Used Elektromotor 22 Kw for sale (38,083)

Year of construction: 1989, condition: excellent (used), CREEMERS 22 KW SCREW COMPRESSOR 22 KW ENGINE PERFORMANCE 3.0 m3/min, PRESSURE: 10 BAR, MILEAGE OF 12600 MTG THE MACHINE IS FULLY OPERATIONAL, Hjdpfx Aasf Nd D Rsgenl NET PRICE 6300,- GROSS PRICE 7749,- I HAVE MORE SCREW COMPRESSORS AND OF WELDING EQUIPMENT.

Condition: used, functionality: fully functional, Motor: 22 kW Hnodpfxeri R Duj Aagjl Fan diameter: 700 mm Length: 2500 mm

Condition: new, For sale: brand new KSB Etanorm SYT 50-32-250 centrifugal pump, supplied complete with 11 kW motor, mounted on a robust steel frame. The unit is factory new, year of manufacture 2023, from the renowned German manufacturer KSB – Made in Germany. The pump comes from surplus stock and has never been installed or used. KSB Etanorm series pumps are among the most widely used industrial pumps for applications such as: Hnsdeyt Ikpopfx Aagol • Industrial systems • Process engineering • District heating • Industrial water installations • Cooling systems • HVAC installations Robust construction and high-quality workmanship. Technical Data • Manufacturer: KSB • Model: Etanorm SYT 50-32-250 • Type: ETNY050-032-250 SG DB08LD20110 • Year of manufacture: 2023 • Flow rate: Q 11 m³/h • Head: H 74 m • Impeller diameter: Ø 229 mm • Rotational speed: 2977 rpm Motor • Power: 11 kW • Power supply: 380 / 400 / 415 V • Speed: approx. 2950 rpm • Protection class: IP55 • Insulation class: F The pump is mounted on a robust steel transport base.

Year of construction: 2009, condition: refurbished (used), functionality: fully functional, 1 piece liquid ring vacuum pump. Please read the description carefully until the end!! The pump is not suitable for: Water, food industry, or non-corrosive media. For these media, more cost-effective materials such as 1.4408 or 1.4571 are more appropriate. Attention!! The pump does not have explosion protection certificates. It is also not possible to replace the motor, as it is a special long-shaft motor. The mechanical seal is also not EX-certified! The pump is made from the special alloy Alloy 59!! This alloy is used when conventional chromium-nickel steels are no longer sufficiently corrosion-resistant. It is especially used where chloride-induced pitting and crevice corrosion or stress corrosion cracking could be an issue. Alloy 59 is used for: environmental technology, chemical industry (chemical processes involving oxidizing and reducing acids, resistance to moist chlorine gas), and waste incineration plants. Grade 2.4605 is predominantly used in the chemical industry, the pulp and paper industry, and in flue gas desulphurization plants. Excellent resistance to mineral acids such as nitric, phosphoric, sulfuric, and hydrochloric acid, especially to mixed sulfuric/hydrochloric acid environments. Typical applications include: - Plant components for organic chemical processes with chloride-containing media, especially when catalysts based on chlorides are used - Multipurpose installations in the chemical industry - Plant parts in the fine chemical and pharmaceutical industries - Scrubbers, heat exchangers, dampers, fans, and agitators for flue gas desulphurization units (FGD) in fossil-fuel power plants and waste incineration plants Hnjdpfxjigquts Aagsl - SO2 scrubbers for marine diesel engines - Components for seawater and concentrated brine applications - Equipment and components for geothermal and sour gas applications - Reactors for acetic acid and acetic anhydride - Reactors for hydrofluoric acid - Sulphuric acid coolers - Piping in geothermal power plants - Components in flue gas desulphurization units Manufacturer: Busch Type: LC 0220 A ZZO XX ZZ Volume flow: 195 m³/h Motor power: 7.5 kW Voltage: 400/690 Volt Speed: 1440 rpm Vacuum: 33 mbar Material: 2.4605 (Alloy 59) NiCr23Mo16Al All ball bearings new, mechanical seal reconditioned by specialist company. Weight: 121 kg Dimensions: Length 960 mm, Width 370 mm, Height 370 mm Connection: DN 50 (2")

