Used Fermec 960 for sale (475)

Condition: used, maximum load weight: 29,280 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 13,260 mm, loading space width: 2,480 mm, loading space height: 2,945 mm, total length: 13,600 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Equipment: ABS, SCHWARZMÜLLER 3-axle SANH Mega-Curtainsider with a 2-piece tail lift First registration 10/2024 Permissible total weight, technically: 39,000 kg Unladen weight: 9,720 kg Internal length: 13,600 mm Internal width: 2,480 mm Internal height, front: 2,895 mm, rear: 2,945 mm, adjustable Fifth wheel height: 960 to 1,050 mm Chassis with frame reinforcements for increased point load of 20 tons over 5 m. Hole-type outer frame 22 pairs of recessed lashing eyes, 4 tons 10 pairs of recessed lashing eyes, 5 tons Sieve-printed plywood floor 27 mm + top layer of birch 12 mm, laid transversely, floor load capacity 7,200 kg, forklift axle load, rear bolted steel tear-resistant wear plate 5/7 mm Reinforced aluminum front wall, 2,550 mm high, inner front wall protection made of 9 mm sieve-printed plywood Curtain rail at the front corner posts with tensioning ratchet, curtain can also be opened and tensioned from the front Rear portal can be widened by 490 mm on each side 3 pairs of reinforced center posts, 5 rows of slat pockets Dcsdpfozxkuasx Aa Hjl 4 rows of aluminum slats, 100 mm EDSCHA sliding cover with steel scissors, can be moved forward AND backward Manually hydraulic lift roof on both sides, can be raised by 400 mm Sliding curtain, Code XL INFLATABLE AIRBAG SYSTEM in the trailer roof SAF axles, disc brakes, IntradiscPlus integral Axle spacing: 1,310 + 1,410 mm 1st axle: lift axle 3rd axle: trailing steering Tires: 6 x 435/50 R 19.5 Goodyear WABCO trailer EBS with anti-roll protection RSS Spring brake parking brake on 2 axles Air suspension with lifting and lowering device, extra-long lifting bellows with a total lift of 250 mm Axle load display via CAN bus Tire pressure monitoring Lighting: full LED 2 stainless steel toolboxes on the left, 1,000 x 500 x 500 mm 2-piece tail lift, Dhollandia type DH-AR41 Load capacity: 16,000 kg Reinforced for 3-wheel vehicles Reinforced steel platform, divided approximately 5,000 mm (approximately 3,100 mm + 1,900 mm) in a closed, reinforced design (AR/AR2 5 tons point load) Steel platform galvanized with "polyurethane floor coating" (V4 non-slip and abrasion-resistant continuous floor with Mandurax and sealant) Lifting mechanism hot-dip galvanized Hydr. 10-ton support in the area of the trailer end, manual external control Automatic mechanical tilt CE design Additional mechanical platform locking Plug-in stop for the ramp at the rear left and right, including housing in the outer frame RENTING is the new BUYING, with us also available immediately in FULL-SERVICE RENTAL -----

Condition: used, Cleaning washing defatting machine PERO type ROBOMAT 7A Useful length: 1600 mm Useful width: 1040 mm Useful height: 960 mm Dcedpfjzy Rvmex Aa Hol Loading height: 800 mm Maxi load weight: 1500 kg

Condition: used, functionality: fully functional, Year of construction: 2005, load capacity: 1,000 kg, lifting height: 1,650 mm, Electric Stacker JUNGHEINRICH type EMC B10 Year of construction: 2005 Maxi loading capacity: 1000 KG Centre of gravity: 600 mm Maximum width of the lower forks: 1250 mm Dcodozy Rupjpfx Aa Hsl Total length of the lower forks: 960 mm Equipped with new batteries (October 2024) Length: 1500 mm Width: 1250 mm Total Lift height: 1650 mm Weight: approx. 500 kg

