Used Est Ticino for sale (35,031)

Condition: ready for operation (used), Year of construction: 2009, Immediately available from site: CNC Lathe Westekemper Psdpfx Ahjxqbbue Torc Type West Turn 1740 NC Year of manufacture 2009 CNC control FAGOR 8055 CNC Swing over bed: 400 mm Swing over cross slide: 235 mm Centre distance: 1000 mm Spindle bore: 86 mm Spindle speeds: 10 – 2000 rpm Drive: 7.5 kW Tailstock: MK 5 Tailstock quill travel: 160 mm Lots of accessories Price: €5,500 plus VAT ex location

Condition: used, • L = 1550 mm • W = 1000 mm • Glass support 800 mm Prjdpfsxp Ax Sox Ah Tsc • 14 units available

Condition: good (used), Centre height: 195 mm Distance between centres: 1250 mm Max. swing diameter over bed/cross slide: 400/265 mm Podpfxjxlg Dwo Ah Terc Spindle mount/bore: Camlock D1-6"/54 mm Tailstock quill taper: MT 5 Spindle speeds steplessly adjustable in 3 ranges: 0 - 2500 rpm Longitudinal feeds: 0.018 - 1.2 mm/rev Cross feeds: 1/2 of longitudinal feeds 51 metric thread pitches: 0.2 - 14 mm 56 imperial (inch) threads: 2 - 56 TPI 20 module threads: 0.2 - 3.5 module 20 diametral pitch threads: 8 - 56 DP Electrical connection: 400 V, 7.5 kW Weight: 1500 kg Space requirement: 2500 x 1300 x 1300 mm

Condition: used, No. 04491 Mobile extraction unit / Mobile dust extractor ESTA Dustomat HMS 10 WN Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 550 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Prjdpfx Ahjxnqaus Tjc Terms of delivery: ex warehouse

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: limited functionality, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), empty load weight: 4,000 kg, volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Prjdpfxsu Thh Ej Ah Tsc Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating ins3.641tructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2019, condition: excellent (used), Machining centre, downstream centre for plastic profiles model PBZ4, from right to left incl. infeed and outfeed table, screw magazine and reinforcement screwdriver, 8 motors for various operations, WINDOWS control Pjdpfjxqzznex Ah Torc

Condition: excellent (used), Year of construction: 2000, Colchester Student 2500 3-axis digital readout Collet chuck setup Prjdpfx Aew R S Awjh Tjc Various accessories

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Max. air flow rate 2900 m³/h Inlet diameter 200 mm Max. negative pressure 3500 Pa Drive power 4.0 kW Filter area 24 m² Filter elements 2 pcs. Dust collection bin 38 l Dimensions 1,660 x 840 x 1,640 (L/W/H) mm Weight 310 kg Sound pressure level 72 dB(A) Metal chips Metal dusts Plastic dusts Plastic chips Cotton dusts Paper dusts Podpexnrxxsfx Ah Tsrc Welding fumes Soldering fumes

Condition: used, functionality: fully functional, roll diameter: 50 mm, roll width: 580 mm, total width: 665 mm, total height: 220 mm, total length: 2,990 mm, conveying length: 2,800 mm, TAF article number: 1000003717 Manufacturer: Best Conveyors Year of construction: unknown Overall dimensions: approx. 2,990 x 665 x 220 mm (LxWxH) Cheek width: 2 mm Cheek height: 220 mm Prodpfouq Hrlex Ah Tsc Conveyor length: 2,800 mm Conveyor width: 580 mm Roller type: Steel Rollers per axle: 1 piece Roller pitch: 100 mm Roller diameter: 50 mm Drive: Gravity Condition: Used / fully functional Function test: OK

Condition: used, No. 04489 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 61 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts in zone 22 400 V, 3 kW, with power cable and plug Nominal air volume flow 1850 m3/h Extraction pipe connection diameter 160 mm Filter surface area 9.6 m2 Filter cleaning by hand crank Filter dimensions approx. 720 x 510 mm Chip container 860 x 570 mm Mobile unit CE-compliant Including new replacement filter Operating instructions available Transport dimensions approx. 1700 x 800 x 2100 mm LWH Weight approx. 250 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Prjdpoxnprcsfx Ah Tjc For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2011 (38.761 h), 2007 (52.386 h), 2007 (52.998 h) und 2007 (55.325 h) stand operating hours counter November 2021 Throughput volume 130 m³/hour Podpfou Tha Isx Ah Tsrc Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The four PZA cardboard shredders were in use in a Dutch logistics centre until 15 December 2021 to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 4 pieces Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredders were an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machines are in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, fixed bezel / 5155) SPH 370 mm Inner diameter 320 mm GES. Height 860 mm Prodpfx Asdb Unvsh Tec GES. Width 830 mm Foot width 500 mm Base depth. 170 mm

Condition: excellent (used), Year of construction: 1999, • FANUC 210i - T control (cycles) • Max. distance between centers: 1,250 mm • Max. turning diameter: 400 / 585 mm in offset • Spindle speed: 12 . . . 2,500 rpm Psdpfjw S E R Rsx Ah Torc • Spindle bore: 54 mm • X-axis: 210 mm • Z-axis: 1,181 mm • Cutting gap adjustment: 0.05 – 0.8 mm • Motor power: 7.5 kW • Weight: approx. 2,700 kg

Condition: good (used), Included in the scope of delivery: 01x Stackable wire mesh frame, used Total weight: 27.23 kg Color: blue Total width: approx. 600 mm Total depth: approx. 800 mm Total height: approx. 950 mm Usable height: approx. 800 mm Opening size: approx. 550 x 520 mm (W x H) Mesh size: approx. 50 x 50 mm Wire thickness: approx. 3.00 mm Tube profile: approx. 22 mm Consisting of 2 foldable side panels! 01x One-way pallet, used Total width: approx. 600 mm Total depth: approx. 800 mm Height: approx. 150 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Predpfew Rvtajx Ah Tec This item is offered for collection only. Any requested transport or shipping of this item will incur additional costs, which can be quoted separately depending on the delivery location and scope.

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER SS 71 or SS 56 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. Predpfx Aow Eu Akoh Tsc 1 set of upper guide shoes, bore 110 mm Ø, height 250 mm 1 set of lower guide shoes for bearing 6210 for SS 56

Condition: used, cut-off saw 1,85 KW Spindle diameter 40 mm Spindle length 130 mm power main drive with 4,4 kW Festo slotting machine ZA ----- with crosscut saw 1 slotted spindle ZA length stop Predpfexmk D Dox Ah Toc For sale on behalf of the customer in the IS condition!

Condition: used, Year of construction: 1990, Motor power: 1 kW Filter area: 2500 mm x 1600 mm Exhaust connection: 300 mm Power consumption: 2.3 A Weight: approx. 120 kg Podpfewv Nbcsx Ah Terc

Condition: used, fixed bezel (5153) SPH 380 mm Pjdpfx Aedb Ungoh Tsrc Inner diameter 320 mm Foot width 500 mm Base depth 170 mm GES. Height 860 mm GES. Width 800 mm

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: C535, spindle bore: 102 mm, turning length: 2,000 mm, turning diameter over bed slide: 554 mm, center height: 284 mm, spindle speed (max.): 1,800 rpm, No reserve price – guaranteed sale to the highest bidder! Payment deadline for the machine is 20/11/2025! Bidding obligates prompt collection between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Swing diameter over cross slide: 370 mm Swing diameter over bed and carriage wings: 554 mm Swing diameter in the gap: 830 mm Turning length: 2,000 mm Centre height (over bed): 284 mm Length in front of face plate: 196 mm Spindle centre height from floor: 1,238 mm Max. working length between centres: 2,152 mm Maximum spindle speed: 1,800 rpm Centre distance: 2,032 mm Spindle nose: D1-11 CAMLOCK Spindle bore taper: No. 5 MT Spindle bearing diameter: 145 mm Spindle bore: 102 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,800 x 1,800 mm Total weight: 4,250 kg Prodpfx Aexm Sm Heh Toc EQUIPMENT Toolpost

Condition: used, Year of construction: 1975, - 3-jaw lathe chuck Ø 400 mm - 4-jaw faceplate Ø 600 mm - Grinding attachment Ø 200 mm - Multifix - Change gears - Operating instructions & documentation - Year of manufacture 1975 Working area: - Center height: 300 mm - Swing over bed: 620 mm - Swing in the gap: 800 mm - Swing over the cross slide: 360 mm - Length of gap: 407 mm - Distance between centers: 1000 mm - Max. workpiece weight between centers (without steady rest): 1800 kg Main spindle: - Spindle head: 8 DIN 55022 - Spindle bore: 83 mm Predpfx Aowdxmqeh Tjc - Internal taper: Metric 90 - Center punch: MK5 Tailstock: - Quill stroke: 180 mm - Quill diameter: 85 mm - Quill inner taper: MK5 Clamping fixtures: - Faceplate diameter: 600 mm - Max. chuck diameter: 410 mm Main spindle speeds: - Number of steps: 18 - Range: 14 - 1000 rpm Feed rates: - Lengthwise feed: 0.086 - 4.866 mm/rev (66) - Cross feed: 0.040 - 2.258 mm/rev (66) - Cross slide travel: 375 mm - Top support travel: 210 mm Thread pitches: - Metric threads: 0.5 - 28 mm (66) - Inch threads: 1 - 56 dpi (66) - Modular threads: 0.25 - 14 mm (66) - Diametrical pitch thread: 2 - 112 dpi (66) Installation: - Motor power: 15 kW - Operating voltage: 400 V - Dimensions W x H x D: approx. 2950 x 1400 x 1400 mm - Weight: approx. 3100 kg

Condition: good (used), Year of construction: 1994, functionality: fully functional, space requirement height: 2,440 mm, overall weight: 1,480 kg, pressure: 2 bar, total width: 1,300 mm, total length: 1,850 mm, total height: 1,650 mm, filter area: 0.75 m², operating temperature: 200 °C, 0.75 m3 enameled steel 760 liter capacity Filter chute Suction chute Nutsche Pressure filter Estrella AG Year of construction: 1994 Diameter: 1000 mm Filter surface: 0.75 m2 Permissible operating pressure: -1/+2 bar Pjdpfx Aou U Afujh Tjrc Permissible operating temperature: -10/+200 °C Supporting structure: upright on feet with substructure Opening: hydraulic opening aid Enamel quality: color blue Enamel 2000 Estrella Total volume: 760 liters Total height open: 2440 mm Height closed: 1590 mm L x W 2000 x 1300 mm

Year of construction: 1983, condition: used, Power: 18 kW (24 HP) Power: 17.5 w Volume: 170 l Manufacturer: Manesty Model: Accela-cota 150 Pjdjvly H Aopfx Ah Tsrc Year : 1983 Type: film and sugar coating unit Technical file available Classification: ATEX EEx (to be requalified) Coater Useful volume: approx. 170 L Maximum weight: 150 Kg Diameter of drum: 1219 mm / 48″. Rotation speed: 2.5 – 15 rpm Cabinet with frequency converter Air treatment unit Air volume: 2890 m3/h Temperature : 0-80°C Steam pressure : 2 – 5 bars Steam consumption : 145 kg/h Fan motor power : 0.75 KW Fan (not original) Power : 17,5 KW

Condition: excellent (used), Swing over bed 360 mm Distance between centers 650 mm Spindle speeds 20-3250 rpm Prodorx Rwnepfx Ah Tec Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Swing over bed 400 mm Distance between centers 650 mm Spindle speeds 0-2500 rpm Prodpfxeq Dll De Ah Tec Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Swing over bed 433 mm Distance between centers 1500 mm Predpfx Aewuflbsh Tec Spindle speeds 20-1600 rpm Misc. accessories MARCELS MASCHINEN CH