Used Gastronomy Resolution for sale (1,186)

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of Manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average Power Output: 200 W – 5000 W Peak Power Output: Up to 6 kW Wavelength: 10.6 microns Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam Divergence: 1.5 mrad (half angle) Beam Diameter at Exit: 15 mm 1/e², 21 mm full beam Pulsed Operation – Pulse Repetition Rate: 0 – 2 kHz Pulse Duration: 250 microseconds, 70 µs resolution Alignment Stability: +/- 150 µrad Operating Conditions: • Ambient temperature (max.): 40°C • Ambient temperature (min.): 10°C • Relative humidity: < 95% (non-condensing) Diode Laser: • Wavelength: 635 nm • Output Power: < 1 mW ——— 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power requirement: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20°C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Dodpsywwrfsfx Ag Dsur Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total Consumption: 20 – 70 SLPH (variable) Additional Requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2°C • Depending on shutter utilization

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average power: 200 W – 5000 W Peak power: Up to 6 kW Wavelength: 10.6 micrometers Beam quality factor (M²): < 2.4 (typically 2.1 to 2.3) Beam divergence: 1.5 mrad (half-angle) Output beam diameter: 15 mm 1/e², 21 mm full beam Pulsed operation – pulse repetition rate: 0 – 2 kHz Pulse width: 250 microseconds, 70 µs resolution Alignment stability: +/- 150 µrad Operating conditions: • Ambient temperature (max): 40 °C Dsdpfx Ageywwq Uo Dsur • Ambient temperature (min): 10 °C • Relative humidity: < 95% (non-condensing) Diode laser: • Wavelength: 635 nm • Output power: < 1 mW — 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power consumption: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20 °C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total consumption: 20 – 70 SLPH (variable) Additional requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2 °C • Depending on shutter usage

Year of construction: 2017, condition: good (used), Product number: 0029160 Duedpfx Agsyvu Hks Dor Brand: Rational Model: CMP 101 Product category: Combi steamers Length: 1000 mm Width: 900 mm Height: 1700 mm Connection voltage (V): 400 Power (W): 18600

Condition: used, STAR SB-20R type N is a CNC automatic lathe (CNC Swiss type) engineered for high-precision work with superior accuracy and reliability. Capacities: max turning Ø 20 mm, max drilling Ø 10 mm, max threading Ø 8 M; total 5 axes, C-axis resolution 0.001°. Specs: spindle stepless 500–10000 t/min, rapid traverse 35 m/min, spindle motor 2.2/3.7 kW, total power 3.7 kVA, 50 Hz 3x 400 V, weight ≈1800 kg, dimensions L2070 × W1770 × H1760 mm. Accessories: C axis, workpiece conveyor, chip conveyor, coolant system, RS232 and USB interfaces. Achieves tight tolerances; ideal for automotive, watchmaking, machine tools, aerospace and medical sectors. Duodpsyxnztsfx Ag Djr

Condition: used, CITIZEN CINCOM R 07 VI is a high-precision CNC automatic lathe (Swiss-type) delivering strong accuracy and reliability. Capacities: 6 axes, 2 spindles; max turning Ø 7 mm, max length 40 mm, spindle bore 12 mm; threading up to Ø4 M, max tapping length 40 mm. Specs: spindle 0–16,000 rpm, 1.1 kW; back spindle up to 10,000 rpm, 0.5 kW; C-axis resolution 1°; supply 3x400 V 50 Hz, total power 4 kVA; weight ~950 kg; footprint 1465×560×1410 mm. Accessories: parts catcher, lamp, bar feeder LNS TRYTON 107, central lubrication, status light. Built to achieve tight tolerances; typical applications include automotive, watchmaking, medical, aerospace, and machine-tool components Dedpfxoyxnutj Ag Dour

Condition: excellent (used), Brand: Rational Model: VCC 211 Length: 1140 mm Width: 920 mm Dedpfeyvtp Rsx Ag Djur Height: 1110 mm Connection voltage (V): 400 Power (W): 22000

