Used Frequency Former for sale (6,131)

Condition: used, Heraeus Type: SUT 6060 Hfodpfx Ajzdti Djp Eon Drying cabinet / hot air sterilizer Manufacturer / Type: Heraeus SUT 6060 Features: Temperature range: 250°C Net volume: 52 liters Weight (empty): 53 kg Internal dimensions: Depth 339 mm, Width 403 mm, Height 380 mm External dimensions: Depth 535 mm, Width 744 mm, Height 552 mm Rated voltage 230V, Rated frequency 50/60Hz, Rated current 7.1 A, Rated power 1.64 kW Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Laserline Type: LPC03 Lascon laser system with Lascon controller LPC03 Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +/- 10% Laser power: 550 W Supply voltage 100-264V +/- 10% Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Laser class 1 Type: LDM 500-60 Lascon controller LPC03 The LPC03 has the processing power of a complete PC in a very small space. Instead of a hard drive, a removable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is therefore ideally suited Hodpfx Aezdqkrsp Esfn for tasks in the field of measurement, control and regulation in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also provides space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180 mm Drives: none Storage medium: removable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212 mm x 80 mm x 250 mm (height x width x depth) Protection class: Front: IP40 Environment: 15°C - 40°C Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, GRIESER Type: GFD 11 LST Product: Grieser Laboratory Stand Dissolver Intended Use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can range from thin to pasty. Machine Design: The laboratory stand dissolver consists essentially of the machine stand, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the collet chuck, and the control cabinet (non-Ex) with control and compact controller. In the working position, the container (customer-supplied) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed control via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is carried out by switching on the lifting motor. This runs only as long as the push buttons (two-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains in any desired position. Lowering the mixing tool drive Hjdozdtflepfx Ap Eefn To lower the arm, the corresponding buttons (two-hand safety circuit DOWN-DOWN) on the control panel are pressed. Mixing tool change The mixing tool shaft is provided with an M8 connection thread. Depending on the requirement, the mixing tool (stirring blade, customer-supplied) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of construction: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 min-1 via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) customer-supplied Mixing tool: Stirring blade, customer-supplied Control panel / display The machine is operated primarily via the compact PLC controller "Vision 560-T25B". Safety-relevant functions such as disconnection from the mains via the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber are excluded. The control panel consists of an illuminated LCD display and film-covered tactile buttons. The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. The individual menu screens can be switched through using the up and down buttons. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN, Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick/Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from an industrial setting and has been professionally operated. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated force: 10 kN Type of test: Tensile and compression test Technical Performance Data: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnenn (nominal speed) Displacement resolution: 0.038 µm Positioning repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Data transfer to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Working space width: 440 mm Working space height (bottom): 1,050 mm Weight with typical components: approx. 160 kg Electrical Data: Adjustable mains voltage: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current consumption at 230 V: approx. 3.4 A Fuse rating: ≤ 16 A Connection: 1L / PE / N Documented test and calibration records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Temperature during testing: 23.3 °C Displacement measurement system: Incremental encoder (rotary) Force sensor installed 29.01.2014 Force sensor: Xforce HP Module: DCSC Calibration at Zwick Ulm 28.08.2013 Force sensor: Xforce P Module: DCSC Rotation before test series: 120° testXpert control system Documented service and calibration records are available. Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measuring module Force sensor Xforce P / Xforce HP Incremental encoder (rotary displacement measurement system) ISO 7500-1 compliant force measurement Installed under the traverse Important Note: “The table shown in the photos is not part of the sale.” Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force sensor DCSC module Specimens / Grips Adapters and holders Tools Documentation folder with documents Scope of delivery as shown in the pictures. (Changes and errors in the technical data are subject to change!) Hedszizrkjpfx Ap Ejfn We will be happy to answer any further questions you may have by telephone.