Condition: good (used), mileage: 727,771 km, power: 338 kW (459.55 HP), first registration: 08/2019, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 4x2, wheelbase: 3,620 mm, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 14, emission class: euro6, suspension: air, total length: 5,960 mm, total width: 2,550 mm, total height: 3,980 mm, Year of construction: 2019, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, retarder, seat heater, traction control, = Additional Options and Accessories = - 2nd diesel tank - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Manual - Radio/cassette - Sleeper cab - Lane keeping assist - Fabric - Auxiliary braking system = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 8064 kg, Gross vehicle weight: 19000 kg, Total tank capacity: 960 liters, 2nd diesel tank, Height of the fifth wheel coupling: 97 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling force: 398 tons, Suspension type: Full air, Type of cab: Sleeper cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Parking cooler, Parking heater, Electric windows, Electric mirrors, Radio/cassette, Color: Blue, Heated mirrors, Type of lighting: Halogen lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Flashing lights, Engine power: 338 kW (453 Hp), Fuel: Diesel, Euro: 6, Transmission type: Automatic, Transmission type: Scania, Gears: 14, Auxiliary braking system, Retarder brand: Intarder, Power steering, ABS, ASR, Central locking, Seat configuration: 1+1, Seat cover: Fabric, Seat adjustment: Manual = Additional Information = Transmission Transmission: SCA, 14 gears, Automatic Axle Configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/55R22.5; Steered; Tire tread depth left: 5 mm; Tire tread depth right: 6 mm Axle 2: Tire size: 295/60R22.5; Double tires; Tire tread depth left inner: 5 mm; Tire tread depth left outer: 5 mm; Tire tread depth right inner: 3 mm; Tire tread depth right outer: 5 mm Weights Unladen weight: 8,064 kg Payload: 10,936 kg GVW: 19,000 kg Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial Information Leasing price: 334 € per month (default, 60 months); Ask for more information and conditions Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealers in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing inventory • Recognizable quality • Good price • Fair business practices • We speak many languages • We understand our customers • Support for import and transport Dedpfxszr Enbo Aa Hocl • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request via our website. Ask directly about our European warranty package.

Condition: good (used), Year of construction: 1995, functionality: fully functional, Control system: Heidenhain iTNC 530 Operating hours: 54631 h X-axis 3500 mm Y-axis 1000 mm Z-axis 900 mm Drive power 30 kW Speed range 20–3800 rpm Rapid traverse 15 m/min Feed rate 4 m/min Clamping surface 2x 1600 x 960 mm Max. table load 2 x 4000 kg Machine weight (approx.) 21 t Machine dimensions (WxDxH) 10770 x 4100 x 3150 mm Technical data / Accessories Dcsdpezufi Rofx Aa Hjl Universal bed-type milling and boring machine Milling head position: Vertical, horizontal (top, center, left, right) Heidenhain TS 120 3D touch probe Kekeisen TW 32 drum-type tool changer Knoll hinged-belt chip conveyor

