Used Gas for sale (3,697)

Year of construction: 1988, condition: used, weight max. in kg 6000 kg fork length 1900 mm 89% serial number GEF 2240 height of stroke 3300 mm Tedpfx Asrxxbtshusf weight of the machine ca. 9650 t

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 48 h, load capacity: 3,500 kg, lifting height: 4,500 mm, free lift: 1,435 mm, fuel type: gas, mast type: triplex, construction height: 2,265 mm, power: 35 kW (47.59 HP), fork length: 1,200 mm, empty load weight: 4,610 kg, total length: 2,715 mm, drive type: Treibgas, construction width: 1,150 mm, LPG forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: torque converter Speed class: 20 Technical condition: New Front tires Type: Superelastic Front tires Size: SE 28-9-15 12 Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Size: 6.50-10 10 Rear tires Condition: 80 - 100% Description: The MI 35 G is an industrial forklift that can be used both indoors and outdoors and can carry loads of up to 3.5 tons. It is equipped with a Nissan LPG engine and has a wide range of masts and tires to suit all requirements. The clear and spacious operator's platform provides a comfortable and safe working environment. This forklift truck is easily accessible from two sides. Its ergonomic controls have been designed to make the driver's daily work easier. Optimum visibility thanks to the open roof, the large distance between the masts and the rear profile supports provides additional safety. Todpfx Ahetqwr Ieuof Sideshift, 3rd valve, CE certificate,

Condition: new, Year of construction: 2025, Powder baking furnace 3,500 x 1,900 x 2,000 mm 1 Inner dimension length 3,500 mm Tsdpfefhv Tcox Ahujf 2 Inner dimension width 1,900 mm 3 Inner dimension height 2.000 mm 4 Substructure 1 set of steel profiles 5 Walls 1 set of double-sided galvanized sheets 1mm, outside RAL 6 Insulation walls, ceiling 1 set rock wool 150mm 75Kg/m² 7 Floor furnace receives 2 drive-in rails for trolleys 8 Temperature 220°C 9 Fans 1 pc. 7.500 m³/hour 10 Electric motors 1 pc. 3 kW , 1450 U/m, 3 F, 50 Hz 11 Thermal power 58 kW 12 Hinged doors one-sided 2 pcs. insulated with rock wool 150mm 75Kg/m² Heating indirectly by thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heating electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burner 1 pc. furnace is heated electrically 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide

Condition: used, functionality: fully functional, 2-burner gas stove from warehouse clearance. Todpfx Ahjxz Tt Djuef Can be shipped by freight forwarder.

Year of construction: 2023, operating hours: 656 h, condition: used, functionality: fully functional, machine/vehicle number: G21SJ23083079345, The iCombiPro is the latest combi-steamer from RATIONAL. The iCombiPro 20.1/1 Gas model with 20 GN 1/1 tray slots is easy to operate, even for untrained staff, as it delivers outstanding food quality with minimal supervision. The ultra-fast intermediate and self-cleaning cycles keep your unit spotless. The appliance has been inspected in our in-house specialist workshop and is fully operational. You will receive an invoice with VAT shown separately. Service: We are happy to arrange certified Rational customer service for you throughout Germany. Are you looking for a specific Rational model? Ask us – we have access to an extensive range of used and new equipment. We are happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. Our equipment service for you: 6 months warranty on all electrical components Tsdsxtm D Hepfx Ahusf Top branded equipment at fair prices Professional and competent advice – before and after purchase Flexible choice of shipping or collection Provision of user manuals, circuit diagrams & spare parts Full range of accessories at attractive prices The iCombi Pro from Rational sets new standards for intelligence, efficiency, and flexibility. Condition: Used, tested, and fully functional Technical data: W x D x H: 877 x 913 x 1872 mm Minimum door opening for transport W x H: 900 x 1900 mm Serial number: G21SJ23083079345 Year of manufacture: 2023 Max. loading capacity per tray: 5 kg Max. total loading capacity: 100 kg Gas unit weight: 273 kg Electrical connection requirements: Voltage: 1 NAC 230 V Gas connection rating: 42 kW Fuse: 16 A Water connection requirements: Water inlet (pressure hose): 3/4 inch Water drain: DN 50 Additional features: Temperature range: 30°C to 300°C Detects real-time cooking chamber conditions Recognizes product size, load, and condition to calculate browning Learns frequently used cooking habits and applies them Determines the ideal cooking path to the desired result MyDisplay – customizable, user-specific control panel TFT color display and touchscreen Application and operation manual accessible on the device display Core temperature probe with automatic error correction on misplacement and positioning aid Glazed compartment door for energy saving LED interior lighting Includes energy consumption display Humidity regulation: precise, percentage-based measurement and adjustment Individual programming of at least 350 cooking programs with up to 12 steps each Steam injection adjustable in 3 levels USB interface High-performance fresh steam generator with automatic descaling 5 programmable fan speeds Shipping: Delivery or self-collection by arrangement Worldwide shipping available on request Shipping to islands or mountain locations only by prior arrangement

