Used Flame Spray Gun for sale (3,042)

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Rbodpfxjwc Nvge Acvjw Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in steady state according to IEC 60068-3-5 dependent on the test chamber temperature over time ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the insert grid Water level = 0 mm The water level is at the top edge of the insert grid Data for standard spray device Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume of additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-temperature control Volume: approx. 2000 l Temperature range for pre-temperature control +5°C to +40°C Temperature change duration Cooling of +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Installation and Operation Data: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Plug-ins 1 50 mm diameter plug installed on the left Test chamber capacity: approx. 500 liters Refrigerant R-404a Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 26 kW Nominal current approx. 44.0 A (neutral conductor loaded) Fuse protection 63 A gG, on-site Weight approx. 890 kg net For your safety, please note the following information! The following steps are carried out on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a Mega Electronics conveyor spray processing machine. Mega Electronics Conveyor Spray Processing Machines Conveyor spray processing machines FAPC 3000 The new FAPC have been developed to be used with the latest development, Etching and abating chemistry for the production of printed circuits, metal signs and chemically milled metal components. The FAPC 3000 can accommodate panels up to 300 mm wide. Process chamber 450mm Water rinsing chamber 280mm Spray rods - Top 4 process chamber, 1 rinsing chamber Spray rods - floor 4 process chamber, 1 rinsing chamber Nozzle type Poly v-jet - 1/4 revolution removable Nozzles per pipe 3 + 4 for process, 4 for rinsing Nozzles Precisely mounted for perfect alignment. Adjustable, compact distribution systems. Flow control / pressure control Adjustable over the entire range from above and below. Conveyor speed control High torque. AC drive motor system, powered by a precision inverter with digital displays, for a precise operator reference Speed range 45 mm - 1.6 m / min Temperature range Ambient temperature up to 50°C -1°C Temperature Controller Digital Liquid level sensors For heating and pump Manual reset of overtemperature protection Voltage 220 / 240V 50Hz (13A plug) Dimensions: Height 670mm Depth 670 mm Length 1430mm including collecting bowl Type: FAPC 3000 Condition: used / used Scope of delivery: (See picture) Rodpfx Acsd R Trksvsbw (Changes and Ir

