Used Evo for sale (600)

Condition: new, Year of construction: 2025, Double standing seam roofing machine F3 is used for making double standing seam lock for the roofing panels that are used for installation of the double standing seam roofing. The double standing seam roofing is widely used because it’s impossible for the water to get under the closed double standing roofing panels in the places of their contact with each other, thanks to lock’s special shape. The special shape means that double standing seam panels cover each other in the places of their contact, and after their installation on the roof it will be closed using special double standing seam closing tools (manual tool for closing double standing seam lock and electric machine for closing double standing seam lock). The advantage of this Standing seam machine is possibility to change the width of the standing seam roofing panels in very simple way. There’s a special screw at the one side of this standing seam machine and turning it around the operator can change the width of the panels. So the adjustment of the standing seam roofing machine doesn’t take a lot of time for the operator and let him use his working time more effectively. This double standing seam roofing machine is good for making double standing seam panels from different kinds of metals (galvanized steel, steel coated with copper, zinc, titanium, etc.) This standing seam roofing machine has six pairs of rolls which form the shape of the double standing seam roofing panels. This machine could be produced for using with 220V or 380V electric lines. You can also purchase with roofing seam machine: additional pair of rolls for making ribs on the roofing panels; additional pair of rolls for making bended panels with a big radius of bending; cutting knife; metal decoiler; manual tool for closing seam lock; electric machine for closing seam lock; sheet metal cut to length machine; Gsdpfx Ajhz Twwocgjui It’s easy to work with our double standing seam roofing machine right on the place of the double standing seam roof installation, thanks to the small weight and not huge sizes of this standing seam machine. It’s let the owner of this roofing machine to save money not spending them on renting additional places for making double standing seam roofing panels, storage them and transport to the place of their installation. Our enterprise has started producing of this double standing seam roofing machine since 2005 so we have great experience in doing our job and can propose you a great solution for your business. To get more information about the price of this double standing seam roofing machine and the way it could be delivered to your location just contact us. We will give you all the information you need.

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining center with SIEMENS 840 D, dual pallet changer, internal coolant system, linear guides, and 30-tool automatic tool changer. Goded I R E Nspfx Acgoui Table size: 2 x 1000 x 450 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1100 mm Y-axis: 500 mm Z-axis: 640 mm Spindle speed range: 50 – 10,000 rpm Table load: 600 kg Feed rate range, X/Y/Z, stepless: -10,000 mm/min Rapid traverse in all axes: 30 m/min Drive power: 18.5 kW Machine dimensions L x W x H: approx. 3605 x 3041 x 3220 mm Weight: approx. 6700 kg Accessories / Special features: • CNC control system SIEMENS 840 D • Dual pallet changer • 30-tool automatic tool changer • Full enclosure with safety doors, electrically secured • High spindle speed up to 10,000 rpm and drive power of 18.5 kW • Linear guides with double roller recirculating bearing, allowing high torques to be absorbed evenly in all directions • Ball screws in all 3 axes • The entire machine bed is made of Meehanite cast iron, ensuring precision, rigidity, and vibration damping • Tool holder DIN 69871, ISO 40 • Chip conveyor with integrated coolant system • 4th axis pre-configured • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: new, pressure: 40bending length: 1300column width: 1300daylight: 375stroke lenght (max.): 150messurements (LxWxH): 1880 x 2435 x 2320 mmweight approx.: 3400motor power: 2 x 3,8 Guodpod H Hh Hsfx Acgji

Condition: new, pressure: 40bending length: 1530column width: 1530daylight: 590stroke lenght (max.): 300messurements (LxWxH): 2660x1960x2500weight approx.: 4600motor power: 11CNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Godpfod Etfzsx Acgoui

Condition: new, pressure: 175bending length: 3570column width: 3570daylight: 590stroke lenght (max.): 300messurements (LxWxH): 5340x2100x2680weight approx.: 11500motor power: 22CNC crowning system by control: jaCNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Guedpfxsd Etf Dj Acgsi

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. Gujdpfxetp H Ero Acgei The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Rolling speed (m/min) 10-15

