Used Furniture for sale (669)

Condition: used, maximum load weight: 13,100 kg, overall weight: 16,000 kg, first registration: 01/2023, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 49 m³, total width: 2,550 mm, total height: 2,975 mm, Year of construction: 2023, Wagon No. CC_W1119457 - Manufacturer: Krone. * Simple corner fittings * Load certificate Code-XL * Portal door with simple rotating rod locks (outside) * Forklift accessible * Telescopic support legs Nkedpfx Aoyu N E Rjgwew * Device for rail loading * Partially keyhole system inside Smooth furniture floor. Long-term rental possible. Delivery time: AVAILABLE IMMEDIATELY. Rental in larger quantities possible. Furniture equipment. Ø Signs of use from short-term use / see pictures. Technically operational condition without further repair. Substructure with signs of use. UVV valid. LASI CODE XL!!!. Multiple available!. Dimensions are approximate. Offer is non-binding, intermediate sale reserved, prices net ex location D-59302 Oelde. Further details upon request by phone or email:

Condition: good (used), Year of construction: 2003, Tilting panel saw Altendorf F45 with ELMO IV-plus package, 2-axis scorer, 3m table, and Control-Plus control Sliding table length: 3000 mm Saw blade tilting from 0 to 45 degrees Speeds: 3000, 4000, 5000, and 6000 rpm with electronic speed display Drive motor: 5.5 kW with automatic motor brake Njdpoxw Ii Sofx Agwskw Control panel at eye level with Control-Plus control 4-axis CNC controlled Cutting of chain measurements and grooves on the rip fence and crosscut fence Cutting width correction on the rip fence and crosscut fence with tilted saw blade 600 cutting programs Calculator function with direct transfer of results to the respective axis Tool management Saw blade diameter up to 450 mm Max. cutting height: 150 mm Cutting width up to 1040 mm, electrically adjustable Tilting angle and height adjustment electrically adjustable Crosscut fence rail up to approx. 3210 mm, electrically adjustable, automatic coupling of the second stop flap for large dimensions Folding rip fence Extraction outlets: 120 + 80 mm Sliding carriage lockable Additional mitre fence rail 2 used saw blades and one scorer blade 2 riving knives 2-axis scoring unit, electrically adjustable during operation 2 blade guards 3 emergency stop switches Clipboard at the control panel CE marking Machine shows signs of wear. No cuts in the sliding table. Original paint (special paint finish), partially repainted in some areas. Machine has 18,985 operating hours. It originates from a furniture factory and has been regularly serviced and well-maintained. Condition as per original photos. A video of the machine in operation can be provided upon request. Approx. dimensions: 3150 x 3750 x 1900 mm (L x W x H). Weight approx. 1400 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this seller".

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Specification - Heavy duty thick steel monobloc frame electro welded. - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Vertical hopper feed loader with 3m length capacity Year - 2018 CE Condition - As new ex display [ only used for demonstrations.] Nkjdpfx Asv Aalysgwew

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, Order picker with large front platform for transport trolleys Year of manufacture: 2021 Platform height: 14 meters Picking height: 16 meters Front insertion for large roll cage trolley (trolley dimensions: length 2080 mm / width 1338 mm / loading height 520 mm) Ideal for operations handling large parcels, furniture, bicycles, etc. In stock: 4 units available / operating hours approx. 800 / 900 / 1500 / 1900 / battery 5 PzS775AH + charger Njdpfjx Ed Rhex Agwjkw

Condition: used, workpiece height 20-90 mm device 1: Schleifaggragat device 2: Fräsaggregat device 3: Profilschleifaggregat Automatic edge processing machine Rehnen type KBA for the automatic processing and rounding of edges on wood and panel materials. The machine is suitable for precise sanding, deburring and rounding of workpiece edges and enables a consistently high surface quality. Ideal for joineries, furniture making and industrial woodworking. Includes replacement sanding belts and cutters. Unit 1: Sanding unit, oscillating Unit 2: Milling unit, top and bottom Nsdpfxjyb Sdce Agwskw Unit 3: Profile sanding unit Accessories: For edges R5

