Used Flat Grinding Machine for sale (87,330)

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: C4656, grinding length: 4,100 mm, grinding width: 200 mm, Reform AR41 Type 7 C4656/91 Year of manufacture: 1991 Grinding length: 4100mm Grinding width: 200mm Workpiece height: 190mm Table clamping area: 4169x202mm Segment head diameter: 250mm Spindle diameter in the front. Bearing: 45mm Swivelling: 2° Max. torque: 2x45.8Nm 2x grinding motor 7.5kW Feed: 2000-35000 mm/min Max. speed: 1460 min/-1 Total power requirement: 30 kW Heidenhain digital display Additional grinding device ZS 7.5kW Swivelling clamping table via swivel gear Paper belt filter cleaning including pumps Central lubrication system Machine weight approx. 8.2t Bedpfxjtqtpps Abbolr Space requirement approx. 9.5x2.6x2m

Condition: excellent (used), The machine can be tested under power. Bedpfx Ajw Apg Sebbelr

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 812-98, Used precision, surface and profile grinding machine BRAND Technical data according to separate PDF Blsdju Hf Ekepfx Abber

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 66586, grinding length: 650 mm, grinding width: 323 mm, grinding height: 450 mm, table length: 600 mm, table load: 420 kg, table width: 400 mm, TECHNICAL DETAILS X-axis: 600 mm Z-axis: 450 mm Y-axis: 323 mm Magnetic clamping plate Type: Electro-permanent magnetic clamping plate Size: 600 x 400 mm Bledpfxjvw Su Ao Abbor Table load: 420 kg Area of application: High-precision machining Features: Electronic demagnetization and holding force coding Pole pitch: 18 mm (transverse parallel pole) Air hole set: 2 x 3 holes, central locking device Dressing system Type: Hydraulic straight dresser Automatic: Automatic dressing with compensation of the dressing amount, grinding wheel wear, intermediate dressing and grinding head reset MACHINE DETAILS Installation dimensions: 4,350 x 3,700 x 2,300 mm Machine dimensions: 3,425 x 2,263 mm Weight: 3,200 kg Connection power: 9.5 kVA EQUIPMENT - Microcomputer control group for magnetic clamping plate - Electro-permanent magnetic clamping plate (600 x 400 mm) with demagnetization and holding force coding - Belt filter machine SBF 30 Complete with 150 l tank, pump, supply lines, fittings and 1 roll of filter fleece - Replacement disk flange (Ø 127 mm). - Automatic dressing with hydraulic dresser

Condition: used, Year of construction: 1987, functionality: limited functionality, The machine is functional but has one defect. Year of manufacture: 1987 Bodpewcck Dsfx Abbjlr Remarks: - The price does NOT include any accessories! - Pickup by buyer, from the site. - Pickup date to be agreed upon by the seller. - No warranty. - Advance payment (invoice) or cash upon pickup.

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 1,500 mm, grinding width: 300 mm, total length: 3,000 mm, total width: 1,000 mm, grinding height: 150 mm, grinding wheel diameter: 300 mm, overall weight: 2,500 kg, grinding spindle motor power: 11 W, grinding wheel speed: 1,450 rpm, Equipment: documentation/manual, The GRAFS GRfix-1500e is a heavy-duty surface grinding machine designed for rough and high-performance grinding of steel plates. Developed and manufactured entirely in Poland, this model combines robust construction, long service life, and user-friendly electronic control. Bedpfx Aboxmhyijbjlr Main features: - Electromagnetic table 300×1500 mm, S-pole, holding force 120 N/cm² - Grinding motor 11 kW, high-quality Polish production - Segmented grinding wheel Ø300 mm, 6 aluminium oxide segments - Laser sensor for automatic workpiece height detection (as an additional option) - PLC control (Mitsubishi) with 7” HMI touchscreen – programmable grinding cycles (rough pass, automatic downfeed 0.001–0.05 mm, spark-out, pause, auto-stop) - Stepper motor feed with encoder for precise vertical adjustment - Mitsubishi inverter – variable carriage speed 1–16 m/min - Remote diagnostic support via Internet (Wi-Fi connection) - External coolant filtration system MS60 with rotary magnetic drum separator, 150 L tank, and 60 L/min pump - LED 24V working light and internal coolant pipe for table flushing - Powder-coated body: RAL7012 (frame) / RAL7021 (carriage) Mechanical design: - Extremely rigid welded steel body (10 mm thick plates, stress-relieved) - Carriage on PWTR precision rollers for smooth and silent motion - Replaceable hardened steel guide strips - Quick manual positioning of the carriage above the workpiece - Fast up/down movement of the spindle motor for easy tool change - Easy mounting system for the grinding wheel – only three bolts - Maximum workpiece height: 150 mm Optional equipment: - Accordion-type bellows covers - Alternative coolant filtration units (magnetic, paper, or combined) Advantages: - Perfect for rough surface grinding of large steel plates - Designed for high efficiency and long-term stability - Fully European components – Mitsubishi Electric control system - CE conformity, electrical inspection and Polish technical documentation (DTR) included Warranty: 12 months Technical data summary: Parameter Specification Grinding table: 300 × 1500 mm (electromagnetic, S-pole) Max. workpiece height: 150 mm Grinding wheel: Ø300 mm, 6 segments Spindle motor power: 11 kW Carriage speed: 1–16 m/min Downfeed: Automatic 0.001–0.05 mm Control system: PLC + 7” HMI Mitsubishi Coolant system: MS60 magnetic separator, 150 L tank, 60 L/min pump Weight: ~2800 kg (depending on configuration) Power supply: 400V / 50Hz Made in Poland The GRAFS GRfix-1500e is a professional surface grinder built for intensive, rough grinding applications where high metal removal rate and long-term precision are essential. A reliable, industrial-grade solution for steel fabrication shops, tool manufacturers, and service centers.

Condition: excellent (used), Very good surface grinding machine Table surface / working area 200 x 600 mm Technical description as attachment in PDF. Bedperbzahsfx Abbslr

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 1,000 mm, grinding width: 600 mm, total height: 420 mm, total length: 1,000 mm, total width: 500 mm, feed length X-axis: 1,400 mm, feed length Y-axis: 600 mm, feed length Z-axis: 550 mm, workpiece weight (max.): 880 kg, grinding height: 420 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, grinding wheel diameter: 400 mm, distance table to spindle center: 600 mm, table speed: 30,000 mm/min, table length: 1,000 mm, table load: 1,000 kg, type of input current: three-phase, table width: 500 mm, grinding wheel width: 100 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 5 rpm, overall weight: 7,280 kg, grinding spindle motor power: 11,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 2 m/min, rapid traverse Z-axis: 2 m/min, travel distance X-axis: 1,400 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 550 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 5 rpm, warranty duration: 12 months, space requirement height: 2,740 mm, space requirement length: 4,730 mm, space requirement width: 3,020 mm, Equipment: documentation/manual, rotational speed infinitely variable,  Easy-to-use Z-Control control system with high levels of comfort  Automatic vertical infeed with dressing amount compensation  Fully automatic grinding cycle with dressing cycles  Grinding cycles: • Surface grinding • Plunge grinding • Roughing / finishing / sparking  Extremely simple operation via touchscreen  Large, clearly arranged 10.4" color screen  Electronic handwheel, effective on the vertical and transverse axes, switchable in two steps to 0.001 and 0.01 mm  Sturdy cast construction of all machine components  High machine weight for maximum rigidity  Preloaded linear guide system in the vertical and transverse axes (Bosch Rexroth) for outstanding precision  Scraped double-V sliding guides in the X-axis ensure excellent damping properties and high Micrograph Quality  Hydraulic table drive with separate cooling unit to achieve good surface finishes  Electromechanical transverse and vertical movement  Direct measuring system in the vertical axis (Heidenhain) for precise positioning  Rotary pulse generator in the transverse axis  Maintenance-free belt filter system with 500-liter tank capacity and 3.5 bar pressure pump for effective cooling and rinsing  Integrated channel rinsing Bljdpowax I Hefx Abbsr  Upstream magnetic separator for pre-filtration  Power supply: 400 volts, 3 phases, 50 Hz  Grinding spindle separated from the motor by a coupling, thus no heat buildup  Continuously adjustable grinding spindle motor with constant cutting speed across the entire operating range of the grinding wheel (vconstant)  Roller-bearing mounted grinding spindle guarantees a long service life  2 machine lights in the work area (LED)  Table-mounted dressing device for high accuracy and surface quality with the option of accommodating three diamond dressing tools.  Electro-permanent magnetic chuck with integrated polarity reversal device and holding force adjustment, pole pitch p = 25 mm  Holding force adjustment in 16 steps  Magnetic chuck does not heat up, therefore highly precise  Automatic central lubrication in the x-axis (slideway oil)  Automatic central lubrication in the y + z-axes (grease)  Partially encapsulated machine with sliding door and front-mounted service door;  Effective splash protection with good accessibility  Machine prepared for connection to an emulsion mist extraction system; Connection nozzle  = 200 mm

Year of construction: 1994, condition: good (used), Ziersch & Baltrusch surface grinding machine - with Formmaster 6 / 30 - with belt filter unit - with coolant unit - width: 250 cm - depth: 200 cm - height: 220 cm Good condition fully functional can be viewed and tried on site. Shipping also abroad. Viewing : Basically, I would like to point out that to avoid misunderstandings, the item is welcome to be inspected and tested under power before purchase. Please ask questions before buying to avoid ambiguity. For general questions or to make an appointment for a viewing, I am, at the phone number below or above, always available. Errors in the description and subject to prior sale. Bodek Ixl Aepfx Abbslr VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: good (used), Year of construction: 1980, A well-preserved surface grinding machine by BLOHM, model HANSEAT 75, machine no.: 11985, year of manufacture: 1980, with coolant tank. Magnetic chuck: 800x500 mm. Bledpfx Aow Am Aksbbor

Condition: new, Year of construction: 2022, functionality: fully functional, grinding length: 450 mm, grinding width: 150 mm, feed rate X-axis: 25 m/min, distance table to spindle center: 450 mm, grinding wheel width: 13 mm, spindle speed (max.): 2,900 rpm, spindle speed (min.): 2,900 rpm, travel distance X-axis: 500 mm, travel distance Z-axis: 185 mm, grinding spindle speed: 2,900 rpm, warranty duration: 12 months, power: 1.5 kW (2.04 HP), input voltage: 400 V, Precision Surface Grinding Machine Metallkraft FSM 1545 With NC-controlled vertical feed Bodpfx Aow Az Hkjbbelr - For precision surface grinding applications - Maximum rigidity and stability thanks to stress-relieved, annealed, and hardened cast iron construction - High-quality spindle with precision taper roller bearings (runout accuracy 2 µm) - Electromagnetic clamping plate for securing the workpiece, including automatic demagnetization function - Automatic central lubrication for all slideways and spindles - Hand-scraped and Turcite-B-coated V-flat guides ensure exceptionally smooth, low-friction movement - Dust-tight halogen work lamp, fully touch-protected, and protected against water jets to IP65 - Second grinding wheel flange included in delivery Automatic Feed Control AD 5 Several grinding cycles are available: surface grinding with infeed at the starting point, slot grinding with infeed at the starting point, slot grinding with infeed at the start and end points. The infeed of the grinding wheel can be individually set depending on the workpiece. The total grinding allowance is divided into rough and fine increments; the feed steps can be freely set, with a minimum resolution of up to 0.001mm depending on the application. The option to program dead feeds after a certain number of infeed steps, as well as spark-out passes after the grinding measurement has been reached, ensures optimal grinding results. Technical Data: Dimensions and Weights Length (product) approx. 1900mm Width/Depth (product) approx. 1300mm Height (product) approx. 1700mm Net weight approx. 900kg Electrical Data Hydraulic pump motor power 0.75kW Drive motor power 1.5kW Supply voltage 400V Mains frequency 50Hz Spindle Spindle speed 2900min¯¹ Grinding Wheel Grinding wheel outer diameter 180mm Grinding wheel width 13mm Grinding wheel bore 31.7mm Surface Grinding Table Clamping area length 450mm Clamping area width 150mm Workpiece weight max. 140kg Max. distance spindle to surface grinding table 450mm X-axis Feed speed 5–25m/min X-axis travel 500mm Z-axis Travel 185mm The machine is a showroom model – new and comes with full warranty.