Condition: used, Binder BINDER KB 720 Cooling Incubator with P Plus Package – Battery Test Chamber, EUCAR 5, CO₂ Extinguishing System Device description: For sale is a BINDER KB 720 (E6) cooling incubator, manufactured in 2022, equipped with the extended safety and performance test package "P Plus". This device is not a standard laboratory incubator, but a high-quality safety test chamber, specifically designed for aging, performance, and safety tests of lithium-ion energy storage systems. Special added value: The device is designed to safely detect, monitor, and contain critical battery events – up to EUCAR hazard level 5 (fire/flames, no explosion). What can the device do specifically? (Point 2 – Performance & Application) Performing aging tests on lithium-ion cells Performance tests (charge/discharge cycles at varying temperatures) Temperature endurance tests and temperature change tests Tests of unpowered and cyclically powered cells Reproducible, precise temperature control throughout the usable space Safe execution of tests under realistic thermal conditions Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: Battery & cell manufacturers Research and development laboratories Testing laboratories & safety testing Automotive / e-mobility / energy storage The P Plus package turns the KB 720 into a genuine battery safety test chamber: Integrated safety functions: Automatic & manual CO₂ fire extinguishing system Smoke detector with optical & audible alarm Mechanical double-door locking system (secure containment) Spark protection in the interior Exhaust port with reversible overpressure valve Connections for external inertization (e.g., nitrogen) Emergency stop / manual triggering of the extinguishing system Feedthrough openings for charging and measuring cables Result: The device is designed for tests on lithium-ion cells up to EUCAR hazard level 5, where fire or flames may occur without resulting in an explosion or uncontrolled propagation. Not an abuse or destruction test device, but a safe, standard-compliant test chamber for real operating and failure scenarios. Technical key data: Temperature range: -10 °C to +100 °C Interior volume: approx. 698 liters Inserts: 4 x stainless steel Max. load per insert: 45 kg Max. total load: 100 kg Electrical data: Mains connection: 200–240 V AC Frequency: 50 / 60 Hz Phase: 1-phase Power consumption: approx. 2.1 kW Fuse rating: 16 A Refrigerant: R134a Protection class: IP 20 Dimensions & weight: External (W × H × D): approx. 1250 × 1950 × 900 mm Internal (W × H × D): approx. 970 × 1250 × 576 mm In short – why this device is special genuine battery safety test chamber suitable for EUCAR hazard level 5 integrated CO₂ extinguishing system Hfedpfszizr Rjx Ap Eon large chamber (≈700 l) high market & resale value Weight: approx. 285–300 kg Documents & Downloads Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Material Testing Machine, 20 kN, Tensile & Compression Testing, testXpert III For sale is a high-quality Zwick / Roell material testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. The machine is controlled via a PC with Zwick/Roell testXpert III software (storage medium and documentation available). Technical Data: Nominal testing force: 20 kN Hedpfezimgtsx Ap Eofn Testing direction: Tensile & Compression Power connection: 230 V / 50–60 Hz / 1-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical Data (from documents & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: Tensile & Compression Max. testing frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight Overall height: approx. 1,545 – 2,114 mm (depending on the crosshead position) Overall width: approx. 856 mm Overall depth: approx. 650 mm Working space width: 440 mm Weight: approx. 150 kg (basic unit) approx. 