Used Embossing Press for sale (12,219)

Condition: new, pressure 100 t stroke 380 mm table surface area 1740 x 996 mm pressure 258 bar ajustment speed 7,54 mm/sec work speed 2,47 mm/sec return speed 9,06 mm/sec dayligth 700 mm table height 720 mm total power requirement 2,2 kW weight of the machine ca. 1685 kg - Manually movable portal - Movable cylinder manually (left - right) - Cylinder extension up to the table - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Joystick to move the piston up / down - Hand pump for precision work These straightening presses are equipped with a movable cylinder (on the side) and a Movable frame (longitudinal-running) equipped to allow easy access to all Isdpfxsi Db Ere Akpjih allow points of the surface. The design of this portal press makes it possible to put heavy material on the table with a crane and that Slide the portal over the material at the beginning of the pressing process. The quality of these hydraulic straightening presses is very high. Over and beyond is the hydraulic unit with a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing.

Condition: good (used), Schuler PE4s 50/800 high-speed press Manufacturer: Schuler Type: PE4s 50/800 61/21 600/3 Press force: 50 tons Stroke: 800 mm Strokes per minute: 125-300 Iiedpfxogryc Ne Akpjh Ram stroke: 40 mm Kohler unwinding reel 500.1 M More items – new and used – can be found in our shop! International shipping costs available upon request!

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Iisdpjhtaaqefx Akpsh Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: used, pressure 2 t throat 150 mm stroke 150 mm table surface area 310 x 250 mm power requirement 2,0 kW weight of the machine ca. 0,6 t Iiodpfx Akotzv Hmjpeh dimensions of the machine ca. 1,2 x 0,8 x 1,7 m Single column press - with table base - various press accessories

Condition: new, pressure 8,0 kN stroke 40 mm throat 90 mm Working height from to 50 - 200 mm Iisdpfx Ajfv Avkskpjh table surface area 120 x 160 mm weight of the machine ca. 22 Kg dimensions 160 x 230 x410 mm Knee lever hand press with fine height adjustment SPECIAL PRICE!!! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring

Condition: new, pressure 8,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 27 Kg Ijdpfxefv Awas Akpoih dimensions 160 x 230 mm

Year of construction: 1994, condition: good (used), machine/vehicle number: 24.105, A used, well-maintained hydraulic press brake HATASTAR, equipped with: - CYBELEC DNC 70 control system - Controlled axes Y1, Y2, X, R - Hydraulic upper tool clamping - Hydraulic crowning - FIESSLER AKAS safety system - Tools Iiodpfsfthzkox Akpjh - Press brake manual - Documentation Bending length 4600 mm Frame width 4100 mm Pressing force 1350 kN Stroke 220 mm Rapid traverse 140 mm/sec Working speed 10 mm/sec Return speed 100 mm/sec Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change.

Condition: new, New Transfer press line from min. 300t up to max. 3500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Iedpfx Asf Rt Ubekpeih

Condition: new, Year of construction: 2026, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Iiedexfwdepfx Akpoh Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, pressure 20 t stroke 180 mm daylight between the columns 540 x 100 mm Iodpoupxc Tsfx Akpjih dayligth max. 990 mm 72 mm diameter of piston 48 mm weight of the machine ca. 0,12 t dimensions of the machine ca. 0,8 x 0,7 x 1,8 m Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - 2 press documents

Condition: used, pressure 75 t stroke 250 mm daylight longitudinal/sideways 800 x 215 mm dayligth 170 - 885 mm working pressure 7,5 - 8.5 bar weight of the machine ca. 0,45 t dimensions 1,2 x 0,8 x 2,1 mm Hydraulic/pneumatic workshop press Cylinder can be moved sideways pneumatic foot pedal Winch for table height adjustment 2 pcs. pressing blocks CE marking Isdpfx Akjupxr Uopjih

Condition: used, Year of construction: 1986, Equipment: hot water, THROUGH FEED VENEER PRESS LINE, FOR DOOR PRODUCTION Maximum press measures : L 4200 x 1400 mm Heating : Hot water Iedew Ulv Ejpfx Akpsih Maximum pressure : 200 ton Glue station : MECMAN 800, spray glue, 8 pc. of spray guns, pump. Has been used for waterproof door production, polysteren on laminate/composite. Total length : Infeed rolls + press + outfeed rolls : 11000 + 5500 + 5000 = 21500 cm Can be examined in working condition

Condition: good (used), Year of construction: 2004, Well-maintained, used press brake from Ermaksan. Type: AP 2600 80 Iijdpfjz Aihmex Akpsh Capacity: 2600 x 80 tons NC control Includes a set of tooling.

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 7.376.230.761, functionality: fully functional, operating hours: 2,216 h, pressing force: 400 t, stroke length: 365 mm, throat depth: 630 mm, controller model: Durma DT-15, working width: 4,050 mm, TECHNICAL DETAILS Press force: 400 t Max. working width: 4,050 mm Frame spacing: 3,400 mm Overhang: 630 mm Max. stroke: 365 mm Crowning system: CNC-controlled Ram holder: Quick-release system Tool holder type: European style MACHINE DETAILS Iedpszzbafjfx Akpjih Drive system: CNC Control system: Durma DT-15 Number of axes: 4 (Y1 + Y2 + X + R) Dimensions & Weight Dimensions (L x W x H): 5,750 x 2,110 x 3,640 mm Weight: 27,760 kg Transport packages: 1 Operating hours: 2,216 h EQUIPMENT Tools Finger guard CE marking CE certificate Documentation Tools

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 183610114, functionality: fully functional, stroke length: 1,200 mm, empty load weight: 1,500 kg, working width: 3,000 mm, working height: 1,710 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press drive: Hydraulic Max. clamping width: 3,000 mm Max. clamping height: 1,710 mm Max. clamping depth: 100 mm Number of cylinders: 4 pcs Cylinder stroke: 1,200 mm Horizontal and vertical cylinders: Separately controlled MACHINE DETAILS Voltage: 400 V Current consumption: 3.5 A Isdpfx Ajzzbb Nskpoih Fuse rating: 16 A Main motor power: 1.5 kW Connected power: 1.5 kW Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,200 x 2,880 mm Unladen weight: 1,500 kg Number of transport packages: 1 pc EQUIPMENT Remote control

Condition: used, Universal temperature control unit REGLOPLAS Type 90M/10/SG75/D K/RT50 Pressurized water temperature control unit with electric heating and connections for external cooling Circulating process temperature control for industrial applications in plastics processing, especially for the temperature control of injection molds and other process tools. Manufacturer's serial number: 102010170001, Year of manufacture: 2009 Temperature: max. 90°C (for water) Isdpfx Aksz Au Hbopjih Heat transfer medium: Water Temperature range: +20°C to 90°C Operating overpressure: max. 6 bar Pump capacity: 100 l/min Tank volume: 2.8 liters (internal filling volume) Heating capacity: 10 kW Cooling capacity of heat exchanger: up to 160 kW (depending on the external cooling unit) Pump motor power: 1.5 kW Continuous sound pressure level

Condition: good (used), Year of construction: 1992, functionality: fully functional, Press force: 135 t Bending length: 3050 mm Isdpfx Aoz I N Hwskpeih Distance between uprights: 2550 mm Control system: LVD MNC 95 Total power consumption: 14 kW Machine weight (approx.): 7,700 kg

Condition: used, Year of construction: 1998, machine/vehicle number: H981224, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 170 t, stroke length: 180 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, table width: 180 mm, table length: 4,230 mm, table height: 960 mm, throat depth: 410 mm, clearance between the columns: 3,760 mm, oil tank capacity: 150 l, total length: 4,500 mm, total width: 2,200 mm, total height: 2,900 mm, overall weight: 13 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine is still operational and can be inspected at the factory in Northern Germany. Working length: 4100 mm Distance between uprights: 3650 mm Pressing force: 170 tons Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable rear stop Overhang: 300 mm Stroke: 200 mm Crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Iiodpfx Asz Imcpskpoh Accessories: 1 set of tools

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 16232, overall weight: 19,400 kg, type of input current: three-phase, input voltage: 400 V, empty load weight: 4,400 kg, input frequency: 50 Hz, input current: 32 A, operating pressure: 200 bar, oil tank capacity: 60 l, Equipment: documentation/manual, Avermann MPC 16 P/E – 16 m³ | Discharge hatch | Fully rubber-lined For sale: Avermann MPC 16 P/E compaction container, built in 2010, with a capacity of 16 m³. This robustly built Avermann compaction container is specifically designed for applications involving the processing of moist or wet waste streams. The machine is equipped with a discharge hatch and is fully rubber-lined on both the front and rear sides. This makes this compaction container particularly suitable for situations where good sealing is important and where, for example, wet waste, industrial waste, or other moist waste streams are processed. The container is equipped with a hook lift system on the front, making it suitable for transport with a hook arm system. Technical data: Brand: Avermann Type: AVOS MPC 16 P/E Year of construction: 2010 Serial number: 16232 Capacity: 16 m³ Power supply: 400 V / 50 Hz Power: 5.5 kW Fuse rating: 25 A Protection class: IP54 Maximum working pressure: 200 bar Own weight: approx. 4,400 kg Iisdjz Eqzqjpfx Akpsh Permissible total weight: 15,000 kg Hook lift system on the front Equipped with a discharge hatch Front and rear sides fully rubber-lined Robust industrial construction Special features: Due to the combination of the discharge hatch and the rubber lining, this machine is very suitable for processing wet and moist waste streams. The large feed opening makes it easy to quickly feed larger quantities of waste. The compaction container is in used condition and has signs of wear consistent with its age and use. Technically, it is a heavy-duty and robustly built Avermann compaction container for professional use. Suitable for, among others, industry, food companies, manufacturing companies, catering, recycling and waste processing. Inspection and testing are possible by appointment. Please feel free to contact us for more information, price or technical questions. Keywords: Avermann, AVOS, MPC16, MPC 16 P/E, compaction container, 16m3, waste compactor, container compactor, wet waste, discharge hatch, rubber sealing, rubber-lined, hook lift, waste compaction, recycling, compactor.

Condition: ready for operation (used), Year of construction: 1984, stroke length: 60 mm, controller manufacturer: SIEMENS, Mechanical stamping press manufactured in 1984. This KAISER V50W High-Speed Press underwent a complete mechanical and electrical overhaul in 2022, featuring a new Siemens control system and a SEW 59 kW main motor. It offers a pressing force of 500 kN and a stamping speed of up to 400 strokes/min. If you are looking to get high-quality stamping capabilities, consider the KAISER V50W High-Speed Press we have for sale. Contact us for further details. Iijdpfx Aoz E Ikiekpeh • Retrofit/overhaul: Complete mechanical and electrical overhaul in 2022 (approx. €50,000) • Stroke: 8–60 mm • Ram adjustment: 80 mm • Stamping speed: up to 400 strokes/min • Table size: 800 × 550 mm • Main motor: SEW 59 kW (installed 2022) • Control system: Siemens (new electrical system and cabinet in 2022) • Operator panel: Siemens SIMATIC HMI • Press force monitoring: UNIDOR • Condition: Very good, ready for operation Technical Specification Stamping Force 500 Kn

Condition: used, Year of construction: 2011, functionality: unexamined, machine/vehicle number: E17423-1, Avermann SSP-80 SIMPLEX stationary screw press | 11 kW | Year of construction 2011 For sale: Avermann SSP-80 SIMPLEX stationary screw press, year of construction 2011. This robust stationary screw press from Avermann is designed for the efficient compaction and transportation of various waste and material streams. The powerful screw continuously transports and compacts the material towards the connected container. The machine is heavy-duty and well-built, making it very suitable for professional use in industries such as manufacturing, logistics, recycling, and waste processing. Technical specifications: Brand: Avermann Type: SSP-80 SIMPLEX Year of construction: 2011 Serial number: E16732-1 Power supply: 400 V / 50 Hz Power: 11.0 kW Connected load: 63 A Stationary design Powerful screw drive Large feed opening Robust industrial construction Details: The machine is in good used condition. The screw and feed side are easily accessible, and the machine is equipped with an integrated electric drive and control system. A screw press has the advantage that the material is continuously fed and compacted. This makes the machine very interesting for companies with larger or constant waste streams that want to significantly reduce the volume. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, SSP-80, SSP 80, SIMPLEX, screw press, stationary screw press, waste compactor, waste compaction, compactor, recycling, press installation, screw compactor, Schneckenverdichter. Isdpfsz Enz Iox Akpoih

Condition: used, Year of construction: 2011, functionality: unexamined, machine/vehicle number: E17427-1, Avermann SSP-80 SIMPLEX stationary screw press | 11 kW | Year of construction 2011 For sale: Avermann SSP-80 SIMPLEX stationary screw press, year of construction 2011. This robust stationary screw press from Avermann is designed for the efficient compaction and transport of various waste and material streams. The powerful screw continuously transports and compacts the material towards the connected container. The machine is heavily built and very suitable for professional use in various industries, including manufacturing, logistics, recycling, and waste processing. Technical specifications: Brand: Avermann Type: SSP-80 SIMPLEX Year of construction: 2011 Serial number: E17427-1 Power supply: 400 V / 50 Hz Power: 11.0 kW Connected load: 63 A Stationary design Powerful screw drive Large feed opening Robust industrial construction Special features: The machine is in good used condition. The screw and feed side are easily accessible, and the machine is equipped with an integrated electric drive and control system. A screw press has the advantage that the material is continuously fed and compacted. This makes the machine very interesting for companies with larger or constant waste streams that want to significantly reduce the volume. Inspection and testing are possible by appointment. Ijdpfjz En A Sjx Akpeih Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, SSP-80, SSP 80, SIMPLEX, screw press, stationary screw press, waste compactor, waste compaction, compactor, recycling, pressing system, screw compactor, Schneckenverdichter.

Condition: new, Year of construction: 2026, machine/vehicle number: P784, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, pressing force: 230 t, stroke length: 315 mm, operating speed: 180 mm/s, reverse speed: 150 mm/s, table length: 3,100 mm, throat depth: 305 mm, distance table to ram: 500 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, overall weight: 20,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, The all-rounder with extra power! The High Quality Press Brake, or HQPB for short, is the top model in the Placke range of press brakes. The entire manufacturing process, from the hydraulic cylinder to the construction of the control cabinet, takes place in-house. By using state-of-the-art technology, combined with many years of experience in the field of forming technology, the HQPB series enables you to perform bending operations at the highest level. Even the standard basic model is a fully functional press brake. This combination of safety, reliability, and efficiency, coupled with user-friendly operation, allows us to meet the highest requirements and achieve maximum precision in the bending process. Press force: 2,300 kN (230 t) Working length: 3,100 mm Clearance between uprights: 2,600 mm Installation height: 450 mm Overhang: 305 mm Ram stroke: 265 mm Height of lower bed above floor: 850 mm Rapid traverse max.: 200 mm/s Pressing speed max.: 9.8 mm/s Retraction speed max.: 150 mm/s Positioning accuracy of ram: ± 0.01 mm Ram inclination: ± 10 mm (electrically limited to ± 5 mm) Motor power: 18.5 kW Hydraulic oil tank capacity: 290 l Operating voltage: 400 V / 3 Ph / 50 Hz Machine weight: approx. 17.5 t Description: > Machine body Steel S 355 N, design based on FEM analysis Side stands with two pressure cylinders, above-floor 2-component structural paint, RAL 7004 / 7016 > Hydraulics & Upper beam Proportional control valve, electronically monitored cylinder synchronization Iijdpfxjz Hnzkj Akpoh Double upper beam guide, Heidenhain scales Separate Y1/Y2 control, inclination monitoring > Tooling Top: WILA hydraulic, NSCL-II-HC Bottom: narrow table, single V (13 × 20) 2 aluminum support arms at the front, approx. 600 mm, height-adjustable > Crowning Centrally adjustable, hydraulically-dynamically, CNC-controlled Active control loop keeps the lower bed in the zero position Constant bending angle > Back gauge 4 axes X-axis 1,100 mm, 400 mm/s, ± 0.01 mm R-axis 200 mm, 200 mm/s, ± 0.01 mm Z1 + Z2 CNC, 850 mm/s, ± 0.02 mm, finger distance min. 50 mm > Control Delem DA 66S 24″ touchscreen on the swivel arm 2D programming, 3D visualization DXF import, tandem operation > Safety & Efficiency CE compliant, Pilz safety PLC TFS laser light curtain, rear light curtain eco-MODE start-stop automatic > Additional equipment Air conditioning in the control cabinet LED work area lighting at the rear Remote diagnostics for Delem control and Pilz PLC

Condition: reconditioned (used), Year of construction: 2015, Presto HAN10R Year of manufacture: 2015 2 units immediately available Skip loader container 10 cubic meters usable volume Top-hinged discharge door Two-part lid, opening to the left/right above the filling opening Prepared for ramp operation Iodpfx Akjz E U Twepsih Technically refurbished, inspected, and serviced Painted in RAL6018 We will gladly prepare an offer including delivery.

Condition: good (used), functionality: fully functional, Valmet Sunds pulp dewatering press / bleaching press * Roll diameter: 900 mm * Roll length: 2820 mm * Roll speed: 2 - 15 revolutions/min Iedpfxsz Hc A Ae Akpjih * Roll gap: 3 - 13 mm