Used Floating Dredgers for sale (234)

Condition: refurbished (used), DKV III Throughfeed Press with Brake Unit Refurbished Available either with original hydraulic motors or converted to servo motors Options: - Chain threading device - Traveling cross-cut saw Function: For pressing finger joints without stops (in continuous operation). The upper and lower plate chains provide feed force. Following brake plates transfer the required longitudinal press force to the wood via friction. Advantages: - High output despite relatively slow feed rates - Absolutely no vertical finger offset at the joints Technology: Heavy-duty 2" plate chain, pneumatically lift/lowerable Floating brake elements Pressing force measurement via contact manometer Height adjustment electric Maximum pressing force adjustable and dependent on feed speed and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Lajdpfx Asv T Aqyen Usb Feed speed adjustable 10-70 m/min Drive power Feed unit adjustment 1 kW Brake adjustment 1 kW Hydraulic motors 45 kW Technical data: Wood width 90 - 180 mm Wood thickness 20 - 80 mm Thickness-width ratio 6:10 Wood cross-section for 15/16.5 mm fingers max. 90 cm²

Condition: new, working width: 85,000 mm, For enquiries regarding the attachment, please contact Mr. Herden (by phone). Seppi M. H3 085 Mulcher / NEW / in stock & immediately available Price: €6,890.00 net / €8,199.10 gross - Working width: 85 cm - Total width: 97 cm - Depth: 80 cm - Height: 66 cm - Weight: 181 kg - Mulching head for mounting on a hydraulic arm - Mulches grass and brush up to 3 cm diameter - Suitable for excavators from 2 to 5 tonnes - Suitable for mounting on various adapter plates - Floating attachment (parallelogram linkage) - Indirect V-belt drive with 3 V-belts - Drive designed for hydraulic motor, depending on the carrier’s hydraulic flow rate - Housing made from wear-resistant AR400 steel - Front protection with chains - Rear guard made of rubber - Reinforced support roller with double taper roller bearings, height adjustable - Colour: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW flails (standard) - 9 pieces, spare part no. 150.02.041 OPT 428 Hydraulic gear motor 11cm³ - With flow control valve and motor safety valve DRAIN SAFE TM to protect the motor in case of improper use - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 20 - 50 OPT 529 DRAINLESS system with pressure accumulator (NO leakage oil line required!) - Includes hoses and non-return valve Optional: MS03 adapter plate incl. bolts and installation = €530 net Two hydraulic lines are required: supply and return. No leakage oil line is needed! The unit is supplied without hoses or couplings. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a large selection of various Seppi M. products in stock, all immediately available! Simply contact us at / . Financing offer available on request. Lodpfoyi Ryxox An Ueab We are official Seppi M. distributor and service partner. We are official Magni telehandler distributor and service partner. We are official DMS distributor and service partner. We are official Westtech distributor and service partner. We are official JCB construction machinery distributor and service partner. We are official Mercedes-Benz distributor and service partner. We are official Iveco distributor and service partner. We are official Holp distributor and service partner. We are official OilQuick distributor and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. range for you! Errors and prior sale excepted. = Further Information = Please contact Marius Herden for more information.

Condition: new, working width: 105,000 mm, For inquiries regarding the attachment, Mr. Herden will assist you (by phone at ...). Seppi M. H3 105 Mulcher / incl. rotation motor / NEW / in stock & immediately available Price: €10,590.00 net / €12,602.10 gross - Working width: 105 cm - Overall width: 117 cm - Depth: 80 cm - Height: 66 cm - Weight: 217 kg - Mulching head for mounting on a hydraulic boom - Mulches grass and brush up to 3 cm Ø - Suitable for excavators from 2 to 5 tons - Compatible with various mounting plate systems - Floating mount (parallelogram guide) Lsdpfxsyix Hto An Usab - Indirect V-belt drive with 3 V-belts - Drive suitable for hydraulic motor depending on the carrier machine's hydraulic flow - Housing made of wear-resistant AR400 steel - Front protection with chains - Rear protection with rubber guard - Reinforced support roller with double taper roller bearings, height-adjustable - Color: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW hammers (standard) - 9 pcs., part number 150.02.041 OPT 429 Hydraulic gear motor 17 cm³ - With flow control valve and "DRAIN SAFE TM" motor safety valve protects the motor in the event of incorrect use - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 35 - 60 OPT 529 DRAINLESS system with pressure accumulator (NO drain line required!) - Including hoses and check valve OPT 372 Hydraulic 190° rotation device Optional: MS03 adapter plate incl. intermediate flange, bolts and installation = €700 net Two hydraulic lines are required: supply and return. No drain line needed! Additionally, a separate hydraulic circuit is required for the rotator. The machine is delivered without hoses or couplings. Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a wide selection of various Seppi M. products available from stock! Feel free to contact us at / . Upon request, we are happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Seppi M. product range! Subject to errors and prior sale! = More information = Contact Marius Herden for more information.