Condition: good (used), Code: 0344 Brand: SCM MINIMAX Model: FS 41/C - CE Standard 3 Works combined machine (Surface/ Thickness/Mortiser) for wood, carpentry, furniture, window frames , doors, plastics, and various - CE Standard Nodpfx Ajyxfy Hsgwokw Technical data: Planer shaft with n° 3 “Tersa” knives Working width 410 mm Total length of surface tables 2000 mm Guide inclination 90–45° Thickness table dimensions 410 x 605 mm Thickness feed speed 7 m/min Thickness min/max working height 3/230 mm Three-phase motor 6,5 Hp Cast iron mortiser: table dimensions 430 x 220 mm Spindle connection diameter 16 mm Wheels for moving the machine Suction port diameter 120 mm Overall dimensions mm 2000 x 1000 x 1100 h Weight kg 340

Condition: good (used), Code: 0343 Brand: PUTSCH MENICONI Model: SVP 950-M - CE Standard Manual vertical panel saw for carpentry workshops, for vertical and horizontal cutting of panels, semi-finished products, furniture, doors, window frames, plastics and composite materials - CE Standard Technical data: Cutting length 5300 mm Cutting height 2200 mm Max cutting thickness 80 mm Motor power 7,5 Hp Blade diameter 300 mm Nkjdpfeyxc Tkox Agwsw Blade speed 5000 rpm Automatic electric sliding table to prevent damage to the support strips during horizontal cuts Small parts support device Liftable castor device for panel sliding Overall dimensions of assembled machine: mm 6500 x 1500 x 3000 h Overall dimensions for transport: Frame mm 6500 x 600 x 2350 h - Weight kg 590 + Column mm 3100 x 1130 x 1150 h - Weight kg 600

Condition: used, mileage: 491,364 km, power: 205 kW (278.72 HP), first registration: 10/2012, fuel type: diesel, empty load weight: 6,810 kg, maximum load weight: 5,180 kg, overall weight: 11,990 kg, wheelbase: 4,815 mm, fuel: diesel, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 8,950 mm, loading space length: 7,000 mm, loading space width: 2,400 mm, loading space height: 2,400 mm, Year of construction: 2012, construction height: 3,650 mm, Equipment: tail-lift, trailer coupling, The 2012 Iveco EuroCargo ML 120 E28/P is a used box truck characterized by its robust construction and versatility. With a mileage of 491,364 km, it remains in good condition despite intensive use. The vehicle is powered by a powerful 205 kW (279 hp) diesel engine with a displacement of 5,880 cc. It complies with the Euro 5 standard and has a Green Environmental Badge. This truck offers a spacious loading area of 7.00 x 2.44 x 1.98 meters and is equipped with a trailer hitch and a lifting platform, making it ideal for transporting furniture or other large items. With a permissible gross vehicle weight of 11,990 kg and a wheelbase of 4,815 mm, the truck combines solid performance and flexibility. The EuroCargo is painted in a striking metallic yellow and is equipped with a manual transmission. The spacious cab seats three people, ideal for teamwork while driving. A viewing can be arranged at a flexible time. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted. Njdpettb Uujfx Agwokw