Condition: excellent (used), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, total length: 1,670 mm, total width: 820 mm, total height: 930 mm, overall weight: 600 kg, input voltage: 240 V, plate width: 60 mm, plate length: 80 mm, SAATI LTS 6080 CTS (Computer-to-Screen) system in very good condition. The machine is used for direct laser exposure of coated screens for screen printing. No wax system – true direct exposure. Ideal for textile screen printing companies with frequent motif changes and in-house screen production. Resolution up to 2540 dpi – direct laser exposure – suitable for all common CTS emulsions. Maximum screen size: 60x80cm. The machine can be inspected onsite and tested with your own screens. Transport of the machine can be arranged by agreement and special arrangement. Included in the price: - Computer including keyboard, monitor, and mouse. - Machine software with all configuration and adjustment options. Dodpfx Aoyx Hfwog Dsur - Accessories (maintenance aids). Price on request. Sale excludes any warranty and liability for material defects. Oliver Bartsch GmbH – Cologne, Germany For further questions, we are always at your disposal.

Condition: used, Epson's first linehead, inkjet label press with LED UV curing ink, the L-6034VW/L-6034V enables high-speed printing that's ideal for short-to mid-run jobs, producing labels with outstanding scratch and weather resistance.  Digital Label Press Epson SurePress L-6034 Baujahr / Year 2016 - Serial-No. TE90010012 Bildgröße / Image Size max. 330 x 1000mm Bahnbreite / Web Width 80 - 340mm Substrate Support PP, PE and PET, coated paper, cast coated paper, and uncoated paper Substrate Thickness 3.14 - 12.60 mils (80 to 320 microns) Printing Technology PrecisionCore linehead inkjet technology Quick-drying UV ink Epson UV Ink / LED-UV-härtender Tinte White Ink Circulation System Automated control and in-line inkjet nozzle testing CMYK, White, and Multi-varnish inks installed in-line Duedpjyx Ir Sofx Ag Der Maximum Print Resolution 600 x 600 dpi Print Speed Up to 49.21 ft/min (15m/min), Up to 24.61 ft/min (7.5m/min)  Ink Type LED UV Curing Inks Ink Configuration Black, Cyan, Magenta, Yellow, Multi-Varnish, White Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2010, Diebold Tool Presetter VEG 400 For measuring the lengths and radii of milling, turning, and boring tools - Easy to use - Robust design for use directly at the machine - Universally adjustable - Rotatable spindle made of stainless steel - Reference values for diameter and length on the spindle - Outstanding concentricity accuracy - Measurement accuracy less than 0.02 mm - Digital display with a resolution of 0.01 mm - Data output ports - Includes a shipping box for self-adhesive labels for tool marking - Lockable fine adjustment for precise positioning of measurement values - Adaptable to all taper sizes and cylindrical holders Technical data: - Dimensions (L x W x H): 350 x 175 x 730 mm - Measuring range: Length: 410 mm, Diameter: 240 mm - Weight: 22 kg - Color: Red RAL 3003 - Spindle run-out: less than 0.005 mm Dsdex Nq Htepfx Ag Djur - Measuring accuracy: less than 0.02 mm Top condition - from a school setting Location: available from stock 54634 Bitburg - Immediately available -

Condition: excellent (used), functionality: fully functional, grinding length: 600 mm, grinding width: 500 mm, total height: 1,840 mm, total length: 2,900 mm, total width: 1,840 mm, grinding height: 230 mm, table length: 600 mm, table load: 200 kg, table width: 200 mm, For sale is a DUE Grind surface grinding machine, brand Asyst, model A525 PNC 100. This machine has been completely overhauled from a Jung 525 surface grinder. A key feature of this machine is its ability to operate both conventionally as well as with CNC control. The machine is in very good, near-unused condition and is ready for immediate use. Technical Data: Year of manufacture: Table length: 600 mm Table width: 200 mm X-axis traverse (stroke): 600 mm Y-axis (grinding height): 500 mm Z-axis travel, end positions +/-: 230 mm Table speed X-axis: 0.3-25 m/min Magnetic chuck dimensions: 600x200 mm Optional 3-point dresser: 350x200 mm Max. workpiece weight (incl. magnet): 200 kg Working area: 400 mm Y-axis traverse speed: 0-1,000 mm/min Z-axis traverse speed: 0-1,000 mm/min Y-axis positioning accuracy: 0.001 mm Z-axis positioning accuracy: 0.001 mm Y-axis measuring system resolution: 0.0001 mm Grinding wheel dimensions: 250x30x51 mm Spindle speed: 100-3,800 rpm Djdpfx Agjyx D Ipj Deur Spindle motor power: 100-3,800 kW Automatic dressing with stationary diamond unit TA 3/5 Machine dimensions: 2,900x2,320x1,840 mm Weight: 2,300 kg Transport and loading can be organized Europe-wide at an additional cost if desired. Prices net plus VAT. Viewing is possible by appointment. Please contact us—our team looks forward to assisting you. Trade-in or exchange is possible! Machines Purchase / Sale BUYING & SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production, or would you like to sell your equipment? For more information or contact options, please visit our website.