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,100 mm, power: 19 kW (25.83 HP), DM1100 DC EVO Removal of solid slag Edge rounding up to 1100mm width. DM1100 DC EVO deburrs and rounds inside and outside contours of thick steel parts, mainly cut with plasma or oxyfuel. The DM1100 DC is equipped with a large deburring roller for removing heavy burrs and two counter-rotating cross belts. These ensure that the edges are rounded with even and soft edges. This machine impresses with a vertically movable sanding roller to compensate for tolerances and a wide magnetic range to ensure that even small parts can be processed safely. DM1100 DC Working capacity (mm) 1100x120 No. sanding rollers (D) 1 No. of cross belt stations (C) 1 Sanding drum specifications Ø435mm 20SH Guedstzkg Uopfx Acgji Sanding belt, dimensions (mm) 1150x1520 Sanding drum speed (rpm) 185-650 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.5-4.0 Sanding drum motor (kW) 11 Cross belt motor (kW) (2x) 3 Feed motor (kW) 0.37 Total power (kW) 19 Rod suction connection per head (Ø mm) (2x) 150 Dimensions (mm) 2258x2900x2220 Weight (kg) 4100

Condition: used, functionality: fully functional, mileage: 22,000 km, power: 405 kW (550.65 HP), gearing type: automatic, fuel type: diesel, color: black, axle configuration: 6x2, first registration: 07/2024, emission class: euro6, Year of construction: 2024, operating hours: 680 h, Equipment: ABS, air conditioning, parking heater, traction control, Available from April 1, 2027. Used suction dredger directly from the manufacturer – for sale or rent. Are you looking for a used suction dredger that is readily available, technically reliable, and economically attractive? At MTS, you can get used suction dredgers directly from the manufacturer – professionally inspected, technically and visually refurbished, and ready for its next assignment. Currently Available: MTS DINO VARIO 8 m³ - SB 1612 on Volvo FH 6 x 2 Suction unit: Tested quality directly from the manufacturer 6 months warranty 1 year/500 operating hours maintenance-free Operating hours of fan: 652h Operating hours of compressor: 670h Standard equipment MTS suction unit MTS double fan MTS material separation system (patented) Automatic filter cleaning, compressed air compressor 4.5m³/min, 8 bar Articulated boom POWERARM with 7m suction hose 3 stabilization supports PLC control with optional remote diagnostics Radio remote control (brand: Gross Funk) Storage option Gjdpfx Acezvw U Usgeui Optional module options Container & lid, stainless steel lining Stainless steel design for toolboxes Articulated boom EVO-POWER ARM Rotary suction pipe system IKE/PERFOR Suction & drive & steering HYDROSTAT Electric steering Volvo Full fairing DESIGN High-tip HIGH-TIP with 4 supports (2+2) High-pressure water system 30 l/min Vibrators on the suction hose Industrial equipment Industrial package II: Gas sensor Infinitely variable speed control for fan Filtration unit for oil circuit Environmental equipment Hydraulic oil, biodegradable Noise reduction package: Sound insulation of the container exterior Accessories - Module Container with 2 pneumatic vibrators Access ladder, machine house (2x) Ladder under the hose rack Accessories - Lighting Light package II: 2 LED lights on the central joint of the articulated boom Light package III: LED light strips in the toolbox Light package V: LED lights next to the articulated boom shaft Light package VII: Fire brigade lighting 2x Light package VIII: Light bar at the rear Accessories - Safety 4 warning lights Anti-slip coating Accessories - Filter system Filter cleaning with pneumatic vibrator Accessories - Tools Vogt pneumatic shovel Atlas Copco 20 KG hammer Air lance The general terms and conditions for used vehicles of MTS GmbH apply and can be found at: saugbagger.com/allgemeine-geschaeftsbedingungen Errors and prior sale excepted. The vehicle description serves only as preliminary information. We reserve the right to change prices, equipment, and other details at any time. This information is not binding and does not create any contractual obligations.