Condition: used, mileage: 551,414 km, power: 205 kW (278.72 HP), first registration: 09/2012, fuel type: diesel, empty load weight: 6,830 kg, maximum load weight: 5,160 kg, overall weight: 11,990 kg, wheelbase: 4,815 mm, fuel: diesel, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 8,950 mm, loading space length: 7,000 mm, loading space width: 2,440 mm, loading space height: 1,980 mm, Year of construction: 2012, construction height: 3,400 mm, Equipment: tail-lift, trailer coupling, The used Iveco EuroCargo ML 120 E28/P is a versatile box truck, ideal for transporting furniture or other goods. Its robust 5,880 cc diesel engine produces 205 kW (279 hp) and meets Euro 5 emissions standards. With a mileage of 551,414 km, the vehicle is in used but well-maintained condition and offers space for three people. Nkodpfx Agsufpxvswow The body measures 7.00 x 2.44 x 1.98 meters, ensuring ample storage space. The truck's overall dimensions are 8,950 mm long, 2,550 mm wide, and 3,400 mm high. The permissible total weight is 11,990 kg. The truck features a manual transmission and a trailer hitch, making it particularly suitable for flexible transport applications. The EuroCargo is finished in metallic yellow and was first registered in September 2012. It comes with a green environmental sticker and, with its special features and single previous owner, offers a solid foundation for commercial use or export. Inspections are possible at any time, and a variety of services are available, such as registration services or delivery within Germany for an additional charge. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: used, mileage: 506,097 km, power: 206 kW (280.08 HP), first registration: 10/2014, fuel type: diesel, empty load weight: 6,960 kg, maximum load weight: 4,030 kg, overall weight: 11,990 kg, wheelbase: 4,815 mm, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, total length: 8,900 mm, loading space length: 7,050 mm, loading space width: 2,400 mm, loading space height: 2,100 mm, Year of construction: 2014, construction height: 3,350 mm, Equipment: tail-lift, trailer coupling, Clutch damage. The used Iveco EuroCargo ML 120 E28/P offers a reliable choice for furniture and freight transport needs. This truck was first registered on October 23, 2014, and has a mileage of 506,097 km. Equipped with a 6,728 cc diesel engine producing 206 kW (280 hp) and an automatic transmission, the vehicle complies with the Euro 6 standard and is equipped with a green environmental sticker. The vehicle's box body measures 7.00 x 2.44 x 1.98 meters, providing ample space for transporting goods. The truck has a yellow metallic paint finish and is approved for a maximum gross vehicle weight of 11,990 kg. The wheelbase is 4,815 mm, ensuring stable and safe maneuverability. With two doors and three seats, the vehicle offers a practical interior layout for professional use. The Iveco EuroCargo was used by one previous owner and is still in good condition. Viewings are possible without prior appointment during the stated business hours. Njdetp N U Tepfx Agwskw Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: ready for operation (used), Year of construction: 2006, Edgebander manufactured in 2006. This HOMAG Optimat KAL 330 features a flexible production layout for furniture parts, accommodating workpiece dimensions from 250 to 3000 mm in length and 120 to 1200 mm in width. It includes a single-sided edge banding machine capable of processing various edge materials up to 20 mm thickness. If you are looking to get high-quality edge processing capabilities, consider the HOMAG Optimat KAL 330 edgebander we have for sale. Contact us for further details. • Line workpiece capacity: • Length 250–3000 mm • Width 120–1200 mm • Thickness 8–60 mm • Edge bander (KAL 330) — base and transport • Continuous machine base; workpiece support with roller bar extendable ~800 mm • Transport chain 80 mm wide with rubber surface; precision guidance, hardened surfaces • Top pressure: driven belt • Technical data: • Feed speed 18–25 m/min Nkjdpfx Asytf Irsgwow • Working height 950 mm • Minimum working width: 55 mm at 22 mm thickness; 100 mm at 60 mm thickness (depending on workpiece length) • Workpiece overhang/supernatant 30 mm • Workpiece thickness 12–60 mm • Edge material from strip: 0.4–20 mm (max cross-section 900 mm²) • Edge material from coil: 0.3–3 mm (max cross-section: PVC 135 mm², veneer 100 mm²) • Max coil diameter 830 mm • Pneumatic connection 7–8 bar • Infeed system and controls (integrated with KAL 330) • Flexible workpiece infeed system wz10 for automatic infeed (lengthwise and crosswise); for precisely sized, square parts • Stepless infeed guidance adjustment (axis), speed set at input terminal • Automatic side adjustment of units (workpiece overhang 30–80 mm) for gluing and post-processing • Input terminal; solvent applicator top/bottom • Edge preparation and gluing • Pre-milling unit: 2 motors, each 4 kW, 150 Hz, 9000 rpm; electro-pneumatic control • Stepless vertical axis SF20 for automatic centering to panel thickness • Pre-melting unit with granule storage • Quick-lock system for QA/QE application unit; QA front glue storage for color change • Basic gluing unit A20; magazine height adjustment ±5 mm (manual spindle) • Extended magazine A6/A-E12/A20 for 2 coils (max Ø 830 mm); preheating station for QA/QE • Automatic pressure zone adjustment • Trimming and milling • Trimming unit HL84 with standing trimming stop for sensitive edges • Pneumatic trimming motor adjustment (2 positions: flush/level and with overhang for contour milling) • Pneumatic chamfer/straight changeover; manual side trimming stop adjustment when edge thickness changes • Rough milling unit: 2 motors stacked, each 1.5 kW, 200 Hz, 12,000 rpm; height adjustment via top pressure • Pneumatic 2-position setting: roughing with ~0.2 mm overhang / without overhang • Reserved free space for a fine milling unit • Contour milling unit Servo FK13 automatic: • 2 motors each 0.4 kW, 200 Hz, 12,000 rpm • Servo-controlled movements; automatic 8-fold tool changer • Feed speed max 20 m/min; minimum spacing between workpieces 500 mm • Workpiece thickness 12–60 mm • Automatic FK adjustment for identical radii on different edge thicknesses; auto retract • FK workpiece guidance with additional clamping for min part length 120 mm (single-sided) • Finishing and cleaning • Multi cleaning unit MN21 automatic: • Up to 3 profiles; tracing from top/bottom/side for chamfer and rounding on pre-milled PVC edges • Electropneumatic air nozzles; automatic chamfer/radius changeover; auto retract of upper/lower tool • Height adjustment via top pressure • PVC shavings separator top/bottom