180 kg with typical equipment Electrical Data Power connection: 230 V AC Phases: 1-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Socket: Schuko (CEE 7) Measuring & Control Electronics Internal measurement value acquisition: 500 Hz Data transmission to PC: 10–100 Hz adjustable Interface: RS232 (COM) Protection class for electronics housing: IP32 Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of supply: (See picture) Zwick / Roell material testing machine (20 kN) Electronics unit PC workstation (monitor, PC condition see pictures) 2 measuring modules (Delock units) Zwick/Roell testXpert III software (storage medium) Original operating and technical documentation Various connection and linking cables (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Arburg Type: Arburg Freeformer 300-3X PC has been renewed and upgraded Additive manufacturing of complex functional components With high-temperature option The new, larger Freeformer 300-3X processes three components in ARBURG Kunststoff-Freiformen (AKF) and, for the first time worldwide, enables the industrial additive manufacturing of complex functional components in a durable hard-soft composite with a support structure. The designation 300 indicates the available component carrier area in square centimeters. The build space now offers 50 percent more space for parts with dimensions of up to 234 x 134 x 230 millimeters compared to the Freeformer 200-3X. Hfodpszd Tiwefx Ap Een "3X" indicates the three axes of the component carrier that can move in the x, y, and z directions. For Additive Manufacturing Manufacturer: Arburg Build volume [cm³]: 7211 Build space X [mm]: 234 Build space Y [mm]: 134 Build space Z [mm]: 230 Printing material: ABS, PC, PLA Class: Industrial Operating voltage: 400 / 400 V 3〜50 Hz Control voltage: 24V= Total rated current: 11 A Total connection: 7.8 kW Year of manufacture: 2019, operating time: 1483 hours Weight: 1593 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Heraeus Type: VT 6025 Heraeus Vacutherm vacuum drying oven Specification, heating jacket VT 6025 Temperature (metric): 200 °C Dimensions, internal (W x D x H): 300 x 307 x 275 mm Hodozgbqzepfx Ap Ejfn Dimensions, external (W x D x H): 480 x 450 x 600 mm Electrical requirements: 230 V, 50/60 Hz Frequency: 50/60 Hz Capacity (metric): 25 l Type of heating jacket: without inert gas connection Voltage: 230 V, 1.3 kW, 5.9 A Weight: 58 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Thermo Fisher ARCTIC A25 Technical data: Hfjdpfszgcgdsx Ap Eon Controller type: SC150 Capacity: 12 l Communication: RS232, RS485, Ethernet/LAN, analog I/O Cooling capacity: 500 W Flow rate: 17 l/min Pump type: Pressure pump, suction pump Temperature range: -25°C to +100°C Max. pressure: 300 mbar Temperature stability: 0.02°C Dimensions (L x W x H): 48.3 x 27.3 x 71.1 cm Length: 48.3 cm Internal length: 18.4 cm Width: 27.3 cm Internal width: 17.3 cm Height: 71.1 cm Internal depth: 20.4 cm Weight: 36.1 kg Electrical requirements: 230 V 50 Hz Voltage: 230 V Frequency: 50 Hz Condition: used Scope of delivery: (See images as shown) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Liebisch Type: S 1000 A-TR / 42016211 Chamber-type test equipment with a 1000-liter test chamber volume for salt spray tests. Constamatic® TR This series includes automatically controlled chamber-type test equipment of type A-TR. The device's internal control is operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical data: Device type: S 1000 A-TR External dimensions of the housing: (W x D x H in mm) 2600 x 1120 x 1210 Internal dimensions of the test chamber: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. load of the sample holder: 10 kg / level 10 kg Operating voltage: 230 V +6/-10% Connected load S: 2700 W Control range humidity S: up to / 70°C Control range test chamber K: up to / 50°C Control range test chamber S: up to / 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Hedpezh Ht Rsfx Ap Eefn Over-temperature protection: yes Volume of test chamber: 1000 liters Reservoir for test solution: approx. / 150 liters Test solution consumption / hour: approx. / 0.7 – 1.0 liters Water filling, base pan KON: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data!) We would be happy to answer any further questions you may have over the phone.

