient production processes are possible by using microwaves. The microwave chamber is characterized by its hexagonal geometry with a very high field homogeneity. This is a major advantage when thermoforming fibre composites (CFRPs) in the aerospace and automotive industries. Nedpfjtvz Rfex Acvjwd During the targeted volumetric heating of the products, the microwaves directly enter the material so that energy is delivered directly and the chamber does not require heating. This increases the heating rate and throughput, saving energy and time in addition. Reduced production costs This industrial microwave chamber guarantees you reduced costs due to shorter heating, process and cooling times required for curing CFRP components. Its material processing technology means the microwave can produce energy input into the component to be heated while the oven itself remains cold. In comparison to the process in autoclaves, the processing times are reduced by up to 50 %. Energy consumptions is reduced by up to 70%. Advantages: Possibility to use metal parts, such as conventional metal tools and feed systems, in the microwave field High degree of product quality thanks to the maximum homogeneity of the microwave fields provided by the hexagonal chamber structure. By using microwave absorbing materials, additional positive effects can be achieved Sizes from laboratory scale to large systems, e.g. as are required in the aerospace industry, can be achieved The modular design allows a flexible adjustment to your product Volumetric and selective heating for energy-efficient processes Precise heating of the products Hybrid systems, e.g. in combination with hot air

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine TRAVEL (X) 7,500 mm TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 smarT.NC option for the i530M. Independent AC. Heidenhain digital drive servomotor for each axis HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) Nedpfx Acew U Tlzovewd H48 – Coolant through the spindle type AD. M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. CE10 - PROTECTION on the back and both lateral sides of the machine column P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm PW11B – Pendulum working area system. PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Condition: used, Year of construction: 1998, functionality: fully functional, Used Soraluce model SP 8000 traveling column CNC bed type milling centre with 2.5° automatic universal milling head, 40-station automatic toolchanger and Heidenhain 426 CB control system. Serial Number: 108540. YEAR OF MANUFACTURE: 1998. TABLE LENGTH 8000 MM TABLE WIDTH 1100 MM COLUMN HORIZONTAL TRAVEL (X) 6500 MM HEAD VERTICAL TRAVEL (Y) 1600 MM RAM CROSS TRAVEL (Z) 1200 MM SPINDLE TAPER BT50 SPINDLE SPEEDS 20 – 2000 RPM SPINDLE MOTOR 22 Kw FEED RATES/MIN 5 – 5,000 MM RAPID TRAVERSE RATE/MIN 15,000 MM AUTO TOOLCHANGER 40 STATIONS ELECTRICAL SUPPLY 415V, 3PH, 50HZ Nwodpfx Acowgd Rgsvod FEATURES AND EQUIPMENT Horizontal/Vertical toolchange facility, Operators platform, Head preparation for through tool coolant, Varilock R80, Coolant system with 350 Litre tank and 3 and 8 bars pressure 50 L/Min flow, Electronic handwheel, Sliding splash guard system, Heidenhain linear scales, Linear recirculating slideway system. Eimeldingen 2000mm diameter integrated rotary table with additional frontal tables extensions 5000mm x 1600mm. LENGTH 10,250 MM WIDTH EXCLUDING ADDITIONAL BEDS 4,455 MM HEIGHT 3,800 MM WEIGHT 28,000 KGS