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,658 mm, total width: 432 mm, Tested forklift battery for your forklift - 80V 4PZS 620Ah - Special tray 2 + 1-year warranty + Includes aquamatic filling system + Includes end discharge resistor & REMA 320 connector (other connector types can be fitted on request) + Capacity: minimum 90–100% (C5 capacity protocol will be provided upon delivery) + Year of delivery: 2024 Dimensions: Length 1,658 mm Width 432 mm Height 784 mm Weight: approx. 1,550 kg Suitable for the following models and more: Jungheinrich EKX 513 Toyota FBM20 Toyota FBMF16 Toyota FBMF25 Toyota/BT VCE 135 Bradshaw T20 Caterpillar EP20K Caterpillar EP20N Caterpillar EP25K Caterpillar EP25K PAC Caterpillar EP30CN Charlatte T135 Charlatte T135 EVO Combilift SL Daewoo B22/25 X-5 Daewoo B22/25 XL-7 Daewoo B25 X Daewoo B30 Daewoo B30 X-5 Daewoo B32 Daewoo B35 X Dimos EFY3004 Dimos EFY3504R Doosan B22X Doosan B22X-5 Doosan B25X-7 Doosan B30NS Doosan B30X Doosan B35NS Hubtex MD 30 Hubtex MQ 40 Guodpsy Rnq Sofx Acgoi Hubtex MQ 45 Hubtex MQ 60 Mitsubishi FB25 Mitsubishi FB25AN Mitsubishi FB25K PAC Nissan 1Q2L25Q Utiley UT3OPFE Other standard battery sizes available on request. Transport can be arranged.

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 48 V, total height: 785 mm, total length: 832 mm, total width: 631 mm, Tested forklift battery for your forklift - 48V 5PZS 775AH - DIN A + 1 year warranty + Including aquamatic (automatic watering system) + Including end discharge cable & REMA 320 plug (other plugs available on request) + Capacity: min. 90-100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length: 832 mm Width: 631 mm Height: 785 mm Weight: approx. 1,150 kg Compatible with the following models and others: Linde E 16 - 335-00 Linde E 16 - 386-00 Linde E 16 CH - 1275-00 Linde E 16 H - 386-00 Linde E 16 H - 386-02 - side battery change Linde E 16 P - 322-00 Linde E 16 P - 335-00 Linde E 16 PH - 1275-00 Linde E 16 PH - 386-00 Linde E 16 PH - 386-02 - side battery change Linde E 18 - 386-02 - side battery change Linde E 18 P - 322-00 Linde E 18 P - 335-00 Linde E 18 PH - 386-00 Linde E 18 PH - 386-02 - side battery change Linde E 18 Z - 322-00 Linde E 20 P - 335-00 Linde E 20 PH - 1275-00 Linde E 20 PH - 386-00 Linde E 20 PH - 386-02 - side battery change Linde E 20 PH EVO - 386-02 Linde EG 16 - 1275-02 - side battery change Linde EG 16 H - 1275-02 - side battery change Linde EG 16 P - 1275-02 - side battery change Linde EG 16 PH - 1275-02 - side battery change Linde EG 20 PH - 1275-02 - side battery change Linde R 20 - 1120-00 Linde R 20 G - 1120-00 Crown SC 3013 Other common battery sizes available on request. Guodpsy Rnpbofx Acgei Transport can be arranged.

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller manufacturer: Heidenhain, controller model: TNC430, overall weight: 6,000 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 32, Rapid traverse rate X/Y/Z: 50 m/min Tool holder: SK 40 Table: max. load approx. 200 kg Coolant system Chip conveyor Gsdps Agm Tbjfx Acgeui Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Disassembly, transport and proper installation – all from a single source. Billing based on individual terms and conditions and duration. Contact us for your personal offer.