Condition: used, ZEISS Multisensory CNC Coordinate Measuring Machine O-INSPECT 442 Professional coordinate measuring machine for optical and tactile precision measurements in industry, research, and quality assurance. For sale is a used multisensory coordinate measuring machine from the manufacturer Carl Zeiss IMT GmbH. The ZEISS O-INSPECT 442 combines highly precise optical and tactile measurement technology in a CNC coordinate measuring machine. The installed ZEISS CALYPSO measurement software enables convenient evaluation of measurement data as well as the display of the actual state, target profile, and deviations. The system is ideal for quality assurance, toolmaking, precision engineering, medical technology, as well as research and development. Technical data: Manufacturer: Carl Zeiss IMT GmbH Model: O-INSPECT 442 Type: Coordinate measuring machine Measuring range X: 400 mm Measuring range Y: 400 mm Measuring range Z: 200 mm Max. workpiece weight: 20 kg Noise level: < 70 dBA Measurement system: Multisensory measurement system Optical and tactile measurement CFS measuring head system CALYPSO measurement software CNC-controlled measurement sequences Electrical data: Supply voltage: 100 / 110 / 120 / 125 / 230 / 240 V AC (±10 %) Current type: 1 / N / PE Frequency: 50–60 Hz (±3.5 %) Power consumption: max. 1500 VA Dimensions: Width: 1,055 mm Depth: 1,351 mm Height: 1,770 mm Weight: Coordinate measuring machine: approx. 800 kg Hjdpfezii Dhox Ap Eefn Max. workpiece weight: 20 kg Equipment: Integrated control Control panel Computer with peripherals ZEISS CALYPSO Software 5.2 Documentation CFS measuring head system Reference probe Calibration standard Calibration template Applications: Coordinate measuring technology Optical measuring technology Tactile measuring technology Quality assurance Toolmaking Precision engineering Medical technology Research and development Scope of delivery: ZEISS O-INSPECT 442 coordinate measuring machine Integrated control Control panel Computer with peripherals ZEISS CALYPSO Software 5.2 Documentation Measuring head system Reference probe Calibration standard Calibration template Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos or other items not explicitly mentioned are not included in the sale. Due to its size and weight, shipping is possible via a freight forwarder. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, TRUMPF   TRUMPF TruDisk 4002 (4 C) High-performance solid-state disk laser with up to 4 kW   Type: TruDisk 4002 (4 C)   The TruDisk 4002 is a powerful, energy-efficient, and modular laser solution – ideal for industrial manufacturing environments with high demands on quality, precision, and automation. The combination of high power, excellent beam quality, and Smart Factory features makes it particularly attractive for modern production lines.   System type: TruDisk 4002 (4C) Hfsdpezii Nqjfx Ap Esn Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: May 2012 Drawing number: 20-10-02-A3*   No further testing was carried out in-house. The operating hours could not be read out. The laser ran perfectly until the end.   Technical features:   Power & wavelength: 80–4000 W at 1030 nm Beam quality (BPP): typically 2 mm·mrad (up to 25 mm·mrad, depending on the configuration) Modular & compact: footprint < 1 m², modular design simplifies maintenance/service Efficient energy & cooling systems: Energy-saving modes, active power factor correction, pulse function to reduce consumption Flexible cooling: integrated heat exchanger (5–28 °C), optionally with compressor (up to 38 °C inlet temperature) Reflection-resistant: special resonator design is also suitable for highly reflective metals Industry 4.0 capable: extensive sensors + data interfaces for condition monitoring, OPC-UA, predictive