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 62286233, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, total width: 1,303 mm, total length: 776 mm, total height: 1,004 mm, overall weight: 324 kg, workpiece weight (max.): 20 kg, Equipment: documentation/manual, 📏 As New Mitutoyo QV Active 404 CNC Vision Measuring System for Sale – High-Precision, Non-Contact Metrology Upgrade your inspection capabilities with the Mitutoyo QV Active 404, a cutting-edge CNC vision measuring system designed for fast, accurate, and repeatable 2D and 3D non-contact measurements. This used unit offers premium Mitutoyo performance at a cost-effective price—ideal for precision manufacturing, quality control labs, and R&D environments. Condition: Never Used – Still in original crates 🔧 Product Overview – Mitutoyo QV Active 404 The Mitutoyo Quick Vision Active 404 is part of Mitutoyo’s renowned Quick Vision series, combining fast automatic measurement, superior accuracy, and flexible lighting systems. It’s equipped with CNC stage movement, a high-resolution camera, and QVPAK software, providing automated, high-accuracy vision-based inspection in one compact footprint. This machine is still in its original crates and is in as new condition, making it a perfect solution for any business requiring advanced metrology tools without the cost of new equipment. ✅ Key Features of the Mitutoyo QV Active 404 📐 Automatic 3-Axis Measurement (X/Y/Z) with CNC stage 🔍 Non-Contact Vision Measurement – Ideal for fragile or micro-scale parts 🧠 QVPAK Software – Industry-leading metrology software for automated routines, reporting, and part programming 💡 Advanced Illumination System – Includes ring light, coaxial light, and programmable sub-stage lighting 🔧 Motorized Zoom Lens for flexible magnification and measurement precision 🖥️ Real-Time Edge Detection for ultra-precise dimensional analysis 📐 Technical Specifications Measurement Range: X400mm / Y400mm / Z200mm Vision Head Range: 400x400x200mm Size of Stage Glass: 466x480mm Max Stage Loading: 20kg Resolution: 0.1 µm Accuracy (E1): ±(2.5 + 4L/1000) µm Touch Probe Accuracy: (2.4+3L/1000) µm Stage Type: Motorized CNC, granite base Camera: High-resolution digital CCD Lighting System: Multi-source - ring, coaxial, contour Magnification Change System: Zoom optical system with 8 positions Lens System: Motorized zoom Sensor Type: High resolution CMOS colour camera Software: Mitutoyo QVPAK Machine Dimensions: 776x1303x1004mm Weight including Stand: 324kg 🧰 Perfect For Precision component manufacturers Aerospace, automotive, medical device inspection Electronics & PCB measurement R&D and dimensional analysis labs Tool & die makers and high-accuracy workshops 📦 What’s Included Used Mitutoyo QV Active 404 CNC Vision Measuring System Machine Stand Work Station Master Ball Stand MCR Attaching Plate Calibration Ring QVPAK Software Nwsdpfx Acjwqrvlsved Dell Computer Wide Screen Monitor Printer Used Mitutoyo QV Active 404 for sale Mitutoyo vision measuring system CNC non-contact measuring machine QVPAK software system Pre-owned Mitutoyo CMM Vision metrology machine UK / EU Mitutoyo Quick Vision Active measuring device Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, measuring range X-axis: 640 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, total height: 2,320 mm, total width: 920 mm, total length: 1,130 mm, compressed air connection: 4 bar, Equipment: documentation/manual, Aberlink Axiom too 600 CNC CMM Machine Type: CNC Co-Ordinate Measuring Machine Version: Axiom too 600 Year: 2007 Condition: Like New as had very little use Includes Upgrade to full CNC Auto Temperature Compensation SMC Refrigeration Air Dryer Aberlink Software PC & Monitor Description When the original Axiom CMM was released in 1997 it revolutionised CMM design utilising extremely innovative CMM technology. The Axiom was hugely successful but now Aberlink have taken all the best features from the original model and improved upon them. The Axiom too offers a larger measurement volume and higher accuracy than its predecessor, incorporating the very latest in materials technology. This Axiom too is the 600 size and is full the CNC version. Technical Specifications Measuring Volume: 640 x 600 x 500mm Accuracy: B89 0.008/300mm (VDI (U3) 0.0035 + L/250mm) Measuring System: Renishaw readheads and tape scale Resolution: 0.0005mm Probe System: Renishaw Max Velocity Vector: 500mm/sec Nsdjyap R Rspfx Acvswd Max Acceleration Vector: 1000mm/sec2 Bearings: Air Bearings on all axes Z Axis: Pneumatically counterbalanced Max Balance Weight: 1kg Air Consumption: 23 I/min (0.8 cfm) at 4 bar Required Air Pressure: 4 bar (60psi) Software: Full Graphical Interface designed for Windows Dimensions: 1130 x 920 x 2320mm Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Nwjdjxyungopfx Acvsd Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control. Notes: *Specifications are given in good faith but not guaranteed*

