Used Glass Bead Blasting for sale (4,241)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3388, total length: 2,100 mm, total width: 1,300 mm, total height: 2,200 mm, overall weight: 950 kg, input voltage: 400 V, input frequency: 50 Hz, Glass mixer, high-speed/emulsifying, crusher/mixer Glass VAS-150 Machine type: VAS-150 Machine number: 3388 Year of construction: 2011 400 V, 3 Ph, 50 Hz Power 16,085 kW Weight: 950 kg Capacity: 150 liters Overall dimensions: 2100 mm x 1300 mm x 2200 mm. Automatic lid operation Automatic loading possible Hnsdpjvzt Uljfx Aacsu Drum can be rotated by motor U-shaped crusher or knife head Discharge height according to user requirements Lid wiper EasyClean drain valve flush with the drum wall Integrated vacuum pump Temperature control equipment Dosing devices Cooling equipment Direct steam injection

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 02/2009, - thickness of glass - from 3 to 12 mm, - maximum glass format 6100x3300 mm, - working height 950 mm +/- 30mm. ( adapted to the line), - overall dimensions (length x width x height) 8500x4300x1700 mm, - feed speed on belts up to 40 m/min, - glass feed speed on the cushion up to 40 m/min, - power supply voltage - 400V, 50Hz, - total installed power - 10 kW, - compressed air supply with a pressure of 7 bar, - maximum air consumption of 1100 NL/min, - glass presence sensor - OK. - automatic positioning of the glass sheet - OK. - RAL color - according to the order, - outer edges of the table made of hard wood, - table top covered with black felt with a thickness of 4mm, - guide and drive system protected against dirt, - guides and gear rails surface hardened, - on the bridge was mounted glass transport suckers, - on the bridge mounted stop buffers for manual cutting of glass. - the table has a solid frame construction, - the table is equipped with a system of sensors (electronic and mechanical), - top of the attachment covered with black felt with a thickness of 4mm, - oil during cutting dispensed automatically to both wheels simultaneously. - double-sided cutting, - breaking of the upper cut - breaking roller, - breaking of the bottom cut - breaking bar, - sheet separation - cutting knife, - adjustable parameters heating time; separation time, cutting delay - they depend on the thickness of the cut VSG. - heating of the cutting place - a set of radiators - max thickness of VSG glass - not exceeding 12mm in total, - max width of cutting 4000mm, - working height adapted to the height of the table, - overall dimensions of the table (length x width) 1500 x 47000 mm, - glass transport speed - adapted to the table - total installed power ~ 17kW - supply voltage - 400V, 50Hz - compressed air supply with a pressure of 7 bar, - manual and automatic cutting function, IV. basic technical data of glass breaking station type.GS6-3/2 - the table has a solid frame construction, - the table has an air cushion to facilitate the movement of glass, - control of breakers and fan is done by pedals, - glass thickness from 3 to 12 mm, - max glass size 3300 x 6100 mm, Hnodpjvdaf Asfx Aacsu - working height adapted to the height of the table, - overall dimensions of the table (length x width) 3600 x 6000 mm,

Condition: reconditioned (used), Year of construction: 2018, STORK VS 24/8 Monobloc Bottling Line, fully refurbished by the professional company Z.M. ROBAK. The machine is virtually unused, with the protective film still on the housing. Currently, it is set up for filling glass containers – it has been test run for bottling alcohol. Filling valves: 24 pcs (with light vacuum for still beverages) Capping heads: 8 pcs (configured for aluminum screw caps) Output: approx. 7,000 bph (700 ml) Capable of operating with bottles of the following dimensions (after format adjustment): - Diameter: 45 mm to 110 mm - Height: 105 mm to 400 mm - Standard neck diameter: 28 mm - Optional neck diameter (after format change): 18 mm to 43 mm Machine dimensions: - Width: 2,900 mm - Height: 2,200 mm - Depth: 2,200 mm Weight: 3,200 kg Installed power: 5.5 kW Required air pressure: 0.6 MPa Hjdpfxou Nhiqo Aaconu Year of manufacture/modernization: 2018 – has not been used in production since refurbishment Condition: The machine is practically as new, with negligible signs of use. The machine comes with original electrical documentation.

