Used Fume Extraction for sale (4,628)

Condition: used, Year of construction: 2011, operating hours: 2,591 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,400 mm, total length: 1,250 mm, total height: 4,000 mm, volume flow: 10,000 m³/h, filter area: 100 m², suction capacity: 10,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P10. The main areas of application for these systems are industrial plants/welding shops where point extraction is not feasible or where point extraction is insufficient to maintain air quality in the hall. Laterally mounted ducts with a pollutant collection point at a height of 3 m draw in contaminated air and direct it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses are supplied to clean the cartridge filters automatically at the required intervals. Upon impact, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the hall towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Laodpfez N Am Uox Akweh Low compressed air consumption thanks to the "Power-Spray" system. Parameters: Capacity - 10,000 m3/h Motor power - 11 kW Filtration area - 100 m2 Fan in a sound-absorbing housing Year of manufacture - 2011 Number of operating hours - 2591 h Dimensions: Height - 4.00 m Base width - 1.20 m x 0.80 m Stock number: 1173

Condition: ready for operation (used), Euromate MFS UltraFlex Mobile Extraction Unit Mobile Filter Welding Fume Extraction Airflow: approx. 800 – 1,500 m³/h Arm length: 4m Pipe diameter: Ø203mm You are welcome to arrange a viewing appointment. We can also organize affordable shipping for you! Ljdpfxoymlc Ne Akwsah You will receive a proper invoice. For international customers, a net invoice can be issued. A valid VAT ID number is required. Subject to prior sale. Visit our shop and check out our other offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the item description may occur and are subject to change.

Condition: used, Year of construction: 2017, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 130 m², suction capacity: 10,000 m³/h, input frequency: 50 Hz, Dust extraction unit, fume extraction system for welding, self-cleaning filter, pneumatic, vacuum dust collector, absorber for plasma, laser, sandblasting, and all types of dry dust. Cartridge filter elements are pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. The fan is located behind the filter on the clean air side, which minimizes the risk of explosion. Laodpfx Akoz Hlrteweh Brand/Model: GRAM / Zyklonfilter ACF 130H Year: 2017 Fan power: 15 kW Capacity: up to 10,000 m3/h Filtration area: 130 m2 Filter cartridges: 5 pcs Inlet diameter: 500 mm Rotary valve/airlock for dust discharge Dimensions: height: 3.10 m diameter: 1.95 m fan: height: 1.25 m width: 1.20 m x 0.80 m stock number: 0561

Condition: used, Year of construction: 2011, filter area: 418 m², suction capacity: 14,000 m³/h, negative pressure: 3,600 Pa, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Brand: VALCO Model: PPX-18-W3 Thanks to the W3 approval, the filter in this version can be used when welding high-alloy steels. The filter is cleaned with compressed air pulses during operation, which ensures high efficiency of the device. The fan is on the clean side, which reduces the risk of explosion to a minimum. Parameters : Lasdpfx Aswiuaqskwsh Efficiency - 14000 m3/h Negative pressure - 3600 Pa Filtration area - 418 m2 Cartridge filter inserts - 18 pieces Fan - 15 Kw Inlet diameter - 450 mm total length - 2.80 m total width - 1.35 m height - 4.00 m Device from 2011 Full technical documentation available. There are 2 pieces of this device available. Stock no.: 0986 1/2

