Used Glass Crushers for sale (4,296)

Condition: used, • Throughput capacity: up to approx. 50 liters/minute • Tank volume: 0.3 m2 • Tank material: polyethylene (UV-stabilized) • Sedimentation granulate Sediflock: powder form (according to manufacturer specifications) • Sludge bag approx.: 70 kg • Compressed air: 6 bar • Power connection (depending on pumps): 2 kW, 400 V/50Hz – 3NPE • Dosing of sedimentation granulate: automatic • Serial number – B085.23 Dkodpfxjywizxs Ab Aow • Further information can be found below • Price on request

Condition: excellent (used), Year of construction: 2014, Vertical glass drilling machine, 1500 x 3000 Max. glass size: 1500 x 3000 mm Glass thickness: 3 – 20 mm Drilling diameter: 3 – 100 mm Control: NC controlled Dkodpfjy Nltnsx Ab Ajw Drilling heads: 2 opposing drilling spindles (front and rear) Spindle speed: Adjustable via inverter Total floor dimensions: 7500 x 2200 x 2800 mm Excellent condition Good working order, tested As is Available immediately

Condition: used, functionality: fully functional, Jaw opening: 500 x 300 mm Dksdpjy Tyaqofx Ab Asw Gap width: 30 - 80 mm Weight: 6,100 kg Power requirement: 22 kW The machine has been completely workshop-reconditioned and fitted with new crushing jaws and new side wedges.

Year of construction: 2023, condition: ready for operation (used), Max. glass thickness: 50mm, drilling diameter: 4-200mm, connected load: 1.5kW, weight: 270kg, the machine was never used. Dksdpfxjnp I N Ae Ab Aew

Condition: good (used), - Ready for immediate use - Feed speed: 0.5 - 5 m/min - Glass thickness: 3 - 55 mm - Can mitre grind up to 45° - 13 grinding and polishing wheels - Complete documentation available - Weight: 5700 kg - Has been regularly serviced and operated with a water treatment system, Dkodpotqr Hpofx Ab Aow - very clean machine - Connected loads: 26 kW, 400 V, 50 Hz, 6 bar

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Cone crusher product group is designed especially for the hardest material, cone crushers are one of the best choices for crushing river gravel, basalt and granite, along with abrasive materials in the mining industry. The working principle of cone crushers is to break the material by compression, by squeezing it between its walls, which are completely covered with resistant mantle and a bowl liner. It has longer life than other crushers thanks to its long life wear parts. Model: FABO CCS-440 Capacity: 300-550 t/h Max. Feed opening; EC 450 mm C 400 mm MC 300 mm Dkjdpfo Ah Hbgjx Ab Aew Motor: 220-250 kW, Head diameter: 1300 mm Dimensions (width * height): 3100 *2850 mm Countershaft Speed-rpm: 750-1200 Weight: 31000 kg * Hydroset Control * Automatic Load Protection * Practical discharge * High capacity cubic production * High-performance contactless labyrinth * High productivity, low energy production and lower wear costs, long service life and high product yield with desired fine powders. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Year of construction: 2016, operating hours: 158 h, functionality: fully functional, machine/vehicle number: GG6TKB-21932, total width: 4,201 mm, total length: 7,151 mm, overall weight: 2,250 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 6,100 mm, feed length Y-axis: 3,355 mm, pressure: 8 bar, cutting length (max.): 6,100 mm, Loading, cutting and break out machine for monolithic glass sheets with less than 158 working hours! Glass thickness automatic detection device enables automatic adjustment of machine parameters. Jumbo sheets: max. 6100x3355 mm, thickness 2–19 mm. Dkedpfjwnww Nox Ab Aow