Condition: used, Year of construction: 2017, machine/vehicle number: 930048019, power: 32.8 kW (44.60 HP), input voltage: 380 V, total length: 2,878 mm, total width: 1,441 mm, total height: 2,682 mm, overall weight: 1,797 kg, number of chambers: 4, number of shelf rows: 4, control type: manual, fuel type: electric, BONGARD ORION Series Electric power 4 openings on 4 baking levels 1 baking path per level Deck dimensions 800x1800mm Integrated loading elevator Total baking area 5.8 m² Year 2017 Electrical power 32.8 kW Power supply 400 V Serial No. 930048019 Electrical protection 80 A Independent ERGOCOM control per level Refractory soles, 20 mm thick Stainless steel electric heating elements Heating element protection in the arch Independent steam generator per level Individual water dosing per level Gjde Ahym Uspfx Acgeui Steam injection from the rear Anti-splatter steam diffuser Internal chamber lighting Removable glass doors Brushed stainless steel facade External dimensions 1441x2878x2682 mm Weight 1797 kg Used electric deck oven, 4 openings, BONGARD ORION EvO E801/4-180 – 5.8 m² baking area General description The used electric deck oven with 4 openings, BONGARD ORION EvO E801/4-180, is intended for bakeries and baking-pastry workshops seeking baking on fixed decks. This model, also referenced as 801/4.180 in the manufacturer's documentation, has 4 baking levels, with a baking path of 800 mm in width and a deck depth of 1,800 mm. Its total baking area of 5.8 m² allows for organizing batches on multiple levels. Designed for bread and viennoiserie production, this electric oven combines refractory decks, heating elements, and independent steam generation per level.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, operating hours: 30,000 h, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 4,500 mm, workpiece width (max.): 1,400 mm, workpiece height (max.): 180 mm, workpiece weight (max.): 200 kg, number of slots in tool magazine: 12, total height: 2,900 mm, total length: 7,000 mm, total width: 3,000 mm, overall weight: 4,260 kg, table length: 3,600 mm, table width: 1,360 mm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Year 2008, table dimensions 3600 x 1350 mm, with only 30,000 operating hours. Regularly maintained. 11 kW water-cooled 5-axis motor. 12-position tool changer. Drilling head with 30+4 spindles. 8 supports (1350 mm). Loading aids for heavy workpieces. Automatic lubrication. 250 m³/h vacuum pump. Gjdpfxo Ahy Umj Acgeui

Year of construction: 2017, condition: ready for operation (used), A CNC 5-axis hydro-abrasive waterjet cutting system C.M.S. Tecnocut is available. Working dimensions X/Y/Z: 3300mm/1705mm/150mm, table dimensions X/Y: 3700mm/2050mm, max. table load: 1000kg/m², rapid traverse: 40m/min, pump: CMS GreenJet Evo Electric, max. operating pressure: 4139bar, power: 34kW. Overall system dimensions X/Y/Z: approx. 5700mm/2550mm/3900mm, weight: approx. 11200kg, operating hours: approx. 1500h. The system is fully equipped except for a clamping unit for pipes. Documentation available. An on-site inspection is possible. Godpfxezc Rc Tj Acgsui