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 350 mm, feed length Z-axis: 350 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, spindle speed (max.): 10,000 rpm, spindle speed (min.): 50 rpm, total height: 2,500 mm, total width: 5,200 mm, total length: 2,700 mm, table width: 375 mm, table length: 600 mm, table height: 120 mm, type of input current: three-phase, table load: 250 kg, overall weight: 6,000 kg, input voltage: 400 V, workpiece weight (max.): 250 kg, distance table to spindle center: 500 mm, Equipment: rotational speed infinitely variable, 1997 Heckler & Koch BA 18 – 4 Axis CNC Machining Centre – Siemens Sinumerik Machine Manufacturer: Heckler & Koch Model: BA 18 Machine Type: 4 Axis Machining Centre Year: 1997 Condition: Old but working well High-Precision German CNC Machining Centre for Sale in Ireland Used Machine Tools Ireland is pleased to offer this 1997 Heckler & Koch BA 18 4-Axis CNC Machining Centre, a robust German-built vertical milling and drilling centre renowned for accuracy, reliability, and heavy-duty construction. This machine is equipped with a Siemens Sinumerik CNC control, making it a solid choice for workshops requiring dependable CNC milling with integrated 4th-axis capability. Key Features & Highlights Heckler & Koch BA 18 CNC Machining Centre 4-Axis configuration Siemens Sinumerik CNC control Single spindle version Rigid German construction Automatic tool changer Ideal for precision milling & drilling Suitable for general engineering, toolmaking & production machining Technical Specifications – Heckler & Koch BA 18 (Single Spindle) General Machine type: Vertical Milling & Drilling Centre Axes: 4 Axis Control: Siemens Sinumerik Spindle type: Single spindle Tool holder: SK40 Travels (Programmable Working Area) X-Axis: 500 mm Y-Axis: 350 mm Z-Axis: 350 mm Spindle & Performance Spindle motor power: 9 kW (40% duty) Spindle speed range: Infinitely variable 50 – 10,000 rpm Torque: 50 Nm (40% duty) 35 Nm (100% duty) Power transmission: Toothed belt drive Tool System Tool magazine: Chain magazine Tool capacity: 36 tools Tool change: Automatic Average chip-to-chip time: Approx. 5 seconds Maximum tool weight: 4 kg Maximum tool diameter: 63 mm (125 mm with free auxiliary positions) Maximum tool length: 225 mm Accuracy & Feed Rates Positioning tolerance (VDI/DGQ 3441): 0.020 mm Mean position variation (X/Y): 0.008 mm Feed rates (X / Y / Z): 0 – 25 m/min Feed force per axis: 5000 N Njdoyatkbjpfx Acvswd Measuring system: Rotary encoder with glass scales Table & Load Maximum table load (including table weight): 250 kg Distance table left/right: 400 mm Table to spindle nose: Max: 500 mm (620 mm without table) Min: 150 mm (270 mm without table) Electrical & Utilities Connection voltage: 3 × 380/220 V, 50 Hz Connected load: Approx. 28 kVA Pneumatic supply: Max. 8 bar Sound level at rated operation: Approx. 78 dB(A) Dimensions & Weight Machine dimensions (L × W × H): Approx. 5200 × 2700 × 2700 mm Transport dimensions: Approx. 3600 × 2000 × 2500 mm Machine weight (incl. control cabinet): Approx. 6000 kg Ideal Applications Precision CNC milling Drilling & tapping operations Toolmaking & jig work Small to medium batch production General engineering workshops Why Buy From Used Machine Tools Ireland? Trusted Irish supplier of quality used CNC machinery Machines honestly described & professionally inspected Nationwide & export delivery available Competitive pricing Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2016, 2016 OGP (Optical Gaging Products) Smartscope Scope 300 High Capacity, High Performance 3D Multi-sensor Metrology System Njdpfx Acoywzrpevswd On Granite Table (Dimensions W910 x D910 x 105mm Thick). Axis Travel 'X'=300mm, 'Y'=300mm, 'Z'=250mm. 