Condition: new, Year of construction: 2026, functionality: fully functional, power: 170 kW (231.14 HP), fuel type: hybrid, color: other, Equipment: cabin, CONSTMACH V-70 mobile vertical shaft impact crusher, also known as the mobile sand making machine, is a high-efficiency mobile crushing and screening plant specifically designed for the production of high-quality fine aggregate. It delivers superior performance, particularly in the production of perfectly cubic sand with a grain size of 0-5 mm. Thanks to its advanced engineering, durable components, and long-lasting design, it offers maximum efficiency in different rock types of varying hardness, such as granite, basalt, dolomite, gabbro, and limestone. The V-70 model can directly process natural stones up to 35 mm in size, as well as materials obtained from primary or secondary crushing processes. With a production capacity ranging from 100 to 150 tons per hour, it can simultaneously produce 0-5 mm sand and three different aggregate fractions. Thanks to its user-friendly hydraulic-mounted mobile chassis, the plant is ready for operation in just a few hours at the installation site. The automation system is equipped with SIEMENS and SCHNEIDER electronic components, allowing all operations to be easily managed from a single tablet. Thanks to its compact design, the V-70 complies with international road transport standards and can be quickly transported to different construction sites using a king-pin-connected tractor. The system can also be equipped with an optional diesel generator, allowing for independent operation in areas where energy is needed. V-70 Mobile Vertical Shaft Crusher Technical Specifications Production Capacity: 100-150 tph Maximum Feed Size: 35 mm Feed Height: 4.5 meters Main Configuration: VSI Crusher + Vibrating Screen Total Motor Power: 170 kW Electric Generator Requirement: 400 kVA Plant Weight: 32 tons Plant Dimensions: 17.8 (L) x 3.35 (W) x 4.3 (H) meters Chassis Type: Single chassis with wheels equipped with hydraulic legs Dkjdpfoxqalxsx Ab Ajw Why Choose the V-70 Mobile Vertical Shaft Impact Crusher? CONSTMACH V-70 offers maximum efficiency, low maintenance costs, and superior quality in rock crushing and sand production. Its compact design makes it easy to transport, and its automation system requires minimal operator intervention. Its long-lasting components, high-performance VSI crusher system, and energy efficiency ensure the highest return on your investment. Manufactured with the CONSTMACH guarantee, the V-70 stands out in the industry with its durability, performance, and after-sales technical support. If you are looking for a reliable, fast, and economical solution for quality sand production, the V-70 is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Year of construction: 1988, condition: used, Glass edge grinding machine, Knopp, type 02-01, manufactured in 11/1988. Djdpfx Ajikn D Nsb Askw

Year of construction: 2010, condition: excellent (used), Schaltschrank mit Glastür und Kühlgerär auf Rollen Djdpfeiluykox Ab Ajkw 600 x 800 x 2.000 mm

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-Drum Crusher AUTO is ideal for compacting 30 to 220 Ltr drums / barrels, but also plastic and cardboard drums can be easily reduced to their minimum of volume. In many cases this compacted material can then even be marketed again. The drum press impresses with its ease of use, safe operation and high throughput quality. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Dsdpfx Aboc Spgue Ajkw Pressing force: 24 Ton Machine size: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction rate: 8:1 Cycle times: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB AUTO compaction cycles Compaction head with spikes to punch the drum to drain out any residual liquids Maximum safety standards by totally enclosed chamber 30 Ltr. collection tray with tap connection Useable for 30 to 220 Ltr. steel drums, plastic drums and cardboard drums A quality product “Made in Europe” Suitable for compacting Steel drums Plastic drums Cardboard drums Fiber and paper drums Optional extras Machine colour RAL Can and filter crush insert Multi head to compact inside a 200 Ltr steel drum Drum Crusher, Drum Press, Drum Compactor, Barrel Crusher, Barrel Press, Barrel Compactor

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2022KL2938, total width: 2,400 mm, total length: 3,400 mm, total height: 910 mm, overall weight: 900 kg, warranty duration: 12 months, • Glass cutting table SDRD FULL Tilted table which supports the process of manual cutting the glass, product designed and manufactured in Poland Length - 3400 mm Width - 2400 mm Height - 910 mm Breaking bar - 2 pieces in cross arrangement Bars steering - by foot pedals Air cushion system - installed Power of fans (air cushion) - 2,2 kW Air cushion system steering - by foot pedals and hand button Tilting of the top - pneumatical Stabilization of tilting - by hydraulic speed controller Support of quick tilting - by to gas springs Pull-out cantilevers of glass loading - yes, manually Covering of the top - grey felt Covering of the circumference - ash slats Wheels - 4 rotary, with increased load Levelling feet - 4 pieces installed Steel construction covering - polyurethane covering Filling of the lower beam in Dkjdeh Nx R Topfx Ab Aow stationary construction - vibrated, fibre reinforced concrete Table available from stock. Our company also delivers worldwide.

Condition: new, Year of construction: 2026, functionality: fully functional, number of drawers: 30, warranty duration: 12 months, Our company (EXPOGLASS®) manufactures machines, glass racks for the glass industry. Our offer includes a 321 x 255 pull-out glass rack. New product on request. Technical data : Number of drawers - 30 Size of panes - 2550 X 3210 for storage Load capacity of a single drawer - 1500 kg Loading space width - 80 mm Total storage width - 4460 mm Orientation (tilt side of drawers) - universal (depends on assembly) Number of positioning rollers per drawer - 8, bearing-mounted Construction - modular (combinable) Material of the front wheel of the drawer - floor friendly polyamide Dsdpfxoh Uudvj Ab Ajkw Rear wheel of drawer - steel - turned, bearing-mounted, with double flange, running on steel track We export our products all over the world.

Condition: good (used), Support: 2 x 300 mm, Supplied without the yellow glass loading fork, Height: 3100 mm, Dkedpfxotza Tde Ab Aew Width: 1140 mm, Length: 3810 mm

Condition: good (used), 200 bar / Class 1 / D9KA Application: Gas filling systems Djdpozfy U Aefx Ab Aekw Width: 185 mm Height: 210 mm Depth: 60 mm Weight: 1176 g Condition: good, second-hand

Condition: used, Year of construction: 1984, Glass bottle filler and capper equipped with short-tube filling valves for filling bottles to a specific level (volume filling). The bottles are pre-evacuated (11 kW vacuum pump from GEA Ahlborn). Additional title: Short-tube filler with pre-evacuation and crown cap sealer Capactity: 44000 bo/h Number of filling valves: 90 pcs. Number of capping heads: 15 pcs. Formats: 0,5 l NRW bottles; crown caps Material: housing and contact surfaces from stainless steel Dksdpfezi Alxsx Ab Ajw Base construction: caroussel-type filling and capping block Features: filling carousel with 90 short-tube filling valves; crown cap sealer with 15 sealing heads; vacuum pump; bottle and cap rinse; bottle conveyor with drives and format components; protective housing with doors; control cabinet with fittings; control panel with touchscreen

Condition: excellent (used), Year of construction: 2021, operating hours: 120 h, functionality: fully functional, total height: 2,500 mm, total width: 3,000 mm, total length: 10,000 mm, TECHNICAL DATA * Standard dimensions of vacuum bags: 2650 x 5,150 mm * Dimensions for flat glass lamination (using silicone bags): 2,500 x 5,000 mm * Lamination frames: two * Maximum load per lamination frame: 1,200 kg distributed over the entire surface. * Vacuum pumps: two (one for each frame) * Heating zones: 9 zones, each monitored by a thermocouple. * Temperature measurement of heating chambers: 9 + 1 thermocouples connected to the PLC system. * Vacuum control and monitoring: Digital pressure sensors connected to the PLC system on the operator panel. * Overheat protection: one independent thermocouple inside the chamber, with the ability to cut off the power circuit in case of furnace overheating. * Electrical panel, control panel, and wiring: manufactured according to "EC" guidelines. * Safety features: according to "EU" guidelines. * Installed power / power supply: 54 kW per chamber. 400V 50 / 60Hz, three-phase + N + T * Average consumption: < 20 kW per hour. * Control / monitoring system with TEMA 2020 SOFTWARE: -PLC system and intuitive operator graphic interface with touchscreen. -Multilingual -Up to 6 (six) settings, with no time limitations. -Real-time graphs: average temperature of the furnace and modules, each heating zone, vacuum (with the possibility of disconnecting the pump at any time). -Power consumption. -Historical archive of data from the last 500 hours of production, displayed in a graphic and text file. -Log of all operations and alarms. -Program < EASY MAINTENANCE > for vacuum pumps. Djdpfjz Ihikjx Ab Askw -Delayed start of the process (for night use) -kW meter. -Remote control from various devices (smartphone, tablet, computer, etc.) -Report of the entire lamination process downloadable via USB. -Remote assistance LIFT – lifting platform * Lifting platform with servomotor assistance to align the lamination frames with the laminating frame. Essentially consists of a single hydraulically controlled lifting platform, equipped with appropriate tracks for moving the lamination frame.

Condition: good (used), Year of construction: 1999, The system is electrically adjustable and has a total of 24 compartments. Dkjdpfx Abozn U Atj Ajw 2 compartments with a 210 mm shelf height and 22 compartments with a 150 mm shelf height. External dimensions: Height: 3520 mm Width: 8630 mm Depth: 3520 mm Condition: good, second-hand

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, total width: 2,500 mm, total height: 3,500 mm, input voltage: 400 V, feed length X-axis: 2,500 mm, feed length Y-axis: 3,500 mm, overall weight: 3,550 kg, type of input current: three-phase, power: 17.06 kW (23.20 HP), Equipment: documentation/manual, Used Lisec VL-1N/25 insulating glass manufacturing machine for sale, year of manufacture: 2009. Type: VL-1N/25 Djdpfx Absz Nkh Ts Askw Serial number: 361-053012 Weight: 3,550 kg Total load current: 24.60 A Apparent power: 17.06 kVA Voltage: 3/N/PE-50Hz 400 V Pressure: 6.00 bar Maximum material load: 250 kg/m Auxiliary current: 8.0 A AC/DC voltage: 400 / 24 V LISEC VL-1N/25 automatic thermal insulating glass sealing robot – 2500 x 3500 mm. Automatic edge sealing machine designed for applying secondary sealant to thermal insulating glass units. The machine consists of an infeed and an outfeed section, as well as a discharge station. A separate measuring unit located in front of the machine measures the thickness of the glass panes, the air gap between them, and the total thickness of the thermal insulating glass unit. The top edge of the thermal insulating glass unit is guided by a horizontal roller beam. This allows the glass units to pass at a defined distance in front of the back panel in the sealing sections. They are transported using a patented, wear-resistant conveyor chain, which supports the lower edge of the unit only minimally, leaving the sealing groove free for the application of the sealant. A linear-guided vacuum suction system integrated into the back panel ensures that the thermal insulating glass units are transported without slipping. The machine can also process polyurethane in 200-liter containers of component "A" + 20-liter containers of component "B", as well as silicone in 200-liter containers of component "A" + 20-liter containers of component "B". The machine can be viewed in operation and will be dismantled in mid-January. If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Year of construction: 1990, cone-diameter: 2.100 mm (7ft) feed size: -140 mm E-motor 250 kW weight approx. 100 t. Djdpfelimuzox Ab Aokw hydraulic and control in separate container

Condition: new, functionality: fully functional, power: 200 kW (271.92 HP), overall weight: 17,500 kg, Year of construction: 2026, Model 440 Cone Crusher is designed for secondary and tertiary crushing applications, delivering high performance, durability, and consistent product quality. With its robust chassis and heavy-duty construction, it is suitable for crushing hard and abrasive materials such as granite, basalt, limestone, and river stone. The crusher is equipped with a high-capacity crushing chamber and a powerful drive system, ensuring efficient material reduction and stable operation even under demanding conditions. Its optimized cone geometry provides excellent cubic product shape while maintaining high throughput. Dodpfx Abeyidtvo Aokw The hydraulic adjustment system allows easy setting changes and overload protection, reducing downtime and simplifying maintenance. Wear-resistant components and quality bearings extend service life and lower operating costs.

Year of construction: 2023, condition: as good as new (ex-display), hydraulic tappet to fit any shredder or rotary shear . currently on sale mounted on a dechipper for destruction of hollow bodies . Dkodpfxsvitq As Ab Aow

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,600 mm, total length: 3,400 mm, total height: 910 mm, overall weight: 950 kg, input current: 16 A, warranty duration: 12 months, input voltage: 400 V, GLASS CUTTING TABLE – MANUAL – BRAND NEW Model: SDRXL FULL Year of manufacture: 2026 – brand new Manufacturer: EXPOGLASS® (Poland) – for over 11 years we have been supplying glass cutting tables to workshops on 3 continents. Our background in flat glass processing has allowed us to design equipment with exceptional durability and functionality. Standard equipment: Manually extendable supports for vertical loading (with replaceable ash wood blocks), 4 swivel polyamide wheels Ø80 mm for heavy loads, 4 adjustable leveling feet, Worktop covered with highly durable black felt + ash wood edge strips, Two steel plates mounted underneath for easy unloading with a forklift, Lower beam filled with reinforced vibrated concrete for maximum stability, Pneumatic tilting with hydraulic speed controller, Longitudinal and cross breaking bars, pneumatically operated by foot pedals, Air cushion with integrated 2.2 kW high-pressure fan for easy handling of heavy glass sheets, Adjustable breaking bar height. Technical data: Weight: 950 kg Table size: 340 × 260 cm Height: 91 cm (adjustable ±2 cm) Power supply: 400 V, 50 Hz, 16 A plug (5 pin) Air connection: 7 bar, standard 7.2 NW fitting Documents & warranty: Declaration of conformity with EU Machinery Directive, Dkedef Svtkjpfx Ab Aew CE marking, EU EMC declaration, Warranty: 12 months, Operating manual (Polish & English). Condition: brand new, ready for immediate use. Delivery: we organize worldwide transport (EU and beyond).

Condition: new, Year of construction: 2025, functionality: fully functional, SLIDING RACK / STORE FOR GLASS R220-20 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Our sliding rack has the form of slightly inclined drawers. The partitions move on one side along a rail and on the other side along a flat bar what prevents tripping over and enables the easy positioning on the forklift guides. The inclination of the rack depends on assembly and the flat bar location is also determined at this stage. Owing to our rack design, we are able, as one of few manufacturers, to produce a universal store. Our customers can assemble and disassemble their racks as they wish at any time they want (when changing a hall, a registered office, etc.). We recommend this storage rack especially to companies which want to use their space effectively and obtain fast and easy access to a given type of glass. The racks are delivered for self-assembly in a package (with assembly instructions). The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. R220-20 RACK TECHNICAL DATA Intended use – boxes for glass panes 255 cm x 321 cm Permissible load-bearing capacity of a single partition – 2500 kg Permissible load-bearing capacity of the whole rack – 50000 kg Number of partitions – 20 Whole partition weight – 130 kg The width of the storage strip for glass – 22 cm Total height (A) – 234 cm Dedpfjf Thtrsx Ab Askw Total width (B) – 304 cm + (20 cm glass lock) Total length (C) – 754 cm The length of guide rails (D) – 754 cm Clearance between drawers (E) – 80 cm Requirements for the ground – concrete floor (levelled) Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating Partitions inclination – left or right – depending on assembly Glass lock – YES (manual) Sliding possibility – max. 8 drawers at once The arrangement of end drawers – fixed (directed towards each other) Possibility of locking partitions between each other – YES (manual) Number of assembly workers – 4 Loading glass onto the rack – manual, gantry, forklift, HDS Flat bar size – 200 mm x 10 mm x 7541 mm (width x height x length) Guide rail size – 120 mm x 120 mm x 7541 mm (width x height x length) DOCUMENTS ATTACHED TO R220-20 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty This product is delivered to customers in the form of elements for assembly. We also deliver our racks to the EU countries and other countries.

Condition: good (used), Vacuum Glass Chamber Exsiccator The glass cylinder and glass lid allow reactions and the behavior of various liquids/substances/products to be visibly tested under vacuum. Easy handling and operation Numerous connection options Volume of 13.9 liters Good and easy cleaning options Weight 14.5 kg Application areas: Laboratories, e.g., for reaction tests under vacuum Production, e.g., drying of components Universities, e.g., for demonstrations Research, e.g., curing of plastics Vacuum Glass Chamber Exsiccator Possible accessories/variants: Development Various sizes of glass vacuum chamber available Various pumps for vacuum generation available Heating plate Vacuum feedthroughs Adapters Dsdpfx Absdcpapj Ajkw Vacuum hoses Data on the glass chamber Made of safety glass Seal made of Viton Glass lid can be easily removed Articulated plastic feet for a secure stand Leak rate less than 0.1 L/s External dimensions: Ø=320mm x 420mm Internal dimensions: Ø=230mm x 330mm 12 x 1/4 inch connection options