Condition: as good as new (ex-display), machine/vehicle number: 20170140, TEKA AirTracker Basic - Room Monitoring System Professional room monitoring system that measures particulate matter, temperature, humidity, and noise levels. More than just a dust measurement system! Certified measurement sensors High-visibility LED display for dust levels Individual configuration of dust thresholds Dedicated TEKA Connect Wi-Fi AirTracker Control of fans or filter systems from the TEKA series Display and analysis of measurement data Display and readout of measurement data Trend display for evaluation / data logger Readout of data via web interface Wall-mounted, ceiling-mounted, and floor-standing units. One device – many possibilities! Built-in high-performance PC of the latest generation (MX6 with 2 cores) Wi-Fi control/UART Lodjv Taq Repfx Akweah The innovative, intelligent room monitoring system of the future. The European division of the World Health Organization (WHO) has urged the EU to impose stricter air quality standards. The innovative, intelligent solution from TEKA: AirTracker indoor air monitoring is used. The newly developed sensor in the TEKA AirTracker series detects particles smaller than 100 nanometers and impresses with its evaluation from 0 to 30 mg/m³ with an accuracy of ± 0.1 mg/m³, documented and with a test certificate. Creating trust. High-tech sensors guarantee reliable measurement values and safety. Individual settings of the threshold/limit values set the course for a secure future. As soon as the configured threshold is reached, the sensor indicates the current status of the particulate matter concentration via two highly visible, large LED strips with a traffic light function. The optionally available AirController can be used to control fans or filter systems from the TEKA series, depending on the particulate matter load. Ready-to-Go: Industry 4.0 – TEKA AirTracker. Companies can document compliance with employers' liability insurance regulations, manually or using the data logger (optional), in advance of BG inspections. Always keep an eye on prevention and employee health – building trust. Dust, whether coarse or fine – up to nanoparticles, particulate matter categories PM2.5 for A dust or PM10 for E dust – the TEKA AirTracker, with its newly developed sensor, monitors particulate matter within a radius of over 30 meters with an accuracy of +/- 0.1 micrometers and certifies this – feel safe. The TEKA AirTracker comes standard with other innovative sensors. It also measures air temperature, humidity, and sound levels. Networked sensors/actuators are the future of Industry 4.0. TEKA is already embracing this networked technology. TEKA sensors/actuators are already an integral part of industry. With a suitable smartphone, tablet, or PC, you can download the TEKA AirTracker app, which displays the current room temperature, humidity, particulate matter levels, and noise levels in the ambient air. Various setting and function options in the app round out its user-friendliness and functionality. There are many "dust sensors" available. However, quality and safety can only be achieved through the networking of certified sensors that document the measurement data.

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Ljdpfx Akey N Duqowjah Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 875 kg, volume flow: 2,750 m³/h, Donaldson dry extraction unit for sale Capacity: Q 2.750 m³/h 5,5 KW further technical data see pictures Condition very good. Can be viewed at any time Laodpfjulgl Iex Akweh

Condition: used, Year of construction: 2012, type of input current: three-phase, input voltage: 400 V, total width: 1,150 mm, total length: 2,150 mm, total height: 4,300 mm, filter area: 286 m², suction capacity: 16,000 m³/h, input frequency: 50 Hz, Dust extraction system, fume extraction for welding, self-cleaning cartridge filter, pneumatic, under-pressure system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFO4-16 Year of manufacture: 2012 Cartridge filter inserts, oval - DFO ULTRA-WEB FR - 16 pcs Filtration area: 286 m2 Fan power: 22 kW Fan model: ART 632/N4 Capacity: 16,000 m3/h Noise silencer included. We also offer new filter inserts on request, tailored to the intended use of the equipment. Lajdsz Nx S Tspfx Akwoh Stock number: 0018

Condition: good (used), suction capacity: 3,300 m³/h, negative pressure: 2,000 Pa, Dust extraction, welding fume extractor, self-cleaning filter, cartridge filter for plasma, laser, sandblasting, shotblasting Lsdjunh Uvjpfx Akwjah The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: DUST HOG / UAS Model: SBS-4-2 SD Engine power 4 Kw Fan in sound-absorbing housing Capacity 3300 m3/h Vacuum - 2000 Pa Filtration area - 112m2 Inlet diameter - 300 mm Cartridge filter cartridges - 4 pieces. Height - 3.90 m depth - 1.70m width - 1.25m