Condition: excellent (used), Year of construction: 2020, CATALYTIC COATING EQUIPMENT Hjdpfx Asvcc Epoaconu

Condition: excellent (used), The line for gnocchi includes: - GLASS (Germany) cooking kettle, type PRO-3, tilting, 500 ltr. capacity , with mixing, vacuum and cooling - bin loader for 200 ltr. bins feeding the dough into the forming machine Hnedpfx Aajfwmt Ujcou - SANDORE (Italy) forming machine , type NF 100 C, power 8.5 kW - segment feeder, type Z, feeding the product to the vibrating tunnel, width: 400 cm, height 200 cm, drying and cleaning the product (vibrating screens, blowing turbines) - SARP (Italy) vibrating tunnel, type STR 4107, power 4.7 kW - SARP (Italy) waste and water separator, model FILTRO, with vacuum extraction from a vibrating tunnel, power 2.2 kW - conveyor feeding to the weighing machine, type Z, height 500 cm - weigher platform with stairs, dimensions: 500 cm x 500 cm on posts 220 cm high - BVBA (Belgium) 10-head weigher, type 01AAH / WS - TIROMAT BL-150 (Italy) packing machine, type ETI 422N, linear packing machine for vacuum packing, 2 dimensions of forms - segment conveyor that discharges the finished product to the carton boxes packing warehouse, a spiral conveyor that outputs packages to a height of 260 cm + a straight section of 20 meters

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, Sanken Lasin laminointi kone Eva kalvolle , Prosessi esim Pujolin kalvolle Mitat 4100 x 2200 x 2250 paino 3350 , 4 petiä , petien koko 3200 x 1700 Hnedpfxov Idb No Aacou

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: GM-1400H, total width: 3,000 mm, total length: 5,000 mm, total height: 3,250 mm, type of input current: three-phase, energy consumption: 60 kWh, input current: 80 A, workpiece weight (max.): 2,720 kg, power: 48 kW (65.26 HP), workpiece height (max.): 950 mm, warranty duration: 1 months, working range: 319 mm, number of chambers: 3, Equipment: adjustable chassis, Conveyors are produced in such a way that they will not scratch the glass and leave no stains. The machine is made of steel and aluminum materials. Thanks to specially designed water sprays and brushes, the glasses comes out completely free from oils, stains and dust and cleaned. Angles of water nozzles will be adjustable. Conveyor rollers are produced of Ø 55 mm vulcanized rubber . Induction hardened gears are used in transmission gears. There will be 3 Washing Cabins, pre-washing, washing and rinsing washing system. In the pre-washing section, the upper and lower surfaces of the glass are washed with high-pressure spray nozzles. In the same cabin ,will be compressed air to the upper surface of the glass with air knife and the water will be completely cleansed. Thanks to this process, the glasses will go into the wash without entering the brush washing compartment, free from their dirt. There are 6 Brushes (Ø 120 mm.) in the Washing Machine and they will be able to wash laminated glasses. 2 of the brushes will be in the inlet (pre-wash) and 4 in the outlet (rinse-wash). there are brushes in total, 2 piece of them at the entrance and 4 pieces at the exit. 2 of the brushes will be suitable for laminated glass washing. the other 4 brushes will be for normal standard use. Features of brushes to wash laminated glass is ; Bristle material will be 6.6 P.A. The bristle diameter will be 0.15mm. The bristle length will be between 30-35 mm. Brush shaft will be produced of ASI 304L quality stainless material. During washing, the brush suitable for the laminated coated glass, whose properties are given above, will come into contact with the surface of the glass. To the other part of the glass will come into contact standard glass washing brush. The washing and air drying section will have an elevator system with a 350 mm opening and closing structure for maintenance and cleaning. Thanks to the elevator, the glass thickness (3-19 mm) can be adjusted easily. The speed of the conveyors will be adjustable between 0 m/min and 5 m/min. There will be a sound insulation cabinet in the drying fan. 1 piece of G4 filter and 1 piece of F7 filter will be at the air inlet of the drying fan . The filters will be of standard size and can be changed and will be 592*592*20 mm square type. 23. Thanks to the powerful air knives, the glasses will come to the exit conveyor dry. The height of the air knives will be adjustable. All pipes and hoses in the machine will be in a matte color to prevent algae formation in daylight. 26. Digital displays and many electronic equipment will be Delta or Schneider brand. Hjdpfxer Ak Exo Aacjnu There will be a stop sensor at the exit of the conveyor to prevent the glass coming from the machine from falling to the ground. There will be lighting system in the washing exit area for quality control from the bottoms and top of the conveyor towards the glasses. These lightnings will have the ability to be switched on and off separately. There are 3 separate water tanks in the machine. There will be an overflow water line that will prevent the water in the water tanks from overflowing.