maintenance   Possible applications:   Scanner & hybrid welding (e.g., body construction, shipbuilding) High-speed cutting, including on reflective metals Flame cutting & surface treatment Cladding, hardening, deep welding with high precision requirements   Technical data:   Supply voltage: 380 V (-10 %) to 460 V (+10 %), 3AC + PE Frequency: 50 – 60 Hz Power consumption: 23 kW / 25 kVA Rated current: 34 A at 400 V Degree of protection: IP 54 Short-circuit strength: Icn / SCCR 50 kA   Weight: 850 kg   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, EA Elektro Automatik Type: EA-EL 9080-170 B Electronic DC load, USB / Analog / Master-Slave, Programmable, 80V, 170A, 2.4kW Technical data: Mains voltage 90...264 V AC Mains connection type Socket Mains frequency 45...65 Hz Mains fuse T 6.3 Power consumption Max. 90 W Leakage current < 3.5 mA DC input Input voltage 80 V Input power 2400 W Input current 170 A Overvoltage protection range 0...1.03 * UNom Overcurrent protection range 0...1.1 * INom Overpower protection range 0...1.1 * PMax Maximum permissible input voltage 88 V Min. input voltage for IMax Approx. 2.2 V Temperature coefficient of the setpoint values Δ / K Current / Voltage: 30 ppm Voltage regulation Setting range 0...81.6 V Stability at ΔI < 0.05% Accuracy (at 23 ± 5°C) ≤ 0.1% UNom Display: Accuracy ≤ 0.1% UNom Remote sensing compensation Max. 5% UNom Current regulation Setting range 0...173.4 A Stability at ΔU < 0.1% INom Accuracy (at 23 ± 5°C) ≤ 0.2% INom Display: Accuracy ≤ 0.1% INom Rise time 10...90% INom < 23 μs Fall time 90...10% INom < 46 μs Power regulation Setting range 0…2428 W Accuracy (at 23 ± 5°C) < 0.5% PMax Display: Accuracy ≤ 0.2% PMax Resistance regulation Setting range 0.04…15.3 Ω Accuracy (at 23 ± 5°C) ≤ 1% of the resistance end value + 0.3% of INom Display: Accuracy Included in the accuracy of the setpoint value EL 9080-170 B: Analog interface: Setpoint inputs U, I, P, R Actual value outputs U, I Control signals DC on/off, Remote control on/off, R-mode on/off Status signals CV, OVP, OCP, OPP, OT, PF, DC on/off Galvanic isolation to the device Max. 400 V DC Sampling rate Setpoint inputs 500 Hz Isolation: Input (DC) to housing DC-minus: permanently max. ±400 V DC-Plus: permanently max. ±400 V + max. input voltage Input (AC) to Input (DC) Max. 2500 V, briefly Climate: Cooling method Temperature-controlled fan Ambient temperature 0...50 °C Storage temperature -20...70 °C Digital interfaces Built-in 1x USB-B for communication, 1x USB-A for functions, 1x Master-Slave bus Slot for digital modules Optional: CAN, CANopen, Profibus, Profinet, RS232, Ethernet, ModBus TCP, EtherCAT Galvanic isolation to the device Max. 400 V DC Connections: Rear Share-Bus, DC input, AC input, Sense, Analog interface, USB-B, Master-Slave bus, Interface module slot Front USB-A Dimensions: Housing (W x H x D) 19" x 2 U x 464 mm Total (W x H x D) 483 mm x 88 mm x 538 mm Standards EN 61010-1:2007-11, EN 61000-6-2:2005, EN 61000-6-3:2006 Class B Weight ≈ 11 kg Documents & Downloads Datasheet: Operating manual Hfjdpfx Apsuv Euds Ejn Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, KUKA Type: KR 10 R900 sixx / KRC4 KUKA industrial robot complete system Hfodey Dt D Depfx Ap Ejn Robot: KR 10 R900 sixx Controller: KRC4 including KUKA smartPAD, cable set and accessories For sale is a KUKA industrial robot as a complete system from a commercial inventory. The system is ideally suited for automation tasks in industry, laboratories, assembly, handling, pick-and-place applications, testing tasks, and general robot applications. The 6-axis robot is designed for precise and rapid movements and can be used for gripping, positioning, feeding, moving, and processing components. The system offered consists of a robot arm, KRC4 