'XYZ' Scale Resolution: 0.1µm, Including Dual Z-Axis Scales. Drive System: DC Servo With 4-Axis Control (X, Y, Z, Zoom); Air Bearing Z Axis; With Multifunctional Handheld Controller. Worktable: Hardcoat Anodized, With Fixture Holes, Removable Stage Glass, 30kg Recommended Max Payload. Optics: AccuCentric® Auto-Compensating, Fully Telecentric Zoom, Motorized; 1 x Lens. Illumination: Substage LED Profile, Coaxial LED Surface, SmartRing™ LED Ring Light. Metrology Camera: Monochrome Digital Metrology Camera. Field Of View 8.1mm x 6.1mm (Low Zoom) To 0.81mm x 0.61mm (High Zoom). Working Distance 65mm. Power Requirements: 100-120 VAC or 200-240 VAC, 50/60 Hz, 1 Phase, 900W. Compressed Air Requirements: Air Supply Pressure: 0.45 MPa; Minimum Flow Capacity: 32V/min; Air quality ISO 8573-1:2010 Class 4.3.4 Or Better. Safe Operating Environment:15-30°C, Non-Condensing. Rated Environment: Temperature 18-22°C, Stable To ±1°C; Max Rate Of Change 0.5°C/Hour, Max Vertical Gradient 1°C/Metre , 30-80%Humidity, Vibration 0.5 < 0.001g Below 15 Hz. 'XYZ' Volumetric Accuracy: E, = (3.0 + 5L/ 1,000)µm. 'XY' Area Accuracy E, = (1.5 + 5L/1,000)µm. 'Z' Linear Accuracy E, = (2.5 + 5L/1,000) µm. S/No. SQ3001383 (2016). NOTE: Not CE Registered. This item will be loaded to buyer's vehicle, a loading charge of £100 + VAT will be added to the buyer's invoice. With Joystick Controller, Renishaw MCR20 (4) Position Probe Rack, Calibration Sphere, Renishaw Stylus, Fixture Brackets, Monitor, Keyboard, Mouse & Leads. Overall Dimensions L850 x W800 x H800-1,025mm. System Weight 160kg. Note: Not CE Registered. This item will be loaded to buyer's vehicle, a loading charge of £100 + VAT will be added to the buyer's invoice

Condition: used, stock code 112754 CME Universal miller model FU31CM, 1860 x 360mm table, (plus two covers at 300mm each) approx 500mm under tool, knuckle head, with horizontal attachment, , DRO Sony 4 axes ACURITE READOUT & SCALES.. 40 INT spindle. Machine in exceptional condition ex University. Nwsdpfjywzlcox Acvsd

Condition: good (used), functionality: fully functional, power: 398 kW (541.13 HP), gearing type: automatic, color: green, machine/vehicle number: 100114331.Y, Froling Biomass Boiler with CORDIVARI Buffer Tank - Complete Commercial Heating Systems Offered for sale is a high-capacity biomass heating system comprising a Froling TX 200 biomass boiler and CORDIVARI thermal buffer tank (puffer). This is a commercial-grade installation, designed for high-demand environments such as agricultural operations, industrial units, estates, and large-scale residential projects. The system has been installed and powered on for testing, with video evidence attached. Boiler Specification (Froling TX 200): • Boiler class: EN 303-5 Class 5 (high-efficiency, low-emissions standard) • Nominal heat output: 199 kW • Heat output range: 59 – 199 kW • Nominal fuel input rate: 214 kW • Permitted fuels (EN 14961): Wood pellets (Part 2: D06, Class A1) Wood chips (Part 4: P16A – P45A, Class A2) • Max. operating temperature: 90°C • Max. operating pressure: 3 bar • Water content (boiler): 570 litres • Electrical connection: 400V / 50Hz / C35A • Power consumption: 285 – 650 W • Production number: 100114331.Y The Froling TX 200 is a premium biomass boiler known for high efficiency, automated operation, and reliability in continuous-use environments. Paired with a CORDIVARI thermal buffer tank, the system delivers improved heat management, reduced cycling, and optimal energy utilisation. The system is also equipped with an automatic biomass feeding system from upper storage containers, ensuring consistent fuel delivery and minimal manual input. Nwjdpfoyw I Hmjx Acvsd Important: The biomass system has not been used in full operation - it has only been tested. Operating time can be verified via the built-in digital counters, which display the total minutes the system has run. This combination provides a stable and efficient renewable heating solution, ideal for buyers looking to reduce long-term energy costs while meeting environmental targets.

