20 kWel CHP unit, natural gas & LPG

indop CHP UNUT INDOP20TO

Condition: used, Used Urschel model 1700 stainless steel Comitrol Processor. Recommended for size reduction applications of free-flowing dry and semi-dry products. Processor is designed to install three different reduction heads - slicing head, cutting head or microcut head (ONLY microcut head is inlcuded). Microcut rotor head is driven by 22 kW, 2938 rpm, 50 Hz electric motor. Cutting chamber is sealed and deters escape of dust, vapor and liquid. Includes switchboard and control panel. Dimensions are approximately 1300 mm lenght x 900 mm wide x 1800 mm high, weight approx 500 kg. Lhsdpfx Aeltlulebyjn

Condition: used, Year of construction: 1990, functionality: fully functional, overall weight: 9,700 kg, COGEIM E.O. 2000 VACUUM PADDLE DRYER – PHARMACEUTICAL DESIGN – 2,380 L High-quality horizontal vacuum paddle dryer from COGEIM, Italy, in a pharmaceutical design. The dryer features a horizontal, heated/cooled stainless steel container with a large front-opening lid, as well as a robust paddle agitator with scrapers. The parts in contact with the product are made of stainless steel 1.4435, and the inner surfaces are highly polished. The system is suitable for demanding drying, mixing, and vacuum processes in the pharmaceutical, chemical, and fine chemical industries. TECHNICAL DATA Manufacturer: COGEIM, Italy Type: E.O. 2000 Year of manufacture: 1990 Project/Job No.: C.89/040 Working/Nominal volume: approx. 2,380 liters Total container volume: approx. 3,100 liters Lhedpfx Asr Nclaebyjn Container: Operating pressure: -1 / +6 bar Operating temperature: -20 / +165 °C Product-contact material: Stainless steel 1.4435 Inner surfaces: Highly polished HEATING/COOLING SYSTEM The container can be heated or cooled via an external half-pipe coil. Volume of heating/cooling chamber: approx. 150 liters Operating pressure of heating/cooling chamber: up to +6 bar Material of heating/cooling chamber: Stainless steel 1.4306 Temperature range: -20 / +165 °C AGITATOR Robust horizontal paddle agitator with scrapers Large-area mixing of the product Agitator shaft seal via mechanical seal Laterally arranged gearbox/motor drive EQUIPMENT / SCOPE OF SUPPLY The existing scope of supply includes, among other things: - Filter for solids / dust filter - Feed device - Discharge valve - Rotary valve - Compensator - Drive and gearbox - Pneumatic fittings and components - Large front-opening lid - Support frame - Existing connection components - Existing technical documentation - Original installation/connection drawing The large front lid provides very good access to the interior and to the agitator for inspection, cleaning, and maintenance. CONDITION Used system in operational condition. The interior and the paddle agitator appear to be in very good condition in the available images. Technical documentation and original drawings are available. Further technical information, detailed photos, and excerpts from documentation can be provided upon request.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Lodpfx Asq H H Ruobyehn Technical data attached to the photos.

Condition: used, Year of construction: 1995, Concentrating plant for the juice industry. The plant dates back to 1977 and was rebuilt in 1992. It was extended and equipped with a new cooling tower circuit. The plant is designed for 6600 kg/h of cloudy apple juice. With a single-stage concentration, the juice is thickened from 12° to 25°Brix. Up to 71°Brix can be achieved in the second pass. Additional title: with aroma recovery Input quantity apple juice: 6600 kg/h Water evaporation: 4840 kg/h Lhsdowu N T Aspfx Abyon Discharge quantity concentrated juice: 1760 kg/h Steam consumption: 1685 kg/h Length: 7,70 m Width: 6,70 m

Condition: new, Year of construction: 2014, functionality: fully functional, power: 22 kW (29.91 HP), Unused inline mixer from Ystral Built-in frequency controller Top machine Ledpfxsvkpqhj Abyjhn

Condition: excellent (used), Year of construction: 2014, HERMANN WALDNER Agitated Tank 90.5 L Pressure-resistant magnetic stirrer with heating jacket Tank volume: 90.5 liters Jacket volume: 18 liters Ledpfx Absyn Rikoyohn Usable volume: approx. 70 liters Product-contact parts made of stainless steel Operating overpressure: inside: -1 / +5 bar Manufacturer: Waldner Year of manufacture: 2014 Space requirement: 90 x 95 x 175 cm Complete documentation available.

Year of construction: 2026, condition: new, New portable homogenizer with a 145 mm diameter rotor, made of AISI 316L in all parts in contact with the product, and with a polished finish Ra < 0.80 μm. It can withstand vacuum and a working pressure of 16 bar, and its motor has a power of 7.5 kW, providing a rotation speed of 2,930 rpm. It includes an atmospheric system for solid intake, which allows the direct injection of powdered solids into the homogenizer's intake. This process solves the problems of incorporating floating solids and improves processing time if all other ingredients are loaded through the hopper, as they are added directly to the homogenizing chamber. The hopper has a capacity of 50 liters and features a butterfly valve, which allows it to be closed and the inlet flow rate to be regulated. Ljdpfx Ajzktgcjbyshn All components are mounted on a wheeled cart to facilitate mobility. Production: 5,000 L/h Motor: 7.5 kW at 2,930 rpm 50 Hz Intake: DN50 Outlet: DN50