Condition: not inspected (used), Manufacturer: Stork Capacity: 660 m3/h Hnjdpfjm Uc R Usx Aagol Engine: 160 kW

Condition: used, Year of construction: 2003, functionality: fully functional, power: 30 kW (40.79 HP), Manufacturer: KAESER Model: ASD 57 Motor: 30 kW Capacity: 4.5 m³/h Year of manufacture: 2003 Hsdjwtz E Uopfx Aagenl Operating hours: 29,900 h

Year of construction: 2025, condition: used, New: Yes Empty weight: 690 kg Dimensions of cargo space: 194 x 145 x 144 cm CE mark: yes Please contact Team DPX for more information Hjdpfx Aoxuzucoagsnl

Condition: used, functionality: fully functional, power: 22.9 kW (31.14 HP), fuel type: diesel, color: orange, operation weight: 2,190 kg, Year of construction: 2017, operating hours: 1,800 h, Hamm HD10VT combi roller 1,800 h Year of manufacture: 2017 2,190 kg - 3,110 kg 22.9 kW Kubota engine Hjdpfx Aaey Rx Riegonl Edge cutter wheel

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 18,000 kg, rotor diameter: 650 mm, number of blades: 115, total length: 3,920 mm, total height: 2,720 mm, total width: 4,500 mm, rotor length: 1,790 mm, type of input current: three-phase, rotational speed (max.): 80 rpm, sieve perforation: 40 mm, warranty duration: 12 months, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. Feeder dimensions : 2380 x 2580 mm Drive motor power : 2x90 kW Knives on rotor : 109 + 6 Fixed knives : 4 + 4 Weight : 18000 kg Behemoth single-shaft crushers are designed to shred various types of unprocessed waste to gain a large or medium fraction. These shredders are ideal for particularly tough and bulky products. Many years of experience in the recycling industry and the technical solutions used ensure that the highest operating efficiency is achieved. The efficient and wear-resistant system is prepared to work in harsh recycling conditions. P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Unused machine available on hand, possible tests before purchase. Hnedpforbiflex Aagel (dozens of machines in stock) If you are interested in GENOX machines from countries such as the UK, Germany, Portugal, Hungary, Spain, Russia, France and Turkey, please contact the Genox dealer directly in these countries. If you are from another country, please contact us and we will help you choose a machine and conduct tests in Poland.

Condition: used, mileage: 2,996 km, power: 90 kW (122.37 HP), fuel type: electric, gearing type: automatic, overall weight: 2,390 kg, first registration: 09/2024, emission class: euro6, color: silver, suspension: steel, number of seats: 5, fuel: electricity, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, traction control, trailer coupling, LG7 LED High-Performance Headlights, E07 Hill Start Assist, E2Z MBUX Multimedia System incl. Navigation & DAB, Q10 Crossmember for trailer hitch, FR8 Reversing Camera, E1K Navigation Package, EX8 Navigation Plus, EY5 Mercedes-Benz Emergency Call System, SD1 i-Size Child Seat Mounting, EY6 Breakdown Management, B25 Electric Parking Brake, EI0 Wireless Charging System for Mobile Devices, T68 Child Safety Locks for Doors and Windows in Passenger Compartment, Z1M M1 Registration, IA0 Wheel Formula 4x2, EZ5 Park Package, XO7 Mercedes-Benz Mobilo with DSB and GgD, T78 Sliding Door Track Cover in Body Color, Y10 First Aid Kit, VL2 Velour Floor Mats, SF6 Height-Adjustable Driver’s Seat with Lumbar Support, RD9 Tyres Without Specified Brand, H00 Warm Air Vent to Passenger Compartment, NM5 MB-NA 60 2b with Flange, Lowered, M-Speed, C6L Multifunction Steering Wheel, H22 Heated Rear Window, JW8 ATTENTION ASSIST, EM7 2 USB Ports in Rear Center Console, Z5L POWER STANDARD, Y44 Warning Triangle, GA2 Automatic Transmission for Electric Drive, P2F Active Safety Package, FP3 Mirror Package, FP4 Chrome Interior Package, XC8 VIN Visible from Outside, SZ6 Table and Illuminated Trim on Backrest, JH3 Communication Module (LTE) for Digital Services, X30 Registration Certificate Part II, FQ3 Glove Compartment, Passenger Side, Closed, I5T Plastic Underride Protection, RY2 Tyre Pressure Monitoring on Front Axle. We are happy to provide you with a customized financing or leasing offer and will accept your used vehicle as a trade-in. We look forward to welcoming you to our dealership for further consultation. Vehicle condition according to age/mileage, partial repainting may have been carried out as part of reconditioning. No liability for printing and typographical errors. Subject to change and prior sale. Click features may include digital extras, which can be fully or subscription-based via MercedesMe, possibly subject to a charge depending on duration. ... more on our homepage Hsdpfjydu N Hsx Aagjnl