Condition: used, This listing is for the Bigneat Chemcap Ductless Fume Cabinet The unit is in full working condition and is ready for immediate use The Bigneat Chemcap Ductless Fume Cabinet is a recirculating fume hood designed to protect laboratory users from hazardous fumes, vapours, gases and particulates without the need for external ductwork. Instead of venting contaminated air outside a building, it draws air into the cabinet, filters it, and then returns clean air back into the room. This makes it ideal where installing conventional ducted extraction would be difficult, costly or disruptive. Filtration & Safety Chemcap™ carbon filtration: specialised carbon media to capture a wide range of chemical vapours. Optional HEPA filtration: for removing particulates as well as gases (available on some models). Recirculatory operation: cleans and returns air to the room, eliminating hazardous external emissions and reducing energy loss Nksdjyliq Iopfx Agwsw Usability & Convenience Benchtop or stand-mounted: sits on a lab bench or on dedicated support furniture. Portable and easy to install: no need for building ductwork. Clear acrylic panels: offer all-round visibility of the workspace. Touch-button controls with a service-due indicator. Quiet operation (~

Condition: good (used), Code: 0342 Nkedpfx Asywm A Hogwsw Brand: VITAP Model: ALFA 35 - CE Standard Semi-automatic multiple boring machine with 35 spindles for furniture, kitchens, bathroom furniture, custom-made furniture, panels - CE Standard Technical data N° 35 spindles with quick coupling Centre distance between each spindle mm 32 Centre distance between first and last spindle mm 1088 Max depth of hole mm 70 Board dimensions mm 1330 x 500 Spindle rotations per minute 2800 Motor power Hp 3 Turret with 6 different depth positions Side fence Horizontal/vertical 45 degree pneumatic tilting head Metric bar 3000 mm with stops Operating pressure 6- 8 atm Overall dimensions mm 1590 x 860 x 1250 h Weight kg 454

