Used German Cars for sale (11,874)

Condition: new, empty load weight: 159 kg, maximum load weight: 591 kg, overall weight: 750 kg, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 1,500 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, Driving license B trailer UNITRAILER Garden Trailer 230 KIPP [with support wheel, additional drop sides, high tarpaulin and high bows] Transport trailer UNITRAILER Garden Trailer 230 KIPP is the latest product from UNITRAILER. It is currently our largest car trailer with a maximum permissible weight of up to 750 kg. The trailer has a folding tailgate, which enables loading and unloading in just a few minutes. Thanks to the tiltable drawbar, it can be placed vertically on the rear wall. We will take care of all the formalities associated with the purchase for you. The trailer will be delivered to the address you specify within 8 working days together with the registration documents. Once you have received the trailer, you only need to register and insure it to be able to use it in full. Lrjdpet Id Avefx Abyeu In addition, our car trailer can be used thanks to its tiltable drawbar. This makes it much easier to load and unload goods that you would normally have to lift or put down. This solution is also most often found in much more expensive trailers, which significantly affects the better feeling of using them. Another advantage of this solution is the ability to hold the trailer vertically with the drawbar folded in and resting on the rear dropside. So you don't have to worry about the trailer taking up a lot of space in the garage or not fitting because of the protruding drawbar. You can even put it on the front of the building or anywhere!

Condition: new, empty load weight: 118 kg, maximum load weight: 632 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 1,475 mm, loading space width: 1,063 mm, loading space height: 700 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, Car trailer New Garden Trailer 150 KIPP with additional drop sides, support wheel and gray flat cover New Garden Trailer 150 KIPP trailer from UNITRAILER with a GVW of up to 750 kg has a hinged rear dropside so that loading and unloading is possible in just a few minutes! By using a tiltable drawbar, it can be positioned vertically anywhere on the rear dropside. All formalities in connection with the purchase are taken care of for you. The ordered goods with enclosed documentation will be delivered to the address you specify in Germany/Austria within 6 to 8 working days. Once you have received the car trailer, all you have to do is register it. Lrsdpfx Abjt Id Skeyju Advantages of a Garden Trailer 150 KIPP car trailer If you decide to purchase our new car trailer, you will receive a 2-year warranty. Each product comes with a user manual and a warranty booklet. All the most important documents come with the purchased trailer. In addition, you can purchase accessories in the form of drop sides, support wheels or anti-theft protection at any time. If you have any questions or doubts while using the car trailer, you can contact our specialists at any time. You can also use the tiltable drawbar to tilt your car trailer. This makes loading and unloading goods that you would normally have to lift or lower much more convenient. This solution is also most commonly found on more expensive car trailers, which contributes significantly to a better user experience. Another advantage of this solution is that the car trailer can be stored vertically, with the folded drawbar resting on the rear dropside. So you don't have to worry about the trailer taking up a lot of space in your garage or not fitting because of the protruding drawbar. You can even put it on the front of the building or wherever you want!

Condition: new, empty load weight: 159 kg, maximum load weight: 591 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,641 mm, loading space width: 1,256 mm, loading space height: 1,100 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, Transport trailer UNITRAILER Garden Trailer 264 KIPP is the latest and largest product. The trailer has a folding tailgate. This makes loading and unloading possible in just a few minutes! The trailer can be placed vertically on the rear wall by using the tiltable drawbar. We take care of all the formalities associated with the purchase for you. The trailer will be sent to the address you specify together with the registration documents within 7-14 working days. If you decide to buy our new car trailer, you will receive a 2-year warranty so that you can use it without worrying about damage. Each product is sent with an instruction manual and a warranty booklet. All important documents will be sent to you together with the purchased trailer. Furthermore, you always have the option of purchasing additional equipment in the form of additional drop sides, jockey wheel or anti-theft device. If you have any questions about this model, you can contact our advisors at any time. Lsdpst I Rh Ssfx Abysru Our car trailer has a tiltable drawbar. This makes it much easier to load and unload goods that you would normally have to lift or put down. Another advantage is that you can place the trailer vertically with the drawbar folded in. The Garden Trailer 264 KIPP is made of galvanized steel and is therefore resistant to rust and weathering. If the trailer is only stored outdoors, we recommend purchasing a flat cover for additional protection. The tiltable drawbar allows the loading area to be tilted. This makes loading and unloading the goods very easy and takes extremely little time. To meet the expectations of our customers, we offer the Garden Trailer 264 KIPP with folding drawbar at an exceptional price. With this trailer you can safely transport building materials, furniture or large equipment. You can dismantle the rear wall at any time by removing it from the brackets. From now on, you will be able to transport many more things at once. The Garden Trailer 264 KIPP car trailer has a hinged rear drop side. This makes loading and unloading very easy. It is also possible to transport long goods or materials with the dropside open or removed. Simply remove it from the brackets and you are ready to transport various types of pipes, wood, floor panels and other long objects!