Condition: good (used), For sale is a robust and reliable industrial washing machine, model IR 6002. This compact basket washing system is the perfect addition to any machinery fleet, whether in contract manufacturing at CNC milling centers or for tool maintenance in injection molding operations. The IR 6002 efficiently removes oils, emulsions, and chips from your workpieces, making them ready for immediate quality inspection or further processing. Height: 117.5 cm Width: 90 cm Dujdpfeyx Dwdsx Ag Djr Depth: 70 cm Depth with open door: 126.5 cm Power cable length: approx. 1.8 m Cold and hot water connection max. 70 °C DI water connection max. 70 °C Static water pressure: Cold, hot, and DI water connection max. 1000 kPa overpressure* Minimum flow pressure: Cold and hot water connection 150 kPa overpressure* DI water connection 60 kPa overpressure* Transport and loading can be organized throughout Europe upon request and for an additional charge. Prices are subject to VAT Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase & sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Gjbn N Ay Dowza Dxogoil Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: like new (used), Year of construction: 2016, operating hours: 31,881 h, grinding length: 3,350 mm, total width: 3,600 mm, total length: 9,400 mm, total height: 2,000 mm, grinding diameter: 595 mm, distance between centers: 3,000 mm, Year of manufacture: 2013 CNC Controller: FAGOR 8055TCO Capacity Distance between centers (mm): 3000 Height between centers (mm): 300 Height between centers from the ground (mm): 1200 Grinding diameter (mm): ø 595 Max. workpiece weight between centers (kg): 2000 Max. Workpiece weight with tool (kg): 200 Table (Z-axis) Maximum travel (mm): 3350 Rotating table plate ±5° Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Grinding carriage (X-axis) Maximum travel (mm): 500 Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Resolution (mm): 0.0005° Grinding head Left grinding wheel diameter (mm): 600 Peripheral speed (m/s): 45 Workpiece head Spindle speed (rpm): 9 ÷ 250 CM taper: 5 Spindle type: 8" Tailstock Type: Manual handwheel Spindle taper (cm): 6 Djdpfx Agoyudtps Deur Maximum spindle travel (mm): 60 Quill diameter (mm): 85 Maximum taper correction (mm): ±0.1 Equipment Tailstock diamond dresser with diamond holder Diamond Grinding wheel guards according to ISO, OSHA, and UNE standard +Two-door enclosure Paper feeder and magnetic separator Grinding wheel balancing shaft MARPOSS electrodynamic balancer Grinding wheel safety sensor Touch-type axial positioner with T25 probe Grinding wheel chuck Driving dog sets Basic machine dimensions / weight Length (mm): 9400 Width (mm): 3600 Height (mm): 2000 Weight (kg): 15000 Air or water through spindle center DXF import function Spindle 2, workpiece unloader Working time hours Under power: 31881 Spindle 1: 8860 Spindle 2: 9774 Rated power kVA: 61 Basic machine dimensions / weight Length mm: 4200 Width mm: 2600 Height mm: 2586 Weight kg: 15000