Condition: used, mileage: 52,791 km, power: 184 kW (250.17 HP), first registration: 01/1964, fuel type: diesel, empty load weight: 23,470 kg, maximum load weight: 1,530 kg, overall weight: 25,000 kg, tire size: 11.00R20, axle configuration: 6x6, wheelbase: 3,775 mm, color: red, driver cabin: other, gearing type: mechanical, suspension: steel, total length: 2,500 mm, total width: 3,300 mm, Year of construction: 1964, Equipment: all wheel drive, cable winch, Vehicle location: Bovenden, double bench seat, rear window, 6-speed manual transmission, rotating beacon, winch. Hedpfxsvhg R Ho Aagjnl Wheelbase: 3,775 mm. Body: crane truck type F Uranus 7, crane capacity: 16,000 kg, 360° rotation. The Magirus-Deutz Uranus was a truck model manufactured by the German commercial vehicle producer Magirus-Deutz in Ulm. With 250 HP from an air-cooled V12 engine made by Klöckner-Humboldt-Deutz, the Uranus was the most powerful truck produced in Germany at the time. This heavy, three-axle vehicle was introduced in 1954 as the A12000 Uranus and served as a chassis for fire brigade and military crane trucks as well as heavy-duty tractors. Other versions included articulated tractors and dump trucks, mainly for export. This particular vehicle is a beautifully preserved collector’s item with an interior that is in outstanding original condition, which can of course be attributed to its very low mileage. Included with the vehicle are the original spare parts list, original description, and operating manual. The vehicle underwent restoration at a cost of approximately €150,000! Purchase price before restoration: €80,000! Length: 8,200 mm, width: 2,500 mm, height: 3,300 mm. Complete documentation/history available. The vehicle comes from the Ulm Fire Department. Fitted with 10 new Michelin tires, DREAM CONDITION! ACCESSORY INFORMATION WITHOUT GUARANTEE. Specifications subject to change, prior sale and errors excepted.

Condition: used, mileage: 52,791 km, power: 184 kW (250.17 HP), first registration: 11/1964, fuel type: diesel, empty load weight: 23,470 kg, maximum load weight: 1,530 kg, overall weight: 25,000 kg, tire size: 11.00R20, axle configuration: 6x6, wheelbase: 3,775 mm, color: red, driver cabin: day cab, gearing type: mechanical, suspension: steel, number of seats: 3, total length: 2,500 mm, total width: 3,300 mm, Year of construction: 1964, Equipment: all wheel drive, cabin, cable winch, Vehicle location: Bovenden. Double passenger bench, rear window, 6-speed manual gearbox, rotating beacon, winch. Wheelbase: 3775 mm. Body: Crane truck type F Uranus 7, crane capacity: 16,000 kg, 360° slewing range, 6x6 drive. The Magirus-Deutz Uranus was a truck model produced by the German commercial vehicle manufacturer Magirus-Deutz in Ulm. With 250 hp from an air-cooled V12 engine by Klöckner-Humboldt-Deutz, the Uranus was the most powerful truck produced in Germany at its time. This heavy, three-axle vehicle was introduced to the market in 1954 as the A12000 Uranus and served as a chassis for fire brigade and military crane trucks as well as heavy-duty tractors. Additional variants existed as tractor units and dump trucks, primarily for export. Hnsdpfx Aaovhg Ifsgol This particular vehicle is a collector’s piece in superb condition, with an interior that has been excellently preserved in original state, reflecting the vehicle’s very low mileage. Included with the vehicle are the original spare parts catalogue, operating instructions, and user manual. The vehicle has undergone a restoration costing approximately EUR 150,000! Acquisition cost prior to restoration was EUR 80,000! Dimensions: length 8,200 mm, width 2,500 mm, height 3,300 mm. Complete set of documents/history available. The vehicle originates from the Ulm fire department. Fitted with 10 new Michelin tires. DREAM condition! The above accessory information is provided without guarantee. Subject to change, prior sale, and errors.