Condition: new, Year of construction: 2026, The CORMAK ODL4K extraction and filtration system is a modern solution that ensures safe working conditions for operators and effective protection of laser system components against contamination and damage. Filtration at a level of 99.9% removes harmful particles and fumes, guaranteeing clean air in the workplace. ODL4K stands out with an automatic filter cleaning system, an efficient fan, and a compact, solid design that allows for easy integration with various cutting systems. An additional advantage is the ergonomic waste drawer, which allows for quick and convenient emptying of collected waste. The modern ODL4K extraction system ensures effective filtration of contaminants and protection of the most important components of the laser system. ODL4K combines automatic filter cleaning with compressed air, an efficient fan generating high negative pressure and filtration at a level of 99.9% for particles of 0.3 μm thanks to the use of appropriate filters. The system is equipped with an ergonomic dirt drawer, which allows for quick and convenient removal of accumulated dust without the need for disassembly. Additionally, thanks to the modular design, it is possible to mount extraction nozzles on both the left and right side of the device, which allows for flexible adjustment of the installation to the layout of the production hall. ODL4K is a compact, efficient and reliable solution for any laser cutting system - increasing safety, comfort and work efficiency. Lodpjwcdrvofx Akweah The main functions of the exhaust gas extraction and filtration system in the laser processing process are: Removal and neutralization of laser smoke. Ensuring work safety at the laser station and in its immediate vicinity. Extending the service life of laser systems by keeping them clean and protecting important components from contamination. The most important advantages of the CORMAK ODL4K extraction system: The extraction system has automatic filter cleaning using compressed air. Under the influence of pressure, the filter is "shaken off", which effectively cleans the filter cartridge and thus extends its service life. Thanks to this, the system maintains its efficiency for a longer period of time. The filter element used in the system is imported and made of high-quality material. The Nano-type fire-resistant filter has high filtration efficiency, retaining particles of 0.3 μm in more than 99.9%. The large dust collection drawer allows convenient collection and cleaning of dust, which makes the system easy to maintain. The motors used in the system are equipped with overload protection, thus ensuring a high level of protection and trouble-free operation. The specially developed high-performance fan wheel generates a large negative pressure, which allows effective removal of laser exhaust gas and ensures high airflow efficiency. The total purification efficiency of the system is 0.3 μm, and the efficiency is more than 99.9%, which shows the high efficiency of the exhaust in removing harmful particles from the air. In addition, it is characterized by a compact structure, which makes it easy to operate and maintain. Technical parameters: Number of filter cartridges 4 Air flow 4000 m³/h Air pressure 3000 Pa Filtration efficiency 99.99% Filter size 350x660 mm Fan power 5.5 kW Inlet diameter 250 mm Weight 420 kg Dimensions (L x W x H) 1050 x 1400 x 2250 mm

Condition: used, We are offering a welding fume extraction unit from the brand Euromate. Please contact us for a quote. Ledpfx Akjxz R Aiswsah

Condition: good (used), Storage location: 3108 Manufacturer: TEKA Year of manufacture: 2012 Operating hours: 5,618 h Type: Strongmaster IFA Serial number: 6907210061062 Airflow rate: 3,000 m³/h Outrigger length (approx.): 3,000 mm Features: mobile Accessories: new filter insert Connection: 1.1 kW, 400 V Weight: 160 kg Lasdpfoy T Uxnox Akwsh Dimensions: 800 x 800 x 1,500 mm (without hose) Hose length: approx. 4,000 mm

Condition: good (used), filter area: 180 m², suction capacity: 9,000 m³/h, Dust extraction, welding fume extraction, filtering, self-cleaning filter, pneumatic, vacuum dust collector, absorber for plasma, laser, sandblasting and all kinds of dry dust. PLYMOVENT MDB / AZUR Cartridge filter cartridges cleaned pneumatically with pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. inlet diameter - 400 mm The fan has a power of 7.5 Kw. Capacity up to 9000 m3/h Filtration area of 180 m2 Dimensions: height - 3.10m width - 2.80m depth - 1.25m Laodpsu A Thljfx Akwsh fan: 1.00m x 1.00m

Condition: used, Year of construction: 2017, functionality: fully functional, type of input current: three-phase, filter area: 216 m², suction capacity: 8,000 m³/h, negative pressure: 3,200 Pa, Dust extraction unit, fume extractor for welding, self-cleaning filter, pneumatic, vacuum-based, designed for continuous operation. Suitable for plasma cutting, laser cutting, sandblasting, soda blasting, welding, and all types of dry dust. The fan is located behind the filter on the clean air side, which minimizes the risk of explosion. Ultra Web filter cartridges are pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Lodsy T Iyrjpfx Akwoah Brand: FÜCHTENKÖTTER Model: FKPF 192/12 Fan power: 11 kW Airflow: 8000 m3/h Vacuum: 3200 Pa Nozzle diameter: 500 mm Number of filter cartridges: 12 pcs. Filtration area: 216 m2 Year of manufacture: 2017 New filter cartridges (coated with impregnant) Dimensions: Height: 4.02 m Width: 3.95 m Depth: 1.85 m Base: 2.50 m x 1.70 m Stock number: 1120

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18133-00 12632868, input voltage: 400 V, Nederman ventilation unit for extraction of paint dust, oil mist, and contaminated air Laedjw Hw Dgopfx Akweh

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: three-phase, overall weight: 1,200 kg, input voltage: 400 V, total width: 1,050 mm, total length: 1,920 mm, total height: 2,160 mm, filter area: 23.75 m², suction capacity: 1,500 m³/h, Equipment: type plate available, HERDING brand dust extraction and welding fume extraction system. Self-cleaning filter, pneumatic, suitable for plasma, laser, abrasive blasting, grinding gypsum, cement, plastics, and all types of dry dust. The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. Highly efficient Jet-Pulse cleaning system with low compressed air consumption. Model: Delta Comp 1500-5/9 SB Fan power: 5.5 kW Capacity: 1500 m3/h Filtration area: 23.75 m2 Inlet diameter: 150 mm Height: 2.16 m Width: 1.05 m Depth: 1.92 m Lajdpszpxdkjfx Akwoh Weight: 1200 kg Stock number: 1158

Condition: new, Year of construction: 2026, The CORMAK ODL6K extraction and filtration system is a modern solution that provides safe working conditions for operators and effective protection of laser system components against contamination and damage. Filtration at a level of 99.9% removes harmful particles and fumes, guaranteeing clean air in the workplace. The ODL6K is distinguished by an automatic filter cleaning system, an efficient fan, and a compact, solid design that allows for easy integration with various cutting systems. An additional advantage is the ergonomic waste drawer, which allows for quick and convenient emptying of collected waste. This is a comprehensive solution that increases safety, improves work efficiency and extends the service life of laser systems. The ODL6K combines automatic filter cleaning with compressed air, an efficient fan generating high negative pressure and filtration at a level of 99.9% for particles of 0.3 μm thanks to the use of appropriate filters. The system is equipped with an ergonomic dirt drawer, which allows for quick and convenient removal of accumulated dust without the need for disassembly. Additionally, thanks to the modular design, it is possible to mount extraction nozzles on both the left and right side of the device, which allows for flexible adjustment of the installation to the layout of the production hall. ODL6K is a compact, efficient and reliable solution for any laser cutting system - increasing safety, comfort and work efficiency. The main functions of the exhaust gas extraction and filtration system in the laser processing process are: Removal and neutralization of laser smoke. Ensuring work safety at the laser station and in its immediate vicinity. Lajdpfxjwcd I Ro Akwoh Extending the service life of laser systems by keeping them clean and protecting important components from contamination. The most important advantages of the CORMAK ODL6K extraction system: The extraction system has automatic filter cleaning using compressed air. Under the influence of pressure, the filter is "shaken off", which effectively cleans the filter cartridge and thus extends its service life. Thanks to this, the system maintains its efficiency for a longer period of time. The filter element used in the system is imported and made of high-quality material. The Nano-type fireproof filter has high filtration efficiency, retaining particles of 0.3 μm in more than 99.9%. The large dust collection drawer allows convenient dust collection and cleaning, which makes the system easy to maintain. The motors used in the system are equipped with overload protection, thus ensuring a high level of protection and trouble-free operation. The specially developed high-performance fan wheel generates a large negative pressure, which allows effective removal of laser exhaust gas and ensures high airflow efficiency. The total purification efficiency of the system is 0.3 μm, and the efficiency is more than 99.9%, which shows the high efficiency of the exhaust in removing harmful particles from the air. In addition, it is characterized by a compact structure, which makes it easy to operate and maintain. Technical parameters Number of filter cartridges 6 Air flow 6000 m³/h Air pressure 3000 Pa Filtration efficiency 99.99% Filter size 350x660 mm Fan power 7.5 kW Inlet diameter 300 mm Weight 590 kg Dimensions (L x W x H) 1150 x 1950 x 2250 mm

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Kemper CleanAirTower - CleanAirTower room air purification Energy-efficient room ventilation based on the displacement ventilation principle for welding fumes in production halls Application area: - For production and storage halls with high dust loads - Workshops where local extraction is not possible - As a supplement to local extraction systems - Environments with changing sources of dust/fume Benefits/Features: - Effective energy capture through Pinball method and Tornado principle - Low risk from foreign objects - Reduced heating costs due to air recirculation and distribution - Long filter service life through optimized airflow - High safety due to dust disposal without contamination - Cost-effective installation, also retrofittable, as no ducting is required - New head element retrofittable to existing systems - Safe transport and easy installation via crane lugs - KEMPER-Cloud connection via mobile network Technical data: * max. volumetric flow: 6,000 m³/h * filter area: 60 m² * motor power: 5.5 kW * supply voltage: 3 x 400 V, 50 Hz * control voltage: 24 V DC Lajdpfx Akjwthbvowsh * rated current: 11.0 A * sound pressure level: 72 dB(A) * compressed air connection: 5 - 6 bar * dimensions (W x H): 1,172 x 3,622 mm * weight: approx. 666 kg