Condition: new, working width: 85,000 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H3 085 direct / Flail Mulcher / Mulcher / NEW unit / In stock & immediately available Price: €6,690.00 net / €7,961.10 gross - Working width: 85 cm - Total width: 102 cm - Depth: 80 cm - Height: 53 cm - Weight: 165 kg - Mulches grass and brushwood up to 3 cm Ø - Suitable for excavators from 2 to 5 tonnes - AR400: Housing made of high-strength, wear-resistant AR400 steel - Universal interface for mounting various adapter plates - FLOAR: Floating mounting (parallelogram linkage) for adapting to ground contours - Direct drive, no V-belts - Drive for hydraulic motor depending on oil flow - Housing made of wear-resistant steel - Front guard with chains - Rear guard made of rubber - Height-adjustable support roller 133 mm Ø - Colour: anthracite RAL7021, red RAL3020 OPT 039 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMW flails (standard) - 9 pieces, part number 150.02.041 OPT 428 PLUG & PLAY - Hydraulic gear motor 11 cm³ with flow control valve - Required hydraulic pressure in bar (min-max): 150 - 230 - Required hydraulic flow in l/min (min-max): 25 – 60 OPT 529 DRAINLESS system with pressure accumulator (NO drain line required!!) - (max. return line (T) pressure 5 bar) Two hydraulic lines required: supply and return. No drain line! The unit is supplied without hoses or fittings. Optional: MS03 adapter plate including bolts and assembly = €530.00 net We also have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We keep a very large selection of Seppi M. products in our warehouse – all immediately available! Mr. Herden (tel.) will be happy to assist you. Upon request, we are happy to provide you with a financing offer. Lasdpfx Aoyix Hgsn Ueb We are an official sales and service partner for Seppi M. We are an official sales and service partner for Westtech. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Holp. We are an official sales and service partner for DMS. We are an official sales and service partner for Magni telescopic handlers. We are an official sales and service partner for JCB construction machinery. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. Furthermore, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range for you! Errors and prior sale excepted! = Further Information = Please contact Marius Herden for further information.

Condition: used, mileage: 342,789 km, power: 120 kW (163.15 HP), first registration: 03/2013, fuel type: diesel, empty load weight: 4,095 kg, maximum load weight: 645 kg, overall weight: 5,000 kg, axle configuration: 4x2, wheelbase: 3,650 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: steel-air, number of seats: 3, loading space length: 3,650 mm, loading space width: 1,900 mm, loading space height: 1,980 mm, Equipment: ABS, air conditioning, airbag, cabin, central locking, onboard computer, power assisted steering, * German vehicle * Stollenwerk stretcher available for an extra charge * First owner * Rear axle air-suspended * Ambulance and emergency vehicle box body * Body by Fahrtec Systeme * Adjustable floating stretcher platform * Wheelchair mount * Central locking for patient compartment * Air conditioning KONVEKTA * Stretcher wheelchair * 1 attendant seat * Refrigerated compartment * Warming cabinet * Sink * Medical cabinets * Oxygen and suction system pre-installed * 12V + 230V sockets * Roof hatch * External storage compartments * Rear wing doors with access step * Side door with sliding window and step * All-round work lighting * Partition wall with sliding window * Intercom system * Driver's cab with 2 seats * Air conditioning * Automatic transmission * Electric windows * Electrically heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Twin-tired rear axle * Body dimensions: L=3,650 x W=1,900 x H=1,980 mm * Wheelbase: 3,650 mm * Gross vehicle weight: 5,000 kg * Unladen weight: 4,355 kg * German commercial law applies to sales to businesses and for export (EU and non-EU). If a new TÜV inspection is requested, we will be happy to offer you a quote from one of our partner workshops. Our offer is in general WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. You can find further trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to avoid any misconceptions regarding condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. Lodpfjw Ip D Tsx An Ujab All information is provided without guarantee. We do not assume liability for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to prior sale and changes. Errors excepted.