Condition: good (used), Code: 0300 Brand: CASADEI INDUSTRIA Model: V320 - CE Standard Automatic edge bander for pre-glued edges, for carpentry, furniture, custom-made furnishings, doors, panels and various items - CE Standard Features: Automatic upper feeder with toothed belt, speed 5 mt/min, height adjustable by means of handwheel with numerical position indicator Infeed guide Pneumatic coil cutting shear Automatic front and rear pneumatic end trimmer Upper/lower end trimmers at 11000 rpm with cutters Z4 Work surface 1800 mm with 7 adjustable rollers and polyzene slide guides Njdoyk Hgkspfx Agwokw Extendable front support for large panels Technical data: Min/max panel thickness 10-45 mm Edge thickness in coil 0,4-2 mm Min panel length 220 mm Min panel width 110 mm Gluing unit: Blower power LEISTER W 3400 - Temperature adjustment Total installed power 2 kW Suction port diameter 120 mm Overall dimensions mm 1800 x 700 x 1300 h Weight kg 236

Condition: ready for operation (used), Year of construction: 2024, total height: 2,500 mm, overall weight: 3,700 kg, This laminating press was manufactured in 2024. It features a robust servo-hydraulic drive system and operates at pressures between 6-8 bar. With a substantial footprint of 1000 × 2500 mm and a working table size of 1500 × 1000 mm, it is ideal for panel processing and interior components. Consider the opportunity to buy this Other COMAG MPM 1500-1000 T6-E laminating press. Contact us for more information. • Pneumatics and hydraulics: • Operating pressure: 6–8 bar • Drive system: Servo-hydraulic drive • Electrical data: • Electrical connection: 3 × 400 V / 50 Hz • Number of phases: 3L • Maximum power: 30 kW • Maximum current: 100 A • Applications: • Laminating, punching, and edge folding of panels • Trimming and edge foiling of panels • Processing of armrests and central armrests • Production of railings, handles, back covers, and door handles • Typical use: Ideal for panel processing interior components; also suitable for the furniture industry Dimensions Nedpfxoyglkme Agwjkw Machine Depth 2500 mm

Condition: good (used), Code: 0072 Brand: T.O.P. ITALIA Model: FS 850 - CE Standard Drilling and inserting gluing machine + dowel pins on horizontal workpieces for furniture, custom-made furniture, kitchens, bathroom furniture - CE Standard - Year 2018 Technical data: Maxworkable length mm 1600 Max workable height 850 Panel thickness mm 8 - 50 Nksdpfeyv Inzjx Agwjw Independent drilling aggregate: Rotation speed 6000-18000 rpm - Max drilling depth mm 35 - Drilling depth adjustment - Hole cleaning system Glue + dowel insertion unit: Dowel dimensions mm 8 x 30 - Max dowel protrusion 15 mm Glue and water system: Container for automatic glue feeding and system cleaning Feeder for automatic pin loading Numerical control and operator interface: Albatros numerical control for 4-axis control - Touch screen supervisor PC - Monitor 12" TFT - Windows operating system - Parametric CAD 3D TPAEdi32 Compressed air 6 bar Overall dimensions mm 1800 x 1900 x 2100 h Weight kg 500

Condition: used, Motor output 1,5 kW Cutting height ca. 95 mm Saw blade diameter max. ca. 300 mm Table dimensions 560 x 710 mm Ulmia 1622 circular table saw for precise rip and cross cuts in solid wood and wood-based materials. The robust design enables reliable work in the trade and in the workshop. Ideal for joineries and general wood and furniture construction. Nksdpfxjythd Ae Agwew