Condition: used, mileage: 552,910 km, power: 338 kW (459.55 HP), first registration: 01/2020, fuel type: gas, empty load weight: 8,168 kg, maximum load weight: 9,832 kg, overall weight: 18,000 kg, tire size: 315/70 22,5, tire condition: 30 %, axle configuration: 4x2, wheelbase: 3,800 mm, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of beds: 1, Year of construction: 2020, operating hours: 552,910 h, front tire size: 315/70 22,5, rear tire size: 315/70 22,5, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, electronic stability program (ESP), fog lights, onboard computer, parking heater, spoiler, truck registration, Reference number for inquiries: 2305 Iveco Stralis * Year of manufacture: 2020 * ABS (anti-lock braking system) * EBS (electronic brake system) * ESP (electronic stability program) * Power windows * Sleeper cab * Automatic climate control * Refrigerator compartment * Air suspension * Retarder / ZF Intarder * Sleeper berth * Heated seats * Auxiliary heater * Stationary air conditioning * Cruise control * On-board computer * Differential lock * Long-haul > 7.5 t * Digital tachograph * Lane keep assist * OBU preparation * Refrigerator * Electric windows and mirrors * Roof spoiler Todpfx Ajwrmfwehuof * Fog lights * Comfort air suspension seat * Multifunction steering wheel * Sun visor * Transmission: automatic * Suspension: air / air * Gross vehicle weight: 18,000 kg * Curb weight: 8,168 kg * Payload: 9,832 kg * Permitted gross vehicle weight: 18,000 kg * Tire condition front axle: 40% -- 30% - Tire size: 315/70 R22.5 * Tire condition rear axle: 30%|30% -- 30%|30% - Tire size: 315/70 R22.5 * Wheelbase: 3,800 mm * Tire sizes: 315/70 R22.5 * Blind spot camera * 2x LNG tanks Disclaimer: Subject to changes, prior sale, and errors. You can find more images and videos on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Handling of all (export) documents * Ordering of export / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Ask our trained specialist staff; we will be happy to advise you.

Condition: used, Year of construction: 2008, fuel type: gas, weight max. in kg 5.500 kg Number of working hours 2739 h weight of the machine ca. 8,59 t Tjdpfx Aheww Ngnjusf

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 180 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,460 mm, fuel type: gas, mast type: triplex, construction height: 2,215 mm, power: 43 kW (58.46 HP), fork length: 1,150 mm, empty load weight: 4,490 kg, total length: 2,715 mm, drive type: Treibgas, construction width: 1,225 mm, LPG forklift Load center of gravity: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: torque converter Tjdpfx Aswhr Rkohuef Speed class: 20 Condition: New machine Technical condition: New Front tires type: Superelastic Front tires Size: SE 28-9-15 Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Size: SE 6.50 10 Rear tires Condition: 80 - 100% Description: Simplicity, comfort, reliability and productivity. The MI 30 is a front and mast forklift truck with an internal combustion engine that has a lifting capacity of 3 tons and is aimed at professional users in the logistics and distribution sectors, among others. Extremely robust thanks to a rigorous choice of components and a simplified design, the machine is easy to maintain and will become a permanent part of your fleet. To ensure operator comfort and safety, access to the operator's platform has been simplified: grab handle, non-slip footboard, access from both sides... The view to the outside is optimal thanks to the rear profile supports, a large distance between the mast supports and the open roof. Sideshift, 3rd valve, rear work lights, front work lights, roof cover,

Condition: new, Year of construction: 2025, functionality: fully functional, temperature: 220 °C, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, Powder ovens in various sizes 1 Internal dimensions length 1500 - 6,500 [mm] 2 Internal dimensions width 1700 - 1,900 [mm] 3 Internal dimension height 2,000 [mm] 4 Substructure Steel profile 5 Walls 1 mm galvanized sheet metal on both sides, RAL on the outside Todpfxsfhv Tlj Ahuef 6 Insulation walls, ceiling rock wool 150mm 75Kg/m² 7 Oven floor receives 2 entry rails for rack trolleys (optionally with conveyor technology) 8 Temperature 220°C 9 Fans 1 - 2 pcs. 2600 - 15,000 [m³/h] 10 Electric motors 1 - 2 pcs. 1.1 - 6 [kW] , 1450 [rpm], 3 F, 50 [Hz] 11 Thermal output 14 - 99 [kW] 12 Sash or sliding doors on one or both sides 2 - 4 insulated with rock wool 150mm 75Kg/m² Indirect heating via thermoblock 13 Thermoblock stainless steel INOX AISI 316 Heating electric or gas heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection

Condition: new, Year of construction: 2018, functionality: fully functional, High-performance gas-powered tool for concrete, steel, and solid masonry fixings Driving energy: 105 J Rated voltage: 6 V/DC Todpexx Dffefx Ahuef Battery capacity: 1.5 Ah Number of fixings per battery charge: 3,000 pcs Magazine capacity: 40 pcs Length: 435 mm Width: 124 mm Height: 365 mm Machine weight with battery: 3.7 kg Scope of delivery: 1x new/unused device Numerous collated nails and gas cartridges A used machine in very good condition is also available separately. Surcharge: 250 EUR

Condition: good (used), Lot combined duoburners, gas and oil operated Fabr.: Steinmüller, Type 1: G-18-K 1120/800, Type 2: DAG-18-K 1120/800, Year of manufacture: 1996, burner data natural gas burner: heat output GT operation 43.6 MW, calorific value 40.09 MJ/kg, fuel mass flow 1.089 kg/s, control range 1:8, pmax.: approx. 1.500 Pa, exhaust gas temperature 424 degrees, (8 pieces), burner data for dual oil burners: calorific value 42MJ/kg, fuel oil throughput 4,600 kg/h, max. pressure before burner 13 bar, burner operating range 1:5, max. oil pressure at takeover 18 bar, temperature before burner 240 degrees, (8 pieces), Remark: Burner must be dismantled by customer. The burners can also be purchased separately. Tsdpfsd S R Insx Ahujf

Condition: used, functionality: fully functional, Year of construction: 1996, load capacity: 13,000 kg, lifting height: 7,900 mm, fuel type: gas, Manufacturer: Hyster Year of manufacture: 1996 Model: H16.00XLZ Operating hours: 9,100 h Lift height approx.: 7,900 mm Overall height approx.: 4,200 mm Realistic load capacity: 10,000 – 13,000 kg Mast: Triplex Drive: LPG Fork length: 2,400 mm Tyres: Pneumatic Free lift: full mm Engine make: GM Load center: 600 mm Carriage width: 3,000 mm Carriage DIN/FEM: Pin type Transmission: Torque converter Additional hydraulics: 3rd, 4th, and 5th control valve Attachments: Fork positioner, sideshift, individual fork adjustment Weight: 22,615 kg Vehicle length: approx. 7,400 mm incl. forks Vehicle width: 3,000 mm Additional equipment: work lights front, heater, full cab, general lighting, rotating beacon NOTE: The forklift originally comes from the timber trade and has a modified mast. This modification results in a lift height of 7,910 mm, but also reduces the maximum load capacity from 16 t to approx. 13.5 t due to the heavier mast. Load capacity according to data plate: 13,500 kg at 600 mm load center y 10,000 kg at 1,140 mm load center 9,700 kg at 1,200 mm load center 9,060 kg at 1,350 mm load center Used machine, no exchange, no warranty, no returns. Todpfsxp H Dfsx Ahusf VAT deductible.