Condition: new, empty load weight: 210 kg, maximum load weight: 540 kg, overall weight: 750 kg, axle configuration: 2 axles, loading space length: 2,641 mm, loading space width: 1,256 mm, loading space height: 1,100 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, Two-axle trailer Garden Trailer 264/2 KIPP We hereby offer the largest unbraked car trailer with transport area dimensions of 264x125 cm, with which you can transport large loads. The Garden Trailer 264/2 KIPP model is a trailer that makes all your transportation tasks easier. Do you want to transport a large amount of wood? No problem! New household appliances or electronics? Nothing could be easier! From now on, no task will be daunting. With your own trailer, you don't have to pay too much at the rental store and you don't have to rely on the goodwill of your friends and neighbors. You can transport everything you need yourself, and loading and unloading is made easier with an inclined drawbar. Lrodpfot I Rqmjx Abysu Technical parameters of the Garden Trailer 264/2 two-axle trailer CHASSIS - two unbraked axles from the renowned AL-KO or KNOTT company. Tiltable V-drawbar with a ball coupling. All-season 155/70 R13 tires, which compensate for uneven road surfaces and enable a comfortable ride with the trailer. The supporting frame is made of bent steel profiles, hot-dip galvanized, bolted together. BODY - floor made of high-quality, waterproof, non-slip plywood, 9 mm thick with dimensions of the transport area: 2640 mm long x 1250 mm wide. Overall dimensions of the trailer: 3541 mm long x 1690 mm wide x 1120 mm high (with frame and tarpaulin) SIDES - Total height 30 cm made of durable galvanized steel, corrosion-protected. Multiple bends for greater rigidity. With brackets for the tarpaulin rope for correct tensioning of the tarpaulin. The rear side wall can be opened and completely dismantled.

Year of construction: 2025, condition: new, Model 2022 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) Ljdpefz D Etefx Abyeru - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Year of construction: 2025, condition: new, Model 2022 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. Lredpfx Aefz D E Nobysu - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Year of construction: 1991, condition: good (used), coil weight: (2 x 15 t) / 1 x 30 t coil width: max. 1.900 mm coil OD: max. 1.900 mm Lrjdpfsbh Dg Sox Abyou

Condition: excellent (used), Year of construction: 1997, Permissible total weight: 750 kg Unladen weight: 140 kg Payload: 610 kg 1 axle, tire size: 13" Lredpfxed Eckxs Abyou Internal dimensions of the box: 2010 x 1255 x 330/430 mm Overall length: 3250 mm Overall width: 1700 mm Overall height: 920 mm