Condition: used, mileage: 25,900 km, power: 375 kW (509.86 HP), first registration: 01/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, * Mercedes Benz Arocs 3251 suction excavator * First registration: 01-2023 * Suction excavator MTS Dino 12 * Stainless steel cladding * Hydrostatic drive for suction, driving, and steering * Articulated boom EVO Power ARM Gen2 * 2 x turbine * Operating hours turbine: 1,058 h * Operating hours compressor: 943 h * DINO 12m³ container * Stainless steel lining throughout * Articulated boom EVO-POWER ARM GEN2 * Rotary suction pipe system IKE/PERFOR * Hydrostat-RPM15 * Full cladding DESIGN * High-pressure water system 30 l/min * Hydraulic oil, biodegradable * Aluminum fenders Godpfx Acjz I Ic Dogoui * Storage box made of stainless steel on the frame * Container with 2 pneumatic vibrators * Ladder under the hose rack * Light package I: 3 LED lights on the vehicle frame * Light package II: 2 LED lights on the central joint of the articulated boom * Light package III: LED light strips in the tool box * Light package IV: Cable reel * Light package VIII: Light bar at the rear * 4 warning lights (switchable at the rear) * Anti-slip coating on the lid * Ball head trailer coupling 3.5t * More pictures and videos via WhatsApp * Subject to change and prior sale. No guarantee.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, This vertical machining center, including the "Clamex unit," is for sale and has only a few operating hours. The machine is being sold because we have switched to a nesting machine. In 2021, the machine was upgraded with a more powerful vacuum pump (16.3 m³). The machine also includes various vacuum clamping devices; we purchased several larger plates in addition to the standard equipment. Workpiece size: X = 200 - 3200 mm (longer with additional support) Y = 70 - 1200 mm (= max. clearance) Material thickness: Z = 8 to 70 mm Max. contour milling dimension in the X-direction without clamping: X = 1500 mm Max. contour milling dimension in the Y-direction: Y = 985 mm ./. milling cutter radius Max. drilling dimension horizontally in the X-direction: H = 1168 mm Z-axis travel: Z = 240 mm Maximum programmable speed: Vector speed: 68 m/min X = 25 m/min, Y = 60 m/min, Z = 20 m/min Milling head 7830, power: 7.5 kW (S6), air-cooled with HSK-F 63 tool holder n(max.) = 1000 - 24,000 min-1, continuously adjustable with collet chuck with HSK shank, ceramic ball bearings (hybrid bearing), tool weight max. 6 kg (incl. holder) Tools: max. Ø 110 mm, tool length max. 80 mm Tool changer 7887, 6-position magazine - pick-up system, pneumatic Max. Ø tool: Ø 110 mm Maximum tool weight: > 5 kg per tool or 30 kg when fully loaded Can be equipped with collet chuck with HSK shank Tool changer 7874, 1-position aggregate magazine, swiveling in X and Y direction, only for special bevel gear 7869 with HSK holder Vertical spindles can be individually activated Arrangement in L-shape, 5 in X and 4(5) in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: Alternating clockwise/counterclockwise n(max.) 1000 - 4400 min-1, continuously adjustable Holder: M 10 thread - interference fit 11 mm without tool, without holder 6 horizontal spindles 2 double drilling spindles in X direction 1 double drilling spindle in Y direction Holder: M 10 thread, interference fit 11 mm Total drill length max. 63 mm from the mounting end without tool, without holder Sawing unit Integrated sawing unit for sawing/grooving in X direction n(max.) 1000 - 5650 min-1, continuously adjustable Tool holder: A max Ø = 120 mm, I Ø = 20 mm, B = max. 4.0 mm 4-axis "CLAMEX" tool set - Includes original tool set consisting of 2 pcs. P-system grooving cutter, DP (diamond) 100.4x7x30mm, Z3, NLA 4/6,6/48mm 1 pc. Milling mandrel for P-system grooving cutter S20x50mm, d=30, L=102, DTK 48mm 1 pc. Milling mandrel for P-system grooving cutter S16x55mm, d=30, L=68, DTK 48mm 1 pc. CNC drill 6mm for Clamex P L= 57.5 / shank 10x27 / left 1 pc. Adapter for drill with shank d= 10 mm (left) Gedpfjz In Ugex Acgsui 1 pc. Collet DIN 6388 form B, double slit, size 25 Clamping diameter 20, for HSK-F 63 holders Drilling unit: Drill Ø5, 6, 8 mm 35mm pot band 20mm countersink Drill horizontally + vertically: 8mm Milling cutters: 8mm Dia NL32mm 16mm Dia NL43mm 16mm Dia NL9mm 20mm insert NL55mm

Condition: good (used), Year of construction: 2000, operating hours: 53,776 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, rotary table diameter: 500 mm, rotational speed (max.): 18,000 rpm, For sale is a 5-axis simultaneous milling machine from Deckel Maho, model DMU 50 eVolution. The machine is in good condition and ready for immediate use. Technical Data: Year of manufacture: 2000 Control: MillPlus Power-on hours: 53,776 h Spindle hours: 18,512 h X-axis: 500 mm Y-axis: 400 mm Z-axis: 380 mm B-axis: 0-180° Gedpfxswxd Ags Acgeui C-axis: 360° Clamping surface: Ø 500 mm Max. table load: 200 kg Spindle taper: SK40 Max. speed: 18,000 rpm Spindle power: approx. 15 kW Tool magazine: 60 slots Dimensions: approx. 3,400 x 2,400 x 2,500 mm Weight: 5,500 kg Transport and loading can be arranged Europe-wide at an additional cost upon request. Prices are subject to VAT. Viewing possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell your equipment? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2017, functionality: fully functional, LINEAR PET BLOWING MACHINE SET with auxiliary equipment Gusdpfx Acequuvregji AC ARCOR - multiBlow2 - 2017 Speed: 1,5L - 6000 Cavities: 4 Formats: 0,1 - 3,0L AUXILARY EQUIP 1. Chiller - M.T.A S.p.A - TAE EVO 051 2. LOW Pressure compressor - SHAMAL 45kw Unit price: 2000 eur / There are 3 units in total. 3. Dehumidifier Unit price: 300 eur / There are 3 units in total. 4. Receiver tank - Low pressure - MAX 16Bar 5. Receiver tank - High pressure - MAX 45Ba

