Used Form-Attic for sale (6,278)

Year of construction: 2003, condition: used, Manufacturer: GEA Process Engineering S.A.S. Model: Batch Formula Coaxial Manufacturer’s description: Food preparation tank Year of manufacture: 2023 Identification numbers: 2023/01 – 2023/02 – 2023/03 Machine type: Preparation vessel with high-shear mixer at the bottom of the vessel and coaxial mixing + scrapers Application: Food product preparation Function: Batch mixing, dispersion and emulsification Set - Quantity available: 3 identical units - Storage condition: disassembled, stored on the Osertech premises Tank specifications - Volume: 5,000 L - Useful volume: 3,000 L - Pressure: -1 / 3 barG - Temperature: 0–100°C - Jacketed : -1/5 barG; 145°C - Maximum dry matter content: 80 per cent - Maximum viscosity: 50,000 cP - Maximum powder feed rate: 100 kg/min - Material of parts in contact with the product: AISI 316L stainless steel - Tank bottom: high-speed agitator - Domed lid with manhole secured by knobs - CIP/NEP cleaning balls Bwods Ahkz Uopfx Afmow - Inspection window - Pressure gauge at the top Vacuum pump - Manufacturer: Busch - Model: LX 0330 C AM0 - Ultimate pressure: 33 mbar High-shear mixer - Rotor / stator - Power: 90 kW Coaxial agitation - Agitation unit manufacturer: PMS – Process Mixing Solutions - Scraper impeller with scrapers - Propeller shaft: 2 rows of propellers offset by 60° Gear motor 1 - Power: 11 kW at 1,465 rpm - Output speed: 21 rpm Gear motor 2 - Power: 9.2 kW at 1,470 rpm - Output speed: 53 rpm Requires a new electrical box (power/control). This request may be subject to a separate quotation.

Condition: good (used), Year of construction: 2000, - *Make / Model: BASKET RQG 18* - Italian manufacturer, Reggio Emilia - Spider lift - *Year: 2000* - - *Working height: 18 meters* - *Type: Tracked spider lift + hydraulic stabilizers* - *Weight: 2,800 kg* - Can pass through an 80cm doorway with the basket removed - *Engine: 8.43 kW* - Bi-fuel (electric motor 380V, visible in blue + internal combustion engine) Bwodpfx Afsz Dcb Tomow - *Basket: 200 kg max / 2 people / 40 kg tools* - *Basket dimensions: 1.2m x 0.7m - 90° rotation* - *Outreach: ∼8.50m* - *Safety features:* 4 stabilizers with load sensors, 3° max tilt control, anemometer 12 m/s max, dual control station (base + basket) - *Tracks:* Rubber - hydraulic widening - *Condition:* As is, functional, ideal for cleaning / painting / rental. Basket needs cleaning / painting required.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Complete P20 & P30 HVAC Duct Flange Profile Roll Forming Lines with Butyl Sealant System For sale is a complete set of two professional roll forming lines for the production of P20 and P30 flange profiles, used in the manufacturing of rectangular HVAC ducts and fittings. The set includes: - P20 flange profile production line - P30 flange profile production line Both machines are equipped with an integrated butyl sealant application system. Depending on production requirements, the profiles can be manufactured with or without factory-applied butyl sealant. This provides full flexibility and allows the finished profiles to be adapted to different duct manufacturing technologies and customer requirements. The machines perform the complete production process – from coil decoiling, through multi-stage roll forming, to automatic cutting of the finished profile to the required length. Bwsdpfx Afszx Rz Homew Technical highlights - 18 roll forming stations - Automatic PLC-controlled cutting system - Production speed up to 9 m/min without sealant application - Production speed up to 5 m/min with butyl sealant application - Integrated butyl sealant application system - Complete production lines for P20 and P30 profiles Both machines are in very good technical condition. Since new, they have been used exclusively for the production needs of our own HVAC duct manufacturing facility. They have not been used for continuous mass production of profiles for commercial sale, therefore their overall level of utilisation is relatively low. Both production lines are fully operational, properly adjusted, tested and ready for immediate production. The machines are offered as a complete P20 + P30 set, allowing the buyer to establish in-house production of the two main flange profile sizes commonly used in the manufacturing of rectangular HVAC ducts and fittings. Relocation and commissioning support We can provide technical assistance with dismantling and relocation of the machines. We can also support the buyer with installation, adjustment, testing and commissioning at the new production facility, helping to ensure that both lines are properly set up and ready for production after relocation. The machines can be inspected while in operation, and production tests can be carried out prior to purchase. The indicated price is NET and VAT will be added where applicable.

Condition: used, all stainless steel electrically heated, max. 280°C adjustable speed 11 inspection/cleaning hatches belt width ± 1.000 mm net length ± 7.500 mm with belt wash system outside dimensions (l x w x h) : ± 9.500 mm x 1.600 mm x 2.400 mm Modular construction system Conveyor belt (opening 13 mm) total power 224 kW heating steam pressure: min 3 bar 10 kg/h per valve max. 3 bar 140 kg/h per valve cooking time min/max : 4min 36sec-120min Bsdps Aawxxjfx Afmsww steam injection (to heat up and to improve product yield)

Condition: ready for operation (used), Year of construction: 1997, input voltage: 415 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, operating speed: 7 mm/s, reverse speed: 50 mm/s, table length: 4,000 mm, throat depth: 500 mm, total length: 4,200 mm, total width: 1,800 mm, total height: 2,500 mm, overall weight: 11,000 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, CNC Megoform PB 40-130 Upstroke press brake. Serial Number 0622183 - 25/09/97 4000 mm (4 meters) working bed length. Tonnage / Capacity: 135-ton capacity Daylight (without tools) 340mm Side frame throat depth 500m Advance speed 37mm/s Working speed 7.5mm/s Return Speed 50mm/s Approx weight 11,000 Kgs Shipping dimensions L 4400mm , W 1800mm , H 2500mm Hurco auto bend 7 cnc controller X & R axis auto set , Z axis manual set Bwjdpjz Tdbhjfx Afmew Light guard

Condition: used, Year of construction: 2020, functionality: fully functional, load capacity per storage section: 500 kg, 2 completely identical mezzanines, same make and model: Mezzanine 1 – 17.55m x 17.88m = 313.79 m2 for €26,600 (excluding VAT) Mezzanine 2 – 17.55m x 17.88m = 313.79 m2 for €26,600 (excluding VAT) A 760 m2 mezzanine can be created if needed. Very nice industrial mezzanine from 2020, in excellent condition, completely disassembled, labeled, and palletized for easy and quick reassembly. Main features: Allowable load: 500 kg/m² Floor covering: very high-end grating Height under structure (under the steel frame): 4.50 m Height at floor level (on the steel frame): 5.00 m Column spacing: approximately 4.3 m x 5.8 m Condition and packaging: Entire set in very good condition Disassembly carefully carried out by professionals Bjdpfxoz Tdhns Afmsww All elements are numbered Labeling and assembly plans provided Entire set ready for reassembly Stored on pallets

Condition: used, functionality: fully functional, load capacity: 500 kg, 3 completely identical mezzanines, same make and model: Mezzanine 1 – 32.43m x 9.13m = 296.09m2, priced at €25,000 (excluding VAT) Mezzanine 2 – 32.43m x 8.5m = 275.65m2, priced at €23,400 (excluding VAT) Bodpjz Tdh Ujfx Afmjww Mezzanine 3 – 32.43m x 7.88m = 255.55m2, priced at €21,700 (excluding VAT) Completely dismantled, identified, and palletized for easy and quick reassembly. Main features: Admissible load: 500 kg/m² Wooden floor, 30 mm thick, in very good condition Height under structure (under beam): 3.00 m Column spacing: approximately 5.5 m x 4 m Column section: 120 x 120 mm Guardrails: approximately 40 linear meters per mezzanine Approximately 20 neon lights per mezzanine Access stairs, additional cost: €1,200 (excluding VAT) Condition and packaging: Entire set in very good condition Dismantling carried out carefully by professionals All elements are numbered Identification and assembly plans provided Entire set ready for reassembly Stored on pallets

Condition: used, continuous grilling line suitable for: roasting, cooking or browning electric heating 108 kW 3 x 400 V Bwsdpfx Afsz Udmmjmow with lower and upper belt : bottom and top grilling overall dimensions (l x w x h) : ± 5.150 x 1.800 x 2.250 mm net length 2.900 mm belt width 600 mm max 265 degrees gap height adjustable adjustable speed pneumatically controlled belt with belt wash system

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 3,859 h, power: 51 kW (69.34 HP), fuel type: diesel, first registration: 04/2010, color: red, motor manufacturer: VM, gearing type: hydrostat, Equipment: air conditioning, front power take-off, lighting, Tractor: + Reform-Werke + Metrac H7 X + First registered: 04/26/2010 + 3,859 operating hours + Front three-point linkage + Front and rear PTO + Front and rear hydraulics + Hydrostatic transmission + Joystick control + 4-cylinder VM diesel engine, 70 hp, 2970 cc + Switchable all-wheel drive + Locking differentials + Air conditioning + Steerable rear wheels + Hectare meter counter Bwedpjztq D Defx Afmow + Municipal vehicle, first owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: used, machine/vehicle number: 008701, Max working length: 2740 mm Max working width: 1240 mm Membrane: yes Bwjdpfozq Urtsx Afmow No of positions for the rolls: 2 No of work tables: 1

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,300 mm, total length: 9,000 mm, total height: 2,300 mm, overall weight: 9,000 kg, Mobile Roll Forming Machine for Frameless Steel Arch Buildings Automatic Production Line for Self-Supporting Steel Hangars and Arch Roofs The mobile roll forming machine is designed for the on-site production of self-supporting curved steel panels used for the construction of frameless steel buildings, arch hangars and self-supporting metal roofs. The technology makes it possible to construct large-span steel buildings without a conventional internal steel frame. Steel coil is formed into a structural profile, cut to the required length and then curved to the required building radius. Several curved panels are connected together using a special seaming machine to form a strong, continuous and self-supporting arch structure. The equipment can be used for the construction of: frameless steel hangars aircraft hangars agricultural buildings grain and machinery storage buildings warehouses industrial buildings workshops garages livestock buildings sports facilities Bwjdpfxjztwx Uo Afmew self-supporting steel roofs temporary buildings military and logistics storage facilities Mobile Production Directly at the Construction Site One of the main advantages of this technology is the possibility of producing the complete structural panels directly at the construction site. The main forming and curving equipment is installed on a mobile trailer chassis. The machine can therefore be transported to the building site, where steel coils are converted into finished structural arch panels. This is particularly important for long panels that would otherwise be difficult or expensive to transport. The supplied machine has two axles and eight tyres intended for movement around the construction site. Production Process The complete production process consists of several stages: Steel Coil → Decoiling → Straight Profile Forming → Cutting to Length → Curving → Panel Seaming → Lifting → Installation The supplied technical manual describes the machine as a combination of a roll forming section and an arch bending section, with electrically driven forming and bending and hydraulic cutting. Main Technical Specifications Parameter Specification Machine type Mobile arch sheet roll forming line Application Frameless / self-supporting steel buildings Feeding width 1000 mm Effective profile width Approx. 610 mm Material thickness 0.8–1.5 mm Forming stations 13 + 1 Straight panel forming speed Up to 15 m/min Arch panel forming / curving speed Up to 13 m/min Seaming speed Approx. 6 m/min Forming motor 7.5 kW Curving / bending motor 5.5 kW Cutting motor 4.0 kW Additional drive 3.0 kW Total installed motor power Approx. 20 kW Cutting system Hydraulic Cutting tool material Cr12MoV, heat treated Roll material 45# steel, chromed and hardened Roller hardness HRC 58–62 Control system PLC Machine dimensions Approx. 9000 × 2230 × 2200 mm Machine weight Approx. 9000 kg Chassis 2 axles / 8 tyres Different Profile Sizes Available The machine can also be manufactured for different structural profile dimensions according to the required building span and application Available configurations may include different: coil feeding widths finished profile widths profile depths steel thicknesses arch radii building spans For example, depending on machine configuration, profiles can be designed for relatively small buildings as well as large-span self-supporting arch structures

Condition: new, Year of construction: 2022, machine/vehicle number: 27762, type of input current: three-phase, input voltage: 22,000 V, input frequency: 50 Hz, nominal power (apparent): 250 kVA, secondary voltage: 400 V, type of output current: three-phase, output voltage: 400 V, Equipment: type plate available, SEA Trasformatori TTO oil-immersed distribution transformer for outdoor installation. Condition: new and unused warehouse stock. Never commissioned. Year of manufacture: 2022. Serial number: 27762. Country of manufacture: Italy. Nameplate data: - Rated power: 250 kVA - Primary voltage: 22 / 20 kV - HV tapping range: +/- 4 x 2.5% - Secondary voltage: 400 V - Rated secondary current: 360.8 A Bjdpfez Nx I Iex Afmeww - Frequency: 50 Hz - Phases: 3 - Cooling: ONAN - Winding material: aluminium - Highest voltage for equipment: 24 kV - Insulation level: LI 125 kV / AC 50 kV - Temperature rise: oil 60 K / windings 65 K The attached photograph shows the original manufacturer nameplate.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, filling weight (max.): 500,000 g, stroke rate (min.): 25 1/min, stroke rate (max.): 120 1/min, TECHNICAL DETAILS Molding process: Sliding plate technology Servo-driven molding system Suitable for meat, poultry, and non-meat products Typical throughput: 4,082 kg/h Bwedpfx Afozzp Sijmow Line width: 660 mm Stroke rate: 25–100 strokes/min Stroke rate SX: max. 120 strokes/min Capacity of the filling hopper: 500 kg EQUIPMENT Servo drive Sliding plate molding system Large-volume filling hopper

Condition: ready for operation (used), Year of construction: 2013, overall weight: 4,600 kg, Panel saw manufactured in 2013. This FORMAT4 Kappa Automatic features a robust design with a weight of 4,600 kg and a powerful 14.0 kW motor. It includes an integrated control terminal with monitor, keyboard, and mouse, along with safety wire fencing and roller material support tables. If you are looking to get high-quality panel cutting capabilities, consider the FORMAT4 Kappa Automatic machine we have for sale. Contact us for further details. Bedpfszx Uv Ujx Afmeww - Voltage: 400 V- Phase: 3-phase- Frequency: 50 Hz- Power: 14.0 kW- Current: 28.0 A- Weight: 4,600 kg

Condition: excellent (used), functionality: fully functional, We offer this very good FACADE PANEL ROLL FORMING machine. Input: 420mm output: 310mm Bwjdjzyclmopfx Afmew Decoiler, 16 stations, automatic cutting.

Condition: excellent (used), Roll former- Trapez T35/196 Input coils: 1000 mm, 1250mm Output: 1000mm thickness: 0.30-0.70mm Bwodpfjzycn Isx Afmow 27 stations.

Condition: excellent (used), Tile Imitation T-40/350 input coil: 1250mm output : 1114mm Bwsdpfxszyytbs Afmow auto stacker 16 stations.

Condition: ready for operation (used), Year of construction: 1998, Available immediately from our location: Console milling machine REFORM Type UF 32 Year of manufacture 1998 Table 1400 x 300 mm Travel ranges X/Y/Z 1100/300/520 mm SK 50 Spindle speeds 31.5 - 1400 rpm Drive power 7.5 kW Bedpfj Aa Iizox Afmoww Digital display Hydraulic vise Weight 2.7 tons Many tools and milling cutters included Price: Euro 2,750.00 + VAT, ex works

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 202.03.008.17, functionality: fully functional, input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 12 m/min, total height: 1,693 mm, total length: 4,620 mm, total width: 1,200 mm, Equipment: CE marking, documentation/manual, FORMAT4 Tempora F800 60.08 e-motion Edgebander Manufacturer: FORMAT4 / Felder Group Model: Tempora F800 60.08 e-motion Year of manufacture: 2017 Serial number: 202.03.008.17 Location: Slovenia Well-maintained FORMAT4 Tempora F800 60.08 e-motion edgebander in very good technical condition. The machine has processed approximately 63,000 linear meters. It is fully operational, regularly maintained, and ready for production. The machine is currently connected and can be inspected and tested while powered on. Technical data: - Feed speed: 12 m/min - Workpiece thickness: up to 60 mm - Coiled ABS/PVC edge thickness: 0.4–3.0 mm - Strip edge material: up to 8 mm - Electrical connection: 400 V / 50 Hz / 3-phase - Rated power: 11 kW - Rated current: 28 A - Required compressed air pressure: 7 bar Overall dimensions: - Length: approx. 4,620 mm - Machine width without extended front support: approx. 1,200 mm - Height with safety hood closed: approx. 1,693 mm - Required operating depth with front support extended: approx. 1,775 mm - Height with safety hood open: approx. 2,068 mm Equipment: - Pneumatic-mechanical workpiece stop at the infeed - Premilling unit with replaceable cutters - Premilling working height up to 64 mm - Infrared heating lamp - EVA glue pot - Reversing function of the glue roller - e-motion end-trimming unit with two motors - Pneumatically tilting end-trimming saws, adjustable from 0° to 15° - Tandem copying unit - Rondomat corner-rounding unit for edge thicknesses from 0.4 to 3 mm - Motorized positioning of the Rondomat unit - Radius scraper unit with pneumatic activation - Flat scraper unit for nesting applications - Release agent spray unit - Sliding agent spray unit Bsdpfx Asztbutsfmsww - LED interior working lights The machine is being sold due to investment in a newer edgebander. Availability is by agreement. Dismantling, loading, and transport are at the buyer's expense unless otherwise agreed. Please contact me through Machineseeker for further information, additional photos, a video demonstration, or to arrange an inspection.

Condition: used, axle configuration: 3 axles, first registration: 03/2001, loading space length: 13,600 mm, loading space width: 2,550 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 3,200 mm, suspension: air, tire size: 385/65R22,5, color: other, Equipment: ABS, Number of axles: 3, Tare weight: 6580 kg, Gross vehicle weight: 39000 kg, Chassis type: Full chassis, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, Body construction year: 2001, Axle type: BPW = Further information = Bwedpezr Ehhefx Afmew General information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle configuration Tire size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tire tread depth left: 1 mm; Tire tread depth right: 6 mm Axle 2: Tire tread depth left: 3 mm; Tire tread depth right: 4 mm Axle 3: Tire tread depth left: 5 mm; Tire tread depth right: 8 mm Weights Unladen weight: 6,580 kg Payload: 32,420 kg GVW: 39,000 kg Environment Emission class: Euro 0 Condition General condition: very poor Technical condition: very poor Optical condition: very poor Damage: none = Company information = Kleyn Trucks is one of the world's largest independent used vehicle dealers. Here, you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various production years and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing inventory • Recognizable quality • A good price • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an inquiry through our website. Inquire directly about our European warranty package.

Condition: good (used), Year of construction: 2002, Industrial robot Manufacturer: Kuka Type: KR30-2 (older model) Year of manufacture: 2002 Reach: 2000 mm Bedpfx Aeq Rd N Refmjww Weight: 880 kg Payload: 30 kg Kuka KRC2 controller Weight: 185 kg Processor: 733 MHz Operating system: Win95 Software version: V4.1.7 Kuka KCP2 teach pendant Kuka connecting cables 41126ä

Condition: new, color: blue, NEW 20FT FLATRACK steel floor Tare weight: 1,800 kg Payload: 28,680 kg Max. gross weight: 30,480 kg = Further information = General information Year of manufacture: Aug. 2025 Year of construction: 2025 Model year: 2025 Dimensions Dimensions (L x W x H): 606 x 244 x 33 cm Weights Unladen weight: 1,800 kg Payload: 28,680 kg GVWR (Gross Vehicle Weight Rating): 30,480 kg Condition Overall condition: very good Technical condition: very good Optical condition: very good Bsdpfx Afexvrmfemjww Further information Please contact Arne Honingh for further information.

Condition: used, Year of construction: 2019, New machine (used only for demonstration purposes in a school) Number of axes: 4 X-axis travel: 4000 mm Y-axis travel: 1670 mm Z-axis travel: 500 mm Spindle power: 12 kW, 24000 RPM * Number of axes: 4 * X-axis travel: 4000 mm * Y-axis travel: 1670 mm * Z-axis travel: 500 mm Technical specification * Spindle power: 12 kW * Spindle speed: 24000 RPM Additional information * Working area (maximum table size) * X: 3300 mm * Y: 1280 mm * Z distance: 250 mm * Spindle: * Tool interface: HSK F63 * Rated power at: approx. 12,000 RPM * Cooling: Air-cooled * Rotation: CW / CCW * Tool magazine * Linear tool magazine (side-mounted): 12 positions * Additional linear magazine on the portal: 4 positions * Max. tool diameter: 250 mm * Max. tool length: 300 mm * Drilling unit * Model: DH 24 6H 2S * Vertical spindles: 18 (12 in X, 6 in Y) * Horizontal spindles: 6 (4 in X, 2 in Y) * Max. drill length: 70 mm * Max. tool diameter: 10 mm * Nut sawing machines: 2 (X and Y) * Max. saw diameter: 120 mm * Max. speed: 6,000 RPM * Vacuum table Bwedpfezuxi Rjx Afmjw * 6 supports (instead of 4) * Two-circuit vacuum system * Height of vacuum suction cups: 100 mm * Pneumatic support locking * Adjustable side stops (Y-axis) * Axis system * X-axis: Rack and pinion drive * Y/Z-axis: Ball screw drive * Linear guides in all axes * Automatic central lubrication * Control and software * CNC control with CAD/CAM software * 3D simulation preview * DXF import function * Parametric programming * Remote maintenance package (internet-enabled)

Condition: used, Year of construction: 2021, Vertical panel dividing saw Manufacturer: Felder Format4 Type: Kappa V80 Year of manufacture: 2021 Technical data Saw unit Motor with 5.5 kW power Saw blade diameter: 300 mm Cutting depth: 80 mm Cutting length: 5300 mm Cutting height: 2200 mm Maximum horizontal cut: 2080 mm Bwjdpfx Afjzuy Dvsmjw Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: like new (used), Year of construction: 2019, operating hours: 25 h, functionality: fully functional, machine/vehicle number: 3820 345-19, total height: 2,020 mm, total width: 855 mm, total length: 2,580 mm, type of input current: three-phase, overall weight: 270 kg, film width: 280 mm, compressed air connection: 6 bar, number of blades: 1, input voltage: 380 V, product height (min.): 60 mm, product height (max.): 200 mm, product width (max.): 70 mm, product width (min.): 70 mm, path measurement accuracy: 1 mm, nominal power: 3 kW (4.08 HP), air demand: 3.6 m³/h, height adjustment type: electric, conveyor belt length: 1,000 mm, conveyor belt width: 300 mm, roll diameter: 300 mm, roll width: 280 mm, Equipment: documentation/manual, 4 seals (sachet) packaging machine, 2 lane, for liquid and semi-viscous products. Including: dosing unit and outlet conveyor dry contact (5A max) for external transfer pump to feed the 30 lt hopper 2 printers Markem 8018 (one per lane) photocell for printed film easy open tear notch Bodpfx Afjyt Iw Aomsww