Condition: new, empty load weight: 136 kg, maximum load weight: 613 kg, overall weight: 750 kg, tire size: 155/70 R13, Year of construction: 2024, Tiltable 750 kg car trailer UNITRAILER Garden Trailer 200 KIPP with additional drop sides, support wheel and flat tarpaulin The Garden Trailer 200 KIPP car trailer from UNITRAILER with a GVW of up to 750 kg has a hinged rear dropside so that loading and unloading is possible in just a few minutes! By using a tiltable drawbar, it can be positioned vertically anywhere on the rear dropside. All formalities in connection with the purchase are taken care of for you. The ordered goods with enclosed documentation will be delivered to the address you specify in Germany/Austria within 3 to 7 working days. Once you have received the car trailer, all you have to do is register it. Further information can be found at the following link - Registering a trailer: what do I need to consider? Tiltable car trailer GARDEN TRAILER 200 KIPP with additional drop sides, support wheel and flat cover Necessary documents and fast delivery If you want to buy a Garden Trailer 200 KIPP car trailer, you don't have to worry about the formalities. We will prepare all the necessary documents required for immediate registration, i.e. invoice, EC certificate of conformity, vehicle registration document, warranty book (2-year warranty) and our certificate. Further information can be found under the following link: from order to delivery. Payment is made in advance. The purchased car trailer will be sent within 24 hours with the complete set of documents for registration. Lrodpfxsuk E I Ej Abyeu Advantages of a Garden Trailer 200 KIPP car trailer If you decide to purchase our new car trailer, you will receive a 2-year warranty. Each product comes with a user manual and a warranty booklet. All the most important documents come with the purchased trailer. In addition, you can purchase accessories in the form of drop sides, support wheels or anti-theft protection at any time. If you have any questions or doubts while using the car trailer, you can contact our specialists at any time.

Condition: used, Year of construction: 2013, operating hours: 73,000 h, functionality: fully functional, power: 7,130 kW (9,694.09 HP), output frequency: 50 Hz, nominal power: 7,130 kW (9,694.09 HP), continuous power: 7,130 kW (9,694.09 HP), rotational speed (max.): 1,500 rpm, motor manufacturer: M+M Turbinen-Technik, Evaporation pressure: 21 bar Steam pressure: 4.3 bar Temperature: Inlet 365 °C / Outlet 165 °C Generator: 8300 kWel Operating hours (annually): 8760 h/year Transformers included: Siemens Type 4GU6043-9HY Total operating hours: 73,000 h M+M turbines are typically custom-made industrial steam turbines used for combined heat and power (CHP) or for energy recovery from process steam. Due to the moderate inlet pressure and the relatively high outlet pressure, this is a back pressure steam turbine. It was designed for process steam systems to ensure efficient energy recovery and heat supply. The turbine was used in a paper mill to increase efficiency. With an output of 7.2 MW, this turbine is considered a medium-sized system in industrial applications. Thanks to the pressure ratios and the use of the turbine's exhaust steam, very little energy is lost. The estimated steam flow rate is 30 to 40 t/h. This enabled the paper mill to achieve an efficiency of 60% to 75%. The efficiency in CHP operation was approximately 75% to 85%. The turbine was designed for operation for 8,760 hours (full load year) with a maximum steam flow rate of 114 t/h. The turbine-generator unit supplies the paper machine with electricity at the 6 kV level. The process steam required for production is provided in two pressure stages. Lrjdsz E Nh Njpfx Abyou As the steam flows through the turbine, the steam pressure is reduced from 20 bar to 4.2 bar. If the turbine needs to be shut down for any reason, the process steam supply is provided via four pressure reducing stations connected in parallel.

Condition: used, functionality: fully functional, machine/vehicle number: 2201, mileage: 593,930 km, power: 180 kW (244.73 HP), first registration: 06/2013, fuel type: diesel, empty load weight: 5,300 kg, overall weight: 11,990 kg, tire size: 265/70/19.5, tire condition: 50 %, axle configuration: 4x2, next inspection (TÜV): 09/2026, fuel: diesel, color: grey, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 6,200 mm, loading space width: 2,470 mm, Year of construction: 2013, Equipment: ABS, car registration, hill-start assist, low noise, non-smoking vehicle, onboard computer, power assisted steering, power mirror, tachograph, truck registration, Atego 1218, flatbed body, fully leaf-sprung suspension, manual transmission, ASR can be deactivated, German vehicle. Sale only to commercial businesses and with the exclusion of any warranty. Lrodpfx Aboz Dbmuoyou We deliver to any German seaport.