Condition: excellent (used), White Type: SC/KWT 450 Salt Spray Chamber Technical Specifications: Test chamber capacity: 450 liters Max. load: 100 kg Brine storage tank: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Areas of application: Corrosion tests: Salt spray test: Room temperature up to +50°C Condensation test: Room temperature Up to +45°C Humidifier +75°C Temperature stability The temperature deviation over time is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rbsdpfx Aow Strcscvsw Rated power 2.0 kW, Rated current 8.7 A Combination: Salt spray test SS: DIN 50021 Condensation test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Köhler Type: HKS 1500 The Köhler HKS 1500 salt spray chamber is an industrial testing device designed for corrosion testing according to international standards such as ISO 9227 (NSS, AASS, CASS). It is primarily used in the automotive and metalworking industries to test the resistance of materials and coatings to corrosive environments. Technical Features Model: Köhler HKS 1500 Test Volume: Approx. 1000 liters Chamber Type: Front- or Top-Loading Rbsdjwit Erjpfx Acvew Control: Touch panel for easy operation Temperature Range: Room temperature to approx. 50 °C Materials: Corrosion-resistant interior lining, e.g. B. Polypropylene Standards: DIN EN ISO 9227, VDA 233-102, DIN EN ISO 11997-3 This chamber enables both conventional salt spray tests and cyclic corrosion tests and can be individually adapted to specific testing requirements. Technical specifications for the salt spray cabinet: Test chamber material: Polypropylene RT - + 55°C Test chamber temperature range/salt spraying Heating/salt spraying indirectly via chamber walls Temperature range - condensate RT - + 50°C Temperature range - humidifier RT - + 75°C Heating indirectly via the test chamber walls. Temperature stability +/- 1.0 K Digital temperature control, resolution 0.1 °C (on plain text display) Digital control, heating circuit via electronic relay without power disturbances Saline supply: approx. 200 hours of continuous spraying or external Saline supply: automatic humidifier filling Fog generation: dual-fluid nozzle made of acrylic glass Air flow rate: 3.0 m³/h Precipitation rate controlled by electronic dosing pump Dimensions: Inside: Width 1030 mm, Depth 880 mm, Height 1100 mm Outside: Width 1200 mm, Depth 1000 mm, Height 2080 mm Electrical connection: Nominal voltage: 400V 3P/N 50Hz Pmax: 9800W Connected load: 3.0 KVA (salt spraying) (condensation) 2.0 KVA Compressed air connection Min. 4.5 bar, max. 8.0 bar Water connection (deionized water): Min. 2.0 bar, max. 6.0 bar Disposal: Mist outlet NW 32, Condensate outlet NW 32 Weight: 450 kg Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you RIVSET self-pierce rivet system. with punch riveter operating voltage: 400V 50 Hz rated current: 12A Main fuse: 35 A control voltage: 24 V signal voltage: 0-10 V with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 max. permissible rivet setting pressure: 250 bar max. permissible rivet setting force: 78 kN weight of the tongs: approx. 279 kg Rsdpfspfcx Sox Acvebw year of manufacture: 2012 Type: 9524-640-824-5 The system was for inspection at the manufacturer and is functional. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a Köhler salt spray chamber. Salt spray chambers: diverse testing possibilities from salt spray test to fully automatic alternating test easy operation by graphical menu guidance customized versions for many applications easy operation via touch panel internal dimensions W x D x H (without hood) 1080 x 675 x 580 mm external dimensions W x D x H 1940 x 900 x 1220 mm Test chamber capacity 500 liters Chamber temperature Rt +5 - 60°C Humidifier temperature Rt +5 - 75°C Mains connection 230V 1P 50/60Hz 2000W Compressed air 4,5 - 8.0 bar / 3Nm³/h Rbedpfx Aenr Hi Sjcvew Brine supply 140 liters Stainless steel version Refurbished and converted to Comfort control - Renewal of all electrical components - Renewal of all hose connections Type: HK 500 400 Kg Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you RIVSET self-pierce rivet system. with punch rivet pliers 9524-640-826-7 operating voltage: 400V 50 Hz rated current: 13A Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V year of manufacture: 2011 max. permissible rivet setting pressure: 250 bar max. permissible rivet setting force: 78 kN weight of the tongs: approx. 195 kg type: 9524-640-826-7 Rbodpopgulasfx Acvsw The system was for inspection at the manufacturer and is functional. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a Ytterbium Fiber Laser. The laser welding gun LSS5 M completes the series as a compact welding tool. With laser powers of one to four kilowatts, integrated cooling technology and convenient control unit this combined welding and clamping tool is an ideal tool for welding high-strength steels, galvanized sheet pairings or aluminium. Trifocal technology 3500W laser gun Controller 3F Operating mode CW/Modulated Wavelength 1070 nm Laser power main beam 3.0kW Laser power secondary beams 2 × 0.25 kW Spot size (depending on fiber and optics), µm 250 - 600 Rsdpjhh H Rmofx Acvebw Power requirement 3500 W laser power Laser Duty Cycle 30% (with cooler) 3.5 kW Dimensions, controllerW × D × H, mm 608 × 808 × 1335 Weight 250 kg Lss-5M-3500-3F 400-460V AC 3P/PE 50/60Hz 32A/120k Type: Laser welding gun LSS-5M-3500-3F Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), VLM Type: V.745.672.120 Model CC 1000-FL HL Corrosion test chamber for salt spray tests Specifications: Test chamber volume: approx. 1000 L Test chamber dimensions (ΒχΤχΗ1/Η2): 1400x800x800/1020 mm Door opening dimensions (WxH): 1300x680 mm External housing dimensions втн: 2162 x 995 x 2080 mm Operating temperature range: 5°C > room temperature to +80°C High-load version for loads up to 350 kg Process control: Beckhoff PLC, color touch screen display display, 50 memory locations for test procedures, 50 Memory locations for test segments, ramps: Rbjdet Igc Sspfx Acvsw Humidity-temperature over the entire working range, Ether connection Electrical connection: 400 V, 50 Hz, 5700 W Tap water: min. 2.5 bar Tap connection 3/4" External thread for connecting an ion exchanger cartridge Compressed air: 7-8 bar Waste water: Siphon / 30 mm ID hose nozzle Exhaust air: pipe end OD 75 mm Operating systems: Salt spray Condensation water (CWC) Ventilation Room air Warm air Controlled humidity

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm Rbjdpfxexg Hrkj Acvow - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWi 30.20 Dry splash wall Dimensions: 3000 x 2000 mm W X H Fan is built into the wall Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Rbodpefr T Emjfx Acvjw Terminal strip (+180,- EUR net) Options/additional price for: transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWi 20.20 Dry splash wall Dimensions: 2000 x 2000 mm W X H Fan is built into the wall Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof Rjdpefr T Eqofx Acvebw exhaust air pipe: 400 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSE 20.20 Dry splash wall Dimensions: 2000 x 2000 mm W X H Fan is installed above the wall + Fan in the height Air capacity: 7,200 m³ / h Motor: 0.75 kW explosion-proof (ATEX) Exhaust air pipe: 500 Ø mm depth: 900 mm The pipeline should not exceed a total length of 3-4 meters. Rbjdpfx Aofv Hiqjcvjw Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWc 20.20 Dry bulkhead Dimensions: 2000 x 2000 mm W X H + Fan in the height Rbsdpfsfn Ndcsx Acvew Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof exhaust air pipe: 400 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. T.S.W.C. 30.20 Dry bulkhead Rbedjfn Nddepfx Acvsw Dimensions: 3000 x 2000 mm W X H + Fan in the height Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: used, Gun cleaning device MARX PWA 900 -used- Housing parts made of stainless steel, timer, fresh spray nozzle ----- Technical data ----- Rodpfxeu R Tfas Acvsbw Dimensions (LxWxH): 670 x 510 x 370 mm, Compressed air: 6 bar

Condition: good (used), Compact flame monitor 8.30 Rbodpfxjb A H Nco Acvew -Type: 8.30 -0-20 mA/1s Price: per piece -Quantity: 2 available -Weight: 1.2 kg

Condition: good (used), Paint module Gun Driver Module -Type: Spraymation 305910-2 -50 VDC Price: per piece Redpeb A Rk Tefx Acvsbw Quantity: 2 available -Weight: 0.8 kg

Condition: excellent (used), - Graco Brand, Ref. H85T10 - General industry, metal, wood - Includes hoses, electrostatic gun and nozzle. Rjdpfx Aeryv Ncjcvsbw - Graco H85T10 electrostatic spray gun and nozzle, H85T10 - New high pressure hose 7,5 meters - Second hand product totally revised - 1 year warranty. It is in a condition equivalent to a new product. - VAT NOT included