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Lodpexf Up Ijfx Akwoah

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, overall weight: 200 kg, input voltage: 400 V, filter area: 15 m², suction capacity: 1,100 m³/h, negative pressure: 3,200 Pa, input frequency: 50 Hz, hose length: 3,000 mm, Welding fume extractor, dust collector, self-cleaning filter, pneumatic, vacuum KEMPER. Lajdpfxszdqv Us Akwjh For welding, grinding, and all types of dry dust. Self-cleaning welding fume filter with non-polluting dust collection. The mobile cartridge filter KEMPER MaxiFil Clean is designed for continuous operation to filter welding fumes and dust with high concentrations. Suitable for use in welding carbon steels, low-alloy steels, high-alloy steels, and aluminum using any welding method. Economical in operation due to the long service life of the filter cartridge. Parameters: Capacity - 1100 m3/h Maximum vacuum - 3200 Pa Three-phase fan with a power of 1.5 kW Filtration area - 15 m2 Year of manufacture - 2015 Patron filter cartridge with PTFE membrane Filtration efficiency - > 99.97% Built-in delay timer in start-stop mode. When connected to a start-stop sensor (optional), the delay time for fume extraction after the welding process is completed can be set to a value of 5-60 seconds. Stock number - 1145

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, overall weight: 2,000 kg, input voltage: 400 V, total width: 1,650 mm, total length: 2,200 mm, total height: 4,250 mm, filter area: 286 m², suction capacity: 18,000 m³/h, negative pressure: 3,500 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-operated for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is pneumatically cleaned with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 16 Year of manufacture: 2010 Laodpfx Aez Ayv Uokwjh Cartridge filter elements, oval - DFO ULTRA-WEB FR - 16 pcs Filtration area: 286 m2 Fan power: 18.5 Kw Fan model: FR 501 Built-in frequency converter. Remote monitoring of the device is possible thanks to Donaldson's iCue technology. Capacity up to 18000 m3/h Inlet diameter: 630 mm Noise silencer included. New filter elements, custom-made according to the device's intended use, are also available on request. Stock number: 1155

Condition: used, Year of construction: 1999, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, input voltage: 400 V, filter area: 286 m², suction capacity: 7,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit, self-cleaning filter, pneumatic, vacuum-operated for continuous operation, from the renowned Donaldson Torit brand. Laedpfx Aez Hkgiskweh Suitable for plasma cutting, laser cutting, sandblasting, soda blasting, welding, and for all types of dry dust. The fan is located behind the filter on the clean air side, minimizing the risk of explosion. The filter cartridges are pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. Fan power: 9 kW Flow rate: 7000 m3/h Inlet diameter: 350 mm Number of filter cartridges: 12 Filtration area: 286.8 m2 Year of manufacture: 1999 Dimensions: Width: 2.10 m Depth: 2.50 m Height: 3.37 m Base: 2.11 m x 1.52 m Stock number: 1171

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 14 kg, warranty duration: 12 months, input voltage: 230 V, total length: 420 mm, total height: 450 mm, total width: 245 mm, volume flow: 420 m³/h, Equipment: chassis, low noise, Fume extraction with remote control and suction hose Air inlet interface ρm flange Max. Power 300W Air velocity 24/ms Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M System shear flow approx. 420m³/h Lajdpfxexrgl Io Akwoh Dimensions L420 x B245 x H450 Weight 14.0kg Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. - Extraction unit for use in the workplace - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower - Quick, easy and stable installation thanks to Easy-Click system

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: Lasdpfjnyhvqsx Akwoh 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.

Condition: used, Welding fume filter, welding fume extraction, flexible extraction arm Laedpfx Aok Aubqskwoh -Manufacturer: MIG O MAT, welding fume extraction -Extraction fan: Motor Elmot 1.1 kW -Extraction arm: length 5700 mm -Tube: Ø 160 mm / inner Ø 145 mm, see photos -Transport dimension: 2900/100/H470 mm -Weight: 165.5 kg