Used Etr 4 69 A for sale (40,178)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) Gkodpfjguk Dvjx Ahzsd - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Year of construction: 2020, 1. WEISCHAUPT WM-G10/4-A (with gas line) - Power: 100-1100 kW - Model: ZM-LN - Year of manufacture: 2020 Gsdpfx Aowgyrtohzjkd 2. WEISCHAUPT WM-G10/3-A (with gas line) - Power: 100-1000 kW - Model: ZM - Year of manufacture: 2013

Year of construction: 1980, condition: used, Sharpening TOOL VOLLMER FINZ 4-800 Gjdpfxscw Dg Ds Ahzjkd Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type negotiated Description Comments GRINDING AUTOMATIC CIRCULAR SAW WIDIOWYCH THE HYDRAULIC

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 34,000 mm, shelf height: 3,500 mm, support length: 2,700 mm, shelf length: 8,500 mm, frame height: 3,500 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 4, pallet spaces: 108 euro pallets, 4 rows of pallet racks (4 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 2 beam levels, shelf load 3000 kg. - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement. Gsdpsv Ukz Ajfx Ahzskd

Condition: good (used), For sale: individual pieces of original deep hole drilling bits by Botek (Germany) – a renowned manufacturer of precision tools for metalworking. Single-lip drills (single-edge) with internal cooling, made from K15B carbide – very hard and wear-resistant. • Diameters from 3.0 mm to 10.2 mm • Working lengths from 150 mm to 480 mm Gkjdpewg R I Eofx Ahzsd • Internal cooling through the body • Material: K15B carbide (ultrafine grain) • For steel, stainless steel, aluminum, bronze, and engineering plastics The drills are designed for precise deep hole drilling with high dimensional stability. Applications include the aerospace, automotive, hydraulic industries, and toolmaking. Condition: New and used (pre-owned), but in good technical condition. Some items may require resharpening – an ideal base for professionals. //// PRICE SHOWN IS PER PIECE ////

Condition: excellent (used), Masini de rectificat centerless . Diferite dimensiuni si marci . Lichidare stoc . Masina de rectificat bed 5 . Piatra conducatoare de 250 mm . Alimentator automat . Pret 6000 euro . Gkjdpfxsw U N Avs Ahzed Masina de rectificat bed 4 alimentator automat , pret 5500 euro . Masina de rectificat heminhausen Sr 4 . Piatra conducatoare de 250 mm , alimentator automat . pret 5500 euro .

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Gkodpfxjguk A Hj Ahzed Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: new, SALES FROM STOCK Loading Capacity: 240 kg Max Platform Height: 4 m Occupants: 1 Platform Dimension: 1.15 x 0.6 m Overall Length: 1.32 m Overall Width: 0.76 m Overall Height: 1.92 m Platform Extension: 0.55 m Extension Load: 100 kg Up/Down Speed: 34/25 sec Turning Radius: 0 Maximum Slope: 1.5°/2° Drive Tyres: 230 x 80 mm Gradeability: 25% Wheel Base: 1.0 m Travel Speed (Stowed): 4 km/h Travel Speed (Raised): 0.5 km/h Battery: 2 x 12 V / 100 Ah Lifting Motor: 24 V / 1.3 kW Drive Motors: 24 V / 0.5 kW Charger: 24 V / 15 A Weight: 660 kg Proportional Controls Automatic Pothole Protection Drivable At Full Height Non-Marking Tyres Automatic Brake System Emergency Lowering System Emergency Stop Button Cylinder Holding Valve Gkodpfsulah Nox Ahzod Onboard Diagnostic System

Year of construction: 1994, condition: excellent (used), 4 side planer 8 8 HARBS heads long table going 3 meters. Machine weight 5500 kg Godpsl Dw Nxsfx Ahzekd cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm.

Condition: ready for operation (used), functionality: fully functional, 4 printing units 12 " Gedpfxjwhqnzo Ahzekd water cooling unit 2 perforated units It is in good condition in production

Condition: used, Year of construction: 2011, Technical details: Rated capacity: 63 kVA Revolution per minute: 1500 U / min capacity: 50 (Wärmetauscher) KW type of fuel: (Erd) Gas Number of working hours: 87021 h weight: ca. 2300 kg dimensions L x W x H: ca. 3,0 x 1,0 x 1,8 m CHP compact module (heat exchanger module) soundproofed with electric cabinet Engine: MAN; type E0834 E302; Gas-Otto 4-stroke engine, 1500 rpm; power mech. 54kW, ignition control unit Motortech MIC 500 (MIC 520) Generator: Leroy Somer; type LSA 43.2 8; type output 87 kVA; 1500 rpm; voltage 400V Heat exchanger module: Heattransfer, engine cooling water output 46kW; exhaust gas heat output 33kW; total heat output via plate heat exchanger = 79kW Connections for gas inlet, flue gas outlet, condensate drain and heating water on the side. Godpfx Aju Nvp Sjhzjkd with exhaust gas top *

Condition: good (used), Haussler Stone Oven Model - INO 2000/4 Godevz Dv Topfx Ahzjkd 230 volt power Heavy fire brick baking chamber 122°–608° F temperature range Excellent design Made in Germany In excellent condition

Year of construction: 2009, condition: excellent (used), Used very clean & fully serviced Bystronic Afm 160 4metre x 160ton cnc pressbrake for sale: Model: Afm 160 / 4 Make: Bystronic Year 2009 Gsdpfen E Tr Ssx Ahzjkd Cybelec 880S cnc control Working length mm: 4100mm / 4metre Max. press force kN: 1600 / 160ton 2 axis back gauge – R and X axis 4 axis in total With crowning Machine will come with tooling

Condition: good (used), Year of construction: 2001, Max Mueller MDW 20 (4) CNC Slant Bed Lathe With Siemens 840D Control Gkjdpfx Ajxq Emnehzod Rohm Duro-NC 500/3 Ø500mm 3 Jaw Power Chuck. Maximum Turning Ø850mm. Maximum Swing Over Cross Slide Ø690mm. Maximum Turning Length 1,500mm. Centre Height 450mm. Maximum Workpiece Weight 800kg. Spindle Bore Ø128mm. Axis Travel 'X'=510mm, 'Z'=1,510mm. Rapid Traverse 'X'=10m/min, 'Z'=10m/min. Maximum Turning Speed 1,950rpm (60kW Motor). 30 Position Carousel. S/No. 504237 (2001). With Renishaw LP2H Tool Setter, Chip Conveyor, Coolant System, Filtermist F28/8 Mist Extraction Unit, Powered Pneumatic Door, Foot Switches, Signal Tower & Manuals. Overall Dimensions L5,270 x W2,300 x H2,750mm. Weight 17,000kg. Note: Control Needs Attention, Tooling Shown In Photo's Not Included.

Condition: used, Year of construction: 2022, operating hours: 3,082 h, machine/vehicle number: PEE2680527, fuel type: diesel, power: 43 kW (58.46 HP), motor manufacturer: Yanmar, Field of application: Construction Empty weight: 936 kg Gsdpfx Asxwinpshzekd Transport dimensions (LxWxH): 2.2x1.02x1.42 Please contact PFEIFER GROUP for more information

Condition: good (used), mileage: 435,875 km, power: 380 kW (516.66 HP), first registration: 05/2011, fuel type: diesel, color: red, fuel: diesel, brakes: engine braking, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2011, Equipment: air conditioning, cruise control, soot filter, spoiler, Technical information Number of cylinders: 6 Drivetrain AdBlue system: Yes Axle configuration Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle 1: Double wheels; Suspension: air suspension Rear axle 2: Lift axle; Steering; Suspension: air suspension Weights Empty weight: 11.940 kg Carrying capacity: 14.060 kg GVW: 26.000 kg Condition Technical condition: good Visual appearance: good Gksdpfsvtyr Ujx Ahzod

Condition: used, x-travel 500 mm y-travel 380 mm z-travel 350 mm speeds 20 - 5000 U/min table surface area 800 x 355 mm tool taper SK 40 control HEIDENHAIN TNC 124 total power requirement 6,0 kW weight of the machine ca. 1800 kg dimensions of the machine ca. 2210 x 2680 x 1965 mm From a training center (“Daimler Chrysler AG”) Completely overhauled in 2006 for approx. 33,000 euros Includes new HEIDENHAIN “124” control Very little use since overhaul (!!) Operating hours – “machine ON” only: 10,407 hours Features: - Electric CNC universal tool milling machine - HEIDENHAIN TNC 124 linear control (installed in 2007) * Swiveling control panel, front right of the machine - Electro-hydraulic tool changer - Vertical milling head - ISO 40 with vertical work spindle * Manual spindle feed .. 50.0 mm * Scale ring for reading the quill adjustment - Horizontal work spindle incl. counterholder - Rapid traverse feed X-axis .. 0 - 4000 mm/min - Rapid traverse feed Y-axis .. 0 - 2000 mm/min - Rapid traverse feed Z-axis .. 0 - 4000 mm/min - Central lubrication, electric - Pneumatic minimum spray device (lubrication system) - Coolant device - Machine stand with base - Machine light - Original operating instructions + circuit diagram + acceptance report, etc. Gkjdpjvuz Rujfx Ahzed

Condition: good (used), Flat geared motor, geared motor, electric motor, electric geared motor, flat geared motor, flat geared motor -Manufacturer: Nord, flat geared motor -Type: SK 2080A-80 L/4 i= 10.27 -Speed: 136 rpm -Engine: Type SK 80 L/4 -Power: 0.75 kW / 1380 rpm -Hollow shaft: Ø 30 x 100 mm Protection class: IP54 Gkedpfxst E D Exs Ahzod -Dimensions: 320/290/H205 mm -Weight: 20 kg

Condition: used, Year of construction: 2022, operating hours: 3,280 h, machine/vehicle number: PEE2681178, fuel type: diesel, power: 43 kW (58.46 HP), motor manufacturer: Yanmar, Field of application: Construction Godexwincjpfx Ahzjkd Empty weight: 936 kg Transport dimensions (LxWxH): 2.2x1.02x1.42 Please contact PFEIFER GROUP for more information

Condition: good (used), mileage: 452,779 km, power: 279 kW (379.33 HP), first registration: 04/2011, fuel type: diesel, color: red, axle configuration: 6x2, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2011, Equipment: air conditioning, cruise control, soot filter, spoiler, Drivetrain AdBlue system: Yes Axle configuration Gksdpfxoxd Uvxj Ahzod Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle 1: Double wheels; Suspension: air suspension Rear axle 2: Steering; Suspension: air suspension Weights Empty weight: 11.940 kg Carrying capacity: 14.060 kg GVW: 26.000 kg Condition Technical condition: good Visual appearance: good

Condition: good (used), Valve manifolds, multipole connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, valve manifold -Solenoid valves: Type 525179 MHP4-MS1H-3/2G-1/4 RR-FTO-KC-2018-1055 -Battery block: MHA4-PR4-3-1/4 525235 Gsdpfx Aexvyibshzokd -Individual components: see photos -Number: 3x valve manifolds available -Price/Fee: per unit -Dimensions: 260/155/H100 mm -Weight: 2 kg/pc.

Condition: used, Year of construction: 2023, operating hours: 346 h, machine/vehicle number: S65XCM-2046, mast type: telescopic, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Empty weight: 12.980 kg Lifting capacity: 454 kg Working height: 2.200 cm Max. horizontal reach: 1650 m Transport dimensions (LxWxH): 9.76x2.49x2.81 Please contact PFEIFER GROUP for more information Gkedpotr Nwwofx Ahzsd

Condition: used, Year of construction: 2022, operating hours: 440 h, machine/vehicle number: S45XCD-556, mast type: telescopic, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Empty weight: 7.903 kg Lifting capacity: 227 kg Working height: 1.600 cm Max. horizontal reach: 1100 m Transport dimensions (LxWxH): 6.8x2.3x2.44 Please contact PFEIFER GROUP for more information Gjdpfxjtr Hlve Ahzekd

Condition: used, Year of construction: 2022, operating hours: 1,628 h, machine/vehicle number: S65XCM-1512, mast type: telescopic, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Empty weight: 13.025 kg Lifting capacity: 454 kg Working height: 2.180 cm Max. horizontal reach: 1650 m Transport dimensions (LxWxH): 9.76x2.58x2.81 Please contact PFEIFER GROUP for more information Godjtr Nnkjpfx Ahzekd

Condition: used, Year of construction: 2022, operating hours: 762 h, machine/vehicle number: S45XCD-557, mast type: telescopic, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Empty weight: 7.903 kg Lifting capacity: 227 kg Working height: 1.600 cm Max. horizontal reach: 1100 m Transport dimensions (LxWxH): 6.8x2.3x2.44 Please contact PFEIFER GROUP for more information Godpfxjtr Nvro Ahzskd