Condition: good (used), Year of construction: 2014, feed length X-axis: 1,000 mm, feed length Y-axis: 700 mm, feed length Z-axis: 180 mm, travel distance X-axis: 1,000 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 180 mm, Selling FIVE working Datron M10 Pro due to relocation, with a 6th M10 Pro for SPARES/REPAIR. Nwsdpfx Ajywu Tyscvod 1 x Datron M10 Pro 2018 3kw 40k HSKE25, 2 x 12 tools fixe axis capable linear scale option 1 x Datron 8 Cube 2015 3kw 40k HSKE25, 2 x 12 tools fixe axis capable 1 x Datron M10 Pro 2014 3kw 40k HSKE25, 2 x 12 tools 1 x Datron M10 Pro 2014 3kw 40k HSKE25, 2 x 12 tools 1 x Datron M10 Pro 2014 3kw 40k HSKE25, 2 x 12 tools 1 x Datron M10 Pro 2014 Spares/Repair ONLY , no spindle, no XYZ servos, no computer. Available for immediate sale. The DATRON M10 Pro is a high-speed CNC milling machine designed for precision and versatility in industrial applications, particularly for the aerospace, medical technology, and electronics industries. Built with a solid granite table for vibration damping and thermal stability, it is engineered for high-speed cutting (HSC) of non-ferrous metals like aluminium, composites, and plastics with a 3.0 kW HF Spindle HSK-E 25.

Condition: used, This listing is for the Sartorius YDP20 Printer The unit is in full working condition and ready for immediate use Nedpfx Aceyw Sxmovswd The Sartorius YDP20 is a high-performance laboratory thermal printer designed for seamless data documentation. It connects directly to balances and scales to provide fast, clear, and GLP-compliant records of weighing results, ensuring accuracy and traceability in professional lab environments. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, Year of construction: 2019, functionality: fully functional, input frequency: 50 Hz, Complete Fuel Polishing & Storage System – 130,000 L Capacity Available for immediate decommissioning from a data centre: a fully equipped fuel storage and polishing system designed for reliable diesel generator operation. Main Components: Fuel Transfer Pumps (x4) Nedpsw Hdg Usfx Acvewd Independently controlled via front-panel PLC Operational indicators and flow meters (L/h) Filtration Units (Filtertechnik) High-efficiency diesel filtration skids Integrated monitoring and alarm panels (differential pressure, overload, emergency stop) Electrical Control Panels Manual/automatic operation modes System status and fault indicators (low flow, bypass, pre-alarm) Emergency stop functionality Underground Diesel Storage Tanks (x4) Total capacity 130,000 litres Connected via reinforced piping and fuel supply lines Fuel Pipework & Monitoring High-grade piping with safety valves and pressure sensors (Barksdale, Pyropress) Designed for safe and precise operation External Housing – Fuel Pump Room Weather-resistant metal cabin with safety signage (“Highly Flammable”) Internal insulation for added protection This system is ideal for data centres, industrial facilities, or any large-scale diesel generator installations, offering high reliability, complete monitoring, and easy relocation.