Condition: good (used), Code: 0339 Brand: WEINIG Model: PROFIMAT 23/E - CE Standard Automatic 5-spindle moulding machine for the production of frames, furniture parts, windows, doors, moldings, broom handles, wooden toys, and various - CE Standard Features: Heavy-duty base made of solid cast iron Chainless cardan feed: precise, robust, and durable Special feed roller teeth that reduce the depth of entry into the wood Compact feed system Pneumatic pressure on the feed rollers DIGISET WEINIG for left and upper spindles: tool adjustment is performed directly via dual digital displays Technical data: Min/max working width 20/230 mm Max working height mm 120 Feed speed variator 5–24 mt/min Shaft diameter mm 40 Shaft speed rpm 6000 Feed roller diameter 140 mm Pre-planing table length 2000 mm Soundproofing and full protective coating Motorized vertical feed adjustment Side roller pressure opposite the first right shaft Motorized upper shaft adjustment Automatic table lubrication Composition: 1° Spindle Lower Planer - Min/max diameter 125–145 mm - Motor 5,5 Hp 2° Spindle Right Vertical Spindle moulder - Min/max diameter 100-200/180 mm - Axial adjustment 3° Spindle Left Vertical Spindle moulder - Min/max diameter 100-200/180 mm - Axial adjustment - Motor power for 2 vertical spindles 7,5 Hp 4° Spindle Upper Planer - Min/max diameter 100/200 mm - Motor 5,5 Hp - Axial Adjustment Njdpfx Agoyvut Dewjkw 5° Spindle Lower Planer - Min/max diameter 100/200 mm - Motor 5,5 Hp - Axial Adjustment N° 5 planing heads included Suction port diameter (N° 5) 140 mm Compressed air 6-8 bar Overall dimensions mm 3400 x 1600 x 1600 h Weight kg 3000

Condition: used, cutting width 250 mm Nkodpfx Aeyr Slbogwjw Table dimensions 500 x 650 mm Saw blade diameter max. ca. 300 mm Frommia KS 381 table saw for precise longitudinal and cross cuts in solid wood and wood-based materials. The robust construction, angle stop, and swivel table enable reliable work in crafts and workshops. Ideal for carpentry shops and general woodworking and furniture construction.

Condition: like new (used), Year of construction: 2010, functionality: fully functional, UV-Coating line, including drying unit for coating primer and protection lacquers as well as processing full sized finishings of digital printable media, running through with solvent-free UV-lacquers and direct lacquer curing with UV-radiation. A maximal plate height of 80 mm can be coated steplessly. Blobtra Devcmd Asi Njd Suitable for almost all surfaces within digital- and screen printing. High quality surfaces are guaranteed. Key Benefits - adjustable UV-power for individual setting up to the different coating requirements - EVG power supply unit for a building main fuse of 63 A. - central access for compressed air and electricity for the entire machine Application - varnishing of all firm materials up to height of 80 mm Nksdpfxjvcmd As Agwow - applying of primer e.g. for glass or furniture surfaces - varnishing of all UV-printed plates - foil inscription for vehicles - lacquer and priming of many flexible materials - displays - digital pictures, luminous exposure - inkjet prints - colored coatings and many more

Condition: good (used), Code: 0266 Brand: ROBOPAC Model: ROTOPLAT 106/FRD - CE Standard Stretch wrapping machine with rotary table for wrapping pallets, boxes, cabinets and various materials various materials, various sectors such as food, beverages, detergents, chemicals, construction, furniture, logistics and various With loading ramp Rotating table diameter mm 1650 Film tension adjustment Load capacity 2000 kg Rotating plate diameter mm 1650 Clutched reel carriage FRG Table rotation speed rpm 5/12 Height mm 2100 Ascent/descent cycle Njdpex H Tprofx Agwokw Ascent/descent cycle only Power supply volt 220/50 Total power Kw 1,4 Overall dimensions: mm 1650 x 2600 x2700 h Weight kg 450