Condition: used, mileage: 50 km, power: 135 kW (183.55 HP), first registration: 11/2024, fuel type: electric, axle configuration: 1 axle, fuel: electricity, brakes: other, color: white, driver cabin: other, gearing type: other, suspension: other, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, second-hand vehicle warranty, sliding door, ... Subject to alterations, prior sale and errors excepted Hnedpfsyk Rl Rex Aagel

Condition: used, mileage: 3,264 km, power: 135 kW (183.55 HP), first registration: 04/2024, fuel type: electric, axle configuration: 1 axle, next inspection (TÜV): 04/2026, fuel: electricity, brakes: other, color: white, driver cabin: other, gearing type: other, suspension: other, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, sliding door, truck registration, ... Subject to alterations, prior sale and errors excepted Hnodpsyk Rl Djfx Aagel

Condition: used, Grinding machine, angle grinder, lathe steel grinder, thread drill grinder, milling grinder, surface grinder, drill grinder, bench grinder Hjdpsfnxw Uefx Aagjnl -Manufacturer: Strohm -Handover: as is as seen -Protective window: damaged on one side -Binding bench: missing -Motor: AEG 0.22/0.3 kW -Speed: 680/1400 rpm -Coolant device: switchable, adjustable -Dimensions: 590/490/H1370 mm -Weight: 222 kg

Condition: used, Year of construction: 2007, cooling capacity: 2,200 kW (2,991.16 HP), type of input current: three-phase, type of cooling: water, overall weight: 10,420 kg, input voltage: 400 V, total width: 1,900 mm, total length: 4,400 mm, total height: 2,800 mm, Watercooled chiller YORK YK CF CG Q7 5CK F 2200 kW Cooling capacity: 2200 kW / 625.6 tons (12/7 — 35°C) Year of manufacture: 2007 Refrigerant circuit: 1 pcs. Heat exchanger: Shell and tube Compressors: 1 pcs. York YDHF52DD (centrifugal, inverter) Hnedpey Edvyjfx Aagjl Type of refrigerant: R134a Dimensions: 4.4x1.9x2.8 m. Weight: 10420 kg. Working hours: 70488 h. Condition: Good

Condition: used, Year of construction: 2013, cooling capacity: 503 kW (683.89 HP), type of input current: three-phase, type of cooling: air, overall weight: 5,174 kg, input voltage: 400 V, total width: 2,200 mm, total length: 6,400 mm, total height: 2,500 mm, Aircooled chiller Uniflair BREC2202A 503 kW Cooling capacity: 503 kW / 143.03 tons (12/7 — 35°C) Year of manufacture: 2013 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 2 pcs. Fu Sheng BSR 324 (screw) Hnodjy Edf Uspfx Aagel Type of refrigerant: R134a Number of fans: 8 pcs. Hydraulic module: 2 pcs. water pump Calpeda NM 80/16A/C Dimensions: 6.4x2.2x2.5 m. Weight: 5174 kg. Good conditions. One compressor need to be serviced

