Used Food Shelf for sale (9,459)

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Godsmhhypopfx Acwebk Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. Gbsdpfxomhh Dhe Acwek The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Godpfjfdkb Tox Acwsbk Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) Gbsdpjmhh Dzsfx Acwjk - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) Godemhh Anjpfx Acwebk - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Gedoguk A Hjpfx Acwobk The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Gbsdpfx Acomhhy Nswsk Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) Gbjdpfxjguk Dke Acwek - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Gsdpfx Acemhh Dtowjbk - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard Gbjdpfxsguk Dvj Acwjk - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, functionality: fully functional, Shelf trolley / Transport trolley / Order picking trolley / up to 7 levels / 3 mesh walls / 3 shelves Gbedpfsyw Nthjx Acwok

Condition: like new (used), mileage: 50 km, power: 103 kW (140.04 HP), first registration: 01/2026, fuel type: diesel, overall weight: 3,500 kg, loading space length: 3,700 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, Year of construction: 2026, Equipment: ABS, air conditioning, airbag, all-season tires, cruise control, tire pressure monitoring, Food Truck Exhibition Vehicle. Appearance Package! (Roof spoiler / alloy wheels) Ambient equipment (leather steering wheel, captain's chairs, etc.) Available for immediate delivery! Other configurations available upon request! Driving licence B! Equipment: - Gas supply system - Hygiene package - Gas stove with 4 burners and gas oven (gas-operated) - Double-basin fryer (gas-operated) - Griddle plate (gas-operated) - Bain-marie (gas-operated) - Tall refrigerator in the rear - Undercounter refrigerator - Undercounter freezer Gjdpfxoywabpe Acwebk - Commercial extraction hood - Gas supply system - Partial stainless steel interior - Illuminated exterior flaps - And much more ... Financing available in Germany and Austria! Benefit from our over 40 years of experience in mobile vehicle construction for mobile sales solutions. Manufactured in Ibbenbüren, Germany!

Year of construction: 2024, condition: excellent (used), functionality: fully functional, total length: 700 mm, total width: 950 mm, total height: 2,000 mm, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 04/2027, type of input current: AC, Self-Service Display Rack 950 with lighting 4 beech wood grids 12 dispensing flaps bottom shelf Connection: 220V Dimensions: 950 x 700 x 2000 mm (W x D x H) mobile Used unit Options: Maintenance contract Delivery service Instruction & commissioning Gsdpfsytl Thox Acwebk We have further shelving units in stock!

Condition: excellent (used), axle configuration: 3 axles, first registration: 12/1988, loading space volume: 33 m³, total length: 11,400 mm, total width: 2,550 mm, total height: 3,450 mm, suspension: air, tire size: 385/65 R22,5, Year of construction: 1988, Equipment: ABS, = Additional options and accessories = - Air suspension = Remarks = TRANSPORT TO ANTWERP 590 EURO Gbjdpfx Acjxt Iuaowsk = Further information = Tyre size: 385/65 R22.5 Axle brand: BPW Suspension: Air suspension Unladen weight: 7,600 kg Payload: 34,000 kg Gross vehicle weight: 26,400 kg Number of compartments: 5 Technical condition: very good Visual condition: very good

Condition: good (used), Glass shelf depth per compartment: 65 mm Max. glass height: 1680 mm Width: 1500 mm Depth: 2600 mm Height: 2060 mm Condition: Good, second-hand Gbodpoyx Uf Sjfx Acwek