Condition: used, mileage: 399,970 km, power: 120 kW (163.15 HP), first registration: 05/2012, fuel type: diesel, empty load weight: 3,645 kg, maximum load weight: 955 kg, overall weight: 4,600 kg, axle configuration: 4x2, wheelbase: 3,650 mm, brakes: other, color: yellow, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 5, loading space length: 3,650 mm, loading space width: 2,000 mm, loading space height: 1,970 mm, Equipment: ABS, air conditioning, cabin, central locking, fog lights, parking heater, power assisted steering, sliding door, soot filter, * German vehicle * Stollenwerk stretcher available at an additional cost * Intensive care ambulance box body * Bodywork by WAS Ambulance * Adjustable floating stretcher table Stryker Model 6381 * 3 attendant seats * Air conditioning in passenger compartment * Electric heater * Pull-out cabinet * Warming cabinet * Medical cabinets * Oxygen and suction system pre-installed * 220 Volt power sockets * Ampoule compartment * External storage compartment * Right-hand sliding door with electric step * Rear wing doors with step * Driver’s cab with 2 seats * Air conditioning * Auxiliary heater * Driver and passenger airbags * Height-adjustable driver and passenger seats with armrest * Electric windows * Electrically adjustable and heated mirrors * Automatic transmission * Partition wall with sliding window * Daytime running lights Lodpovhpqvsfx An Ueab * Radio CD * Central locking with remote control * ABS and ASR * Twin rear wheels * Signal system * Work lights * Body dimensions: L=3,650 x W=2,000 x H=1,970 mm * Wheelbase: 3,650 mm * GVW: 4,600 kg * Payload: 955 kg * For sales to traders and for export (both EU and non-EU), German commercial law applies. If a new TÜV inspection is required, we will be happy to provide a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV certification, without new SP, and without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Notice: We strongly recommend and offer a viewing and inspection of the goods to avoid any misconceptions regarding their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We accept no liability for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and specification of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: used, mileage: 210,823 km, power: 110 kW (149.56 HP), first registration: 03/2011, fuel type: diesel, empty load weight: 4,400 kg, maximum load weight: 450 kg, overall weight: 4,850 kg, axle configuration: 4x2, wheelbase: 3,650 mm, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: steel-air, number of seats: 3, loading space length: 3,650 mm, loading space width: 1,900 mm, loading space height: 1,980 mm, Equipment: ABS, air conditioning, airbag, cabin, central locking, onboard computer, power assisted steering, * German vehicle * Stretcher from Stollenwerk available at extra cost * 1st owner * Stollenwerk stretcher for an extra charge * Telma retarder * Rear axle air suspension * Ambulance and emergency vehicle box body * Body by Fahrtec Systeme * Adjustable floating stretcher table * Wheelchair mounting facility * Central locking system for patient compartment * KONVEKTA air conditioning unit * 1 attendant seat * Refrigerated compartment * Warming cabinet Lajdpfxevhpprj An Ujb * Sink * Medical cabinets * Prepared for oxygen system and suction unit * 12V + 230V sockets * Roof hatch * External storage compartments * Rear wing doors with step * Side door with sliding window and step * Signal system dismantled, stored inside the vehicle * All-around work lights * Partition wall with sliding window * Intercom system * Driver’s cab with 2 seats * Air conditioning * Automatic transmission * Electric window lifters * Electrically adjustable, heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Rear axle with twin tyres * Body dimensions: L=3,650 x W=1,900 x H=1,980 mm * Wheelbase: 3,650 mm * Gross vehicle weight: 4,850 kg * Unladen weight: 4,400 kg * For commercial sales and export (non-EU and EU), German commercial law applies. If a new TÜV inspection is required, we will gladly provide a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, WITHOUT new DGUV, WITHOUT new SP, WITHOUT new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods to avoid misunderstandings regarding their condition and suitability. Inspection and examination are possible at any time by appointment and are expressly desired. All information provided without guarantee. We accept no liability for errors or incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to prior sale, changes, and errors.

Condition: new, functionality: fully functional, overall weight: 1,000 kg, Year of construction: 2026, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 100 mm, controller manufacturer: CSMIO, controller model: IPM, sheet thickness steel (max.): 20 mm, control type: CNC control, degree of automation: automatic, sheet thickness stainless steel (max.): 20 mm, actuation type: electric, CNC controlled plasma cutting system with water table 3000x1500mm, comprising: - Operator terminal - machine control / SimCNC - nesting and G-code generation / i3 Nest - drawing software / i3 CAD - Parametric standard components / i3 Macro - repair tool / DXF / i3 DXF Cleaner - WIN 11 PRO - Processor / i7 / 3.8 GHz - Memory / 16 GB RAM - Graphics / Radeon RX550/550 Series - Hard drive / 1TB Samsung SSD 980 M.2 - Mainboard / WIFI - 24" monitor - USB 3.0 / data transfer Lasdpfx Aex Sdtfen Uob - THC / automatic height control - Collision protection sensors - Ohmic and floating touch sensing - engraving unit / FESTO pneumatics - workspace monitoring - Servo drives on all axes - Linear rail guides - Rack and pinion drive - Working area 3000x1500mm - Welded machine bed - Pipe cutting up to 120mm - Positioning aid / point laser - Plasma power source / Hypertherm SYNC 105A - Maintenance unit / dry and clean air

Condition: new, functionality: fully functional, power: 18 kW (24.47 HP), fuel type: diesel, empty load weight: 2,170 kg, lifting height: 2,836 mm, Year of construction: 2023, total length: 3,458 mm, construction height: 2,258 mm, drive type: Diesel, construction width: 1,100 mm, Wheel loader Gearbox: Hydrostatic Speed class: 20 Condition: New Technical condition: New Front tires type: pneumatic Lsdpfx Anjv Db Uxs Uoab Front tires condition: New Rear tires type: pneumatic Rear tires condition: New Description: 4-post driver's protection roof; mechanically suspended seat; adjustable steering column; floating position, electrical control including wiring; EURO mount; proportional front auxiliary hydraulics

Year of construction: 2008, condition: ready for operation (used), A vertical washing and drying system for flat glass is offered: 3 cleaning zones, 6 roller brushes, drying zone (warm air), warm water treatment (heating tank), quartz sand filter, recirculation system, suitable for: float glass, laminated glass, load capacity: 150kg/m², glass thickness: up to 15mm, working height: approx. 2000mm. Inspection possible by arrangement. Lasdjx Hff Sspfx An Ueb

Year of construction: 1985, condition: ready for operation (used), Workpiece width: 3200mm, max. force: 555kN, line force: 150N/mm, including Küsters floating roller (S-roller), 1x Raculan, 1x steel roller, on-site inspection is possible. Ljdperm S Exofx An Ujab

Condition: used, Year of construction: 2008, machine/vehicle number: M301, Used CFT Oil Filling Monoblock – Comaco 6000 bph – Overview This second-hand CFT–COMACO RVAR 6/10 + TA/3 is a volumetric piston filling and press-on capping monoblock engineered for edible oil. Built in 2008 and currently in production, it is a proven asset for industrial packaging environments looking to expand or upgrade a used bottling line. We can sell it as-is (see and like) or with revamping and preventive maintenance operations to prepare the monoblock for production. Revamping & Preventive Maintenance Activities If required, the following revamping activities can be carried out to ensure reliability and readiness for production: Assembly of machine parts at KBB workshop General machine cleaning General lubrication (greasing, oil level check and possible replacement) Inspection of rubber parts (belts and gaskets) with replacement if necessary Machine start-up: check of circuit integrity and correct functioning in manual/automatic modes Verification of format change equipment availability and integrity Technical Specifications & Performance Data Filler – CFT/COMACO RVAR 6/10 (volumetric) Product: Edible oil (filling temperature 10–30 °C) Filling system: 6 volumetric dosing groups (cylinders & pistons, plug valves), out-of-neck filling; max dose 10,500 cc Nozzles: 6 + 6 + 6 patented nozzles dedicated to edible oils Accuracy: 1σ = 0.6 g Mechanical data: filler pitch 377 mm; pitch circle diameter 720 mm; max container diagonal 220 mm; max height 460 mm Construction: painted steel base fully clad in AISI 304 stainless steel; AISI 304 product hopper with convex bottom and float level control Capper – TA/3 (press-on) 3 capping heads with PP320 press-on heads and positive pick (vacuum-assisted) Rated capacity: up to 6000 cph for PET press-on caps Pitch circle diameter 360 mm; machine pitch 377 mm Pick & place cap transfer; hardened steel cam for head pistons Automatic electric turret height adjustment; centralized lubrication shared with filler Two cap elevators, each with 300 L covered hopper, cleated belts, and low-level control; mobile stainless steel frames on wheels Formats, closures and indicative speeds PET: 1 L (Ø20), 2 L (Ø28), 3 L (Ø40), 5 L (Ø40), 10 L (Ø40) Tinplate: 1 L (Ø32), 3 L (Ø32), 3 L/Gallon/5 L (Ø32) Press-on caps: 31/17 (1 L PET), 38/24 (2 L PET), 51/24 (3–5–10 L PET); flex-spout common to all tinplate formats Approx. filler outputs: up to 3500 bph (1 L PET Ø20), 3000 bph (2 L PET Ø28), 2500 bph (3 L tinplate Ø32), 2500 bph (5 L PET Ø40), 2200 bph (5 L tinplate Ø32), 1100 bph (10 L PET Ø40) Advanced Automation & Control Systems Siemens PLC: SIEMENS S7 E300 with operator controls for automatic and manual modes; inverter-driven main motion with increased power to drive the capper via gears Automatic turret height adjustment (filler and capper) Laodpoyhbtgofx An Ujb Micrometric volume adjustment via cam reducer; adjustable even during machine motion Volume compensation versus product temperature (automatic correction for ±2 °C delta) Per-doser volume fine correction NO CAN–NO FILL device prevents valve opening without a container

Condition: new, functionality: fully functional, Year of construction: 2025, degree of automation: semi-automatic, laser type: fiber laser, Equipment: CE marking, dust extraction, emergency stop, Diamond Tube Laser T9350 – Precision and Flexibility for Tube and Profile Processing Lsdpfxjf Ak Swe An Uoab The Diamond Tube Laser T9350 from Eckert Cutting is a state-of-the-art laser tube cutting system specifically designed for processing tubes and profiles. Its robust gantry construction and angled rack-and-pinion drive provide exceptional rigidity, stability, and speed. Thanks to an intelligent, pneumatically controlled clamping system and floating tube support, the machine securely holds tubes and profiles of varying shapes and lengths—ensuring consistently high cutting quality even with long parts. The system enables the processing of a wide range of tube and profile geometries, including round, square, rectangular, oval, elliptical, special profiles, channels (C), I- and H-beams, and many other shapes. Complex angled and bevel cuts of up to 45° are also possible (with optional 4-, 5-, or 6-axis heads). Additional highlights include: 360° processing with CNC-controlled self-centering, high cutting precision with finely defined cut edges, stable production even with long tubes, as well as options for series production and automation through optional loading systems. With its versatility and reliability, the Diamond Tube Laser T9350 is ideally suited for companies in metalworking, steel construction, mechanical engineering, and fabrication—anywhere precise tube and profile processing with high efficiency and repeatability is required.