Condition: excellent (used), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: Offered for sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of enclosure or component water ingress protection (IP) classes. With optional features, testing according to IPX9K (high-pressure/steam jet), ISO 20653, and additional standards is possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, compliant with standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Rjdpfoxzprcex Acvjbw Possible Protection Classes & Tests Depending on configuration, the SWT system covers a wide range of tests: Standard configuration: IPX3 / IPX4 tests (spraying and splashing water from all directions). Optionally: Higher protection classes up to IPX5 / IPX6 (jetting water), and – with corresponding high-pressure configuration – up to IPX9 and IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection levels) and ISO 20653 (e.g. for vehicle or outdoor applications) – depending on intended use. Typical Applications Typical application scenarios for such a test chamber include: • Electronic devices or enclosures intended for outdoor use or humid environments, such as outdoor lighting, control housing, assemblies, panels. • Components for vehicles or machines, especially those exposed to rain, splashing water, or high-pressure cleaning (e.g., construction machinery, e-bike or vehicle parts). • Batteries or electrical components requiring water ingress protection testing – e.g., automotive industry or e-mobility applications. Technical Data: Applicable protection classes: IPX3 / IPX4 Oscillating tube radius (for IPX3/4 tests): standard 200 mm (for SWT 1000), optionally up to 400 mm. Test chamber (interior): Internal dimensions: approx. 1,000 × 1,015 × 1,000 mm (W × H × D) Operation / Control: Web panel or GUI for test programming and control. Condition: used Scope of supply: (see photo) (Data subject to change and correction. Technical specifications may be updated without notice.) Further questions welcomed by phone.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, suction capacity: 3,900 m³/h, input voltage: 400 V, power: 1.5 kW (2.04 HP), Equipment: cabin, documentation/manual, emergency stop, lighting, dimensions without fan and control panel! Work area - dimensions (mm): 990(w)x800(d)x1100(h) Rsdpfx Acsia Tabjvjbw Overall dimension(mm): 1100(w)x1900h)x1100(h) Technical data: - Fan power 1.5kW (ATEX) - Fan suction capacity: 4100 m³/h (max 750Pa) - Lighting: 1pc 2x18W (ATEX) - Connection voltage: 230V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2008, For sale is a salt spray chamber designed for straightforward testing of the corrosion resistance of metal parts and coated surfaces. Within the enclosed chamber, components are exposed to a fine salt mist to reveal corrosion under realistic conditions. The system is clearly arranged and suitable even for users without specialized knowledge. The salt spray chamber is fully functional (still in operation) and in well-maintained condition. Key specifications can be found in the attached images. Rbjdex Uz Hhspfx Acvsw

Condition: excellent (used), Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This equipment tests the ingress of water into housings. In conjunction with a timer, the test cycle can be automated for an adjustable test duration from 3 seconds up to 30 hours. According to DIN VDE 0470 T1 and EN 60529 for testing protection ratings IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be minimized. Features: - Glass door with wiper - Pneumatic drive for the oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swivel and exchangeable nozzle holders - Adjustable and monitored water flow rate - Test duration control Mechanical Load Data: - Max. load with test object (evenly distributed over area) - Permissible test load weight for carrying rack (total): 25 kg - Spray radius: 200 mm / 400 mm Test Data for IP Protection Ratings: - Oscillation speed: approx. 60°/s - Oscillation angle for IPX3: approx. ±60° - Oscillation angle for IPX4: approx. ±180° to -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data: - Voltage: 3/N/PE AC 400V ±10% 50 Hz - Rated power: 1.5 kW - Rated current: 5.0 A - Weight: 375 kg Rjdpfxoxxuytj Acvobw Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: new, - NEW -- Compact design, space-saving- Powerful, high suction power, low operating costs- Easy to maintain, long filter service life- Universally applicable, variable accessories- High flexibility- Mobile design- Extraction technology with front panel system- mobileTechnical specifications:- Intake manifold 1000x1000 mm- Motor rating 1.5 kW, 3.4 A, 3 Ph, 400V/50 Hz/1410 rpm- Flow rate 4600 m³/h- Usable negative pressure 500 Pa- Filter surface 1.0 m²- Filter cleaning none- Filter material green (1 piece)- Filter load 4600 m³/m²/h- Residual dust content Max. degree of separation approx. 97%- Automatic control none- Electrical connections 1-stage switch, +5 m connection cable with power plug, 1-pole, 10A fuse on site,- Compressed air supply None- Max. sound pressure level 72 dB(A)+measurement uncertainty 4 dBDIN EN ISO 11201 free field measurement- Running gear 4 castors with thermal coating, D=75 mm- Dimensions (W/H/D) mm 1012x1405x915 (1887x1405x1144)- Weight device approx. 175 kgItem No. 195 627 01 Rbodpfxov Svcye Acvow

Condition: new, Technical data:Max. Flow rate in m3/h: 6.800Max. Negative pressure in Pa: 500Rated motor power: 0.75/ 2.1 kW ex (suitable for installation in zone 2 according to ATEX)Filter area in m2: 2Dimensions ( W x D x H) in mm: 2,971 x 1,405 x 1,131Connection diameter: 300 mmSwitch: 2-stage5 m cable with plug and throttle valve Rbedpfsvwfm Sex Acvjw