Condition: new, Year of construction: 2025, weight 340 kg diameter 960 mm height 980 mm 0 219 l Vibratory Surface Finishing Machines With Separator Dcedpfx Aoymf Rasa Hel VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. These type of machines have large screen area and allow easy separation of work pieces from the grindstones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: used, Depalletizer and Palletizer – Flema Star C-LC For NRW and Euro crates as well as Euro and beer pallets, 500 crates/hour, Year: 1996, empty crates in from left, full crates out to the right. Crate Unpacker – RICO UNO 1-Head Type 124 For NRW and Euro crates, head suitable for Euro 0.5l, NRW 0.5l, and Ale 0.33l/0.5l bottles, 350 crates/hour, Year: 2010, right-to-left operation. Bottle Cap and Cork Remover – ADELSKI Type PPE 2005 Dcedpfezx Dmpex Aa Hol For NRW, Euro, and Ale 0.5l bottles, 2,000–12,500 bottles/hour, Year: , Operating hours: 8,500, right-to-left operation. Bottle Washer – PAC CB 14-0.5l-R-7 LII Compact For NRW, Euro, and Ale 0.33l and 0.5l bottles, 7,500 bottles/hour, Year: 1998, Machine No. 125, Operating hours: 14,175. Bottle Inspection – SYSCONA LC 10 FD Caustic control + metal detection, Year: 2007. Filler – ICS multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6 For NRW, Euro, and Ale 0.33l and 0.5l bottles, incl. product pump, 6,000 bottles/hour, Year: 2011, Operating hours: 7,200, right-to-left operation. Labelling Machine – ANKER Roland 8/3 For NRW, Euro, and Ale 0.33l bottles, 7,000 bottles/hour, Year: 1998, Operating hours: 14,500, left-to-right operation. Inkjet Printer – Keyence MK-G1000 Year: 2022, currently configured for date coding on rear label of ANKER Roland 8/3. Crate Packer – RICO UNO 1-Head L-Machine For NRW and Euro crates, head suitable for Euro 0.5l, NRW 0.5l, and Ale 0.33l/0.5l bottles, 300 crates/hour, Year: 2012, left-to-right operation. Premixer – Jakü PM-E-30-2k For degassing and carbonation, with product tank and 2K Bran+Lübbe pump, 35 hl/h, Year: 1992. Crate Washer – RICO 2500 1-Bath For NRW and Euro crates, 600 crates/hour, Year: 2012, right-to-left operation. 2 CIP Tanks, each 6 hl Steam-heated for filler CIP, with disk change system, Year: 2012.

Condition: used, Year of construction: 2000, VENJAKOB HGS-Z/H Surface Coating Machine / Painting System Manufacturer: VENJAKOB Type: HGS-Z/H Dodpfjzvaz Dox Aa Hecl Year of Manufacture: 2000 Machine Type: Automatic surface coating machine / Spray painting system for all 5 sides Surface coating machine with 4 spray heads for water-based paints, solvents, and stains Design: Automatic surface coating machine Process: Spray painting / Surface coating Workpiece transport: Continuous operation Compressed air connection: approx. 6 bar Application area: Wood and wood-based components Control system: VENJAKOB control system Paint application: Spray application Design: Industrial continuous system Machine dimensions: 4450 x 3170 x 2520 mm Passage width: 1300 mm Working height: 920-960 mm Passage height: 200 mm Rubber conveyor belt with paint recovery and belt cleaning

Condition: used, Year of construction: 2010, Technical data Manufacturer / model: C.M.E. S.r.l., Ideal I360 / type 1360 Serial number / year: Dedpfx Aajzxu Ahs Hocl Flow rate / operating pressure: 36 m³/h at 3 bar Maximum pressure: 4 bar Motor power / speed: 5.5 kW / 2,900 rpm Dimensions (L × W × H): 1,350 × 730 × 960 mm Weight: approx. 325 kg Connections: DIN 65 according to DIN 11851 Product-contact materials: AISI 316 stainless steel and NBR elastomers Suitable media: wine, destemmed grapes, must, vinegar, oil, juices, and fruit/vegetable pulp Maximum fluid temperature: approx. 70 °C Performance curves: not available Spare parts: see the operating and maintenance manual with spare-parts catalogue Machine-specific operating data according to C.M.E.; dimensions according to the “Ideal 360” manual.

Condition: used, Year of construction: 2023, Used System Year of Manufacture: 2023 Condition: Like new, very few operating hours Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum pressure: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, incl. support baskets Filter area: 77.6 m² Filter loading: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring for raising the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz - Protection class/enclosure type: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/Outlet: 960 x 250 / 960 x 208 mm - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascading up to 2 fans up to 37 kW with frequency converter transfer - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hour counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line Dedpfszlbqrjx Aa Hecl - ZRS power module up to 0.18 kW; time parameters adjustable via touch display - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluations; rotation monitoring of the rotary valve - 24 V DC supply air/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 lfm of cable - Ducting system including elbows, branch pipes, reducers, PU hoses, machine connections, small parts, and EP dampers for exhaust from 11 woodworking machines 1 HRS as specified - Return air system in accordance with TRGS 553, with changeover damper and fire damper - Galvanized base frame for container l...

