Used Glazing-Press for sale (14,244)

Condition: used, Veneer press Feed-through press HOT Colombo Machine dimensions: 4400x1400 Oil heated input/output is included 8 cylinders Complete with glue roller etc. - Documentation available: No - CE certificate present: No - Number of stages [pcs]: 1 - Number of cylinders [pcs]: 8 - Heating type: Oil heated Ksdpfxswnhvve Amrjlu Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, operating hours: 14,367 h, pressing force: 320 t, stroke length: 445 mm, table length: 4,420 mm, throat depth: 420 mm, clearance between the columns: 3,680 mm, total width: 5,300 mm, total height: 3,200 mm, overall weight: 25,000 kg, year of last overhaul: 2026, Equipment: CE marking, safety light barrier, Special equipment: + Front work area lighting + Rear back gauge system, 6 axes, with control cabinet air conditioning + ACB Easy communication bus (hardware side) + Hydraulic upper tool clamping + CNC-controlled lower tool positioning (I-axis) Klodpfxjzdc A Io Amrju + CNC-controlled crowning Machine - Sturdy machine frame in all-steel construction Stress-relieved pressure beam through annealing - 4-cylinder upper drive - Block hydraulics with low-noise double pump - Rear back gauge with CNC-controlled X and R axes - Hydraulic upper tool clamping - Hydraulic lower tool clamping - Control cabinet cooling via air-to-air heat exchanger - Network connection for machine control Control - TRUMPF TASC 6000 Safety - Standard safety devices

Condition: used, Year of construction: 1996, Technical details: pressure: 6,3 t throat: 170/180 mm stroke: 310 mm power capacity: 3 kW dayligth: 775 mm weight of the machine ca.: 1,5 t clamping table: 470 x 330 mm table height over floor: 800 mm C-Type 1 Station Kodpfxstxdmwo Amrolu *

Condition: used, Year of construction: 2022, power: 15.8 kW (21.48 HP), total length: 1,760 mm, total width: 1,040 mm, total height: 2,555 mm, overall weight: 3,000 kg, No. 3279 Servo press / servo eccentric press Huras NKV 180-650 Used, year of construction 2022 Servo press for automation tasks and punching processes Fields of application: try-out and pre-series production / production of punched parts / punched strip overmoulding / packaging / assembly Freely programmable speed profiles and motion sequences from 1 - 150 strokes/min Setup in inching mode with full press force Nominal press force 180 kN Stroke height 5 - 50 mm (freely programmable) Ksdpfszc Ix Ssx Amrslu Stroke frequency / number of strokes 1 - 150 strokes/min Ram adjustment +/- 1 mm BDC dimension / installation space at BDC 274 mm Passage left / right 210 mm Tool installation space / press table/ram surface 650 x 450 mm LW Table opening 490 x 140 mm LW Punching direction from left to right Drive technology dynamic servo direct drive Lenze Drive power 15.8 kW Operating pressure 5 bar Control Siemens S7-1500 Swivelling touchscreen panel Siemens Simatic HMI TPI1200 12” Dynamic servo feed unit VS-125 Transport dimensions approx. 1760 x 1040 x 2555 mm LWH Weight approx. 3000 kg Sale on behalf of customer, ex location near 35392 Gießen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw Ksdpfx Amozddrderslu

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, Heidelberg GTO 52+ Plus version Varn Kompac Kodjzdvh Aspfx Amrelu 14 million impressions Powder spray Available immediately

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Format 37 x 52 cm CP-Tronic Electronic register control Klodpfx Amjzdu R Nereu Ink film thickness control Deionization system (Eltex) in the feeder and delivery Plus version Printing on one side (1/1) or both sides (2/0) in color Alcolor V with Variosystem 40 million

Condition: new, Year of construction: 2026, Folding bench ZGR2000/1.2 of company prod - masz locally to the try out and equal to the take. You get professional instruction on the spot. Working width 2140 mm Sheet thickness up to 1, 2 mm Bending angle up to 145° -Forward: 80 mm Gas pressure spring Scala of degree of Kedszfirkopfx Amrjlu Velocity for preset bending angle Hanger depth stop Tray for sheets Weight approx. 250kg Accessories - Rollenschere(bis 0,8mm) 350EUR Shipping within Germany 180EUR All prices are inclusive of value added tax. Certificate CE Warranty: 12 months Pickup Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on demand

Condition: used, working width: 3,500 mm, Hydraulic press brake Manufacturer: HARTMANN, Model: AKP 30-35C Year of manufacture: 1994 Technical specifications Manufacturer: Hartmann Model: AKP 30-35C Year of manufacture: 1994 Capacity: 300 t Working length: 3500 mm Overrun distance: 4 mm Overrun time: 40 ms Safety distance: 64 mm Connected load: 30 kW Equipment • CYBELEC DNC 70 control system Kedpjwucgiofx Amrjlu All information provided without guarantee. A demonstration under power can be arranged upon request. The company Hartmann is based in Germany (Frankfurt region). Today, Hartmann specializes in the repair and servicing of sheet metal processing machines.

Condition: new, This 60 ton motorized workshop press has a movable cylinder (left-right) and a height-adjustable work table. Equipped with pressure control, 2 speeds, a joystick and a hand pump for precise pressing tasks. Made in Europe 60 ton workshop press electrically operated, manuf. RHTC – type M/H-M/C-2 This 60 ton motorized workshop press has a movable cylinder (left-right) and a height-adjustable work table. Equipped with pressure control, 2 speeds, a joystick and a hand pump for precise pressing tasks. The workshop press is produced in the Netherlands. Features Kledpfx Ajwfcq Njmrou Sliding cylinder (left-right) Integrated pressure gauge Pressure regulator Two-speed hydraulic unit Height-adjustable work table Joystick for cylinder operation Hand pump for precise press work Options: Foot pedal or hand remote control for operating this 60 ton workshop press V-block set for additional support

Condition: ready for operation (used), Year of construction: 1994, Brand: HSM Model: 155 VL Year of construction: 1994 Pressing force: 157 kN Voltage: 400 Max. bale weight: 250 kg Kodozc Hhxspfx Amrolu Bale dimensions: 110 x 70 x 95 cm Machine weight: 950 kg Machine dimensions: 144 x 100 x 234 cm Feed opening dimensions: 110 x 59 cm

Condition: repair required (used), Year of construction: 2003, Rubber injection molding machine, REP brand Kjdpfx Ameizi H Herjlu 25 tons Year: 2003 All four columns need to be replaced (estimated cost: €9,000).

Condition: excellent (used), Year of construction: 2015, With a focus on optimized and energy-efficient drives in the automotive industry, significantly higher demands are placed on the components of the drive system. Higher power transmission, higher torques, and a smaller overall size are the challenges. This development has led to an increased need for cold-formed splines. With the vertical spline press (VSP), Sack & Kiesselbach provides customers with a solution that offers technological and logistical advantages compared to conventional technologies (such as rolling or broaching). The relatively small and very user-friendly press can be configured for both manual and automated operation. In addition to the spline press, the customer can also obtain the appropriate tooling system and the corresponding process technology from a single source. 1 used vertical spline press Manufacturer: Sack & Kiesselbach Type: VSP 50/30 Year of manufacture: 2015 Technical data: Klodpfxogtty Tj Amreu Press force: 500 kN Ram stroke: 450 mm Closing speed: 200 mm/s Pressing speed: 5.5 mm/s Opening speed: 120 mm/s Table dimensions: 500 x 400 mm Installation height: 1000 mm Distance between columns: 530 mm Spline cylinder speed: 3-9.5 mm/s Dimensions: Height: 2900 mm Width: 3100 mm Depth: 1400 mm Drive power: 8 kW Special equipment: Digital position measuring system Spline tool for internal gearing

Condition: good (used), Year of construction: 1971, pressing force: 630 t, Manufacturer: Sack & Kiesselbach Model: EP 630 Mode of operation: oil-hydraulic Kjdpfjwxw Amox Amrelu Table height: 1175 mm Stroke: 305 mm Tool installation height: 317 mm Rapid approach descending speed: 6.9 mm/s Pressing speed: 0.3 mm/s Return speed: 6.3 mm/s Drive power: 11 kW Electrics: 550 V / 60 Hz Information without guarantee.

Condition: good (used), Year of construction: 2015, functionality: unexamined, - Total stroke: 300 mm - Maximum press force: 68.9 kN - Power: 0.3 kW Ksdpfx Aowxvwijmrelu - Min/max air pressure: 3 - 6 bar - Machine weight: 1250 kg

Condition: ready for operation (used), Year of construction: 1985, 1 used spotting press Manufacturer: REIS Model: TUS 160 OK 200 Year of manufacture: 1985 Technical details: Klodpfx Aeyb Stqsmrju Press force: 200 t Table length: 2200 mm Table width: 1550 mm Installation height: 2200 !! mm Ram return force: 6,000 kg Table load capacity: 10,000 kp Total power requirement: ? approx. 25–30 kW Machine weight: approx. 30 t Space requirements: approx. 4 × 7 × 7 m Shipping dimensions: approx. 13.4 × 3 × 3 m

Condition: used, Year of construction: 1952, Type of machine: Down-stroking press Manufacturer: SACK&KIESSELBACH Model: EP500 Year of construction: 1952 Pressing force: Ksdpfx Ajwxw H Ejmrolu 500 t Clear gap: 450 mm Location: In Germany

Condition: good (used), 1 used single-sided press Make: SACK & KIESSELBACH, year of construction: 1962,74 serial number 31900 Pressing force 630 t, Klodpfx Aoul U Svsmrsu stroke 310 mm Installation height 320 mm Working height 1200 mm Drive power 10 KW

Condition: good (used), Year of construction: 1977, 1 used eccentric press Make: Helmerding Model: EL 35 B Year of manufacture: 1977 Ksdjwxxr Ajpfx Amrelu Machine no.: 5182 Pressing force: 350 kN Adjustable stroke: 12 - 80 mm Adjustable slide: 70 mm Slide strokes per minute: 110 Adjustable table: 150 mm Safety distance: 150 mm Overrun: 50 mm Weight: 2050 kg Equipped with press safety valve

Condition: used, Year of construction: 2020, Note: - No workpieces (molds) included - (blue) - No forklift, etc., available on site. Klodpfx Amozfib Eerou - Oils must be taken away.

Condition: good (used), Description PEM Serter 4, very good condition Kedpfszfbu Djx Amrslu The machine can process insertion fasteners from all manufacturers up to 53 kN (from M2 to M8 in steel and up to M6 in stainless steel). Quick tool change, ideal for small batch sizes. This machine has an additional manual QX system as special equipment, which enables quick switching between 4 different tools. The QX system is purchased separately as an accessory. The individual price is €2,000. The one-hand operation of this tool allows an operator to install four different types and/or sizes of fasteners with a single setup. The machine includes a laser pointer, stroke counter, and a robust, lockable cabinet for storing tools and accessories. Self-collection only, no delivery. If interested, please contact us.

Year of construction: 1979, condition: good (used), Hydraulic hose press, crimping tool, crimping machine, crimping jaws, crimping tool, hose press Ksdpfx Aszbirkemrolu -Manufacturer: Aeroquip, Hydraulic hose press type SQM 40 -Pressing pliers: size Ø 14 to 35 mm Accessories: see photos -Transport dimensions: 635/420/H220 mm -Weight: 32.8 kg

Condition: good (used), Clamping plate, plate field, welding table, welding table, clamping plate, scribing and measuring plate, measuring table, straightening plate, short-stroke heavy-duty cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine bending/straightening press Kljdpfx Aezbhqxemrsu -Mounting plate: Mounting plate with straightening press -Length: 3260 mm -Width: 1380 mm -Piston diameter: Ø 63 mm -Stroke: 200 mm -Pressure force: t -Overall dimensions: 3260/1380/H1940 mm -Weight: 2820 kg

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 683188, STC-Ref: G-022-7717 Kljdpfx Amszfimnsreu Heidelberg GTO-52, Year: 1985, Impressions: approx. 20 Mio. format: 360x520 mm, 1 colors equipped with: - powder sprayer - Varn Compac III - Minus-version --> available: 08/2026

Condition: used, 1 unit workshop press, GÜDE WP20T with various accessories, on a pallet Color: as shown in the pictures, see pictures and inspection Ksdpozcmcpsfx Amrjlu Condition: used Location of the goods: Hall 1 Payment method: prepayment by bank transfer Shipping: Self-collection only from the Hofgeismar location