Condition: excellent (used), Year of construction: 2018, HYDROPHOBIC COATING APPLICATION DEVICE Hodpfxjvcc D Ej Aacjnu

Condition: excellent (used), Year of construction: 2016, Jumbo glass turntable Hnodpfxjvccn Ds Aacsu

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 08/2016, Automatic glass gantry with loading sotl with a set of rails 15 m long year of production 2016 in continuous production Hnodpfxeur N Hns Aacju

Condition: excellent (used), Year of construction: 2020, Automatic glass gantry with loading sotl with a set of rails year of production 2020 Hnjdpfjva E Izox Aacsu Uuwiqbzorl

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1000030194, table length: 4,500 mm, table width: 3,000 mm, TECHNICAL DETAILS Table dimensions: 3000 x 4500 mm MACHINE DETAILS Hnodpfx Aexdkxijacsu Supply voltage: 400 VAC Rated current at full load: 5.04 A Number of supply phases: 3 Power: 2.7 kW Frequency: 50 Hz Note: The machine will be available from 02/12/2025!

Condition: used, Used Tycon approximately 6,000 litre working capacity and 7115 litre total capacity type 808 blue glass lined receiver vessel. Unit measures approximarely 2,000mm diameter x 1680mm straight side. Unit has welded dished top and bottom heads. Internal rated full vacuum/2 bar design pressure at -10/+200 degC. Unit mounted on (4) mild steel legs. Hnedpfx Aaoxnl H Nocju Specifications: Capacity: 1,585 gal Condition Of Glass: Used Internal Pressure: 14.5038 psi Internal Temperature: 392°F Vertical/Horizontal: Vertical Diameter: 78.74" Straight Side: 1680

Condition: like new (used), Year of construction: 2017, operating hours: 40 h, functionality: fully functional, machine/vehicle number: 1000018153, total width: 3,145 mm, total length: 4,250 mm, total height: 900 mm, overall weight: 2,000 kg, input current: 17 A, warranty duration: 3 months, type of input current: AC, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 3,710 mm, feed length Y-axis: 2,600 mm, feed length Z-axis: 40 mm, pressure: 7 bar, machine base height: 900 mm, cutting length (max.): 3,710 mm, Intermac cutting table RS-A, glass cutting thichness from 2 to 19mm. Max size 3710 x 2600mm. Table include: air cushion Hodpfx Aaexlu Tgeconu 3 breakout bars tilting arms for loading/unloading glass Shape scanner. Include optimazer software PerfectCut and Icam drawing cad. It has all the original documentation and original transport brackets. Machinery Installed in 2017, never been used, 34 operating hours. It is in a like new condition. We can offer installation and training.

Year of construction: 2019, operating hours: 325 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: BL 6000000, TRIVENTEK BL60 DRY ICE BLASTING MACHINE Includes 6 m blast hose + ice gun (applicator). Nozzle box and special ice splitter nozzle included. 325 operating hours Machine in good condition, immediately ready for use. Worldwide Shipping. Cold Jet dry ice machine for sale dry ice machine for sale dry ice blasting machine for sale Hnodpfx Aoxnl Akjaceu Dryice blaster for sale buy dry ice blasting machine Dry ice blasting machine – dry ice blasting | dry ice machine | dry-ice blaster Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machine for sale Dry ice blasting machine for sale Dry ice blasting machines Cold Jet various models Servicing and repair of Cold Jet dry ice machines

Condition: used, Second hand Automatic shape glass cutting table (Regular), Bottero Type 352 BCS - R, Year 2006 Hnodpfx Aoxpibmjacou

Year of construction: 2012, condition: excellent (used), machine/vehicle number: 12000609820, 1 X Valera by Coreco stainless steel glass froster/chiller, model EC-85 Technical specification ⚙️ Hnedpfx Aajxc Uhxscou ✅ Manufacturer - Coreco ✅ Model - EC-85 ✅ Serial Number - 12000609820 ✅ Date of manufacture - 2012 ✅ Condensation - H ✅ Refrigerant - R-134a ✅ Electric Supply - 230 V, 1 Phase, 50/60 Hz ✅ Temperature Range: -10°C to -6°C ✅ Nominal Power - 288 W ✅ Amp 1.3 A

Condition: used, Used Pfaudler model CE10000 vertical glass lined reactor. Approximately 10,000 litre capacity. Internal rated 6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 7.5 bar/full vacuum design pressure at -29 to 200 deg.c. Unit has welded dished top and bottom heads. Top entry 3-blade retreat curve agitator with Pfaudler VSO gearbox and drive. Unit has mild steel mounting ring. Specifications: Capacity: 2,641.7 gal Material of construction: Glass lined, External mild steel jacket Internal pressure: 87 PSI Jacket pressure: 108.778 Hedpoxm T Hbsfx Aacenu

Condition: like new (used), operating hours: 12 h, i3 Microclean UPGRADE DX PALLET SHAVING (€2,000) Like New – 1-Year Warranty Includes hoses and multiple nozzles. This machine is designed for industrial cleaning, scaling, and large-scale projects. A key advantage of this unit is its minimal use of new-generation electronics, resulting in enhanced reliability. The i3 Microclean is among the most powerful and aggressive machines currently available on the market and is in excellent condition. COLD JET machines are suitable for industrial cleaning, heavy-duty decontamination, and large projects. The absence of complex, modern electronics ensures maximum operational reliability and simplified maintenance. This machine remains in outstanding condition. Cold Jet i3 Microclean & Dry Ice Press – Complete Blasting Solution, Including the Following Equipment: • COLD JET i3 Microclean (12 operating hours) • 1 x 20’ blasting hose • 1 x Cold Jet applicator Hedpfxjxga Tzs Aacenu • 1 x nozzle Price: €24,500 This is one of the most highly regarded dry ice cleaning systems globally. With no sensitive electronics, it offers exceptional reliability and cost-effective maintenance. For inquiries or to schedule a viewing, please contact DrDryice. All machines come with a 1-year warranty. Cold Jet machine repair and maintenance services available. We also supply new Cold Jet machines – contact us for details. Worldwide shipping available. Cold Jet dry ice machine for sale dry ice blasting machine for sale dry ice blaster for sale buy dry ice blasting equipment Dry ice blasting machine for sale Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machines for sale dry ice blasting systems – various Cold Jet models available Cold Jet dry ice machine repair and maintenance i3 Microclean Dry ice press

Condition: used, Year of construction: 2015, Second hand automatic shape glass cutting table (jumbo), Intermac Type Genius 61 CT, year 2015 Hnedpfxexpia Ns Aacju

Condition: used, Used DeDietrich model CE10000 vertical glass lined reactor. Approximately 10,000 litre working capacity & 11,710 litre total capacity. Internal rated 6 bar/full vacuum design pressure at -25 to 200 deg.c. External mild steel jacket rated 6 bar/full vacuum design pressure at -25 to 200 deg.c. Unit has welded dished top and bottom heads. Top entry 3-blade retreat curve agitator with drive. Unit is mounted on (4) legs. Specifications: Capacity: 2,641.7 gal Hjdpfx Aaoxlgigjcjnu Material of construction: Glass lined, External mild steel jacket Internal pressure: 87 PSI Jacket pressure: 87 Legs/lugs: 4

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 9 h, i3 Microclean & Dry Ice Press (can possibly be purchased separately) !!!! Condition: Like New | 1-Year Warranty Includes hoses and multiple nozzles. This machine is suitable for industrial cleaning, from detail work to very large-scale projects. A key advantage of this unit is its lack of new-generation electronic components, ensuring durability and ease of maintenance. It is one of the most aggressive and effective dry ice blasting machines on the market. The machine is in excellent condition. The COLD JET machine is ideal for industrial cleaning, tackling both small and large jobs. Its straightforward, electronics-free design makes it exceptionally reliable and cost-effective to maintain. For sale: Complete Cold Jet i3 Microclean & Dry Ice Press Blasting Package, comprising: Hnjdpow In Iwefx Aacju COLD JET i3 Microclean (Only 9 operating hours) - 1 x 20’ (6 m) Blasting Hose - 1 x Cold Jet Applicator - 1 x Nozzle Price: €27,500 Recognized as one of the best machines in its class worldwide, the absence of electronic systems enhances its reliability and reduces maintenance costs. For inquiries or to schedule a viewing, please contact us at DrDryice. All machines sold are covered by a 1-year warranty. We offer repairs and maintenance services for all Cold Jet machines. New Cold Jet machines are also available—please contact us for more information. Worldwide shipping available. Key search terms: - Cold Jet dry ice machine for sale - Dry ice machine for sale - Dry ice blasting machine for sale - Dry ice blaster for sale - Buy dry ice blasting machine - Dry ice blasting equipment – dry ice blasting | dry ice machine | dry ice blaster - Cold Jet Aero 30 for sale - Cold Jet Aero 40FP for sale - Cold Jet Aero 40HP for sale - Cold Jet Aero 75 for sale - Cold Jet Aero 75 DX for sale - Used Cold Jet machine for sale - Dry ice blasting machines – various Cold Jet models - Service and repair of Cold Jet dry ice machines - i3 Microclean - Dry Ice Press

Condition: used, Year of construction: 2016, Second hand straight line edging machine, Bavelloni, Type VE500 -11, Year 2016 Hodpfx Aaoxph U Secsnu

Condition: used, Used Pfaudler BE5000 vertical glass lined reactor. Approximately 5,000 litre capacity. Internal rated 6.6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 6.6 bar/full vacuum design pressure at -29 to 200 deg. Unit has welded dished top and bottom heads. Includes top entry 4-blade CBR Turbine type agitator driven by a 10.5 kw 415 volt 292-1460 rpm 3/50 motor. Unit is mounted on lugs. Hnodpfx Aaoxgft Tecsu Specifications: Capacity: 1,320.9 gal Material of construction: Glass lined steel Internal pressure: 96 PSI Jacket pressure: 95.9753 Legs/lugs: 0

Condition: used, Used Framax glass bottle filling line with capacity approximately 2900 bottles / hour made in 2017 and used for approximately 2500 hours. Equipment includes isobaric bottling machine model Modulblock RFC1-16/16/1-DPS/C and also depalletiser, packer (box former, 24 bottles/box). Previously used for craft beer and RTD (Ready To Drink) carbonated pre-mixed alcoholic drinks. Equipment list and additional photos available on request. Hjdew U A Ifepfx Aacjnu