Condition: good (used), functionality: fully functional, machine/vehicle number: VAVJS1339RH529050, empty load weight: 7,750 kg, maximum load weight: 31,250 kg, overall weight: 36,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2024, next inspection (TÜV): 11/2026, loading space length: 13,400 mm, loading space width: 2,470 mm, loading space height: 2,750 mm, loading space volume: 89 m³, suspension: air, tire size: 385/65 R 22.5, color: white, trailer brake: trailer braked, Year of construction: 2024, Equipment: ABS, our vehicle number #31042 3x SAF axles Tire size 385/65 R 22.5 Permissible total weight 39,000 kg Payload 31,250 kg Unladen weight 7,750 kg Body dimensions i.e. L: 13,400 mm W: 2,470 mm H: 2,750 mm V: 89 m³ Color Pure white RAL 9010 Mileage 119,995 km Lift axle A1 + A3 Portal doors Disc brake Cargo Floor XD X-treme Durable, 7 mm electric roll cover "Quick TOP" Cleaning door front left Moving wall simple external twist locks Alcoa DuraBright EVO aluminum rims Wabco Smart Board RSS (Roll-over Stability Support) ABS/EBS Raise/Lower Telematics "LOCAL TRAC" Tire pressure monitoring Rear view camera Remote control pneumatic door locking Jost fifth wheel LASi EN 12642 XL Forklift accessible, 8 tons Side protective cover left Platform with ladder LED lighting various accessories Protective flap for rear lights Side UFS (Underride Protection System) 2x W-box 1x water tank Broom holder Gusdpfx Acozp Hxcsgoi NATO canister Financing possible upon request!!!

Condition: good (used), Year of construction: 2013, operating hours: 630 h, fuel type: electric, Manitou 80VJR Evolution Articulating Boom Lift, Mast Lift, Electric, 7.65m Working Height, 2013 A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. Guodpfxo Aipz Ej Acgoi All our deliveries are at trade prices and in AS-IS condition without any guarantees (see our general terms and conditions). You can arrange a non-binding appointment for a viewing and/or test drive. Please call in advance; we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: new, Year of construction: 2026, operating hours: 1 h, Radio-controlled carrier vehicle with forestry mulcher – vehicle in preparation. The Energreen RoboEVO is a radio-controlled carrier vehicle that can also be used in particularly difficult and hard-to-reach terrain with slopes of up to 55°. It is equipped with a powerful 40 hp diesel engine and two double-acting hydraulic control units to ensure compatibility with various attachments. * 150m range of the radio remote control * Optimal maneuverability * Traction in all directions up to 55° * Special oil pan for safe engine lubrication * Multifunctional use * High performance, fast completion of work * Best traction on any surface Special equipment: Guodpfxsv R E Hfo Acgei * Hydr. quick couplings "CEJN" * Radio remote control EU DUAL BAND with tilt sensor * Bio-hydraulic oil PANOLIN HLP SYNTH 46 * Standard color Orange RAL 2011 / Grey RAL 7021 * Rear radiator guard * Counterweights Comp. 70 kg * 2 LED work lights * LED rotating warning light 12 Volt with bayonet fitting * Pre-installation for hyd. winch Attachment: Forestry mulcher Forestry Head 130H with hydr. quick couplings "CEJN", rotor with hammer flails and material guide frame. Robust, reliable forestry mulcher made of Strenx® steel, ideal for cutting grass, bushes and reeds up to a diameter of 4 cm. Rotor with flails for shredding the cut material. TECHNICAL DATA Cutting width: 1200 mm Oil pressure: 290 bar Number of tools: 22 Oil flow: 55 l/min Hydraulic motor: 23 cm3 Weight: 355 kg We have other grass mulchers, forestry mulchers, brush cutter heads, and a stump grinder in stock. Other attachments such as double knife bars, mowing booms, and many other attachments are available on request! We would be happy to offer you a suitable financing, rent-to-own or leasing option. Delivery or shipping by arrangement. We always have a selection of used and new equipment in stock, and more equipment for demonstration. Please contact us! We also rent out all equipment with or without an operator. Other notes: * Trade-in and purchase of vehicles and machines possible. * Selling price excluding transport * No liability for printing and typographical errors. * Errors, changes and prior sale reserved. * Offer subject to change. * Photos may vary. Price applies to existing condition. * All information without guarantee. Further information Engine power: 41 hp (30 kW) Price: On request

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 500 mm, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMU 50 eVolution was manufactured in 2001. It features a Heidenhain MillPlus control unit and a tool magazine capacity of 32 tools, utilizing an SK 40 taper. The machine is equipped with an internal coolant supply system for efficient cooling. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 50 eVolution vertical machining centre we have for sale. Contact us for further details. Gujdpfxe Ai E Tns Acgsi - Control System: Heidenhain (control panel per photo)- Tool Magazine: 32 pockets, SK 40 taper- Equipment / Accessories: Internal Coolant Supply (IKZ), tool breakage monitoring, measuring probe, coolant system with pumps- Automation: Indunorm / Indumatik ultralight loading system (pallet / vise storage)- Power Connection: 400 V / 50 Hz- Power Rating: 50 kVA- Max Current: 71 A- Fuse Protection: 80 A- Operating Hours: 81,460 h (Counter 6P1 - Machine On / Control On) and 44,096 h (Counter 19P1 - Spindle / Working Hours)

Condition: used, Year of construction: 1991, Automatic metal sawing machine with hydraulic workpiece clamping, automatic material feed, and control panel for series processing of metal profiles and solid materials. Manufacturer: KASTO Machine type: Fully automatic sawing machine Year of manufacture: 1991 Operating mode: Automatic Material feed: Automatic Workpiece clamping: Hydraulic Clamping device: Vise I and Vise II Guedpfx As Aiccajcgoi Feed: Adjustable rapid feed Operation: Central control panel Cutting length setting: Via preset counter Coolant system: Available

Year of construction: 2024, condition: used, (1) Inverted Fluorescence Microscope, (1) Touchscreen Monitor, (1) Objective 4x (EVOS, Cat. 4980), (1) Objective 10x (EVOS Plan FL PH 10x/0.30, Cat. 4981), (1) Objective 20x (EVOS, Cat. 4982), (1) LED Cube (Invitrogen EVOS LED Cube, GFP 2.0), (1) Vessel Holder (AMEPVH001), (1) Accessory Box with Consumables, (1) Laptop (Dell), (1) Keyboard (Dell), (1) Mouse (HP) Technical Details: Data Fluorescence Microscope REF AMF5000 DC input 12 V, 5 A EN61326, Class A Radiated Emissions Software version 1.6.1899.478 Firmware App: 1.0.13919 / BL: 2.1.8198 Epi firmware App: 1.0.8198 / BL: 2.1.8198 Gusdpfs Akckwjx Acgsi Camera firmware 1.22.3.00 Light channels: DAPI, GFP, TRANS, RGB TRANS Phase ring: 4x/10x Objectives 4x, NA 0.13, LWD, Phase 10x, NA 0.30, LWD, Phase 20x, NA 0.45, LWD, Phase

Condition: used, machine/vehicle number: 005608, Position 1: Roller Conveyors STEFANI-EVOLUTION SB ONE Position 2: Single Edgebanders STEFANI-EVOLUTION SB ONE Position 3: Roller Conveyors STEFANI-EVOLUTION SB ONE Position 4: Single Edgebanders STEFANI-EVOLUTION SB ONE Position 5: Roller Conveyors STEFANI-EVOLUTION SB ONE Godpjiii Izofx Acgjui