Condition: ready for operation (used), Conveyor length: 3000 mm, conveyor diameter: 250 mm, on-site inspection is possible, not energized. Lodpfezhnu Njx Abyohn

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,500 l, Equipment: documentation/manual, BRINOX 3,500 L Batch Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBHI-3500 Tag No.: BH6770-BH1001 Serial number: 1003460 Year of manufacture: 2020 Condition: As new / unused BH6770-BH1001 Package 28 TECHNICAL DATA Product type: Batch tank / pressure vessel Working volume: 3,500 liters Total volume: 4,304 liters Jacket volume: 202 liters Empty weight: 1,958 kg Product contact material: 1.4435 Jacket: 1.4404 CE marking: CE 0036 Permissible vessel pressure PS: -1 / +3 bar Test pressure vessel PT: 5.6 bar Permissible jacket pressure PS: -1 / +6 bar Test pressure jacket PT: 10.8 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 2 Design according to AD 2000 code Pressure vessel according to PED 2014/68/EU Category III Module G – Individual inspection Notified body: TÜV SÜD Industrie Service GmbH (ID number 0036) TÜV approval including final inspection and pressure test, fully documented. FAT – Factory Acceptance Test The vessel was fully FAT tested and approved at the factory. Tests carried out, among others: • Pressure test per PED • Visual inspection of all weld seams • Non-destructive tests (RT, PT according to test plan) • Dimensional and drawing comparison (as-built) • Internal surface roughness measurement (Ra ≤ 0.8 µm) • Calibration test of manometers • Marking verification • Complete documentation review Full FAT protocols available. DESIGN • Cylindrical, horizontal vessel • Double jacket with half-pipe system • Internally electropolished and passivated • High-gloss product contact surface • Pharmaceutical-grade welds • Manway DN 500 • Powder/product inlet DN 300 • CIP connections • Safety valve • Pressure and temperature connections • Agitator connection • Heavy-duty trunnion supports • Lifting lugs DOCUMENTATION – complete and structured Extensive project-specific quality and manufacturing documentation available, including: • EU Declaration of Conformity and guarantee certificates • TÜV certificate with acceptance report (Module G) • TÜV design review and certification • Material certificates 3.1 Lhjdpfoylng Ujx Abyen • Welder lists and welding procedure qualification records (WPQR/WPS) • Non-destructive test reports (RT, PT, etc.) • Analysis certificates for welding filler materials and gas • Company qualification certificate • Roughness protocol • Surface treatment report • Dimensional accuracy test report • Internal pressure test report • Calibration certificates • Reports and EU conformity of installed components • Parts list compilation • Detail drawings • Operating and maintenance manuals Complete digital documentation package available. CONDITION • Never used in production • Stock item • Interior surface absolutely as new • No corrosion • No signs of use • Industrial new condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production plants • Biotechnological applications SPECIAL FEATURES High-quality BRINOX pharmaceutical fabrication with complete PED Module G individual approval by TÜV SÜD, CE 0036 marking, and fully documented FAT inspection. Not a standard tank – this is audited project quality with comprehensive GMP-compliant documentation.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 1,500 l, Equipment: documentation/manual, BRINOX 1,500 L Process Vessel – 1.4435 – Double Jacket – PED Module G – TÜV – FAT – 2020 – Like New Lhjdpoykuhisfx Abyen Manufacturer: BRINOX d.o.o. Tag No.: BH6726-BH1001 Type: SVMBBI-1500 Year of Manufacture: 2020 Serial No.: 1003458 Equipment No.: 20051401 CE Marking: CE 0036 Condition: Like new / unused Empty weight: 866 kg TECHNICAL DATA Product type: Main filling vessel / process vessel Design: cylindrical with dished ends Working volume: 1,500 liters Total volume: 1,785 liters Product-contact material: 1.4435 Jacket material: stainless steel (double jacket design) Max. allowable pressure (PS) vessel: -1 / +3 bar Test pressure (PT): 5.4 bar Max. allowable temperature (TS): -10 °C / +150 °C Pressure vessel in accordance with PED 2014/68/EU Module: G Fluid group: 1 SURFACE & EXECUTION Internal surface: high-gloss polished, pharmaceutical design Product-contact areas made of 1.4435 Weld seams finely ground Pharmaceutical CIP-capable design EQUIPMENT • Double jacket for heating/cooling • Large manway with clamp closures • Multiple instrument and process nozzles • Pressure sensor / temperature connections • Bottom outlet • CIP/spray ball connections • Various blank flanges • Insulated media connections on jacket • FDA-compliant seals CONDITION • Never used in production • Stock item • Interior absolutely like new • No corrosion • No signs of use • Immediately available DOCUMENTATION – complete • EU Declaration of Conformity • TÜV acceptance documents • PED Module G documentation • Material certificates 3.1 • Pressure test report (PT 5.4 bar) • Technical drawings • FAT documentation • Operating manual SPECIAL FEATURE Large-volume BRINOX main filling vessel, 1,500 L in 1.4435, PED Category IV Module G, CE 0036, with complete documentation, pharmaceutical-grade surface finish, and pressure test at 5.4 bar. Project quality for sterile applications – immediately available.