Condition: used, Digitale Etikettendruckmaschine SurePress mit Tintenstrahltechnologie / Digital Label Press with Inkjet Technology Duodsyx Ar Hepfx Ag Der Digitale Etikettendruckmaschine / Digital Label Press Epson Sure Press L-4033AW Baujahr / Year 2016 - Serial-No. RXH0000088 Maximale Druckauflösung / Maximum Print Resolution: Papier / Paper 720 x 720dpi Film 1440 x 720dpi Rollbedruckstoff Durchmesser max. 100mm Druckgeschwindigkeit / Print Speed: Bis zu 5 m (16') pro Minute bei 720 x 720 dpi (auf Papier) / Up to 16' (5m) per minute at 720 x 720 dpi (on paper) Die Epson SurePress L-4033AW ist eine industrielle Inkjet-Digitaletikettendruckmaschine, die speziell für den Etikettendruck in hoher Qualität konzipiert wurde.  Besonderheit, das weiße Tintenset (AW = Auto White) ermöglicht den Druck auf transparenten Filmen und metallischen Substraten. The Epson digital label press capitalizes on Epson's acclaimed MicroPiezo® ink jet technology to create output with smooth gradations and incredible color quality. The L-4033A has six-color (Cyan, Magenta, Yellow, Black, Orange and Green), industrial-quality, water-based ink set produces a remarkable range of colors for impressive, professional and consistent results.  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 2018, KONICA MINOLTA ACCURIOLABEL 190 Year of Manufacture: 2018 _____ Machine Specifications and Equipment:  Total Print Count: ONLY 0.4 million  Web width: 330 mm  Print Speed: Up to 60 ppm  Resolution: 1200 x 1200 dpi  Paper Formats: A6 - SRA3, custom sizes  Duplex Printing: Yes Dodeyz Ac Djpfx Ag Dour  Connectivity: USB, Ethernet  Toner System: Simitri HD polymerized toner  All spare parts replaced by KONICA MINOLTA GERMANY – like new.

Year of construction: 2024, condition: new, The DA-69T controller offers both 2D and 3D programming, which includes automatic calculation of the bending sequence and collision detection. The entire 3D machine setup includes multiple tool stations and provides immediate feedback on the feasibility and handling of the product. Delem-69T properties: - 3D and 2D graphic touch screen programming mode - 3D representation in simulation and production - 17-inch TFT colour display with high resolution - Complete Windows Application Suite - Compatible with Delem Modusys (module scalability and adaptivity) - USB, peripheral interface - Open system architecture - Bending and correction interface sensor - Profile-T3D offline software - great contribution to environmental protection, climate change and the greenhouse effect will thank us, the next generation will thank us too! AD-S 30175 with Y1, Y2, X and R axis Bending force: 175 tons bending length: 3050mm Passage between stands: 2600mm Rapid speed: 120 mm / sec working speed: 10mm / sec Speed of the return: 100 mm / sec Installation height of tool passage and the penetration depth of your press brake: 30mm table width: 104mm table height: 900mm stroke: 265 mm Projection: 410 mm Dodpfx Aed Tpadsg Dsur Support arms: 2 pcs. Stop finger: 2 pcs. Press force and speed of the press brake. X - axis: 500 mm / sec x-axis travel direction 650mm Speed R axis max.: 350 mm / sec R axis travel direction 250 mm Engine power: 18.5 kW Oil tank capacity: 250 litres length 42

Year of construction: 2024, condition: new, The DA-69T control offers both 2D and 3D programming, which includes automatic calculation of the bending sequence and collision detection. The entire 3D machine setup includes multiple tool stations and provides immediate feedback on product feasibility and handling. DA-69T features: - 3D- and 2D- graphical touch screen programming mode - 3D representation in simulation and production - 17-inch TFT colour display with high resolution - Complete Windows Application Suite - Compatible with Delem Modusys (module scalability and adaptivity) - USB, peripheral interface - Open system architecture - Sensor Bending and correction interface - Profile-T3D offline software - great contribution to environmental protection, climate change and the greenhouse effect will thank us, the next generation will thank us too! - Fully electronic drive - Up to 30% higher productivity - Up to 50% energy savings through Start-Stop technology - Faster than hydraulic press brake - Reduced operating costs - Much lower service and spare parts costs (the electric press brake is technically much simpler and almost maintenance-free) - No harmful oil - quiet - efficient - independent of Hyd. Oil - Low noise operation - relaxed and stress-free bending - Complete work area - Touchscreen operation Machine dimensions: ( L x W x H ): 2.150 mm x 1.650 mm x 2800 mm Technical details: bending length: 1.250mm Doded Sak Sopfx Ag Djur Free stand passage: 1.300 mm Press