controller, smartPAD, cables, and other accessories as shown in the pictures. Technical data: Manufacturer: KUKA Roboter GmbH Robot type: KR 10 R900 sixx Article No.: 10016515 Serial number: 500874 Payload: 10 kg Reach: 901 mm Axes: 6 Robot weight: 52 kg Controller: KRC4 Article No.: 11019802 Serial number: 224377 Controller weight: 33 kg Controller connection voltage: 1 x 230 V Mains frequency: 50/60 Hz Full load current: 12 A Mains fuse: 16 A Total system weight (approx.): 90–110 kg Robot dimensions (approx.): Reach 901 mm Controller dimensions (approx.): compact KRC4 design Software / Display according to system: KRC SR version: V8.2.3 HMI version: 8.2.0.4 B22 Base system: KSS 8.2.21_SR Installed options according to display: ExpertTech 3.1.1 Gripper-&-SpotTech 3.0.5 OrangeApps.MqttClient 2.2.12 Profinet KRC-Nexxt 2.2.7 RemoteService 1.0.2 UserTech 3.1.4 Description / Functions: The robot can be used for handling and automation processes, e.g. for gripping, transferring, feeding, positioning or processing workpieces. The 6 axes enable flexible movement in space. The compact design and the reach of 901 mm make the system particularly interesting for confined working areas and automated production cells. Total system weight (including controller and accessories, approx.): 90 – 110 kg Condition: used visually with typical signs of wear the screen and system information can be seen in the photos the visual condition can be seen in the pictures Scope of delivery: (See picture) KUKA KR 10 R900 sixx robot arm KUKA KRC4 controller KUKA smartPAD Connection and linking cables other accessories as shown in the pictures Important: The images are the only basis for the scope of delivery. "The table shown in the photos is not part of the sale." Commercial sale (Changes and errors in the technical data, information are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: used, Thermo Fisher Scientific Thermo Fisher Scientific Flash 2000 CHNS O Analyzer with 2 x AI AS 1310 Autosamplers For sale is a used Thermo Fisher Scientific Flash 2000 elemental analyzer. The unit is equipped with two AI AS 1310 autosamplers. It is designed for automated laboratory operation. The system is used for elemental analysis in the laboratory. Sample introduction is performed via the installed autosamplers. This enables continuous and automated operation. Equipment and features: Thermo Fisher Scientific Flash 2000 CHNS O Analyzer 2 x AI AS 1310 Autosamplers Front display with status fields for operating states Gas connections for He and O2 RS232 interfaces and other device interfaces Connections for autosamplers and additional modules Power connection 230 V Accessories and parts as shown in the pictures Technical data: Manufacturer: Thermo Fisher Scientific Model: Flash 2000 Voltage: 230 V AC Frequency: 50-60 Hz Fuse: 2 x 6 A Power: 1400 VA Autosampler: Model: AI AS 1310 Supply: 24 V DC Power: 46 W per unit Serial numbers: 420126446 and 420126487 Dimensions (approx.): Main unit: Width approx. 55 to 60 cm Depth approx. 55 to 65 cm Height approx. 50 to 60 cm Overall width with 2 autosamplers approx. 100 to 120 cm Weight (approx.): Main unit: approx. 45 to 60 kg Autosampler: approx. 8 to 12 kg each Total: approx. 60 to 80 kg Condition: Used, with typical signs of wear and tear due to age and use. The condition corresponds to the pictures. Scope of delivery: Flash 2000 Analyzer 2 x Autosamplers Accessories and cables as shown in the pictures Important note: All information has been provided to the best of our knowledge, based on the pictures, nameplates, and manufacturer information. The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping is possible. Subject to changes, errors and prior sale. Hedpey D Sqvefx Ap Ejfn We will be happy to answer any further questions by phone.

Condition: used, SincoTec Type: Exciting Mot Hjdpfxozii Awo Ap Esfn Resonance test bench POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance test bench is designed as a dual-mass vibrator. It consists of a vibration head, which is excited via an asynchronous motor with frequency control and an eccentric motor. The vibration head is located in the upper part of the machine and generates the dynamic amplitude. The vibration head is supported on the upper traverse via pre-tensioned coil springs and is guided centrally. The center load drive is located in the lower part of the machine and applies the static preload with the aid of a geared motor via a spindle drive. The test chamber is located above the mounting table and is bounded upwards by the adjustable traverse. The control of the test bench is carried out by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the test bench: Overall height of the test bench 1840 to 2240 mm Height of the machine table 1030 mm Width of the test bench 800 mm Depth of the test bench 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. class 1 (according to DIN EN 10002-3) Weight of the test bench approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAI 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (right-rotating field) Connection plug CEE socket, 5-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase with PE conductor and protective earth, right-rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent interference Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Protective earth Ground resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Atlas Xenon Weather-Ometer / Weathering Test Device Atlas Ci3000+ Xenon Weather-Ometer Xenon test device for artificial weathering and light aging For sale is a used Xenon Weather-Ometer from Atlas Material Testing Technology LLC. The device is suitable for weathering tests, light aging, material testing, quality control, research and development, as well as aging tests for plastics, paints, coatings, and materials. Technical data Manufacturer: Atlas Material Testing Technology LLC Type: Ci3000+ Model: Ci3000+ Weather-Ometer Device type: Xenon Weather-Ometer / Weathering Test Device Year of manufacture: 12/2010 Light source: Xenon arc lamp Lamp rated power: 4,500 W Operating range Xenon lamp: 1,700 – 4,500 W Device model according to display: Ci3000+ W Hedpfxjzf D Rno Ap Ejfn Sample sensor 1: Black standard Sample sensor 2: Black panel Light sensor 1: CI 300 – 400 nm Light sensor 2: CI 420 nm Mains connection: 220 / 380 V Frequency: 50 Hz Connection type: 3/N/PE Rated current: 50 A Power consumption: 9.5 kW Control voltage: 24 VDC Compressed air supply required Operating pressure: 80 – 100 PSI (552 – 689 kPa) Compressed air consumption: approx. 4 CFM (0.11 m³/min) Dimensions: approx. 950 x 730 x 1830 mm (W x D x H) Required footprint: approx. 1050 x 2030 mm (W x D) Weight: approx. 404 kg Minimum distance exhaust hood: approx. 102 mm to 152 mm Equipment Touchscreen control panel Xenon burner Test chamber with sample rack Black standard sensor Black panel sensor CI 300 – 400 nm light sensor CI 420 nm light sensor Water-cooled lamp system Exhaust connection Interface connections Integrated humidification system Documentation / Documents as shown in the pictures Accessories / Documents Atlas Weathering Testing Guidebook Atlas Weather-Ometer Auxiliary Filter Lantern Kit Instructions Documentation as shown in the pictures Accessories as shown in the pictures Areas of application Artificial weathering Light aging testing UV and Xenon testing Material testing Plastic testing Paint and coating testing Colors and pigments Textiles Packaging Automotive industry Construction and materials testing Quality assurance Research and development Condition Used Good optical condition Optical condition as shown in the pictures Scope of delivery 1x Atlas Ci3000+ Xenon Weather-Ometer Available accessories as shown in the pictures Available documentation as shown in the pictures The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping or freight shipping possible. (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Anton Paar Hedpfxjzicwue Ap Eefn Modular Rotational Rheometer / Precision Rheometer Software: Anton Paar Rheoplus (original CD included) Device driver and license diskette available Anton Paar Physica MCR 301 Professional rotational and oscillatory rheometer for research, development, quality control and material testing For sale is a used rotational rheometer from the manufacturer Anton Paar. The device is suitable for highly precise rheological characterization of liquids, polymers, dispersions, emulsions, pastes, gels and other materials. The MCR 301 is one of the professional laboratory instruments for research, development, quality assurance and industrial material testing. Technical data: Manufacturer: Anton Paar GmbH Type: Physica MCR 301 Device type: Modular rotational rheometer Measuring principle: Rotational and oscillatory rheometer Drive: Air-bearing EC servo motor (Air Bearing Technology) Normal force measurement integrated Modular measuring system for different measuring geometries Power connection: AC 100–240 V Mains frequency: 50–60 Hz Power consumption: 850 W PC connection: RS-232 / Ethernet (depending on the configuration) Software: Anton Paar Rheoplus Operation via LCD display and membrane keypad Environmental conditions: Operating temperature: 15 °C to 35 °C Recommended ambient temperature: 23 °C ±3 °C Storage temperature: -20 °C to +50 °C Relative humidity: 20–60 % (non-condensing) Dimensions: approx. 610 × 420 × 670 mm (L × W × H) Weight: approx. 48 kg Measurement possibilities: Rotational measurements Oscillatory measurements Viscosity measurements Flow curves Shear stress Creep tests Relaxation measurements Amplitude sweeps Frequency sweeps Material characterization Equipment: Air-bearing precision drive LCD display with control panel Electronic control Measuring head Measuring platform PC interfaces Rheoplus software CD Original documentation Operating manual Diskette with software data Connection cable Accessories as shown in the pictures Application areas: Research & Development Laboratory Quality assurance Chemical industry Pharmaceutical industry Cosmetics industry Food industry Polymer technology Materials science Universities Testing laboratories Scope of delivery: Anton Paar Physica MCR 301 Original Rheoplus software CD Original operating manual Documentation folder Diskette Connection cable Other accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age are present. Nameplate is present. The table shown in the photos or other items not explicitly mentioned are not included in the sale. Shipping by freight forwarder or parcel service is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone or email.

Condition: new, machine/vehicle number: FGWPEP38VJSB13442, fuel type: diesel, motor manufacturer: Perkins 1103A-33TG2, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 769 kg Functional Generator capacity: 55 kVA Dimensions of cargo space: 168 x 76 x 133 cm CE mark: yes Other information Fuel consumption: 8,7 L/Hour at 75% Load Prime Generator: FGWilson FGL20070 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 145 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel Hfedpfx Ajzyld Esp Een - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames

Condition: new, fuel type: diesel, motor manufacturer: Perkins 1103A-33G1, General information Hfsdpfozyldlsx Ap Esn Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 730 kg Functional Generator capacity: 33 kVA Dimensions of cargo space: 157 x 76 x 123 cm CE mark: yes Other information Fuel consumption: 5.2 Liter/Hour at 75% Load Prime Generator: FG Wilson FGL20030 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 71 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames

Condition: new, machine/vehicle number: 2016192024, fuel type: diesel, motor manufacturer: Volvo TWD1644GE, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 5.259 kg Functional Generator capacity: 715 kVA Dimensions of cargo space: 390 x 170 x 230 cm CE mark: yes Other information Fuel consumption: 94 Liter / Hour at 75% Load Generator: Stamford S4L1D-E41 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 897 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel Hfedszmlpzopfx Ap Esn - Tank

Condition: new, machine/vehicle number: 20260202003, fuel type: diesel, motor manufacturer: Perkins 4008TAG3, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 12.270 kg Hfsdpfx Ajzkpmrjp Ejn Functional Generator capacity: 1.250 kVA Dimensions of cargo space: 606 x 244 x 290 cm CE mark: yes Other information Fuel consumption: 188 Liter / Hour at 75% Load Generator: Leroy Somer LSA 50.2 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1460 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, machine/vehicle number: 20260303021, fuel type: diesel, motor manufacturer: Perkins 1103A-33TG2, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 1.195 kg Functional Generator capacity: 66 kVA Dimensions of cargo space: 229 x 95 x 125 cm CE mark: yes Other information Fuel consumption: 10.8 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A42H Frequency: 50 Hfedpjznhhijfx Ap Een Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 87 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, fuel type: diesel, motor manufacturer: Perkins 2506A-E15TAG1, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 3.661 kg Functional Generator capacity: 500 kVA Dimensions of cargo space: 380 x 113 x 222 cm CE mark: yes Other information Fuel consumption: 69.6 L/Hout at 75% Load Prime Generator: FG Wilson FG29A360 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 888 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames Hfodpozyla Tefx Ap Een

Condition: new, fuel type: diesel, motor manufacturer: Perkins 2506A-E15TAG2, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 3.699 kg Functional Generator capacity: 550 kVA Dimensions of cargo space: 380 x 113 x 222 cm CE mark: yes Other information Fuel consumption: 73,6 L/Hout at 75% Load Prime Generator: FG Wilson FG29A400 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 888 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank = Remarks = Hedpozylbwefx Ap Ejfn The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames