Used Flat Grinding Machine for sale (67,074)

Condition: good (used), 1 used surface grinding machine Hodpfx Ajw Suyhol Tenr Manufacturer: Geibel und Hotz Model: FS 50 Optimus SA Technical data Design: Hydraulic Maximum distance between table and spindle center: 400 mm Longitudinal travel (X-axis): 580 mm Cross travel (Y-axis): 250 mm Table speed: Infinitely variable from: 2 m/min up to: 28 m/min Automatic vertical feed: Grinding wheel speed: from: 2800 rpm Connection 50 Hz 3-phase: 400 Volt Grinding spindle motor: 2.2 kW Total power requirement: 7 kW Machine weight approx.: 2000 kg Machine dimensions: Length: 1800 mm Width: 1200 mm Height: 2250 mm

Condition: good (used), 1 used surface grinding machine Manufacturer: Jung Model: HF 50 Technical specifications: - Z-axis travel: 400mm - X-axis travel: 500mm - Y-axis travel: 200mm - Table length: 720mm - Maximum spindle speed: 4000rpm - Table width: 200mm - Minimum spindle speed: 1000rpm - Transport dimensions: 2300mm x 1500mm x 1700mm (L x W x H) - Transport weight: 2000kg Equipped with: - Digital readout - Diaform device Hnjdpfx Aljxgbb Ts Ter

Condition: used, Cup Surface Grinding Machine / Cylinder Head Grinding Machine Max. grinding area: 835 x 200 mm Electromagnetic clamping plate: 500 x 200 mm Hjdpswlbz Tsfx Al Tonr Machine dimensions (L x W x H): 2070 x 900 x 1600 mm Machine weight: 1000 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 1990, Hydraulic surface grinding machine with automatic vertical feed Max. grinding length 670 mm Max. grinding width 280 mm Max. grinding height 400 mm Table speed, longitudinal 2 – 35 m/min Table speed, transverse 0.3 – 40 mm/stroke Rapid traverse Yes Grinding wheel dimensions 300 / 76 x 40 mm Drive power 4 kW Machine dimensions L x W x H 2000 x 1850 x 2000 mm Machine weight 2300 kg Hydraulic and electrical system dimensions L x W x H 1200 x 800 x 2000 mm Hydraulic and electrical system weight 650 kg Accessories / Special features: • Permanent magnet clamping plate 630 x 200 mm • Automatic vertical feed with digital display • Manual dressing device • Coolant system • Separate hydraulic unit • Grinding wheel • Machine alignment elements Note: o Hydraulic cylinder for table travel newly sealed o New filters in the hydraulic unit o Handwheel adjustment for transverse travel newly fitted with bearings Hodpsf Um Rasfx Al Tsnr Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, Surface grinding machine Manufacturer: METALLKRAFT Model: FSM 2550 Condition: New machine with warranty Technical data: Hedpfxjd Rhpqs Al Tenr Table size (magnetic plate): 250 x 500mm Maximum grinding surface: 265 x 540mm Maximum distance spindle-table: 500mm Handwheel graduation for the Z-axis: 0.02mm (5mm per revolution) Automatic feed rate Z-axis: 0.5 – 20mm Handwheel graduation for the Y-axis: 0.01mm (2mm per revolution) Spindle speed: 2900 RPM Spindle motor power: 1.5 kW / 400V Hydraulic unit motor power: 0.75 kW / 400V Feed rate X-axis: 5 – 25m/min Crossfeed motor (Z): 0.15 kW / 400V Rapid traverse speed Y-axis: 250mm/min Maximum grinding wheel diameter: 205 x 20 x 31.7mm Dimensions: 2250 x 1400 x 1800mm Weight: 1350.00kg (net) Standard equipment: massive and stress-relieved machine body made of gray cast iron X and Z axes with V- and flat guides and high-quality Turcite-B guide rails Spindle with class P4 tapered roller bearings guarantees a runout accuracy of 2μ manual adjustment in all axes via large handwheels with vernier scale electromagnetic clamping plate including automatic demagnetization function automatic, motorized feed in the cross axis (Z) Control of the feed in the Z-axis via two potentiometers (coarse feed / fine feed) End position detection in the Z-axis via adjustable end stops automatic, hydraulic feed in the longitudinal axis (X) with adjustable stroke Control of the feed rate in the X-axis via manual hydraulic valve Control panel mounted on the right side of the machine body automatic central lubrication of all guide rails painting in RAL 5017 and RAL 7035 operating manual with CE declaration of conformity Scope of delivery: Grinding wheel flange manual balancing device Balancing mandrel Parallel dressing device with diamond dressing tool Halogen work light IP65 Adjustable feet and operating tools Standard grinding wheel (180 x 13 x 31.7mm) Grinding wheels from 7 to 20 mm can be used Vertical feed control AD5: Selection of operating mode for vertical feed (Rapid traverse / Feed / Fine adjustment in steps) Selection of operating mode for the grinding process (Manual / Semi-automatic / Automatic) Selection of grinding type (Surface grinding / Plunge grinding) Switching on/off of the retraction function at the end of the cycle Switching on/off of the automatic shutdown function at the end of the cycle Numerical input field with digital display for: Total grinding dimension, fine feed dimension, Retraction, coarse feed adjustment, fine feed adjustment Number of increments, number of idle strokes and finishing strokes, Adjustment value for incremental fine adjustment

Condition: reconditioned (used), Year of construction: 1995, Surface grinding machine Manufacturer: Geibel & Hotz Model: FS 40 Compact Year of manufacture: 1995 – partially overhauled, newly painted RAL 7035 light gray / RAL 7012 basalt gray Machine No. 9200895 with warranty Accessories: - Electro-magnetic clamping plate 400 x 200 mm (pole spacing: 5 mm) - Wet grinding system - Automatic vertical feed with digital display for vertical and transverse movement - Fine adjustment on the cross-slide handwheel Hnjdpfxod Rl Nqo Al Tsr - Grinding wheel with flange - Central lubrication system - Manual dresser with dressing diamond - Transverse speed control, stepless - Operating manual - used, as is -

Year of construction: 1960, condition: used, Surface grinder with magnetic chuck, 250 x 135 mm. 400 Volt, power consumption 1.8 kW. Hjdpfeiuz Tgex Al Tjnr

Condition: good (used), Year of construction: 1960, Aba surface grinder no. 3261 15000kg power 2,55 kw size FF625 condition very good Hnedpfjt T Ri Tex Al Tor

Condition: ready for operation (used), machine/vehicle number: 4105, Grinding area: approx. 130 x 255 mm Grinding speed: 2800 rpm Table size: 150 x 300 mm Drive motor: 380 V, 1.5 kW Required space: 750 x 700 x 1700 mm Weight: about 380 kg Hedpfxsh Ugwvj Al Tonr Cup wheel Ø: 180 mm

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 19631, grinding length: 1,500 mm, grinding width: 900 mm, grinding spindle speed: 1,000 rpm, controller manufacturer: Siemens, workpiece height (max.): 690 mm, The machine was completely overhauled and modernized in 2009 & 2023. In 2023, the X-axis, including the drive, was refurbished and new magnetic plates were installed! TECHNICAL DETAILS Grinding width: 900 mm Grinding length: 1,500 mm Grinding area: 1,500 x 900 mm Workpiece height: 690 mm Table size: 1,800 x 900 mm Longitudinal table speed: 4 - 36 m/min Cross table speed: 1 - 60 m/min Grinding wheel dimensions: 500 x 100 x 203 mm Grinding spindle speed: 1,000 rpm MACHINE DETAILS Control system: Siemens Electrical Data Voltage: 400 V Total drive power: 80 kW Grinding spindle drive: 28 kW Machine weight: approx. 17 t Hnjdpfxox Dcfbs Al Ter EQUIPMENT Coolant system Dressing device Automatic vertical feed

Year of construction: 1979, condition: good (used), Flat grinding machine make Brand Type: Compact 600/800 with Heidenhain control We do not have any further technical data. Hnedpfx Alsy H Ibio Tjr

Condition: not inspected (used), Kenward surface grinding machine Offered here is a surface grinding machine from the company Kenward. Technical data: grinding type: horizontal peripheral grinding max. grinding length: 300mm Hjdpfehg Nh Eox Al Tsnr max. grinding width: 100mm grinding wheels: Ø 120mm adjustment Z = 100mm 380 / 440 Volt 50 Hz 2850 rpm

Condition: good (used), Year of construction: 1991, Technical data - Table surface: 800 x 450 [mm] - Grinding surface: 800 x 500 [mm] - Max. distance between table surface and spindle: 650 [mm] - Max. weight on the table: 400 [mm] - Spindle speed: 1400/1700 [tr/min] - Dimensions of the grinding wheels: 350 x 127 x 50 [mm] - Dimensions of the machine: 3350 x 2100 x 1750 [mm] - Weight: 2900 [kg] Hedpevx E Rtjfx Al Tonr

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 4,800 kg, ELB Perfekt 8 SPS, year of manufacture 1998, grinding area 800 x 400 mm, grinding wheel 300 x 50 mm, 4.3 kW spindle power, SPS control for automatic grinding cycle (roughing, finishing, sparking out, lifting), dresser mounted on spindle head with compensation. The machine is currently being overhauled by us: the grinding spindle is being newly fitted with bearings, the guideways are being hand-scraped. After the overhaul, the machine will meet the geometry of a new machine and is thus immediately ready for operation. Accessories: electro-permanent magnetic chuck 800 x 400 mm, water tank with automatic paper filter, partial enclosure. All functions are tested, and the machine can be demonstrated under power at our facility. We are also happy to handle installation and on-site training. Financing/leasing is no problem; we’d be happy to provide an offer! Hnedpjrpz Evsfx Al Tsr

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, grinding length: 600 mm, grinding width: 400 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 3,600 kg, ELB Perfekt 6, year of manufacture 2002, grinding area 600 x 400 mm, grinding wheel 300 x 50 mm, 4 kW spindle power, automatic grinding cycle, roughing, finishing, spark-out, lifting, dresser mounted on spindle head with compensation. The machine has been professionally overhauled by us and now meets the geometry of a new machine. The grinding spindle has new bearings. Accessories: electro-permanent magnetic clamping plate 600 x 400 mm, water tank with paper filter unit. All functions have been tested and the machine can be demonstrated under power at our facility. We are also happy to handle on-site installation and training, as well as future servicing. Financing/leasing is available; we will be pleased to provide an offer! Hsdpfxoxdalfe Al Tjnr

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, grinding length: 500 mm, grinding width: 400 mm, ELB Smart Line S 5 STC, year of manufacture 2008, grinding area X/Y/Z: 500mm/400mm/475mm, grinding wheel dimensions: 300mm/50mm/76.2mm, table speed up to: 30m/min, max. table load: 400kg, spindle taper: 36mm, control: Siemens STC, magnetic chuck 500 x 250 mm (can be enlarged), incl. coolant tank with paper filter system, grinding spindle with new bearings, all functions checked, in very good condition. The machine can be inspected under power at our facility; test grinding is also possible. We are happy to handle installation/training at your site as well as ongoing service in the future. Hnsdpfsr D R I Sjx Al Tor

Condition: new, Year of construction: 2026, grinding length: 700 mm, grinding width: 400 mm, COSMOS E 7040 NC Precision Surface Grinding Machine, grinding area 700 x 400 x 350 mm, spindle power 3.7 kW, grinding wheel 300 x 50 x 76.2 mm, Mitsubishi PLC control and drive technology, very user-friendly, incl. magnetic chuck 700 x 400 mm with adjustable holding force, grinding spindle with speed regulation, automatic grinding cycle with rough grinding, fine grinding, spark-out and retraction, dressing with size compensation, coolant system with paper band filter. 12 months warranty. Inspection under power and test grinding possible at any time. We are happy to provide on-site installation and training as well as subsequent service! Financing / leasing available upon request – we will gladly provide an offer! Hnedpfx Alerwwt Ss Tjr

Condition: new, Year of construction: 2026, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, COSMOS SG 840 NC Precision Surface Grinding Machine, grinding area 800 x 400 x 350 mm, spindle power 3.7 kW, grinding wheel 300 x 50 x 76.2 mm, Mitsubishi PLC control and drive technology, highly user-friendly, incl. magnetic chuck 800 x 400 mm with variable holding force, grinding spindle with speed regulation, automatic grinding cycle with rough grinding, finish grinding, spark-out and lift-off, dressing with size compensation, coolant system with paper band filter. 12 months warranty. Inspection under power and test grinding possible at any time. We are happy to handle installation / on-site training, as well as future service! Financing / leasing available, we will gladly provide you with an offer! Hedpfxew Ifdcj Al Tsnr

Condition: used, Surface grinding machine, precision surface grinding machine BRAND (Switzerland) Type Mini 500 Machine No.: 505/86 Year of manufacture: 1986 Electro-magnetic clamping table 450 x 200 mm Grinding length 500 mm Grinding width 240 mm Cross travel 220 mm Table longitudinal travel 550 mm Distance between spindle center and magnet max. 350 mm Grinding wheel diameter 225 mm Grinding wheel width max. 25 mm Grinding wheel bore 50.8 mm Table longitudinal feed 0.5-24 m/min, stepless Table cross feed, pulse 0.05-30 mm Cross feed rate 10 - 1000 mm/min Vertical feed 0.001 - 0.05 mm Vertical feed rate 600 mm/min Grinding wheel speed 2820 rpm Grinding wheel speed 33 m/s Motor power, grinding spindle 2.2 kW Motor power, hydraulics 1.1 kW Mains connection 400 V, 50 Hz, 9.5 kVA - automatic depth feed, vertical feed - mechanical handwheels for axis movements - hydraulic table longitudinal movement - electromagnetic plate WAGNER 450 x 200 mm, height 73 mm - central lubrication system - band filter system with coolant tank and pump, adjacent, L x W x H = 1300 x 500 x 650 mm - 2 additional grinding wheel arbors for grinding wheels with 50.8 mm inner diameter - 1 balancing mandrel and 1 grinding wheel puller - adjacent hydraulic unit, L x W x H = 700 x 300 x 750 mm Space requirement L x W x H 2000 x 1400 x 2250 mm Weight approx. 1600 kg Hnoded Nrqfspfx Al Tjr Good condition

Condition: used, functionality: unexamined, For sale is an HK Orion (Hahn+Kolb) surface grinding machine. The machine is in age-appropriate condition, has not been tested, and is being sold as is. Our service promise: We prioritize quality, expertise, and customer satisfaction. Our team consists of qualified and experienced technicians specializing in Mazak machines as well as other machinery. We place great emphasis on personal support and are happy to assist you even after your purchase. With us, you are in the best hands – professional, reliable, and passionate about machinery! Hnjdpfx Ajxyyqyol Tjr PS CNC Service Germany GmbH & Co. KG All information is provided without guarantee.

Condition: new, Bernardo BSG 2040 PLC Surface Grinding Machine Technical Specifications Table surface area 200 x 500 mm Number/width of T-slots 1 / 14 mm Electro-magnetic clamping plate 200 x 460 mm Max. travel, longitudinal 560 mm Max. travel, transverse 240 mm Distance spindle center / table max. 450 mm Max. workpiece weight* 180 kg Grinding wheel 200 x 20 x 31.75 mm Table speed, hydraulic 7 - 25 m/min Transverse feed Automatic feed, transverse 0.1 - 8 mm / stroke Rapid traverse, transverse 990 mm/min Transverse feed per handwheel revolution 4 mm/rev Scale division on handwheel 0.02 mm Vertical feed Automatic feed, vertical 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm Rapid traverse, vertical 480 mm/min Vertical feed per handwheel revolution 2 mm/rev Scale division on handwheel 0.005 mm Grinding spindle motor 2.2 kW Spindle speed 2850 rpm Hydraulic pump motor 0.75 kW Vertical feed motor 0.5 kW Length 2160 mm Depth 1650 mm Height 1840 mm Weight approx. 1640 kg * with magnetic clamping plate Scope of supply • 2-axis digital display ES-12 H with LCD display • Siemens SMART panel IE V3 with touch operation • Electronic handwheel • Grinding wheel • Wheel flange Hnedpfx Alsgd Ia So Tjr • LED work light • Magnetic clamping plate • Balancing stand • Balancing arbour with protective covers • Parallel skimming device • Demagnetization device • Coolant system • Skimming diamond • Machine feet • Central lubrication • Operating tools

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 15135, grinding length: 800 mm, grinding width: 600 mm, grinding height: 500 mm, grinding wheel diameter: 400 mm, control type: NC control, TECHNICAL DETAILS Control: NC Ergomatic Grinding length: 800 mm Grinding width: 600 mm Grinding height: 500 mm Grinding wheel diameter: 400 mm EQUIPMENT Electromagnetic chuck Coolant purification system Hnedpfoxl Sifjx Al Tor

Condition: good (used), Year of construction: 1988, grinding length: 1,000 mm, grinding width: 550 mm, grinding height: 400 mm, grinding wheel diameter: 400 mm, grinding wheel width: 100 mm, Manufacturer: ELB-SCHLIFF Model: SWBE 010 ND Hjdeu Rqynjpfx Al Tjnr Year of manufacture: 12-1988 Delivery time: immediately Electro-permanent magnetic clamping plate SAV 1000 X 400 mm Fine pole pitch 45-5 mm Electric straightening device with compensation Digital display vertical Holder with grinding wheel max. 400 X 100 X 127 mm Spindle motor 7.5 KW 1435 min/1 Setting wedges Coolant system with universal paper belt filter Complete documentation

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: 7570, 1 used: JUNG Surface and Profile Grinding Machine • Model: HF 50-R(D) • Machine No.: 7570 • Year of manufacture: approx. 1977, overhauled 06-1998 • Grinding area: 500 x 200 mm • Grinding wheel: max. 250 x 25 x 51 mm EQUIPMENT: Electro-magnetic chuck 450 x 180 mm 1 straight dresser mounted on the side of the spindle head 1 grinding wheel holder with wheel 1 universal paper band filter 1 frequency converter for speed control Leveling feet Hnsdpsw R Tqpjfx Al Tsr

Condition: excellent (used), Year of construction: 1997, DETAILS PRECISION SURFACE GRINDING MACHINE Manufacturer: JUNG Model: JF 520 Year of manufacture: 1997 Machine weight: 2200 kg Total weight: 2600 kg Location: Haiger Price: €24,000 excl. VAT Description: Hsdpfx Aoxqa I Tol Tonr Serial no.: 3821, Digital readout, manufacturer Heidenhain, microprocessor control, profile dressing device, manufacturer Diaform, machine lighting, coolant system, magnetic clamping table. Technical Data: Clamping surface (L x W in mm): 600 x 200 Grindable area (L x W in mm): 600 x 250 Max. magnet size mm: 600 x 200 Max. grinding wheel dimensions (mm): 225 x 25 x 51 Distance table/spindle center (mm): 350 (+50) Table longitudinal feed reciprocating (m/min): 1 – 20 Creep feed (mm/min): 0 – 500 Grinding spindle drive speed (rpm): 800 – 4200 Power kW (with creep feed): 2.2 (3.5)