Condition: used, total length: 39,900 mm, total height: 3,000 mm, shelf height: 3,000 mm, support length: 2,700 mm, Included in this package: 15 uprights, each 3,000mm x 1,100mm (blue) 56 beams, each 2,700mm (yellow) 112 safety pins This results in a racking row with 14 bays, each with 2 levels plus floor pallet position = total of 126 pallet spaces (1,000kg per pallet) Approx. 800 uprights and 4,500 beams are available for this system. Please contact us for details. Manufacturer: Jungheinrich Type: MPB Condition: used, good condition Gbjdpfx Asyvr U Ejcwsk Height: 3,000 mm Length: approx. 39.90 meters Rack depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Compartment load: 3,000 kg Bay load: 6,000 kg Pallet spaces: 126 Accessories such as: Floor fixings Connectors Load notices Impact protectors Guard rails Grating panels Rear mesh panels Support bars Safety barriers ...and much more. Simply ask us for your requirements! "Benefit from over 20 years of industry experience – we provide expert and personal advice as your specialist dealer for new and used racking systems." Sales & Delivery Conditions (B2B) - Prices & Logistics: All prices are net ex location. Express delivery with our own fleet possible by arrangement. - Offer status: All offers are non-binding. Subject to prior sale. - Retention of title: Goods remain our unrestricted property until full payment is received (no processing or disposal before settlement). - Warranty: Exclusive sales to businesses (§14 German Civil Code). No liability for material defects with used and grade II goods. Manufacturer warranties apply to new goods.

Condition: used, Included in this package: 1 x upright 11,750 mm x 1,100 mm (galvanized) (The uprights can be cut to any height—just ask us) Available from Berlin or Neuwied For this system, 400 uprights and 2,800 beams are available. Please contact us for more information. Manufacturer: Meta Jungheinrich Type S Gbedpfxoyvr Swe Acwok Condition: used, good condition Height: 11,750 mm Rack depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Bay load: 11,750 kg with a buckling length of 235 cm Accessories such as: - Floor fixings - Connectors - Load warning signs - Impact protection guards - Safety barriers - Wire mesh shelves - Back mesh panels - Depth bars - Boundary railings And much more... Just ask! "Benefit from over 20 years of industry experience – we offer you expert and personal advice as your specialist dealer for new and used racking systems." Sales & Delivery Terms (B2B) - Prices & Logistics: All prices are net ex location. Express delivery using our own fleet possible by individual arrangement. - Offer status: All offers are subject to change without notice. Intermediate sale expressly reserved. - Retention of title: Goods remain our unrestricted property until full payment has been received (prohibition of disposal and processing). - Warranty: Exclusive sale to commercial customers (§ 14 German Civil Code). For used and surplus stock, liability for material defects is excluded. For new goods, manufacturer warranties apply.

Condition: used, Included in this package: 1 x pallet racking beam 1 x crossbeam, 2,700 mm (orange) 2 x locking pins Gbsdpoyvr Hnsfx Acwjk Available from Berlin or Neuwied There are 400 frames and 3,000 beams available for this system. Feel free to contact us. Manufacturer: Meta Jungheinrich TYP S Condition: used, good condition, some with labels Beam length: 2,700 mm Bay load: 3,000 kg Accessories such as: - Floor fixings - Connectors - Load capacity warning notices - Impact guards - Guard rails - Wire mesh decks - Rear mesh panels - Depth support bars - Safety barriers and much more... Just ask us! "Benefit from over 20 years of industry experience – we provide you with expert and personal advice as your experienced specialist supplier for new and used racking systems." Sales & Delivery Conditions (B2B) - Prices & Logistics: All prices are net ex location. Express delivery via our own fleet available upon request. - Offer status: All offers are non-binding. Subject to prior sale. - Retention of title: Goods remain our sole property until full payment has been received (prohibition of disposal and processing). - Warranty: Sale exclusively to business customers (§ 14 German Civil Code). For used and second-choice goods, liability for material defects is excluded. For new goods, the respective manufacturer's warranties apply.

Condition: used, Included in this package: 50 uprights, each 11,750mm x 1,100mm (galvanized) (The uprights can be cut to any required height – simply inquire) 396 beams, each 2,700mm (orange) 792 safety pins Available ex Berlin or Neuwied This configuration results in a racking aisle with 49 bays, each with 4 levels plus storage on the floor, providing a total of 743 pallet spaces (900kg per pallet). Additional uprights and beams for this system are also available. Contact us for details. Manufacturer: Meta Jungheinrich Type S Condition: used, good condition, some with labels Height: 11,750 mm Length: approx. 137.30 running meters Rack depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Maximum shelf load: 2,700 kg Maximum bay load: 11,750 kg Pallet spaces: 743 Accessories such as: - Floor anchors - Connectors - Load warning signs - Impact protectors Godpsyvr Edefx Acwebk - Guard rails - Grating - Rear mesh panels - Depth bars - Partition railings and much more... Simply contact us for details! "Benefit from over 20 years' industry experience – we provide expert, personalized advice as your specialist dealer for new and used racking systems." Terms & Conditions of Sale and Delivery (B2B) - Prices & Logistics: All prices are net ex works. Express delivery via our own fleet available upon request. - Offer status: All offers are subject to change. Intermediate sale expressly reserved. - Retention of title: The goods remain our sole property until full payment has been received (prohibition of further disposition and processing). - Warranty: Sale is exclusively to commercial customers (§ 14 BGB). For used and IIa goods, liability for material defects is excluded. Manufacturer warranties apply to new goods.

Condition: used, Included in this package: Godpfeyvr Dyjx Acwobk 100 uprights at 11,750mm x 1,100mm (galvanised) (Uprights can be cut down to any height—just ask us) 792 beams at 2,700mm (orange) 1,584 locking pins Available from Berlin or Neuwied depot This set creates a racking row with 99 bays, each with 4 beam levels + floor storage space = a total of 1,485 pallet spaces (900kg per pallet) Additional uprights and beams are available for this system. Please contact us for your specific requirements. Manufacturer: Meta Jungheinrich, TYPE S Condition: used, good condition, some with stickers Height: 11,750 mm Length: approx. 277.2 linear meters Rack depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Shelf load: 2,700 kg Bay load: 11,750 kg Pallet positions: 1,485 Accessories such as: - Floor fixings - Connectors - Load capacity warning signs - Impact protection - Guard rails - Mesh shelves - Rear mesh panels - Depth support bars - Partition rails …and much more. Simply ask us for what you need! “Benefit from over 20 years of industry experience – we offer expert and personal advice as your specialist dealer for new and used racking systems.” Sales & Delivery Conditions (B2B) - Pricing & Logistics: All prices ex works, net. Express delivery via our own fleet available by arrangement. - Offer status: All offers are non-binding. Subject to prior sale without notice. - Retention of Title: Goods remain our property until full payment has been received (no right of disposal or transformation). - Warranty: Exclusive sale to business customers (§ 14 German Civil Code). No liability for material defects in used/grade II goods. Manufacturer’s warranties apply for new goods.

Condition: new, Year of construction: 2026, Kilia Kutter Vacuum 30 6000 Vario Knife speeds Mixing/Cutting (RPM): 500 to 5100, variable Knife speed (m/s): 80 Stepless knife drive Stepless bowl drive Vacuum lid hydraulic Time/rounds cut-off Temperature cut-off Central lubrication Remote control Bowl volume L/kg: 30 L / 21 kg Bowl rotations RPM: 7 to 20, variable Touch and manual control Electric knife cover drive: optional Gjdpfxoyv Uwcs Acwobk Cooking/cooling device: optional Recipe manager KPV: optional Customer-side pre-fuse: 25 A gG/C Rated connected load: 15 kW

Condition: used, Included in this package: 100 uprights, each 11,750 mm x 1,100 mm (galvanized) (The uprights can be cut to any desired height—please inquire) 792 beams, each 2,700 mm (orange) 1,584 locking pins Available ex location Berlin or Neuwied Forms a racking row with 99 bays, each with 4 levels plus ground storage space = a total of 1,485 pallet positions (900 kg per pallet) Additional uprights and beams for this system are available. Simply contact us for details. Manufacturer: Meta Jungheinrich Type S Condition: used, good condition, partially with labels Height: 11,750 mm Total length: approx. 277.20 linear meters Rack depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Compartment load (max.): 2,700 kg Bay load (max.): 11,750 kg Total pallet positions: 1,485 Accessories such as: - Floor fixings - Connectors - Load warning labels - Impact protection guards - Safety rails - Wire mesh decks - Rear mesh panels Gsdpfxsyu Rd Us Acwobk - Depth support bars - Barrier railings ...and much more. Feel free to inquire about your specific requirements! Terms of Sale & Delivery (B2B) - Prices & Logistics: All prices are net ex works. Express delivery using our own fleet can be arranged individually. - Offer status: All offers are subject to prior sale; intermediate sale expressly reserved. - Retention of title: Goods remain our unrestricted property until payment has been received in full (no right to dispose of or process). - Warranty: Sale exclusively to commercial customers (§ 14 BGB). For used and grade II goods, warranty for defects is excluded. Manufacturer warranties apply to new goods as stipulated by the respective manufacturer.