Condition: used, mileage: 335,804 km, power: 120 kW (163.15 HP), first registration: 02/2012, fuel type: diesel, empty load weight: 4,415 kg, maximum load weight: 645 kg, overall weight: 5,000 kg, axle configuration: 4x2, wheelbase: 3,650 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: steel-air, number of seats: 3, loading space length: 3,650 mm, loading space width: 1,900 mm, loading space height: 1,980 mm, Equipment: ABS, air conditioning, airbag, cabin, central locking, onboard computer, power assisted steering, * German vehicle * Stollenwerk stretcher available for an extra charge * First owner * Rear axle air-suspended * Ambulance and rescue vehicle box body * Body by Fahrtec Systeme * Adjustable floating stretcher table * Wheelchair mount * Central locking for patient compartment * KONVEKTA air conditioning * Stretcher wheelchair * 1 attendant seat * Refrigerated compartment * Warming cabinet * Sink * Medical cabinets * Preparation for oxygen and suction systems * 12V + 230V sockets * Roof hatch * External storage compartments * Rear wing doors with step * Side door with sliding window and step * Full perimeter work lights * Partition wall with sliding window * Intercom system * Driver’s cab with 2 seats * Air conditioning * Automatic transmission Laodpfx Anew Ip Eds Ueb * Electric windows * Electrically adjustable, heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Twin rear wheels * Body dimensions: L=3,650 x W=1,900 x H=1,980 mm * Wheelbase: 3,650 mm * GVW: 5,000 kg * Unladen weight: 4,355 kg * For sales to commercial customers and for export (non-EU and EU), German commercial code applies. If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish. Note: We offer and strongly recommend viewing and inspection of the goods, so that there are no misunderstandings regarding condition and suitability. Viewing and inspections are possible at any time by appointment and are expressly desired. All information is provided without guarantee. We accept no liability for errors or mistakes in this offer. The buyer is obliged to independently ensure the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: used, mileage: 289,192 km, power: 120 kW (163.15 HP), first registration: 04/2010, fuel type: diesel, empty load weight: 4,355 kg, maximum load weight: 645 kg, overall weight: 5,000 kg, axle configuration: 4x2, wheelbase: 3,650 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: steel-air, number of seats: 3, loading space length: 3,650 mm, loading space width: 1,900 mm, loading space height: 1,980 mm, Equipment: ABS, air conditioning, airbag, cabin, central locking, onboard computer, power assisted steering, * German vehicle * Stollenwerk stretcher available at additional cost * First hand * Air-suspended rear axle * Ambulance and rescue vehicle box body * Body by Fahrtec Systeme * Adjustable floating stretcher table * Wheelchair mount * Central locking system for patient compartment * KONVEKTA air conditioning * Stretcher wheelchair * 1 attendant seat * Refrigerated compartment * Warming cabinet * Sink * Medical cupboards * Pre-installed oxygen and suction system * 12V + 230V sockets * Roof hatch * External storage compartments * Rear wing doors with entry step * Side door with sliding window and entry step * All-round work lights * Partition wall with sliding window * Intercom system * Driver’s cab with 2 seats * Air conditioning * Automatic transmission * Electric windows * Electrically adjustable and heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Twin tires on rear axle * Body dimensions: L=3,650 x W=1,900 x H=1,980 mm * Wheelbase: 3,650 mm * Gross vehicle weight: 5,000 kg * Unladen weight: 4,355 kg * In case of sale to tradespeople or for export (EU and non-EU), German commercial law applies. If a new TÜV inspection is required, we will be happy to provide an offer from our partner workshops. Our offer is GENERALLY WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. Laedow H Dgzepfx An Uob You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to prevent misunderstandings about the condition and suitability for the buyer. Viewings and inspections are possible by appointment at any time and are expressly encouraged. All information provided is without guarantee. We do not accept liability for errors or incorrect information in the offer. The buyer is obliged to independently inspect the condition and specifications of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (max.): 36,000 rpm, spindle speed (min.): 12,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. Ledpfx Aex S Etmjn Ujab > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: used, Year of construction: 1980, hobbing length 1750 mm milling width 260 mm max. module 10 min. module 12 total power requirement 8 kW weight of the machine ca. 4500 kg dimensions of the machine ca. m D O N A U - K N A P P (Germany) Universal Automatic Rack Milling Machine Model UZFM – V 300 H Year approx. 1980 Serial No. 80-234x Max. length of rack 1,750 mm Milling travel / milling width cross max. 260 mm Module, steel / cast iron 10 / 12 Table clamping size 275 x 1,850 mm Mounting height below cutter, depending on cutter Ø 136 – 410 mm Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 160 mm Cutter width max. floating / with support 50 / 140 mm Cutter mandrel Ø max. 50 mm Milling spindle head, swivelling right / left 30 / 45 ° 9 spindle speeds 22 – 179 rpm Milling slide swivelling right / left 30 ° Feeds, infinitely variable (milling slide) 0 – 600 mm/min Quick return 2,000 mm/min Milling spindle drive approx. 4 kW Total electrical load 8 kW - 400 V - 50 Hz Weight 4,500 kg Ledpfx Anot Hxagj Ujab Accessories / Special Features: * Automatic milling cycle control via cam bloc mounted on milling slide and table slide with possibility of jump switching (= automatic by-pass of an area which should not be milled) and pendulum milling operation (= synchronized milling on the first half of table, and workpiece change on the second half. * hydraulic workpiece clamping device: 1.800 x 260 mm each, clamping width 140 mm, clamping height inside the device 60 mm, with own hydraulic aggregate, hand switch, * Manual fine adjustment of table (0.001 mm) for exact positioning in a pre-milled rackgear. * Various change gears (approx. 10 pieces). * 2 cutter mandrels. * Various other accessories. * Central lubrication. * Built-in hydraulic unit. * Simple Coolant device. Separate switch cabinet, various rack cutter up to 160 dia. This machine is especially suitable for milling racks, and also for manufacturing broaching tools (relief milling is possible by swivelling the cutter head). Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws Lodpjnygvrefx An Usab (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: used, MAIR Automatic packaging machine MPS RH150/D/4/SL & SIGNODE Automatic strapping unit M400 1. MAIR PACKAGING MACHINE, model MPS RH150/D/4/SL Model MPS RH150/D/4/SL Pat. automatically packs round tubes in hexagonal bundles. The Machine allows the strapping operation to be carried out automatically in a fix position, with the bundle moving sideways and stopping automatically at the programmed strapping positions. It is composed of: - Four tube lift chain conveyors with carrier teeth and intermittently driven for the lifting of one tube at a time, coming from the threading machine, to the aligning area; - One driven rollway to align the tube against an adjustable end-stop, before the row formation; - Two storage areas for the tube row; necessary during the bundle evacuation cycle; - One sturdy structure in welded structural steel, forming a bridge; - Tube row handling system which picks up a row of tubes at a time from the second row storage and places it down onto the bundle forming brackets. - Handling is performed by a series of electromagnets which perform a rotary movement during the row transfer cycle; - Four driven vertical brackets for bundle formation and holding. They are provided of adjustable blades according to the required bundle size and shape and they will be lowered in order to allow the bundle laying down on the evacuation trolley. - Driven evacuation trolley, sliding on rails fixed to the floor and equipped with lower driven rollers and pairs of retaining vertical loose rolls. - Driven flat conveyor to transport the bundle after the strapping area. - Driven storage chains suitable to approach bundles at the selected quantity. - Drainage station for bundle lifting, to allow the coolant outlet from tubes; it is equipped with two hydraulic devices driven by a hydraulic power pack. - Control switch cabinet. 2. SIGNODE AUTOMATIC STRAPPING STATION, model M400 The formed bundle is automatically transferred, by the driven rollers of the evacuation trolley, to the automatic Strapping Station. The bundle will be stopped at the programmed strapping positions to allow the automatic application of the steel strap. It is composed of: - SIGNODE automatic Strapping Machine Model M400/PA/TSM for vertical strapping, - Pneumatic strapping floating head for steel strap of 32 mm. width (1¼") and 0,9 mm. wall thickness; - 450 kg. jumbo coil dispenser with electrical unwinding; - Switchboard. 3. WEIGHING STATION Model KG8/DY The weighing station weighs tube bundles by means of load cells. Bundles are transferred by the driven storage chains to the weighing position. The Weighing Station is located under the pneumatic lifting devices which will lift the bundle in order to allow the weighing operation. It is composed of: - Bottom frame to be fixed to the floor, complete with four supports, linkages and loading cells. - Top holding frame, able to receive the bundle lifting devices. - Compact weight transmitter. 4. MANAGEMENT INFORMATION SYSTEM Model DATAPACK 3/T The Datapack Management System software allows the operator : - To control and monitor tube production in real time. Laodpeymahysfx An Usb - To set the a new bundle configuration with its strap application positions. - To store the various bundle configurations and strap application positions into an archive where they can be easily retrieved. - To create batches of different bundle configurations and then load them into one production sequence. - Monitor all alarm and fault messages (trouble...