Condition: good (used), Code: 0085 Brand: BIESSE ARTECH - ITALY Model: SINGLE - CE Standard Edgebander for straight and shaped panels with glue pot with automatic feed for edges in wood, pvc, abs, veneer, for furniture, kitchens, panels, joinery, custom-made furniture - CE Standard Technical data Panel height from mm 10 to 60 Edge thickness mm 0,4 - 3 Minimum radius mm 25 Nkedpfx Agowut Tgowsw Feed speed from 4 to 16 mt/min Glue pot capacity approx 3 litres Motorised feed at variable speed mt/min 4/18 End cutting blade unit for cutting excess edge lengths Tilting table Telescopic support roller conveyor for supporting large panels Compressed air 6 bar Total power consumption Kw 5,2 Overall dimensions mm 1700 x 900 x 1500 h Weight kg 350 Top/bottom trimmer Speedy Panel height mm 10/60 Absorbed power Kw 1,5 Compressed air 6 bar Overall dimensions mm 900 x 750 x 1150 h Weight kg 10

Condition: good (used), Code: 0338 Nsdpfxsyvh Sys Agwskw Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Automatic edge bander with a cartridge-based adhesive system for wood edges, pvc, abs, veneer, suitable for furniture, panels, custom-made furnishings, kitchens, bathroom cabinets, carpentry shops, and various - CE Standard Features: Quick glue replacement: patented cartridge system that allows for quick and efficient switching between EVA and PUR glue during operation, or for changing glue colors - Simply replace the cartridge, no complicated cleaning of the glue tank is required - Ready for use in 3,5 minutes Technical data: Min/max panel height mm 6/45 Applicable edge thickness mm 0,4 - 6 Max gluing height mm 51 Min panel width mm 60 Min panel length mm 180 Feed speed mt/min 8 Composition: Gluing unit: Automatic feed for roll and strip edging - Patented Holz Her cartridge system - Roller press unit Tilting front and rear end trimming unit - Motors 0,22 Kw Multifunction unit with controlled axis for trimming and chamfering - N° 2 motors 0,6 Kw Edge scraper unit Glue scraper unit for removing any glue residue Brush unit for perfect cleaning Holz Her control system: Rotatable and tiltable control panel - All units can be activated individually - Unit functions with text display and graphical support - Display for unit preselection - Program list with program names and numbers - Self-diagnosis Soundproof booth Compressed air 6-7 atm Overall dimensions mm 4300 x 1200 x 1675 h Weight kg 1700

Condition: good (used), Code: 0330 Brand: FBR Model: L 85/1500 - CE Standard Automatic belt sanding machine with double gooseneck for wood, joinery, furniture, window frames, aluminum, metals, and various materials - CE Standard Technical data: Work surface dimensions mm 1450 x 700 Automatic table lift Vertical stroke mm 750 Motor power 3 Hp three-phase Max belt length mm 4500 Belt width mm 120/150 Suction port diameter mm 100 Overall dimensions mm 2550 x 1250 x 1550 h Njdpfx Agjyu Ttrowjkw Weight kg 320

Condition: good (used), Code: 0328 Brand: ITALPRESSE Model: GL / 14,5 - 50 - 420 T - CE Standard Hydraulic press for composite materials and solid surfaces, moulds and decorative panels, suitable for use in the aerospace, aviation, woodworking, furniture, interior design, automotive, shipbuilding, construction, energy, defence, sports and public transport sectors, and various – CE Standard – Year 2005 Technical data: N°5 solid steel plates 1450 x 500 mm N° 3 pistons Nkjdpfx Ajyuyl Iogwew Diathermic oil heating Total thrust 420 tonnes Working diagram - see enclosed diagram Max power 9,3 Kw Full-load current 19 A The oil tank is located on top of the press and is fitted with a sight glass for checking the oil level Fluid (oil) temperature controller Two-hand control for closing the press Photocell safety barriers Fixed safety guards