Condition: excellent (used), Year of construction: 2019, 357 USED Refrigerator, proofer, freezer USK Ungemann, Viesmann. IMPORTANT: Can be placed outdoors under cover. TECHNICAL DATA: - Operating temperature range: -30°C to +20°C EXTERNAL DIMENSIONS (in cm): - height 281, - width 506, - length 275. INTERNAL DIMENSIONS (in cm): - height 200, - width 452, Ledpeyw Iz Rofx Abyoru - length 234. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: new, M&S Gruseck GmbH NEW Screen Drums from the Market Leader – 100% MADE IN GERMANY! Screen drum suitable for a Doppstadt SM620 Square staggered perforation (QV) 80mm Sheet thickness = 10mm !!! Over 500 screen drums manufactured per year speak for themselves !!! - High-quality construction! - Always tested! True running in operation! - Best price-performance ratio Lodpfxsxnyyko Abyoru - Short delivery times! - Stamped perforations for perfect screening results! - Various perforations (square, round, honeycomb, etc.)! - Narrow bridges for optimal screening area! - Various sheet thicknesses available! - Different materials possible (min. S355)! - Special customer requirements are no problem for us – they are our specialty! - All drums are painted! - Large stock selection available! - Suitable for all common screening machines!

Condition: new, M&S Gruseck GmbH NEW screening drums from the market leader - 100% MADE IN GERMANY! Screening drum suitable for a Doppstadt SM718 Square offset perforation (RV) 80mm Sheet thickness = 10mm !!! More than 500 screening drums manufactured per year speak for themselves !!! - Premium quality! - Thoroughly tested! True running in operation! - Best price-performance ratio - Short delivery times! Lrsdexnyzuspfx Abyou - Precision-punched perforations for perfect screening results! - Various perforation types (square, round, honeycomb, etc.)! - Narrow webs for optimal screening surface! - Different sheet thicknesses! - Various materials available (min. S355)! - Special customer requirements are not a problem for us, but our speciality! - All drums are painted! - Large stock selection! - For all common screening machines!

Condition: used, Anvil with round horn and rectangular horn Northern German style anvil Face width: 130 mm Face length: 630 mm (with pointed horn) Round horn length: approx. 200 mm Pointed horn length: approx. 220 mm Overall length: 830 mm Height: 340 mm Foot with front anvil: 430 x 320 mm - Cast steel, hardened - Square hole approx. 28 mm for anvil tools - Round hole Ø approx. 23 mm Lodpey Ehycofx Abysru Dimensions L x W x H: 830 x 320 x 340 mm Very bright ring, good quality

Condition: new, functionality: fully functional, empty load weight: 890 kg, maximum load weight: 510 kg, overall weight: 1,400 kg, loading space length: 3,900 mm, loading space width: 1,880 mm, loading space height: 2,110 mm, PRODUCT INFORMATION "ANSSEMS PTS 1400 CONSTRUCTION TRAILER 390X188CM WITH STORAGE ROOM AND TOILET" Car trailer as a construction trailer from Anssems. This recreation trailer is suitable for all seasons. The insulated sandwich construction keeps out heat and cold. The electric heating provides additional support in winter. A crew trailer can be used on any construction site. Getting to the construction site is even easier with a car trailer like this, as it can be driven behind almost any car. It can also be used as an office trailer. Our construction trailers come standard with an entry door with a personal lock, a storage room with a door, a toilet with a separate room and door, fixed steps at the front and rear, a white sandwich construction, a round gray barrel roof, a 230V fuse box with residual current device, a switch, and an interior light, two windows with safety covers, four sturdy crank supports, a 230V power socket, a sturdy frame, and a galvanized V-drawbar. Accessories for construction trailers include a power cable, 100 km/h shock absorbers, and an anti-theft device. -Interior dimensions LxWxH: approx. 390x188x211cm (storage area 98x188x211cm / recreation room 292x188x211cm) ----- You can also get: · Financing · Leasing (businesses only) · Consulting · Delivery throughout Germany (except islands) · Accessories · Rental trailers · Spare parts · Registration service for DH – HB – DEL · Service · Repairs · TÜV inspection for car trailers Ahrens Car Trailer Center, Moordeicher Landstraße 37, 28816 Stuhr near Bremen Lrsdpfx Abewbquboysu Opening hours: Monday - Friday 8:00 a.m. - 5:00 p.m.

Condition: new, functionality: fully functional, empty load weight: 210 kg, maximum load weight: 540 kg, overall weight: 750 kg, Product information "Anssems PLT1 750 251x150 PRO High Loader" High loader from manufacturer ANSSEMS, model PLT1 750.251x150 Pro. As standard equipment, the unbraked, single-axle flatbed high loader from Anssems features aluminium side panels that can all be folded down and removed, robust eccentric locks, interior lashing rings, profile channels for accessory fitting or load securing, a steel frame, jockey wheel, and a V-drawbar. We also offer accessories for Anssems car trailers such as high tarpaulins, cover tarpaulins, net hooks, mesh sides, side panel extensions, rear support sets, boxes, straps, and locks. ----- With us, you can also receive: Lsdpfswu At Nox Abyoru • Financing • Leasing (commercial customers only) • Consulting • Delivery throughout Germany (except islands) • Accessories • Rental trailers • Spare parts • Registration service for DH – HB – DEL • Service • Repairs • TÜV inspection for car trailers PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Opening hours: Monday – Friday 8:00 am – 5:00 pm

Condition: used, functionality: fully functional, empty load weight: 9,000 kg, maximum load weight: 21,000 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 07/1995, loading space length: 13,700 mm, loading space width: 2,500 mm, suspension: air, tire size: 285.70 r 19.5, color: black, Year of construction: 1995, Equipment: ABS, tail-lift, sem racing set-up zorzi gooseneck, 2-axle pneumatic chassis, insulated load-bearing set-up with 10 q.li dhollandia racing rear side, double-level side storage, rounded head, internal part with workshop and 2-vehicle shelter with upper floor and aisles, living area with beds and sofas and bathroom on the neck, complete side awning included + removable mirrored walls, side access door with stairs and rear door, INTERDRIVE SRL-PARMA DEALER Lrodpev T Ugajfx Abyju

Condition: new, functionality: fully functional, empty load weight: 289 kg, maximum load weight: 1,011 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,545 mm, loading space width: 1,510 mm, loading space height: 400 mm, Year of construction: 2026, MARTZ High-Sider 250, 1.3T NEW VEHICLE Lsdpfx Aeww A Hbjbysru Internal dimensions: 254cm x 151cm Total weight: 1300 kg Payload: 1011 kg Braked single-axle high-sider 1300 kg KNOTT axle with inertia brake, reverse assist, and parking brake Bolted and galvanized steel frame Galvanized steel side panels, 40cm high 15mm thick, robust, and non-slip screen-printed plywood floor 13-pole electrical system Support wheel 13-inch M+S tires Numerous lashing points Front marker light Rear lights with reversing light and triangular reflectors 2x wedge-shaped chock Optional accessories: - 100 km/h upgrade - Rear supports - Replacement of steel side panels with aluminum side panels - Extension side panels, steel or aluminum - Integrated loading ramps, steel or aluminum - Grid structure - H-frame - Motorcycle support rail - Flat cover with or without bow - High cover - Coarse or fine mesh net - Spare wheel with holder Further accessories available upon request! Images are for illustrative purposes and may show accessories that incur an additional charge. Plus vehicle registration document and delivery to Gera, €150 net. Haven't found the right trailer yet? We have 50-100 vehicles in stock and ready for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repairs, including for caravan trailers. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website, or come by directly.

Condition: new, functionality: fully functional, empty load weight: 265 kg, maximum load weight: 1,035 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,950 mm, loading space width: 1,630 mm, Year of construction: 2026, MARTZ Unilader 300 C 1.3T NEW VEHICLE Internal dimensions: 295cm x 163cm Total weight: 1300 kg Ledpfx Abeww Eg Rjyjru Payload: 1035 kg Braked single-axle low-loader 1300 kg KNOTT axle with inertia brake, reversing assist, and handbrake Bolted and galvanized steel frame Drawbar, foldable With hydraulic support 15mm thick, robust, and non-slip screen-printed plywood floor 13-pole electrical system Plastic fenders Support wheel 13-inch M+S tires Numerous lashing points Front marker light Rear lamps with reversing light and triangular reflectors Foldable license plate holder 2x U-shaped chock Optional accessories: - 100 km/h upgrade - Rear supports - Steel side panels 40cm - Extension side panels - Grid superstructure - Drive-over rear door - Motorcycle support rail - Crank attachment to create a continuously adjustable tilting angle - Flat cover with or without bows - High cover - Mesh, coarse or fine - Spare wheel with holder Further accessories available upon request! Images are for illustrative purposes and may show optional accessories that are subject to an additional charge. Plus vehicle registration document and freight to Gera: €150 net Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravans. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website, or come directly to our location.