Condition: used, Included in this package: 1 x beam, 3,600 mm length (yellow) 2 x locking pins For this system, approximately 170 upright frames and 800 beams are available. Please feel free to contact us. Manufacturer: Tixit Condition: used, good condition Rack depth: 1,100 mm Beam length: 3,600 mm Compartment load capacity: 3,200 kg Accessories such as: - Floor fixings - Connectors - Load warning signs - Collision guards - Guardrails - Wire mesh decks - Rear mesh grids - Depth bars - Barrier rails ...and much more. Just ask us for your requirements! Sales & Delivery Conditions (B2B): Gbodpfx Aeyu Rbaecwjk - Pricing & Logistics: All prices are net ex-works. Express delivery via our own fleet can be arranged individually. - Offer Status: All offers are subject to change without notice. Prior sale expressly reserved. - Retention of Title: Goods remain our unrestricted property until full payment has been received (handling and processing prohibition applies). - Warranty: Sales exclusively to commercial customers (§ 14 BGB). For used and grade IIa goods, liability for material defects is excluded. For new goods, the respective manufacturer warranties apply.

Condition: used, Included in this package: 9 uprights, each 5,800 mm x 1,100 mm (blue) 48 beams, each 2,700 mm (yellow) 96 safety pins Forms a racking row with 8 bays, each with 3 storage levels plus a floor-level pallet position = total of 96 pallet spaces (1,000 kg per pallet) Additional uprights and beams are available for this system. Please contact us for more information. Manufacturer: Jungheinrich Esmena Condition: used, good condition, some with labels Height: 5,800 mm Length: approx. 22.50 linear meters Rack depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Shelf load: 3,000 kg Bay load: 9,000 kg Pallet spaces: 96 Accessories, e.g.: - Floor anchoring - Connectors - Load capacity signs Gbjdpfoyu N T Usx Acwsk - Impact protection barriers - Guard rails - Wire mesh decking - Mesh rear panel - Support bars - Safety rails ...and much more. Just ask us! Sales & Delivery Terms (B2B) - Prices & logistics: All prices are net ex-works. Express delivery via our own fleet is possible by separate arrangement. - Offer status: All offers are non-binding. Subject to prior sale. - Retention of title: The goods remain our unrestricted property until full payment has been received (prohibition of disposal and processing). - Warranty: Exclusive sale to business customers (§ 14 German Civil Code). For used and second-choice goods, liability for material defects is excluded. The respective manufacturer's warranties apply for new goods.

Condition: used, Included in this package: 11 x upright frames, each 5,800 mm x 1,100 mm (blue) 60 x beams, each 2,700 mm (yellow) 120 x safety pins This results in a racking row with 10 bays, each with 3 beam levels plus floor storage area = a total of 120 pallet positions (500 kg per pallet) Additional uprights and beams are available for this system. Please contact us for details. Manufacturer: Jungheinrich Esmena Condition: used, good condition, some units with stickers Height: 5,800 mm Length: approx. 28.10 linear meters Rack depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Shelf load: 1,500 kg Bay load: 7,500 kg Pallet positions: 180 Accessories such as: Gsdpoyu N S Dofx Acwobk - Floor anchoring - Connectors - Load warning signs - Impact protectors - Guardrails - Mesh shelves - Back mesh panels - Depth supports - Barrier rails and much more... Simply inquire! Sales & Delivery Conditions (B2B) - Pricing & logistics: All prices are net ex works. Express delivery via our own fleet is possible upon individual agreement. - Offer status: All offers are subject to change without notice. Prior sale expressly reserved. - Retention of title: Goods remain our unrestricted property until fully paid for (no right of disposal or processing). - Warranty: Sale exclusively to commercial customers (§14 German Civil Code). For used and IIa goods, liability for material defects is excluded. For new goods, respective manufacturer warranties apply.