Condition: used, Year of construction: 2016, Manufacturer: KRAUSS MAFFEI, Type: KM 850-6100/1400 MXZ Blue Power, Year of manufacture: 2016, Serial number: 61024868, Control system: Krauss Maffei MC5, Clamping force: 850 t, 2 injection units, Rotary table, Installation height min./max. 500/960 mm, Daylight opening 1,120 mm, 48 hot runner nozzles, hydraulic core pull systems 2 (DS) 3 (AS), Screw diameter 95/60 mm, Shot weight 3,200/500 g, Parts removal robot, Manufacturer: Krauss Maffei, Type LRX350, Year of manufacture: 2016, Serial number: 2114889, Conveyor belt, 3,000 x 800 mm 37,544 hours (25,846 net production hours) Dsdpfx Aajzn Ap Io Hocl Note: Machine is part of an online auction!

Condition: used, Year of construction: 2009, Edge banding machine Manufacturer: IMA Type: Novimat/I/G80/650/R3 Year of manufacture: 2009 Technical data - Workpiece overhang from the chain conveyor: 38 mm - Feed width: min. 65 mm (with max. workpiece thickness of 25 mm) - Workpiece length in feed direction: 150 mm - Overall height (top edge of chain conveyor): 960 mm - Feed speed: approx. 6 - 30 m/min, electrically adjustable - Machine control system ICOS open compact Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65 mm - Workpiece thickness: 8 - 40 mm (with edge trimming function) / 60 mm (without edge trimming function) - Smallest workpiece: 150 x 150 mm or 65 x 300 mm - Edge material: paper, plastic and veneer - Height: 14 - 65 mm - Roller material thickness: 0.3 - 3.0 mm (veneer edges limited to max. 1.0 mm) - Max. upper edge overhang: 5 mm Units Infeed area - Release agent applicator mounted at the top and bottom, not adjustable Edge trimming - 2 motors 4.5 kW, 150 Hz, 9000 rpm - incl. frequency inverter with braking function - Motor 1 counter-rotating - Motor 2 co-rotating Gluing unit VTG 3-6 - with one preheating nozzle 300 mm for preheating the workpiece edge - 6-position edge magazine for roller material 0.3 - 3 mm thick. - 1 driven main pressure roller and 4 pressure rollers, with scraper, pneumatically adjustable Glue application - with pneumatic quick-lock system - Chem-Coat coating - electronic temperature control - Volume 0.8 l Pre-melting tank approx. 1 l - Heating power 3 x 400 W - with EVA glue, approx. 7.0 kg/h - with filler-free glue, approx. 5.0 kg/h Cutting unit Dcsdozuyi Ejpfx Aa Hjl - 2 motors 660 W, 200 Hz - incl. frequency inverter with braking function - pneumatic pivoting 0+25 for straight and bevel cutting Flush trimming - 2 motors each 1000 W, 400 V, 200 Hz, 12000 rpm - with HSK 25 shank - incl. frequency inverter with braking function Multi-profile trimming unit - 2 motors each 660 W, 400 V, 200 Hz, 12000 rpm - with HSK 25 shank - incl. frequency inverter with braking function - for trimming 4 profiles - with stepper motor axes for horizontal and vertical positioning Contour trimming unit KFA x30 - 1 motor 500 W, 400 V, 400 Hz, 18000 rpm - Program-controlled conversion for up to 4 profiles - incl. fine positioning for different edge thicknesses Multi-profile scraping blade - Stepper motor axes for horizontal and vertical positioning - Scanning from above and below (max. 4 profiles) - Scanning from the side via pneumatic pressure Spray nozzles at the top and bottom for applying cleaning agents - fixed, not adjustable Surface scraping blade - with height sensing skid - electronically controlled horizontal positioning Buffing unit - 2 lower and 2 upper motors, 180 W, 50 Hz, 1400 rpm - 1st motor pair with cloth-sisal discs 50x160x19 mm - 2nd motor pair with polishing discs 50x160x19 mm - The motors operate in the same direction and are both tilted and pivoted in the feed direction. - Each motor can be individually adjusted vertically 2x NC-controlled grooving - 2 milling motors each 4.5 kW, 150 Hz, 9000 rpm - incl. frequency inverter with braking function - one manual 90-degree pivoting device from 180 -270 with co- and counter-rotating function - Horizontal, stepless adjustment with AC servo motor for grooving unit Workpiece return Note: The technical data and descriptions are copies of the order confirmation at the time. The information is for informational purposes only and is non-binding.

Condition: good (used), mileage: 530,155 km, power: 346 kW (470.43 HP), first registration: 11/2020, fuel type: diesel, tire size: 315/60R22,5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 14, emission class: euro6, suspension: air, total length: 6,050 mm, total width: 2,550 mm, total height: 3,530 mm, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, seat heater, traction control, = Additional Options and Accessories = - 2nd diesel tank - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Manual - Radio/cassette - Sleeper cab - Lane departure warning system - Fabric = Notes = Number of axles: 2, Configuration: 4x2, Tare weight: 7724 kg, Gross vehicle weight: 19000 kg, Total tank capacity: 960 liters, 2nd diesel tank, Height of fifth wheel coupling: 99 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 353 tons, Suspension type: Full air, Type of cab: Sleeper cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Type of lighting: Halogen lamp, Lane departure warning system, Seat heating, Bluetooth, Engine power: 346 kW (464 hp), Fuel: Diesel, Euro: 6, Transmission type: Automatic, Transmission type: Scania, Gears: 14, Power steering, ABS, ASR, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual Dcjdpfx Aszqzixea Hsl = Further Information = Transmission Transmission: SCA, 14 gears, Automatic Axle Configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 315/60R22.5; Steered; Tire tread depth left: 10 mm; Tire tread depth right: 10 mm Axle 2: Tire size: 295/60R22.5; Double tires; Tire tread depth left inner: 3 mm; Tire tread depth left outer: 5 mm; Tire tread depth right inner: 3 mm; Tire tread depth right outer: 4 mm Weights Tare weight: 7,724 kg Payload: 11,276 kg GVW: 19,000 kg Maintenance APK (Technical Inspection): valid until 10.2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial Information Leasing price: €403 per month (default, 60 months); Ask for further information and conditions Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands from different years of construction and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry through our website. Ask directly about our European warranty package.

Condition: new, functionality: fully functional, mileage: 1 km, power: 10 kW (13.60 HP), gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 960 kg, empty load weight: 960 kg, operation weight: 960 kg, maximum load weight: 150 kg, lifting power: 150 kg/m, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, suspension: steel, Year of construction: 2026, Equipment: additional headlights, adjustable chassis, head guard, hydraulics, rubber tracks, Excavators GT950 Professional GT950 tracked excavator Model GT950 – 960 kg Dsdezgn Tispfx Aa Hscl Introducing the compact and highly functional GT950 tracked excavator – the ideal solution for excavation, construction, and installation work in spaces with limited area. Thanks to its own weight of 960 kg and robust construction, the machine offers stability, precision, and comfort, even under challenging terrain conditions. Its small dimensions and a pivoting boom with a turning radius of only 733 mm ensure that the GT950 performs perfectly on narrow plots, in gardens, and on construction sites with limited space. Engine and Reliability The excavator is equipped with a modern Koop 192F engine that meets the Euro 5 standard, which guarantees low fuel consumption and smooth operation. The reversed cylinder on the boom increases durability and safety during intensive use, ensuring long and trouble-free operation of the machine. Maneuverability and Stability on Terrain Thanks to the extendable tracks with a width of 180 mm and a solid undercarriage with a width of 950 mm, the GT950 offers excellent stability and grip on uneven terrain. The compact overall dimensions (2650 mm long, 930 mm wide, and 2200 mm high) allow for free maneuvering, even in tight working environments, and the ground clearance of the platform of 380 mm enables trouble-free operation on difficult ground. Excellent Performance The impressive operational capabilities include a maximum digging depth of up to 1680 mm, a maximum digging reach at ground level of 2430 mm, and a digging height of up to 2490 mm. The dumping height of 1760 mm makes it easy to load material, and the minimum digging radius of 1340 mm ensures precise work in a limited space. The blade with a lifting range of up to 175 mm and a lowering range of up to 325 mm further increases the functionality of the machine. Technical specifications Model GT950 Weight 960 kg Engine Koop 192F Euro 5 Bucket width 420 mm Reversed cylinder on the boom Yes Joystick Yes Swing arm Yes Extendable tracks Yes Max. digging reach at ground level 2430 mm Max. digging depth 1680 mm Max. digging height 2490 mm Max. dumping height 1760 mm Minimum turning radius 1190 mm Min. digging radius 1340 mm Max. lifting height of the blade 175 mm Max. penetration depth of the blade 325 mm Overall length 2650 mm Overall height 2200 mm Overall width 930 mm Overall length of the tracks 1100 mm Turning radius of the upper carriage 733 mm Ground clearance of the upper carriage 380 mm Width of the undercarriage 950 mm Width of the track 180 mm Height of the track 320 mm

Condition: good (used), mileage: 521,776 km, power: 346 kW (470.43 HP), first registration: 07/2020, fuel type: diesel, tire size: 315/60R22,5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 14, emission class: euro6, suspension: air, total length: 6,050 mm, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, seat heater, traction control, = Additional options and accessories = - 2nd diesel tank - Heated mirrors - Digital tachograph Djdpfx Aaozqqw Ee Hocl - Trip recorder (control unit) - Fixed - Halogen lamp - Manual - Radio/cassette - Sleeper cab - Lane keeping assist - Fabric = Notes = Number of axles: 2, Configuration: 4x2, Tare weight: 7789 kg, Gross vehicle weight: 19000 kg, Total tank capacity: 960 liters, 2nd diesel tank, Height of the fifth wheel coupling: 100 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 1 ton, Suspension type: Full air, Type of cab: Sleeper cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Lane keeping assist, Climate control, Seat heating, Bluetooth, Engine power: 346 kW (464 hp), Fuel: Diesel, Euro: 6, Transmission type: Automatic, Transmission type: Scania, Gears: 14, Power steering, ABS, ASR, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual = Additional information = Transmission Transmission: SCA, 14 gears, Automatic Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 315/60R22.5; Steered; Tire tread depth left: 9 mm; Tire tread depth right: 9 mm Axle 2: Tire size: 295/60R22.5; Twin tires; Tire tread depth left inner: 4 mm; Tire tread depth left outer: 7 mm; Tire tread depth right inner: 5 mm; Tire tread depth right outer: 6 mm Weights Tare weight: 7,789 kg Payload: 11,211 kg GVW: 19,000 kg Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial information Leasing price: 403 € per month (default, 60 months); Ask for more information and conditions Identification License plate: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Honest business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 2006, functionality: fully functional, year of last overhaul: 2022, SCHULER GRÄBENER TMK 2-630 – 630 t Punching and Forming Press with Coil Feeding System Manufacturer: SCHULER / Gräbener Pressensysteme Type: TMK 2-630-3.0-50/210 S Year of Construction: 2006 Press Force: 6,300 kN / 630 t Design: Mechanical Punching and Forming Press / Single-Action Press For sale is a SCHULER GRÄBENER TMK 2-630 mechanical single-action press / punching and forming press with a press force of 6,300 kN, including a complete SCHULER automation strip guiding, straightening, and coil feeding system. The system was used for the mass production of punched and formed parts and is currently still fully assembled on site. Technical Data Press Rated Force: 6,300 kN Rated Stroke: 12 mm Stroke: 50–210 mm Stroke Rate: 15–60 strokes/min Max. Flywheel Speed: 960 1/min Ram Adjustment: 200 mm Max. Installation Height: 800 mm Table / Tooling Area: approx. 3,000 × 1,500 mm Max. Tool Dimensions: 3,000 × 1,500 × 800 mm Max. Tool Weight: 12,000 kg Drive Power: max. 280 kW Rated Current: 420 A Compressed Air: 6 bar Hydraulic System: 400 bar Clutch / Brake: 6 bar Permissible Switching Rate Clutch / Brake: 16/min Machine Weight without Accessories: approx. 138,000 kg Coil and Feeding System SCHULER Automation / Gräbener Pressensysteme, Year of Construction 2006. Coil / Uncoiling Unit: Type AC-LH-160-0650 Strip Width: 40–600 mm Coil Outer Diameter: 900–1,800 mm Spreading Range: 470–530 mm Coil Uptake / Uncoiling Strip Guiding and Straightening System Threading / Strip Guiding Devices Automated Material Feeding Roller Guides Conveying / Removal Technology Complete Protective Enclosure Control / Operation SCHULER System Control Siemens SIMATIC Operating Components Siemens SIMATIC OP17 Touch Panel Separate Operating Panel for the Feeding System Setup Operator Devices Unidor Process / System Monitoring Dcodszv Utnjpfx Aa Hjl Condition and Maintenance The system was overhauled in 2022 for approximately €85,000. The maintenance history has been regularly recorded. Current maintenance and repair records are also available for 2026. The system is fully assembled on site and can be inspected by appointment. Scope of Supply The press system is sold, including the associated SCHULER automation and the existing coil, strip guiding, straightening, feeding, and removal technology, as well as the associated protective enclosure and operating / control devices, according to the existing system scope. Complete Service from a Single Source Upon request, we offer a complete project management service for this system – from financing to installation and commissioning at the new location. Possible Services: Individual financing and leasing solutions Organization and support for disassembly Heavy-load loading and transport International transport and export processing Organization of crane and heavy-load operations Reconstruction and assembly at the new location Support during commissioning Coordination of required service and specialist companies This allows the system to be taken over not only at the current location, but also as a completely organized machine project, depending on the customer's requirements. Location: Germany Availability: by arrangement Inspection: by appointment Disassembly / Transport / Reconstruction: can be completely organized upon request Financing / Leasing: upon request Technical data based on available documents and nameplates, subject to change and prior sale.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details turning diameter 210 mm turning length 700 mm Dcedpszru Ukofx Aa Hsl control Okuma OSP-E 100 L total power requirement 35,7 kVA weight of the machine ca. 7,1 t dimensions of the machine ca. 2660 x 2000 x 2330* mm Additional information CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. The machine is being sold partially overhauled. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Main spindle: Spindle bore: 53 mm Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Rapid traverse: 40000 mm/min W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360 x 0.001 deg. Rapid traverse: 400 rpm Disc turret: 2 x 12 stations Tool holder mount: VDI 30 mm Power of driven tools: 4 kW Total connected load: 35.7 kVA Machine weight: 7100 kg Machine dimensions: 2660 x 2000 x 2330 mm* Plus swarf conveyor and bar loader Accessories FMB Turbo 5-42/6200/A bar loader, year of manufacture 2005 Chip conveyor Coolant system Collet chuck for main and subspindle Both turrets equipped with tool holders Machine documentation.