Condition: used, mileage: 63,235 km, power: 105 kW (142.76 HP), first registration: 09/2019, fuel type: diesel, overall weight: 3,500 kg, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 6, total length: 6,156 mm, total width: 2,099 mm, total height: 2,443 mm, loading space length: 2,708 mm, Year of construction: 2019, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal Number: 1190. N067431 ----EQUIPMENT * Lockable AdBlue filler cap * Passenger-side airbag * 13-pin trailer socket * Electrically folding exterior mirrors * Battery: AGM battery 12 V / 92 Ah * Hill start assist * Diesel filler cap in red * Seat belt warning system for passenger seat * Main tank 93 liters * Terminal strip for electrical connections under driver’s seat base * Automatic climate control (Tempmatic) * Seats: Comfort driver’s seat * Radiator grille frame in body color * Ladder rack behind the cab * MBUX Multimedia System with 7-inch touchscreen High-resolution 7" touchscreen (960 x 540 pixels) AM/FM radio with dual tuner, Bluetooth connectivity with audio streaming and hands-free function, smartphone integration via Android Auto or Apple CarPlay, multimedia connection unit for linking portable devices via USB-C interface, 4 x 25 W output, sound adjustment, separate volume control for audio and phone, 2-way front speakers * Steering wheel: multifunction steering wheel * Cross member for trailer coupling, trailer load up to 2 t * Radio: Digital radio DAB * Rain sensor * Gear shift console optimized for passenger * Seats: lumbar support for driver’s seat * 230 V socket * Passenger compartment socket * Cruise control * Heat-insulating glass with band filter on front windshield * ADAPTIVE ESP (latest generation) with load- and speed-dependent dynamic driving control - Anti-lock Braking System (ABS) - Traction Control System (ASR) - Electronic Brakeforce Distribution (EBV) - Hydraulic Brake Assist (BAS) - Load Adaptive Control (LAC) - Roll Over Mitigation (ROM) - Roll Movement Intervention (RMI) - Enhanced Understeering Control (EUC) - Brake Disc Wiping (BDW) - Electronic Brake Prefill (EBP) - Easy Lane Change (ELC) * Overhead storage above windshield * Storage compartment under dashboard * Rear tow eye * Driver's airbag * Selectable all-wheel drive * Electrically adjustable and heated exterior mirrors, left and right * Outside temperature display * Adaptive brake lights * Diesel particulate filter and SCR * Tachometer * Headlight assistant * Electric window lifters for driver and passenger door * Transmission: 6-speed manual * Seat belt warning system for driver’s seat * Instrument panel and cluster with various storage options and optimized operating and display elements * KEYLESS-Start * Headrests (2), front * Paint: solid color * Steering wheel adjustable for tilt and height * Headlight range adjustment * Mercedes-Benz emergency call system, communication module (LTE) for digital services, breakdown management * Upholstery: fabric * Radio: radio prep (2 speakers) * Crosswind assist * Power steering * Seats: armrest passenger seat * Seats: armrest driver seat * Seats: adjustable passenger seat * Seats: adjustable driver seat * Daytime running lights * Immobilizer * Central locking system with remote control ... and much more. ----The vehicle is unrestored/unprepared! Nationwide delivery available at an extra charge. Errors and prior sale excepted. We are happy to accept your vehicle in part exchange. Financing / leasing also possible without down payment! Duedpfxjwwn S As Ag Dor Do you have any questions? We will be happy to advise you!

Condition: ready for operation (used), Year of construction: 2020, total height: 1,529 mm, total width: 776 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, overall weight: 324 kg, number of axes: 3, This 3-axis Mitutoyo QV-L404Z1L-D was manufactured in 2020. It features an X-axis travel of 400 mm, Y-axis travel of 400 mm, and Z-axis travel of 200 mm. The machine is equipped with advanced measurement capabilities, including video and touch probe measurement methods. If you are looking to get high-quality measurement capabilities, consider the Mitutoyo QV-L404Z1L-D CMM machine we have for sale. Contact us for further details. • Last calibration: 06 September 2022 • X-axis travel: 400 mm • Y-axis travel: 400 mm • Z-axis travel: 200 mm Dedpfx Agsyvqqfo Dour • Resolution: 0.1 µm (0.0001 mm) • Length measurement accuracy XY: (2 + 3L/1000) µm • Length measurement accuracy Z: (3 + 5L/1000) µm • Length measurement accuracy E2XY: (2.5 + 4L/1000) µm • Machine depth: 1303 mm • CNC control: Yes • Control software: QVPak V13.3 • Operating system: Windows 10 64-bit • Measurement display: 3D graphical measurement display • Programming interface: EasyEditor • Edge detection: Advanced recognition algorithms • Camera type: High-resolution CMOS color camera • Communication: USB 3.0 • Zoom system: 7-step zoom lens • Measurement methods: Video measurement; Touch probe measurement; Multi-sensor measurement; Automatic measurement sequences • Measurement capability: Micro and nano feature measurement Additional equipment • Touch probe type: TP20 • Probe modules: 2 standard force modules • Probe module type: TP20 standard force • Stylus holder: 5-way holder • Stylus length: 13 mm • Stylus diameter: 10 mm • Probe changer: MCR20 • Probe changer capacity: 3 ports • Calibration ring: Ø20 mm • Reference sphere: Ceramic master ball Ø15 mm • Machine stand: QVST-4L • Power cable: CH type 1.8 m • Computer type: Dell Precision workstation • Processor: Intel Xeon W-2223 3.6 GHz • Monitors: 2× Dell UltraSharp U2421E • Additional software: QV Partner Manager V3.1 • Statistical software: MeasLink Real-Time Professional V9

Condition: used, In this offer you are purchasing a used smartboard ‘SMART Board GX086’ Object of sale: 1 x SMART Board GX086 with the following specification: With 20 interaction points, teachers and students can easily interact Award-winning desktop software to create engaging learning experiences Easy integration of student devices No computer required Diagonal: 86 inches (218 cm) Max. brightness: 400 cd/m² Native resolution: 3840 x 2160 4K UHD Response time: 8 ms Aspect ratio: 16:9 Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing) may show. The device has been tested for function Packaging and dispatch: Djdpsvca Ibsfx Ag Deur You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: excellent (used), Year of construction: 2017, operating hours: 8,500 h, functionality: fully functional, Available from Q2 / 2026, equipment can still be configured as needed. Dsdsyzqwcepfx Ag Deur Universal 5-axis retrofit grinding machine direct from the manufacturer Current Horizon grinding software tailored to the requirements of your tools and components Working area: X-axis 630 mm Y-axis 345 mm Z-axis 430 mm C-axis swivel range 300° X3 auxiliary axis: Working area 400 mm Grinding spindle: HSK 80 E interface Continuous power 28.8 kW Standard speed 12,000 rpm Measuring system and feed: Linear axis resolution 0.0001 mm Linear axis rapid traverse 30,000 mm/min Rotary axis resolution 0.001° C-axis speed 150 rpm Rotary axis: (A-axis SK50) Standard center height 175 mm Spindle speed 1,000 rpm Optionally 2,600 rpm Control system: Siemens 840 DSL Tool changer: Simple wheel Coolant system: Turbo Separator Extraction: LTA Extinguishing system: Kraft & Bauer Dressing unit on request Further accessories and clamping devices available from the extensive A.Haas clamping device catalog. Customized, client-specific training Including pre-acceptance at the manufacturer’s facility, commissioning, training, and final acceptance at the customer site. Financing available upon request.

Condition: used, functionality: fully functional, This Rational Ultra Vent hood for Rational combi steamers, including connection kit, fits combi steamers CM, SCC 61/101 electric models from 2004 up to production year 2011. The hood has been inspected in our in-house workshop and is fully functional. This item is subject to the special regulation for used equipment: differential taxation according to §25a UStG, therefore no VAT can be shown on the invoice. Service: We are happy to assist in arranging contact with a certified Rational customer service provider throughout Germany. Are you looking for a particular Rational appliance type? Feel free to ask us—we have access to a comprehensive range of used and new items. We are happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our used equipment service for you: - 6 months warranty on all electrical parts, limited to the replacement of defective parts, excluding removal and installation costs - Professional refurbishment / inspection & thorough cleaning - Tested & fully functional – or your money back - Flexible shipping or self-collection options - Competent advice – before and after purchase - Provision of operating manuals, connection diagrams & spare parts - DGUV V3 electrical safety inspection This Ultra Vent hood features patented condensation technology, which binds and channels away steam and vapors. Elaborate exhaust installation measures are no longer necessary. No external vent connection required. Simple installation – even retrofittable. Technical specifications: W x D x H: approx. 854 x 1226 x 470 mm Power supply: V: 230 / Hz: 50-60 Dedpfeyvq D Sjx Ag Dsur Weight: approx. 55 kg Serial number: 661020704-07910 Type: 60.70.366 Condition: used, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors.

Year of construction: 2020, condition: new, functionality: fully functional, This listing concerns a combi steamer by the manufacturer Eloma, model Joker B6-23, built in 11/2020. The unit is new and unused, but no longer in its original packaging. The unit has been inspected in our in-house workshop and is fully functional. The base cabinet shown in the images is not included in the offer. You will receive an invoice with VAT shown separately. Duodoyvqhkopfx Ag Djr Ideal for outdoor kitchens, mobile kitchens, food trucks, catering services, or snack bars. Features fixed water connection. Our used equipment service for you: - 6 months warranty on electrical components, limited to replacement of defective parts, excluding installation and removal costs - High-quality brand-name equipment at fair prices - Professional refurbishment/inspection & expert cleaning - Tested & fully functional – or your money back - Flexible shipping or collection options - Competent advice – before and after your purchase - Provision of user manuals, wiring diagrams & spare parts - DGUV V3 safety inspection Technical data: W x D x H: approx. 515 x 630 x 830 mm Power supply: V: 400 / kW: 5.90 / Hz: 50/60 Capacity: 6 x 2/3 GN Weight: approx. 70 kg Serial number: ELN146772 Year of manufacture: 11/2020 Model: EL0509423 Condition: New, unused, not in original packaging. Further specifications: - Classic controls with three rotary encoders - Digital display for time, cooking chamber and core temperature - Multi-function button for custom or special cooking programs - Integrated hose spray with automatic retraction - Readout and logging of all HACCP-relevant data - Optional fully automatic autoclean cleaning system - Fresh steam system - Preheating and rapid cooling - Auto-reverse fan wheel - Timer function – start time preselection - Integrated core temperature probe Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to change and errors. Do you have questions, need advice, or would like to inspect the item onsite? You can reach us by phone during our business hours: Monday to Friday, 9:00 – 13:00 and 14:00 – 17:00. Sale is exclusively in accordance with our general terms and conditions (GTC).

Condition: good (used), Year of construction: 2024, Year of manufacture: 2024 3D AOI inspection system with intelligent DLP projection 1 x AOI database structure Web Apache server 1 x teaching station (offline programming) 1 x verification station (verification or repair station) 1 x Q-up (analysis station) 1 x administrative interface for AOI management PCB thickness: 0.4-4 mm PCB weight: up to 4 kg PCB warp: +/- 10 mm Compressed air: 0.3x0.6 Mpyi, 10 l/min Lighting: RGB color high-light method 2D camera and 3D measurement Resolution: telecentric lens with 15µ + 4 side cameras with 10µ each Height measurement up to 25 mm Dsdpsyw Nxwofx Ag Dsur PCB size: 50x50 – 510x460 mm Component clearance: top 40 mm, bottom 40 mm

Condition: good (used), Year of construction: 2005, functionality: fully functional, measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 405 mm, workpiece weight (max.): 180 kg, total height: 2,200 mm, total width: 1,100 mm, total length: 1,100 mm, travel distance X-axis: 505 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 405 mm, overall weight: 520 kg, input voltage: 230 V, operating temperature: 1,626 °C, pressure: 4 bar, Very nice and visually appealing 3D CNC measuring machine at a very attractive price. Three-dimensional measuring within three microns! Fully meets its specifications. Inspection and demonstration are possible. Measuring range: X-axis 505 mm Y-axis 405 mm Z-axis 405 mm Specification ISO 10360-2 MPEE = [2.9 + 3.0L/1000] µm (at a temperature of 16 ... 26 °C). Resolution 0.0001 mm Dsdeywd Elopfx Ag Dour CNC speed 520 mm/sec Maximum acceleration 0.23 g Can be loaded with workpieces up to 180 kg Height 220 cm Width 110 cm Length 115 cm Air-bearing axes (5 Bar supply) Operates on 230 Volt to controller (CMM itself is low-voltage) Includes PC, monitor, mouse/keyboard Software MCOSMOS-1 v3.0 (upgrade possible)

Condition: like new (used), Year of construction: 2021, operating hours: 500 h, 1050 including holder for 2 heads The Thermo-Inkjet 1050 was designed as a low-maintenance, easy-to-use industrial printer and produces high-resolution text, logos and graphics as well as 100% error-free readable barcodes. Dusdperz N Imsfx Ag Djr