Year of construction: 2021, condition: excellent (used), machine/vehicle number: 2108-2592, Holaras AS-10 knive topper for onions with 2 knives This 2 blade onion topper is specially designed for cutting of the tops of the onions or bulbs. By this knife topper the tails of the onions are not deducted, but they are cut by the rotory knives. Special vibrators with a targeted number of vibrations put the sieves with the onions on top in motion. Due to the high rotational speed and the special shape of the blades, a strong air is created. This air current sucks the tails through the sieves and cuts off just below the sieve. With extra knive, sieve and motors - Selfmade housing, which makes the machine a closed topper - Space between the bars of the sieves: 30 and 20 mm - Capacity 5 - 10 ton / hour Lajdpfxjx Hu Enj An Ueb When using the Holaras topping machines, the haulm is not pulled off, but cut of by fast rotating blades. This avoids damage because the blades do not touch the onions. The number of directed vibrations transmitted by specially designed vibrator-motors on the vibration-sieves is such that the onions move in a floating motion over the vibrationnsieves. The haulm (tops) is drawn through the openings into the sieves by a heavy airstream, downward, and then cut by the blades. The vibrator-sieves are easy to change. The vibrator-sieves are available for almost all types and sizes of onions and shallots. Seed onions, picklers, medium and ware-onions, shallots, are topped without difficulty by the Holaras topper without being damaged. It is important to use a sieve which is suitable for each kind of onion.

Condition: excellent (used), Edging line edger with optimization PAUL AB920 - in a warehouse - German production - DTR - optimization of the cutting width - cross cut saw - automatic disc spacing TECHNICAL PARAMETERS: - max. workpiece width 920 mm - max. workpiece height 90 mm - max. workpiece length 6000 mm - main engine power 37 kW - disc diameter max. 300 mm - spindle diameter 60 mm - sleeve diameter 70 mm Lajdpfx Asia Nypjn Ujb - fixed sleeve 60 mm long - floating sleeve for 1 disc - floating sleeve with a spindle 100 mm long - number of measuring heads 15 - spacing of measuring heads 350 mm - distance between the measuring heads - total feeder power 10 kW - cross-cut saw for cutting the material to a length of 2630 mm - saw leveling the material - cascade for transporting the board - hydraulic feed with smooth speed regulation - hydraulic material pressure - hydraulic material height adjustment

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 1,870 kg, lifting power: 700 kg/m, lifting height: 2,825 mm, tire size: 26 x 12.00 - 12, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, mast type: telescopic, digging bucket width: 120 mm, Year of construction: 2025, Equipment: additional headlights, head guard, standard shovel, trailer coupling, The H&R 1607T telehandler is our smallest loader with a cab. It is exceptionally maneuverable and can be used wherever space is limited. With a lifting capacity of 700 kg, the H&R 1607T telehandler lifts loads weighing up to 700 kg to a height of 2.82 m (bottom edge of the standard pallet fork). Thanks to the standard wide tires, it is very stable and safe. The new 3-cylinder Perkins Turbo engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With the 2-speed hydrostatic drive, the 1607 loader reaches a top speed of approximately 16 km/h and is comfortable to drive. The additional 3rd and 4th hydraulic control circuits allow for the use of various attachments. The hydraulic quick coupler allows for quick and convenient changing of front-mounted tools. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 1607T Skid Steer Loader • Fully equipped • Extensively optimized in Germany • Telescopic boom for extended reach • Ideal for tight work environments • Includes standard 120cm bucket and pallet forks • Comfortable cab with heating, ventilation, and radio (USB/MP3) • Hydraulic quick coupler • Joystick control with float position • Electric gear on the joystick • Auxiliary hydraulics for front-mounted tools • Hydraulic oil cooler • Rotating beacon • LED work lights front and rear • Wide tires 26 x 12.00-12 • Adjustable steering column • Hour meter and fuel gauge • Trailer hitch ball head • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €19,290.00 VAT: €3,665.10 Gross: €22,955.10 Financing available! Lodpfx Anjv Tabis Usab Optional 2-year warranty €595 TÜV (road approval) €870 Transport within Germany and Austria for an additional charge Please provide us with your address; we will be happy to provide you with a free, non-binding quote. Technical specifications Lifting capacity: 700 kg Lifting height: 2825 mm (bottom edge of standard pallet fork) Unloading height: 2383 mm (bottom edge of standard bucket tipped out) Lift time / Lowering time: 4.0 / 3.5 seconds Engine: Perkins 3-cylinder diesel Power: 25 HP Emissions class: Euro 5 Drive: Hydrostatic (PWG) All-wheel drive, speed approx. 16 km/h Dimensions: 2964 x 1160 x 2340 mm Weight: 1740 kg Standard tires: 26 x 12.00-12 Accessories and spare parts are not included. Available from us. Please provide your phone number when making inquiries!

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: hydrostat, fuel type: diesel, color: red, empty load weight: 2,150 kg, lifting power: 980 kg/m, lifting height: 2,500 mm, tire size: 31X15,5-15, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 1,500 mm, Year of construction: 2025, fuel: diesel, load capacity: 980 kg, Equipment: additional headlights, all wheel drive, cabin, differential lock, hydraulics, pallet forks, standard shovel, trailer coupling, The H&R 2210-B35 wheel loader (wide track) – a compact loader with a wide track for greater stability. The new 3-cylinder Perkins Turbo engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With its 2-stage hydrostatic drive, the 2210 B35 compact loader is fast and easy to drive at speeds of approximately 16 km/h. Thanks to the large steering angle of 42° and the small turning circle, it is ideal for use on small areas. The farm loader comes standard with pallet forks and a standard bucket, so you can start working immediately. The 3- and 4-way hydraulic control circuit allows for the use of various attachments. The hydraulic quick coupler allows for quick and convenient front-end tool changes. With its high lifting capacity, the HR 2210 loader can lift even heavy loads of up to 980 kg to a height of 2.53 m. Thanks to the standard 31x15.5-15 wide tires, it is particularly stable. The electric gear on the joystick makes operating the HR 2210-B35 particularly comfortable. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 2210-B35 Wheel Loader • Fully equipped • Wide track for greater stability • Extensively optimized in Germany • Includes manually adjustable pallet forks • Includes standard 150 cm bucket • Comfort cab with heating, ventilation, and radio • Rearview camera with display • Joystick with float position and electric gear • Auxiliary hydraulics for front-mounted implements, 3rd and 4th control circuits • Hydraulic oil cooler • Brake inching pedal • Trailer hitch for trailer use • Rotating beacon • LED work lights front and rear • Wide tires 31 x 15.5-15 • Adjustable steering column and seat • Hour meter and fuel gauge • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €22,945.00 VAT: €4,359.55 € Gross: €27,304.55 Financing available! Optional 2-year warranty €590 Ledpfx Ansrhh Sqs Ujab TÜV road approval / operating permit for work machine €595 Transport to Germany and Austria for an additional charge Technical specifications Engine: 3-cylinder Perkins Turbo (25 HP) Lifting capacity: 980 kg Lift height: 2530 mm (bottom edge of standard pallet fork) Unloading height: 1956 mm (standard bucket tipped) Lift time / lowering time: 4.0 / 3.5 seconds Dimensions: approx. 3380 x 1496 x 2340 mm Weight: 2160 kg Bucket width: 150 cm Tires: 31x15.5 -15 Spare parts and accessories are available from us. Please provide your telephone number when making inquiries!

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 1,740 kg, lifting height: 2,825 mm, tire size: 26 x 12.00 - 12, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, mast type: telescopic, Year of construction: 2025, Equipment: additional headlights, all wheel drive, cabin, head guard, hydraulics, standard shovel, The H&R 1507T telescopic wheel loader is our smallest telescopic yard loader – perfect for tight work spaces. With a lifting capacity of 700 kg, the H&R 1507T telescopic loader lifts loads of up to 700 kg to a height of 2.82 m. Thanks to the standard wide tires, it is very stable and safe. The new 3-cylinder Perkins engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With the 2-speed hydrostatic drive, the 1507T loader reaches speeds of approximately 16 km/h and is comfortable to drive. The additional hydraulic control circuit allows for the use of various attachments. The hydraulic quick coupler allows for quick and convenient changing of front-end tools. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machines have a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 1507T Telehandler • Technical and visual optimization in-house • Efficient engine made in Germany • Telescopic boom for greater reach • Ideal for tight work spaces • Includes standard 120cm bucket • Hydraulic quick coupler • Joystick control with float position • Electric gear on the joystick • Auxiliary hydraulics for front-mounted tools • Hydraulic oil cooler • Brake inching pedal • Open cab and safety bar with removable canopy • Rotating beacon • LED work lights front and rear • Wide tires 26 x 12.00-12 • Adjustable steering column and seat • Hour meter and fuel gauge • Trailer hitch ball head • CE compliant (EU Machinery Directive) and approved by the German Road Traffic Licensing Regulations (STVZO) • 1-year spare parts warranty Price Net: €17,710.00 VAT: €3,364.90 € Gross: €21,074.90 Lsdpfx Ajv T T N Tjn Uoab Financing available! Optional 2-year warranty €590 net Pallet fork €650 net TÜV (road approval) €870 net Transport to Germany / Austria upon request Technical specifications Lifting capacity: 700 kg Lift height: 2825 mm (bottom edge of standard pallet fork) Unloading height: 2383 mm (standard bucket tipped out) Lift time / Lowering time: 4.0 / 3.5 seconds Engine: 3-cylinder Perkins Power: 25 HP Emissions class: Euro 5 Drive: Hydrostatic (PWG) All-wheel drive, speed approx. 16 km/h Dimensions: 3805 x 1160 x 2235 mm Weight: 1740 kg Tires: 26 x 12.00-12 Turning radius: 4.3 m Accessories and Spare parts are available from us. Please provide your phone number when you inquire!

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 2,140 kg, lifting height: 2,530 mm, tire size: 31 x 15,5 -15, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 1,500 mm, Year of construction: 2025, Equipment: additional headlights, all wheel drive, hydraulics, standard shovel, trailer coupling, The H&R 2210-B35 wheel loader (wide track) – a compact loader with a wide track for greater stability. The new 3-cylinder Perkins Turbo engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With its 2-stage hydrostatic drive, the 2210 B35 compact loader is fast and easy to drive at speeds of approximately 16 km/h. Thanks to the large steering angle of 42° and the small turning circle, it is ideal for use on small areas. The farm loader comes standard with pallet forks and a standard bucket, so you can start working immediately. The 3- and 4-way hydraulic control circuit allows for the use of various attachments. The hydraulic quick coupler allows for quick and convenient front-end tool changes. With a high lifting capacity of 950 kg, the H&R 2010 loader can lift even heavy loads to a height of 2.53 m. Thanks to the standard 31x15.5-15 wide tires, it is particularly stable. The electric gear on the joystick makes operating the H&R 2010-B35 particularly comfortable. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 2010-B35 Farm Loader • Wide track for greater stability • Technically and visually optimized in-house • Manually adjustable pallet forks included • Standard 150 cm bucket included • Comfort cab with heating, ventilation, and radio • Joystick with float position and electric gear • Auxiliary hydraulics for front-mounted tools, 3rd and 4th control circuit • Trailer hitch for trailer use • Hydraulic oil cooler • Rotating beacon • LED work lights front and rear • Wide tires 31 x 15.5-15 Lajdpov Dachefx An Uob • Adjustable steering column • Hour meter and fuel gauge • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €21,672.00 VAT: €4,117.68 Gross: €25,789.68 € Financing available! Optional Road registration / operating permit: €595 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical specifications Engine: 3-cylinder Perkins Turbo (25 HP) Emissions class: Euro 5 Lifting capacity: 950 kg Lifting height: 2530 mm (bottom edge of standard pallet fork) Unloading height: 1956 mm Dimensions: approx. 3380 x 1496 x 2340 mm Weight: 2140 kg Speed: approx. 16 km/h Bucket width: 150 cm Standard tires: 31 x 15.5 - 15 Accessories and spare parts are in stock. Please provide us with your telephone number when making inquiries!