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1902038, grinding length: 1,000 mm, grinding width: 500 mm, total height: 400 mm, The machine is working perfectly, currently the system is not in operation. Bjdpfjvyf H Rex Abbolr

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, grinding length: 400 mm, total height: 525 mm, feed length X-axis: 400 mm, feed length Y-axis: 525 mm, rotational speed (max.): 1,400 rpm, We offer for sale a precision surface grinder from the renowned GEIBEL & HOTZ brand, model FS 640 SD. Technical parameters: • Table working surface: 600 x 400 mm • Maximum table load: 600 kg • Year of manufacture 2015 • Grinding wheel: Ø 300 mm x 50 mm, bore 76.2 mm • Spindle speed: up to 1400 rpm Bjdswbixxjpfx Abbslr • Feed speed in the X axis: 5 – 35,000 mm/min • Feed ranges: o Z axis (transverse): up to 400 mm o Y axis (vertical): 140 – 525 mm Equipment and additional features: • Electromechanical table drive • Comfort Control Panel SD control panel • Automatic lubrication system • Stable and low-vibration cast construction

Condition: used, Year of construction: 1980, Surface grinding machine Jung automatic feed Speed continuously adjustable Bledpfxjv Icqio Abber Feed continuously adjustable Electrics defective

Condition: good (used), Year of construction: 2005, functionality: fully functional, ABAMATIC control system Grinding length 1700 mm Grinding width 750 mm Blsdpfx Aewtgc Esbber Wheel vertical movement 700 mm Wheel dimensions D400 x 100 x d127 mm Balancing device Auxiliary hydraulic system Coolant system Magnetic plate 1500 x 700 mm Grinding wheel mounted with flange

Condition: ready for operation (used), Sanding length 800 mm Sanding width 350 mm Sanding height 350 mm Total power requirement approx. 5.5 kW Automatic depth feed Blsdju Aht Njpfx Abbjr Automatic cross feed Machine weight approx. 2,600 kg

Condition: good (used), Year of construction: 1991, Two units available Blodpfx Aem Ndm Sebbsr Currently still in use Can be tested Table 1000x400 Increased accuracy, automatic feed

Condition: good (used), Year of construction: 1995, Table work area : 850×400 mm Table travel distance : 950×440 mm Distance table top to wheel bottom : 47.5 – 547.5 mm Standard chuck size : 800×400×105 mm Max workpiece weight : 700 kg (230 kg sur plateau magnétique) T-Slots (W×No.) : 17×3 Longitudinal feedrate : 3 – 25 mm/min Crosswise feedrate : 1 – 1000 mm/min Bodpfjwuglisx Abbslr Vertical feedrate : 1 – 1000 mm/min Min input increment (vertical) : 0.0002 mm Grinding wheel O.D.×W×I.D. : 355×38×127 mm Grinding wheel speed : 1500/1800 r.p.m. Wheel spindle drive motor : 3.7 / 4 kW Vertical feed motor : 0.3 kW Cross feed motor : 0.3 kW Hydraulic pump motor : 2.2 / 4 kW Air-cooled oil cooler motor : 90 / 105 W Floor space (L×W×H) : 3310×2228×2713 mm Machine weight : 4000 kg Specifications are subject to change at any time without prior notice. No liability shall be assumed for errors or omissions.

Condition: good (used), Year of construction: 2004, DGT Plus control system (Siemens basis) Sanding length 2400 mm Sanding width 1290 mm Sanding height 700 mm Magnetic table 2000 x 1100 mm Max. Table load capacity 5000 kg Grinding wheel width 150 mm Sanding spindle speed 960 rpm Bsdpfjvg Sifjx Abbjlr Machine weight approx. 30 tons

Condition: good (used), Year of construction: 1997, Max. sanding length 1,400 mm Max. sanding width 610 mm Max. sanding height 550 mm Max. longitudinal stroke 1,480 mm Max. cross stroke 560 mm Infinitely variable table speed 1 - 30 m/min Bedpfxsr A Evrj Abbelr Grinding wheel size 406 x 51 x 172 mm Max. table load 1,800 kg Total power supply 20 kW Machine weight approx. 6,500 kg

Condition: used, Grinding length 600 mm Grinding width 350 mm Magnet size 600 x 200 mm Workpiece height 450 mm Table speed 1 - 30 m/min Feed automatic 1 - 60 (transverse) mm/stroke Blodpfjvk T Scjx Abbor Rapid traverse (transverse) 1.2 mm/min Machine weight approx. 2,450 kg

Year of construction: 1998, condition: good (used), CHEVALIER FSG 1640 AD SURFACE GRINDING MACHINE MAKE CHEVALIER, MADE IN TAIWAN MODEL FSG-1640 AD YEAR 1998 TABLE SIZE 1000 x 400 mm GRINDING WHEEL SIZE 445 mm TRAVERSES 400 x 1000 mm MAX HEIGHT FROM TABLE TO SPINDLE CENTRE 445.0 mm TOTAL POWER REQUIRMENT 7.4 kW PLUS Blodpfx Aeirfpgobber AUTOMATIC DOWN FEED WHEEL-MOUNTED WHEEL DRESSER SYSTEM HYDRAULIC MOVEMENT COOLANT SYSTEM 400.0 x 1000.0 mm ELECTRO MAGNETIC CHUCK MACHINE MANUALS

Condition: good (used), Year of construction: 2015, operating hours: 250 h, functionality: fully functional, For Sale: Guideway Grinding Machine (Retrofitted from Metal Planing Machine) We offer a robust guideway grinding machine, which has been professionally converted from an original metal planing machine. The main advantage lies in its relatively compact footprint in relation to the workpiece capacity. Technical Specifications: Bsdsxx Uudopfx Abbelr • External dimensions (LxWxH): 4,800 x 2,500 x 2,000 mm • Required floor space: 4,800 x 3,500 x 2,700 mm (+ control cabinet, coolant tank, access) • Table size: 2,000 x 800 mm • Distance between columns: 1,000 mm • Travel paths (X/Y/Z): 2,000 / 1,000 / 600 mm Upgrades & Features: • New ball screw spindles and bearings • 2 new motors + 2 overhauled motors • 3 new frequency inverters • New Siemens SINUMERIK 802C baseline CNC system • Large grinding spindle: 2,840 rpm – refurbished + new motor • Small grinding spindle: 18,000 rpm – refurbished • Including control cabinet, coolant tank with pump, and separate, wall-mounted inverter for small spindle Inspection and trial run possible by appointment. Please contact us for more information.

Condition: as good as new (ex-display), functionality: fully functional, Table size 540 x 250 mm Max table travel 560 x 260 mm Max distance from table to spindle center 450 mm Table slide-way Double-V rail Feed of cross handwheel, per revolution 5 mm Feed of cross handwheel, pe graduation 0,02 mm Feed of vertical handwheel per revolution 1,25 mm Feed of vertical handwheel per graduation 0,01 mm Wheel speed (50 Hz) 2850 rpm Wheel speed (60 Hz) 3440 rpm Wheel size 200x31,75x20 mm Power of spindle motor 1500 W Hydraulic station motor 1500 W Working pressure 3 Mpa Max runoff 18 L/min Fuel tank capacity 80 L Coolant pump 40 W Machine's net weight 900 kg Size 1,80x1,40x1,80 m Robust and reliable construction. Zero working hours Price should remain the same till end of December. Bedpfx Abeu Hzg Robslr

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Bjdpfxjxdmgve Abbjlr Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm