Used Elektromotor 22 Kw for sale (58,601)

Condition: used, mileage: 52,791 km, power: 184 kW (250.17 HP), first registration: 01/1964, overall weight: 25,000 kg, fuel type: diesel, color: red, axle configuration: 6x6, maximum load weight: 1,530 kg, empty load weight: 23,470 kg, tire size: 11.00R20, wheelbase: 3,775 mm, driver cabin: other, gearing type: mechanical, suspension: steel, Year of construction: 1964, total length: 2,500 mm, total width: 3,300 mm, Equipment: all wheel drive, cable winch, Vehicle location: Bovenden, double bench seat, rear window, switch 6, rotating beacon, cable winch Wheelbase: 3775 mm Body: Crane truck type F Uranus 7, crane load: 16000 kg, 360° turning circle The Magirus-Deutz Uranus was a truck model from the German commercial vehicle manufacturer Magirus-Deutz in Ulm. With 250 hp from an air-cooled V12 engine from Klöckner-Humboldt-Deutz, the Uranus was the most powerful truck produced in Germany at the time. The heavy, three-axle vehicle came onto the market in 1954 as the A12000 Uranus and was used as a chassis for fire department and military crane trucks as well as for heavy tractor units. There were also variants as a tractor unit and dump truck, primarily for export. This vehicle is a beautiful collector's item whose interior is in excellent original condition, which is of course also due to the low mileage. The vehicle comes with the original spare parts list as well as the original description and operating instructions. The vehicle was restored for approx. 150,000 EUR! Length 8200 mm, width 2500 mm, height 3300 mm, complete literature/history available. The vehicle comes from the Ulm fire department. 10 x 9 Michelin tires, DREAM condition ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bjdpfx Adevhg R Hjxeww - .

Condition: used, Year of construction: 2011, 2. general description High-pressure vacuum cleaner type HS is used to separate dust for smaller tasks. High-pressure vacuum cleaner type HS must not be used in connection with ATEX zones. Standard finish: powder coating for internal installation 3rd function Bwodpfx Aehur Hijdxew Process air is fed in through the dust drawer in the left side and out through the side channel blower. side channel blower. 3.1 Daily maintenance Filter cartridge must be cleaned by 5 - 10 rotations with Roto cleaning after operation or when falling suction capacity (see system watch) incl. Dinse suction burner MRZ 350-4 SAZ

Condition: excellent (used), Year of construction: 2009, operating hours: 61,000 h, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 45 mm, clearance between the columns: 560,510 mm, column diameter: 90 mm, injection pressure: 2,106 bar, injection weight: 325 g, mold height (min.): 200 mm, ejector force: 42 N, ejector stroke: 190 mm, overall weight: 9,000 kg, Press currently in production. Excellent for packaging. With inverter. Bwodpfxoww En Ie Adxew

Condition: new, Laser performance: 4Working Area: 1500 x 3000Loading Capacity: 1200x-travel: 1520y-travel: 3030precision of position: 0,05repeat accuracy: 0,03messurements (LxWxH): 10000 x 400 x 2120 FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Bwsdpfxjruwazj Adxow Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera SPECIFICATIONSVALUEWorking Area1500 x 3000 mmLoading Capacity1200 kgX-Y Axis Travel1520 x 3030 mmZ Axis Travel300 mmX-Y-Z Axis Guideway4 Point Ball CagedX-Y Axis Drive SystemRackZ Axis Drive SystemBallscrewX-Y Axis Speed100 m/minZ Axis Speed30 m/minX-Y Position Accuracy0,05 mmX-Y Repeatability Accuracy0,03 mmTable Change Time10 secLaser SourceRaycus / Han’s / JPTLaser Source Output Power2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC Control SystemFscutLaser Cutting HeadRaytools / BOCI / WSXAssist GassesAir/Oxygen/NitrogenCooling TypeWater CoolingMachine Weight12000 kgMachine Dimensions (WxLxH)4400 x 10000 x 2120 mmGraphic Formatdwg / dxf / stpVoltage380 / 50 HzCertificationsCE / ISOWarranty2 Years

Condition: ready for operation (used), DC Converter, Simoreg Siemens DC-Converter D485/30 Mre-GeE6S22, Used Machine Manufacturer: Siemens Simoreg Model: D485/30 Mre-GeE6S22 Overall Dimensions: Length: 270 mm Width: 230 mm Height: 385 mm Weight: 6 kg Electrical Specifications: 3-Phase Input: 3AC; 400V; 25A Output: DC 485V; 30A 2-Phase Input: 2AC; 400V; 5A Output: DC 325V; 5A Bjdpfeu U Ilgex Adxoww

Condition: used, Condenser Guntner -Type: GVH 082B/3N(D) -Cooling capacity: 227 kW -Number of fans: 3 x 820 mm -Dimensions: 5300 x 1200 x 19500 mm -Quantity in stock: 1 Bwodpfx Adsw Dqknsxjw -Stock number: SK 165 -Condition: Used in good condition

Condition: good (used), Year of construction: 2013, functionality: fully functional, cooling capacity: 503 kW (683.89 HP), type of cooling: air, overall weight: 5,174 kg, total width: 2,200 mm, total length: 6,400 mm, total height: 2,500 mm, warranty duration: 6 months, Aircooled chiller Uniflair BREC2202A 503 kW Cooling capacity: 503 kW / 143.03 tons (12/7 — 35°C) Year of manufacture: 2013 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 2 pcs. Fu Sheng BSR 324 HA (screw) Type of refrigerant: R134a Bwodpfx Ajwwk Hijdxew Number of fans: 8 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump Calpeda NM 80/16A/A Dimensions: 6.4x2.2x2.5 m Weight: 5174 kg Working hours: 14659/32700 h. Condition: Good

Condition: new, Laser performance: 12Loading Capacity: 1250x-travel: 2020y-travel: 4050z-travel: 350precision of position: 0,05repeat accuracy: 0,03Table change time: ca. 10coolant fittings: Wasserkühlerweight approx.: 11500messurements (LxWxH): 4400 x 10000 x 2120 FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   Bedporuwbqefx Adxeww - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera SPECIFICATIONSVALUEWorking Area2000 x 4000 mmLoading Capacity1200 kgX-Y Axis Travel2020 x 4050 mmZ Axis Travel350 mmX-Y-Z Axis Guideway4 Point Ball CagedX-Y Axis Drive SystemRackZ Axis Drive SystemBallscrewX-Y Axis Speed100 m/minZ Axis Speed30 m/minX-Y Position Accuracy0,05 mmX-Y Repeatability Accuracy0,03 mmTable Change Time10 secLaser SourceRaycus / Han’s / JPTLaser Source Output Power2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC Control SystemFscutLaser Cutting HeadRaytools / BOCI / WSXAssist GassesAir/Oxygen/NitrogenCooling TypeWater CoolingMachine Weight11500 kgMachine Dimensions (WxLxH)4400 x 10000 x 2120 mmGraphic Formatdwg / dxf / stpVoltage380 / 50 HzCertificationsCE / ISOWarranty2 Years

Condition: ready for operation (used), Fan, Centrifugal fan, Centrifugal fan 7,5 kW, Fan 7,5 kW Used machine Manufacturer: JHM Type: DST40-220-7,5/D Bjdpfou Nu Duex Adxoww Year of manufacture: 2005 Overall dimensions: 1550 x 1200 x 1350 mm Air delivery: 2400 m³/h Electrical data: 400 V ; 50 Hz ; 14,5 A ; 2880/min ; 7,5 kW

Condition: new, Year of construction: 2021, functionality: fully functional, cooling capacity: 700.2 kW (952.01 HP), type of cooling: air, overall weight: 7,460 kg, total width: 2,260 mm, total length: 7,900 mm, total height: 2,530 mm, warranty duration: 6 months, Aircooled chiller CLIMAVENETA I-FX(1+I) CA 2722 700.2 kW Cooling capacity: 700.2 kW / 199.1 tons (12/7 — 35°C) Year of manufacture: 2021 Options: Economizer Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 1 pcs. BITZER CSCVH26-200Y-40A (inverter, screw) + 1 pcs. BITZER CSC8593-140Y-40D (screw) Type of refrigerant: R134A Bsdpfewlnl Ejx Adxeww Number of fans: 20 pcs. ZIEHL-ABEGG FN080-ZIA.GG.V7P3 Dimensions: 7.9x2.26x2.53 m Weight: 7460 kg. Working hours: 0/0 h. Condition: Outlet. There are traces of hail (does not affect performance)

Condition: new, Laser performance: 2Loading Capacity: 1250x-travel: 2020y-travel: 4050z-travel: 350precision of position: 0,05repeat accuracy: 0,03Table change time: ca. 10coolant fittings: Wasserkühlerweight approx.: 11500messurements (LxWxH): 4400 x 10000 x 2120 FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Bodpfx Aderuwbxjxoww Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera SPECIFICATIONSVALUEWorking Area2000 x 4000 mmLoading Capacity1200 kgX-Y Axis Travel2020 x 4050 mmZ Axis Travel350 mmX-Y-Z Axis Guideway4 Point Ball CagedX-Y Axis Drive SystemRackZ Axis Drive SystemBallscrewX-Y Axis Speed100 m/minZ Axis Speed30 m/minX-Y Position Accuracy0,05 mmX-Y Repeatability Accuracy0,03 mmTable Change Time10 secLaser SourceRaycus / Han’s / JPTLaser Source Output Power2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC Control SystemFscutLaser Cutting HeadRaytools / BOCI / WSXAssist GassesAir/Oxygen/NitrogenCooling TypeWater CoolingMachine Weight11500 kgMachine Dimensions (WxLxH)4400 x 10000 x 2120 mmGraphic Formatdwg / dxf / stpVoltage380 / 50 HzCertificationsCE / ISOWarranty2 Years

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 221.1 kW (300.61 HP), type of cooling: water, overall weight: 2,000 kg, total width: 1,200 mm, total length: 3,000 mm, total height: 1,700 mm, warranty duration: 6 months, Watercooled chiller Climaveneta FX W 0951 221.1 kW Cooling capacity: 221.1 kW / 62.87 tons (12/7 — 35°C) Year of manufacture: 2018 Refrigerant circuit: 1 pcs. Heat exchanger: Shell and tube Compressors: 1 pcs. Bitzer CSH7593-110Y-40P (screw) Type of refrigerant: R134A Dimensions: 3x1.2x1.7 m. Weight: 2000 kg. Working hours: 33 h. Condition: Outlet Bwjdpfx Adev Ux Rlexjw

Condition: new, Laser performance: 6Loading Capacity: 1250precision of position: 0,05repeat accuracy: 0,03Table change time: ca. 15coolant fittings: Wasserkühlerweight approx.: 17500messurements (LxWxH): 4400 x 9500 x 2350 mmMaximum speed: 120pipe diameter: 220Working Area: 2000 x 6000 FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Bjdpfx Aetwtn Ijdxoww Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera SPECIFICATIONSVALUEWorking Area2000 x 4000 mmLoading Capacity1200 kgX-Y Axis Travel2020 x 4050 mmZ Axis Travel350 mmX-Y-Z Axis Guideway4 Point Ball CagedX-Y Axis Drive SystemRackZ Axis Drive SystemBallscrewX-Y Axis Speed100 m/minZ Axis Speed30 m/minX-Y Position Accuracy0,05 mmX-Y Repeatability Accuracy0,03 mmTable Change Time10 secLaser SourceRaycus / Han’s / JPTLaser Source Output Power2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC Control SystemFscutLaser Cutting HeadRaytools / BOCI / WSXAssist GassesAir/Oxygen/NitrogenCooling TypeWater CoolingMachine Weight11500 kgMachine Dimensions (WxLxH)4400 x 10000 x 2120 mmGraphic Formatdwg / dxf / stpVoltage380 / 50 HzCertificationsCE / ISOWarranty2 Years

Condition: new, Year of construction: 2016, functionality: fully functional, cooling capacity: 251 kW (341.26 HP), type of cooling: water, total width: 1,100 mm, total length: 1,600 mm, total height: 1,950 mm, warranty duration: 6 months, heating capacity: 282 kW (383.41 HP), Watercooled chiller/Heat pump Climaveneta NX WN 802 251 kW/282 kW Cooling capacity: 251 kW / 71.37 tons (12/7 — 35°C) Bsdjv S Dliopfx Adxoww Heating capacity: 282 kW / 80.19 tons (40/45 —7°C) Year of manufacture: 2016 Options: Heat pump Refrigerant circuit: 1 pcs. Heat exchanger: Plate Compressors: 2 pcs. Copeland ZP485KCE-TWD-522 (scroll) Type of refrigerant: R410a Dimensions: 1.6x1.1x1.95 m Working hours: 124/102 h. Condition: Outlet

Condition: new, Laser performance: 2Working Area: 1500 x 3000Loading Capacity: 1250x-travel: 1520y-travel: 3030precision of position: 0,05repeat accuracy: 0,03messurements (LxWxH): 13000 x 4400 x 2350weight approx.: 12500 FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Bedpjruwapefx Adxeww Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera SPECIFICATIONSVALUEWorking Area1500 x 3000 mmLoading Capacity1200 kgX-Y Axis Travel1520 x 3030 mmZ Axis Travel300 mmX-Y-Z Axis Guideway4 Point Ball CagedX-Y Axis Drive SystemRackZ Axis Drive SystemBallscrewX-Y Axis Speed100 m/minZ Axis Speed30 m/minX-Y Position Accuracy0,05 mmX-Y Repeatability Accuracy0,03 mmTable Change Time10 secLaser SourceRaycus / Han’s / JPTLaser Source Output Power2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC Control SystemFscutLaser Cutting HeadRaytools / BOCI / WSXAssist GassesAir/Oxygen/NitrogenCooling TypeWater CoolingMachine Weight12000 kgMachine Dimensions (WxLxH)4400 x 10000 x 2120 mmGraphic Formatdwg / dxf / stpVoltage380 / 50 HzCertificationsCE / ISOWarranty2 Years Max. Pipe dimension220 mmMax. Profile lenght6100 mm

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 13.8 kW (18.76 HP), type of cooling: air, overall weight: 193 kg, total width: 400 mm, total length: 1,400 mm, total height: 1,400 mm, warranty duration: 6 months, heating capacity: 16.2 kW (22.03 HP), AIRCOOLED chiller/heat pump Clivet WSAN-YMi 81 13.8/16.2 kW Cooling capacity: 13.8 kW (12/7 — 35°C) Bjdpfx Aevn Igisdxoww Heating capacity: 16.2 kW (40/45 —7°C) Year of manufacture: 2022 Version: 250 V, 1 Phase, 50 Hz Options: Heat pump, Hydralic module Hydraulic module: 1 pcs. water pump, expansion vessel Heat exchanger: Plate Refrigerant circuit: 1 pcs. Compressors: 1 pcs. Mitsubishi (Rotary Inverter DC) Type of refrigerant: R-32 Number of fans: 2 pcs. Dimensions: 1.4 x 0.4 x 1.4 m Weight: 193 kg Working hours: 0 h. Condition: excellent, new

Condition: new, Laser performance: 3Working Area: 1500 x 3000Loading Capacity: 1200x-travel: 1520y-travel: 3030precision of position: 0,05repeat accuracy: 0,03messurements (LxWxH): 10000 x 400 x 2120SPECIFICATIONSVALUEWorking Area1500 x 3000 mmLoading Capacity1200 kgX-Y Axis Travel1520 x 3030 mmZ Axis Travel300 mmX-Y-Z Axis Guideway4 Point Ball CagedX-Y Axis Drive SystemRackZ Axis Drive SystemBallscrewX-Y Axis Speed100 m/minZ Axis Speed30 m/minX-Y Position Accuracy0,05 mmX-Y Repeatability Accuracy0,03 mmTable Change Time10 secLaser SourceRaycus / Han’s / JPTLaser Source Output Power2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC Control SystemFscutLaser Cutting HeadRaytools / BOCI / WSXAssist GassesAir/Oxygen/NitrogenCooling TypeWater CoolingMachine Weight12000 kgMachine Dimensions (WxLxH)4400 x 10000 x 2120 mmGraphic Formatdwg / dxf / stpVoltage380 / 50 HzCertificationsCE / ISOWarranty2 Years Bwsdpfsruwawox Adxow

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 1.29 kW (1.75 HP), type of cooling: air, overall weight: 178 kg, total width: 440 mm, total length: 1,450 mm, total height: 1,570 mm, heating capacity: 14.1 kW (19.17 HP), AIRCOOLED CHILLER/HEAT PUMP CLIVET WSAN-YMI 71 12.9/14.1 KW Cooling capacity: 12.9 kW (12/7 — 35°C) Heating capacity: 14.1 kW (40/45 — 7°C) Year of manufacture: 2022 Options: Heat pump, Hydralic module Hydraulic module: 1 pc. water pump, expansion vessel Heat exchanger: Plate Refrigerant circuit: 1 pc. Compressors: 1 pc. Mitsubishi (Rotary Inverter DC) Type of refrigerant: R-32 Number of fans: 2 pcs. Version: 250 V, 1 Phase, 50 Hz Dimensions: 1,45x0,44x1,57 m Weight: 178 kg Working hours: 0 h. Product quantity: 47 pcs. Condition: excellent, new Bwsdjqrnfqepfx Adxsw

Condition: new, Laser performance: 12Working Area: 1500 x 3000Loading Capacity: 1200x-travel: 1520y-travel: 3030precision of position: 0,05repeat accuracy: 0,03messurements (LxWxH): 10000 x 400 x 2120 FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  Bsdpfxeruwa Te Adxoww - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera SPECIFICATIONSVALUEWorking Area1500 x 3000 mmLoading Capacity1200 kgX-Y Axis Travel1520 x 3030 mmZ Axis Travel300 mmX-Y-Z Axis Guideway4 Point Ball CagedX-Y Axis Drive SystemRackZ Axis Drive SystemBallscrewX-Y Axis Speed100 m/minZ Axis Speed30 m/minX-Y Position Accuracy0,05 mmX-Y Repeatability Accuracy0,03 mmTable Change Time10 secLaser SourceRaycus / Han’s / JPTLaser Source Output Power2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC Control SystemFscutLaser Cutting HeadRaytools / BOCI / WSXAssist GassesAir/Oxygen/NitrogenCooling TypeWater CoolingMachine Weight12000 kgMachine Dimensions (WxLxH)4400 x 10000 x 2120 mmGraphic Formatdwg / dxf / stpVoltage380 / 50 HzCertificationsCE / ISOWarranty2 Years

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 785 kW (1,067.30 HP), type of cooling: air, overall weight: 6,190 kg, total width: 2,330 mm, total length: 8,500 mm, total height: 2,640 mm, warranty duration: 6 months, AIRCOOLED CHILLER EMICON ERAH 8120 MC VS HE KE 785 KW Bsdpfx Ajukg R Usdxsww Cooling capacity: 785 kW / 223.2 tons (12/7 — 35°C) EER: 3.02 Refrigerant circuit: 2 pcs. Heat exchanger: Shell-and-tube Bitzer SQDS4010214-CE Condenser: Microchannel Type of refrigerant: R513А Compressors: 2 pcs. Bitzer CSVH25-160Y-40A (Inverter screw) Number of fans: 14 psc. Dimensions: 8,5 х 2,33 х 2,64 m. Weight: 6190 kg. Working hours: 0/0 h. Condition: Never used, new

Condition: new, Laser performance: 3Loading Capacity: 1250x-travel: 2020y-travel: 4050z-travel: 350precision of position: 0,05repeat accuracy: 0,03Table change time: ca. 10coolant fittings: Wasserkühlerweight approx.: 11500messurements (LxWxH): 4400 x 10000 x 2120 FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  Bwedpfx Adstuyf Hjxow - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera SPECIFICATIONSVALUEWorking Area2000 x 4000 mmLoading Capacity1200 kgX-Y Axis Travel2020 x 4050 mmZ Axis Travel350 mmX-Y-Z Axis Guideway4 Point Ball CagedX-Y Axis Drive SystemRackZ Axis Drive SystemBallscrewX-Y Axis Speed100 m/minZ Axis Speed30 m/minX-Y Position Accuracy0,05 mmX-Y Repeatability Accuracy0,03 mmTable Change Time10 secLaser SourceRaycus / Han’s / JPTLaser Source Output Power2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC Control SystemFscutLaser Cutting HeadRaytools / BOCI / WSXAssist GassesAir/Oxygen/NitrogenCooling TypeWater CoolingMachine Weight11500 kgMachine Dimensions (WxLxH)4400 x 10000 x 2120 mmGraphic Formatdwg / dxf / stpVoltage380 / 50 HzCertificationsCE / ISOWarranty2 Years

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: Bonfiglioli, gear motor -Speed: 22.5 rpm -Gearbox: Type VF30 N P56B14 i= 60 -Motor: Type BN 56 B4 0.09 kW -Design: B3 angle Bjdpjxal Udjfx Adxsww -Hollow shaft: Ø 14 x 55 mm -Protection class: IP 55 -Number: 3x gear motor available -Price: per piece -Dimensions: 260/145/H120 mm -Weight: 4.1 kg/piece

Condition: excellent (used), Year of construction: 2022, ICS Cool Energy Type: IC 305 Year of manufacture: 2022 ICS Cool Energy i-Chiller IC 305 – Industrial Water Chiller 8 kW For sale is a compact industrial water chiller (process chiller) of the type i-Chiller IC 305 by ICS Cool Energy. This unit is ideally suited for cooling machinery, processes, or laboratory applications. Features / Equipment: - Integrated hydraulic system (including pump, expansion tank, etc.) - Robust “coil-in-tank” evaporator system for high operational reliability - Compact, space-saving design - Plug-and-play installation – immediately ready for use - Suitable for a wide range of applications: plastics processing, food industry, breweries, recycling, laboratories, and more. Technical details - Cooling capacity: 8 kW (nominal output) - Power consumption: 3.64 kW - Energy efficiency (EER): 2.85 - Power supply: 400 V ± 10 %, 3-phase + PE, 50 Hz - Max. ambient temperature: 46 °C - Compressor(s): 1 unit - Refrigerant: R410A - Tank volume: 115 l - Dimensions (L×W×H): 660 × 1315 × 1420 mm - Noise level: 81 dB(A) sound power, 53 dB(A) sound pressure - Weight (operating weight): approx. 220 kg Condition: used Scope of delivery: (see picture) Bodow S Txiepfx Adxeww (Specifications and technical data subject to change or error!) For any further questions, please contact us by phone.

Condition: used, Year of construction: 2023, operating hours: 448 h, machine/vehicle number: H2300010, power: 4 kW (5.44 HP), pressure (min.): 10 bar, used piston compressor available immediately: Bedpfx Adsxc H R Eoxjww ALMIG HLA-15-10 (10 bar) The compressor has 43 operating hour and is available immediately. 3 cylinders Pressure: 10 bar Rated power: 11.0 kW Delivery quantity at 7 bar: 1220 l / min Compressed air outlet: 3/4 " Dimensions length x width x height: 1450 x 710 x 830 mm Visit our store. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: excellent (used), Year of construction: 2022, ICS Cool Energy Type: IC 305 Year of manufacture: 2022 ICS Cool Energy i-Chiller IC 305 – Industrial Water Chiller 8 kW For sale is a compact industrial water chiller (process chiller) of the type i-Chiller IC 305 by ICS Cool Energy. This unit is ideally suited for cooling machinery, processes, or laboratory applications. Features / Equipment: - Integrated hydraulic system (including pump, expansion tank, etc.) - Robust “coil-in-tank” evaporator system for high operational reliability - Compact, space-saving design - Plug-and-play installation – immediately ready for use - Suitable for a wide range of applications: plastics processing, food industry, breweries, recycling, laboratories, and more. Technical details - Cooling capacity: 8 kW (nominal output) - Power consumption: 3.64 kW - Energy efficiency (EER): 2.85 - Power supply: 400 V ± 10 %, 3-phase + PE, 50 Hz - Max. ambient temperature: 46 °C - Compressor(s): 1 unit - Refrigerant: R410A Bodow S Tuwepfx Adxjww - Tank volume: 115 l - Dimensions (L×W×H): 660 × 1315 × 1420 mm - Noise level: 81 dB(A) sound power, 53 dB(A) sound pressure - Weight (operating weight): approx. 220 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change or error!) For any further questions, please contact us by phone.