Condition: used, overall weight: 5,000 kg, axle configuration: 1 axle, first registration: 11/2005, loading space length: 6,200 mm, loading space width: 2,360 mm, loading space height: 2,190 mm, Equipment: ABS, tail-lift, Jännert Schierling car transporter with winch For inquiries: 0326239 * Condition: Very good * First registration: 08.11.2005 * Permissible total weight: 5.00 t * ABS * Air suspension * Fold-out access ramps * Aluminum profile floor * 2x roll-up door on the left * Winch * Mechanical loading ramp Dimensions (cargo area/loading platform): Lrjdoyvmm Nspfx Abysu internal length: 6,200 mm internal width: 2,360 mm internal height: 2,190 mm Tires: 205 / 65 R 17.5, air-sprung ---- Price: 5,900 EUR + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, French, Polish and Russian Typographical errors, errors and prior sale excepted.

Condition: used, mileage: 116,000 km, power: 96 kW (130.52 HP), first registration: 08/2018, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 7,150 mm, total width: 2,085 mm, total height: 2,170 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Errors and prior sale excepted! Internal number: 0406. JY07660 ----Different vehicle location: 04425 Taucha Gerichtsweg 4 Contact: Mr. Ralph Bergel Tel. or Email: ----EQUIPMENT - Air conditioning (front) - Special paint finish in standard color - 1 battery - 6-speed gearbox Lrodpfxsyw Dz He Abyju - Electronic ABS with EBD - Driver’s side airbag - Manually adjustable exterior mirrors - On-board computer - Flat roof - Front overhead storage compartment - Headliner in driver's cab - Rev counter - ESP with TSC - Electrically operated front windows - Ford Easy Fuel - Glove compartment with cover - Interior lighting with delayed shutoff - Adjustable steering column - Diesel particulate filter - Low beam headlights - Power steering - Seat belts - Seats: Seat Package 4 - Daytime running lights - Recirculation switch - Immobilizer - Heat-insulating glass, lightly tinted - Central locking with remote control ... and much more. ----The vehicle is in unprepared/uncleaned condition! Nationwide delivery available for an additional charge. Errors and prior sale excepted. We are happy to accept your vehicle as trade-in. Financing / leasing possible with no down payment! Do you have any further questions? We are happy to assist you!

Condition: used, maximum load weight: 2,094 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,000 mm, loading space width: 1,830 mm, loading space height: 350 mm, total width: 1,960 mm, total height: 1,020 mm, A12 GW26NG000301 High-bed tandem trailer, manufacturer STEMA, type SySTEMA SH .2, gross weight: 2,700 kg, High-loader with low frame, 4.01 m x 1.83 m, 10" tyres, 100 km/h approval Ljdpfx Abjym Igwsyjru Loading height: 600 mm Subject to errors and prior sale.

Condition: used, mileage: 464,667 km, first registration: 05/1982, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: yellow, driver cabin: day cab, gearing type: mechanical, suspension: steel, Year of construction: 1982, = Additional options and accessories = - PTO (Power Take-Off) = Further information = Suspension: leaf spring Front axle: steered Rear axle: twin wheels Unladen weight: 3,850 kg Payload: 4,150 kg Gross vehicle weight: 8,000 kg Max. number of passenger cars: 1 Pump: Yes Lrjdpsyxxvnofx Abysu Contact Thierry Leemans for further information.

Condition: used, Year of construction: 2011, operating hours: 21,763 h, functionality: fully functional, total length: 7,200 mm, total width: 2,950 mm, total height: 3,000 mm, overall weight: 12,400 kg, input voltage: 400 V, input frequency: 50 Hz, electrical fuse: 175 A, power: 105 kW (142.76 HP), A Pero V4 parts cleaning system is available. Basket dimensions X/Y/Z: 1250mm/850mm/500mm Control system: Siemens S7 Basket feeding: automatic, Operating hours: 21763h, batch counter: 54211. Ultrasound included. Lrodpju Ecfljfx Abyou Documentation available. On-site inspection is possible. Available from November 2024. Spare parts package included