Condition: excellent (used), Year of construction: 2015, Model Amada HFE MK2 5012 50 tons x 1250 , 4 axis CNC Press Brake Year 2015 Tonnage 50 tonnes Max. Bend Length 1250 mm Stroke Length 150 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 55L Motor Power 6KW Dcjdpfoyym Hkox Aa Hel Weight 2550 Kg guarding Erwin Sick machine mounted light screen,side and rear interlocked fencing Dimensions Machine Length 2000 mm Machine Depth 2300 mm Machine Height 2300 mm Distance Between Side Frames 1035mm Beam width 60 mm Table height 960 mm Open Height 370 mm Throat Depth 100 mm

Condition: excellent (used), Year of construction: 2011, Model Amada HFE M2 103t x 3110 3m, 4 axis Press Brake Year 2011 Tonnage 100 tonnes Max. Bend Length 3110 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power Dcodpfxeyym Hwe Aa Hol Weight 6600 Kg guarding Erwin Sick machine mounted light screen,side and rear interlocked fencing Dimensions Machine Length 4535 mm Machine Depth 2580 mm Machine Height 2680 mm Distance Between Side Frames 2705mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: used, mileage: 179,960 km, power: 81 kW (110.13 HP), first registration: 10/2011, fuel type: diesel, overall weight: 3,000 kg, next inspection (TÜV): 11/2026, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, Year of construction: 2011, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: Citroen Jumper panel van (Vehicle No. 93) First registration: 13.10.2011 179,960 km Engine: 2,198 cc Dcedpfx Aezxbxcsa Hol 81 kW / 110 hp Euro 5 MOT valid until 11/2026 Permissible total weight: 3,000 kg Unladen weight: 2,040 kg Payload: 960 kg Overall length: 5,413 mm x Overall width: 2,050 mm x Overall height: 2,254 mm Double rear doors Sliding door on the passenger side Wood-lined cargo area Central locking with remote control Partition with window Minor front-end damage/scratch on the passenger side rear (see picture) 1+2 seats 2 x electric windows, mirrors, heated mirrors Radio/CD Tires: 215/70R15C, approx. 30% tread remaining in the front, approx. 50% in the rear 6 spare tires on rims and 1 without a rim in the cargo area, all with good tread Price: €4,800.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €10,000 is the Ludwigslust District Court; for disputes exceeding this amount, it is the Schwerin Regional Court. Subject to errors, typos, and prior sale.

Condition: used, Winding and unwinding mandrel OBRU, type HM Order number 66239, year of manufacture approx. 1970 Coil weight 80 kg Coil width max. 200 mm Coil inner diameter 270 - 450 mm Coil outer diameter max. 650 mm Center of mandrel shaft to mandrel base 720 mm Mandrel speed 16 rpm Djdpfxszt U Iys Aa Hscl Motor power 0.18 kW Mains connection 380 volts, 50 Hz - Coil support by 4 cantilever bolts - Central spreading of the 4 support bolts via eccentric rotating lever - Gear drive via geared motor - Mechanically adjustable slip clutch - Height adjustable by clamping to the support column - Motor circuit breaker Dimensions L x W x H 960 x 650 x 1100 mm Weight 110 kg Good condition

Condition: excellent (used), Year of construction: 2000, Technical data: Working length: 4100 mm Stand width: 3650 mm Pressing force: 170 to CNC control: OPERATOR II grafic controlled axes: Y1/Y2; X1/X2; R1/R2;, Z1/Z2 Dodpfst Upp Uox Aa Hecl motorized adjustable back gauge throat depth: 300 mm stroke: 200 mm crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: 1 set of tools The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear correspond to its age; used machines are sold without any warranty.

Condition: as good as new (ex-display), 3000 kg welding rotator, hydraulically adjustable in height Speed: 0.05 to 0.6 revolutions per minute Table diameter: 1200 mm Tilt: 0 to 120° Total height adjustment: approx. 700 mm Height adjustment with the disk in a vertical position, measured to the center: Djdjdvn E Uepfx Aa Hocl 960 mm ~ 1910 mm Dimensions with the disk in a horizontal position: 1200 mm to 1900 mm

Condition: new, Year of construction: 2026, load capacity: 2,000 kg, Equipment: foot remote control, 2000 kg welding positioner, hydraulically adjustable in height Speed: 0.05 to 0.8 rpm Table diameter: 1200 mm Tilt: 0 to 120° Total height adjustment: approx. 700 mm Dcodpszk Rkfjfx Aa Hsl Height adjustment with vertical disc, center to center: 960 mm ~ 1910 mm Dimensions with horizontal disc: 1200 mm to 1900 mm

Condition: new, Year of construction: 2026, load capacity: 3,000 kg, 3000 kg welding rotary table, hydraulically adjustable in height Speed: 0.05 to 0.8 RPM Table diameter: 1200 mm Tilt: 0 to 120° Dcjdpfxszk Rhwe Aa Hjl Total height adjustment: approx. 700 mm Height adjustment with the disc in the vertical position, from center: 960 mm to 1910 mm Dimensions with the disc in the horizontal position: 1200 mm to 1900 mm