Condition: used, Year of construction: 2002, fuel type: gas, Number of working hours 3184 h Tjdpfswx R T Ejx Ahujf weight max. 8 t weight of the machine ca. 13400 kg

Condition: good (used), functionality: fully functional, Gas burner 1 flg. for town gas Heide burner AKO 70 Stainless steel version Tsdot Sp I Espfx Ahusf Table-top appliance Nominal heat load 3.8 kW Appliance is cleaned Dimensions: 410 x 410 x 200 mm, WxDxH Used appliance cleaned More appliances in stock!

Condition: used, (2) Unused cryogenic nitrogen gas generating air separation units with capacity 200 mTPD combined. Each system was designed to produce a flow rate of 3,334 Nm3/hour (100 mTPD) at 115 PSIG and 0 degrees Celsius. The nitrogen produced is of the highest purity, meeting industry standards as follows: - Oxygen (O2): maximum 3 ppm v/v - Moisture (H20): maximum 3 ppm v/v - Total hydrocarbons (THC): Maximum 1 ppm Tsdpjw U A Irjfx Ahusf - Carbon dioxide (CO2): Maximum 0.5 ppm v/v - Carbon monoxide (CO): Less than 1.5 ppm v/v (when incoming air CO

Condition: good (used), Offcar 6-Burner Gas Range Wenied cast iron burners with double-ring burner caps and stabilized flames (3 x 4.5 kW, 3 x 7 kW) Tsdpfsxuqxdox Ahusf Valve with pilot flame for gas burner ignition GN 2/1 electric oven, heated by independent heating elements, thermostat-controlled, temperature range 50° to 300°C Electronic battery-powered pilot ignition The oven is heated by an electric heating element controlled by a thermostat, with a temperature range of 30° to 90°C. The control panel can be quickly removed for easy cleaning and maintenance. Adjustable feet made of AISI 304 stainless steel Dimensions (W x D x H): 1200 x 730 x 900 mm Weight: 186 kg Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Tank gas truck cryogenic used for oxygen, nitrogen, argon, LIN, LOX, LAR Truck BDF/ADR MAN year 2018 Tjdpfx Ahjxu D Sqouef 410.000 km Tara 8913 kg Generator Tank container AGA 11 m3 3 bar Tara ca 5000 kg High pressure Sefco pump Flow-metter + printer New vacuum test New tank test New technical inspection New ADR We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane. We will be glad to answer your questions via Phone and E-mail

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 421 h, load capacity: 6,000 kg, lifting height: 3,340 mm, fuel type: gas, Manufacturer: Yale Year of manufacture: 2012 Type: GLP60VX Serial number: D878E01527K Operating hours: 421.00 as of 04/09/2025 Lift height approx.: 3340 mm Overall height approx.: 2740 mm Load capacity: 6000 kg Mast: Simplex Drive: LPG Forks: 150mm x 1200mm Tyres: 2x super-elastic twin, 2x radial Free lift: 100 mm Engine make: GM 4.3 L 75KW Load center: 500 mm Fork carriage width: 150 mm Transmission: Torque converter Additional hydraulics: 3-way Attachment: Sideshift Weight: 9210 kg Tjdpoxp Hy Hofx Ahuof Vehicle length: 4784 mm Vehicle width: 2082 mm Additional equipment: Fork extension 1800mm Used vehicle, no exchange, no warranty, no returns. VAT deductible.

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: 19207555, This listing is for a tilting bratt pan from the premium manufacturer MKN, model Optima 850 Gas 3/1 GN, featuring motorized tilting. The unit has undergone a comprehensive inspection in our in-house workshop and is fully functional, with a 6-month warranty on all electrical components. The tilting bratt pan is in good used condition, free of defects, and is supplied mounted on legs. If required, the legs can be removed so the unit can be installed on a plinth. The manufacturer's RRP is €29,140 net. Our price: €8,394.95 net (€9,990 gross) Our used equipment service includes: 6-month warranty on all electrical components High-quality branded equipment at fair prices Professional refurbishment, inspection & expert cleaning Tested and fully functional – or your money back Flexible shipping or self-collection options Expert advice before and after purchase Provision of operating manuals, wiring diagrams, & spare parts Safety inspection according to DGUV V3 Technical data: Dimensions (W x D x H): approx. 1600 x 850 x 700 mm Pan internal dimensions: 1020 x 540 x 210 mm deep Power supply: V: 220-240 / kW: 17 Model: 10019153 Serial number: 19207555 Tjdpfx Asxq D S Njhuof Year of manufacture: 2019 Rated capacity / usable capacity: 116 / 94 liters Condition: Used, fully inspected, fully functional Additional information: Optimized rated capacity: 116 liters Usable capacity: 94 liters The front pivot point of the pan and the shape of the pouring spout prevent spillage and ensure complete emptying 55 mm cleaning gap between pan and side frame Supplied as standard with double-walled hinged cover and mixing tap Pan bottom made from special sandwich material as standard for even heat distribution Thermostatic temperature control Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement

Condition: used, This listing is for the ATi Portsens111 Gas Leak Detector The unit is in full working condition and is ready for immediate use The ATI PortaSens III is a portable, handheld gas leak detector designed for locating and measuring gas leaks across a wide range of environments—from chemical plants to pharmaceutical labs, food processing facilities, and confined spaces Key Features & Capabilities Interchangeable Smart Sensors Attaches a variety of pre‑calibrated smart sensor modules, each combining sensor, amplifier, and memory into one. These allow detection of 30 to over 60 different gases, depending on configuration Swapping sensors takes under a minute and requires no user calibration Built-in Sampling Pump & Flexible Wand Enables pinpoint detection of leak sources via one‑hand operation Color Touch-Screen Display Tjdpfx Ahjxhfqbsuof Features a backlit, graphic or touch-enabled LCD for easy reading in all lighting conditions Data Logging & Connectivity Includes a 4 GB internal data-logger, capturing millions of data points. Log intervals are programmable from 1 to 60 minutes, with USB connectivity for data transfer Power Options Runs on either rechargeable NiMH “D” cell battery or traditional alkaline D-cell batteries Alarms & Alerts Offers both visual and audible alarms—including low flow and low battery warnings—plus multiple gas concentration thresholds Supported Gases The D16 PortaSens III can detect a broad spectrum of gases, including but not limited to: Toxic gases: Hydrogen sulfide (H₂S), hydrogen peroxide (H₂O₂), formaldehyde, chlorine, sulfur dioxide, ammonia, and others Common industrial gases: Oxygen (O₂), ozone (O₃), carbon monoxide, carbon dioxide Specialty/exotic gases: Arsine (AsH₃), diborane, ethylene oxide, phosphine, silane, bromine, iodine, and more

Year of construction: 2016, condition: new, Gas-fired recirculation chamber furnace max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm Tsdpfx Ahscmr D Houof control zones: 2 burners power: 4 x 90 kW fans power: 2 x 4 kW

Condition: used, functionality: fully functional, Year of construction: 1993, load capacity: 3,500 kg, lifting height: 3,300 mm, Manufacturer: Clark Year of manufacture: 1993 Model: GPX35LPG ID No.: - Serial Number: GPX710-0084-GEF 9205 Operating hours: 5,962 (as of 15.09.2025) Lift height approx.: 3,300 mm Tjdpfoxp Hymjx Ahuof Overall height approx.: 2,300 mm Load capacity: 3,500 kg Mast: single stage Drive: LPG Forks: 120x50x1200 mm Tyres: 4x super elastic Free lift: 105 mm Engine type: Perkins Load centre: 500 mm Fork carriage width: 1,260 mm Transmission: torque converter Additional hydraulics: 3rd control valve Attachment: side shifter Weight: 5,690 kg Vehicle length: 2,900 mm Vehicle width: 1,350 mm Additional equipment: fork extension 1,750 mm Used vehicle, no exchange, no warranty, no return. VAT deductible.

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: 19207554, This listing is for a tilting bratt pan by the premium manufacturer MKN, model Optima 850 Gas 3/1 GN with motorized tilting. The unit has undergone a comprehensive inspection in our in-house workshop and is fully functional. The bratt pan is in good used condition, free from defects, and currently mounted on legs. If needed, the legs can be removed to allow installation on a plinth. The manufacturer’s RRP is €29,140 net. Our used-equipment service for you: • 6-month warranty on all electrical components • High-quality branded equipment at fair prices • Professional refurbishment, inspection, and expert cleaning • Tested & fully functional – or your money back • Flexible shipping or collect in person • Expert advice before and after your purchase • Operating manuals, wiring diagrams, and spare parts available • Inspection and approval according to DGUV V3 Technical data: • W x D x H: approx. 1600 x 850 x 700 mm • Pan internal dimensions: 1020 x 540 x 210 mm deep • Electrical connection: V: 220-240 / kW: 17 • Type: 10019153 • Serial No.: 19207554 • Year of manufacture: 2019 • Gross/net capacity: 116 / 94 liters Condition: Used, fully inspected, fully functional Further information: • Optimized gross capacity: 116 liters • Usable capacity: 94 liters • The forward pivot point and the shape of the pouring opening prevent spillage and guarantee complete emptying • 55 mm cleaning gap between pan and side frame • Supplied as standard with double-walled hinged lid and mixing valve • Pan bottom made from special sandwich material for even heat distribution • Thermostatic temperature control Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by special arrangement Tsdpfx Asw Nfiuohuef If you have any questions, require advice, or would like to view the unit on-site, please contact us during our business hours: Monday to Friday from 09:00 to 13:00 and 14:00 to 17:00. Sale is exclusively subject to our General Terms and Conditions (T&Cs).

Condition: used, This listing is for the Magellan Tandem Gas Analyser The unit is in full working condition and is ready for immediate use Here’s a summary of the Magellan / H.E.L Tandem Gas Analyser (especially the Tandem PRO model), based on available specs and user info. If you want comparison with similar units, or more in‑depth performance data, I can also pull that together. Todpfoxhdufex Ahusf The Tandem (Standard) and Tandem PRO gas analysers are instruments by Magellan Instruments / H.E.L designed primarily for monitoring O₂ (oxygen) and CO₂ (carbon dioxide) in gas streams. They are often used in biological / fermentation / bioreactor / cell culture / metabolic flux settings where gas composition is a key parameter

Condition: used, This listing is for the Hitech Instruments GIR250 Gas Analyser The unit is in full working condition and is ready for immediate use The GIR250 is a bench‑top / transportable analyser designed to measure oxygen (O₂) and carbon dioxide (CO₂) simultaneously in gas samples. It is made by Hitech Instruments (now part of the MTL / Eaton group). Its design emphasizes ease of use, reliability, and low maintenance cost. Tedsxhdqtspfx Ahusf Other supporting features: The instrument can be programmed with pass/fail criteria for each gas (alarms). It provides analog outputs, typically 4–20 mA, for external logging or control systems. Calibration is designed to be simple (via the front panel keypad) to reduce training burden. The O₂ galvanic cell is user-replaceable (i.e. maintenance can be performed in the field). Mechanical, Electrical & Operational Details The GIR250 is housed in a rugged, transportable case (lab-style) so it can be used as a benchtop or mobile analyser. Sample inlet and outlet connections use 0.25″ (~6 mm) tubing. The sample system should avoid condensation and contaminants; non‑condensing sample environment is required. Operating ambient temperature: –5 to +40 °C (for non‑condensing conditions) Power / interface: standard for bench‑top analysers (the catalogue doesn’t always detail it, but likely mains or DC supply, suitable for lab use) Typical Applications & Suitability Because it can measure both O₂ and CO₂ in a single unit, the GIR250 is used in applications such as: Respiration / breathing gas analysis / Douglas bag analysis (i.e. in physiological or experimental gas mixture measurement) Fermentation / bioprocess monitoring (where O₂ and CO₂ both matter) Gas mixture / inertisation / process gas quality (checking gas purity, calibrating mixtures) It is not primarily intended for measuring very low trace levels (ppm-level) of O₂ or CO₂ unless its ranges are suitably adapted or specified. The design is more for percent-range analysis