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 221.1 kW (300.61 HP), type of input current: three-phase, type of cooling: water, overall weight: 2,000 kg, input voltage: 400 V, total width: 1,200 mm, total length: 3,000 mm, total height: 1,700 mm, warranty duration: 6 months, Watercooled chiller Climaveneta FX W 0951 221.1 kW Cooling capacity: 221.1 kW / 62.87 tons (12/7 — 35°C) Year of manufacture: 2018 Refrigerant circuit: 1 pcs. Heat exchanger: Shell and tube Compressors: 1 pcs. Bitzer CSH7593-110Y-40P (screw) Type of refrigerant: R134A Dimensions: 3x1.2x1.7 m. Weight: 2000 kg. Working hours: 33 h. Condition: Outlet CONDITION, TESTING & READINESS Hnedpfx Aajv Ux Rlegjl The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: PNG2 2501HEX-special - 2200xxxxxx, cooling capacity: 270 kW (367.10 HP), type of input current: three-phase, type of cooling: water, overall weight: 3,767 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -10 °C, input voltage: 400 V, pressure: 10 bar, temperature: 7 °C, volume flow: 46.3 m³/h, total width: 2,190 mm, total length: 3,465 mm, total height: 2,425 mm, warranty duration: 12 months, input frequency: 50 Hz, Equipment: type plate available, Process chiller / Air-cooled chiller unit Type: Phönix PNG2 2501 HEX Special Manufacturer: MTA S.p.A. The Phönix PNG2 2501 HE models are compact water chillers suitable for outdoor installation. The unit is Eurovent certified. Equipment features: - xDRIVE controller system - Microchannel condenser coil - Sound-insulated compressor housing - Oversized evaporator and coil; evaporator flow rate: 35 m³/h / 88 m³/h Cooling capacity (kW): 270 Chilled water outlet/inlet temperature (°C): 7 / 12 Flow rate (m³/h): 46.3 Available pump head (bar): 0 Ambient temperature (°C): 35 Refrigeration circuit: - Refrigerant: R513A, GWP 631, safety classification A1 - Refrigeration circuits (number): 1 - Compressors (number): 1 - Capacity control (%): stepless from 25 to 100 Electrical data: - Voltage (V): 400 - Frequency (Hz): 50 - Phases: 3 - Max. power input (kW): 122 - Max. current (A): 201 - Starting current (A): 314 - Protection class: IP54 Dimensions: - Length (mm): 3465 - Width (mm): 2190 Hedpfx Aexazidoagjnl - Height (mm): 2425 - Weight (kg): 3767 - Connection: Victaulic DN 100 Serial No.: 2200xxxxx Year of manufacture: 2023 Condition: visually excellent, technically good Stock unit, new Price: on request in EUR (plus VAT, ex works MTA Italy) – 12 months warranty (Technical modifications and prior sale reserved!) Location: MTA, Tribano

Year of construction: 2024, condition: new, Selling a WLO 20 KW Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 20.00 kW maximum heating output: 23.00 kW / approx. 230 m2 in set: force axial fan speed: 1380 rpm and capacity: 2910 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible fireplace made of 5mm thick boiler plate large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 160 kg Gross weight: 180 kg Furnace lining: 12 firebricks replaceable large cast iron grate covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Hsdpfx Aeixun Toagenl Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 485mm x Overall Depth: 790mm x Overall Height: 1030mm Oven dimensions: Width: 380mm x Depth: 450mm x Height: 500mm Upper door dimensions (sheet 3 and 4 mm): width: 365 mm x height: 215 mm Bottom door dimensions (3 & 4mm sheet metal): Width: 365mm x Height: 295mm Top Loading Port Dimensions: Width: 285mm x Height: 195mm Lower Loading Port Dimensions: Width: 285mm x Height: 265mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 120mm Diameter exhaust outlet: Ø 130mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 300mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.30A Speed: 1380 rpm Air flow: 2910 m3 / h Safety: CE mark + protective net

Condition: new, Laser performance: 4Working Area: 1500 x 3000Loading Capacity: 1200x-travel: 1520y-travel: 3030precision of position: 0,05repeat accuracy: 0,03messurements (LxWxH): 10000 x 400 x 2120 FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Hedpfx Aoruwazjagonl Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera SPECIFICATIONSVALUEWorking Area1500 x 3000 mmLoading Capacity1200 kgX-Y Axis Travel1520 x 3030 mmZ Axis Travel300 mmX-Y-Z Axis Guideway4 Point Ball CagedX-Y Axis Drive SystemRackZ Axis Drive SystemBallscrewX-Y Axis Speed100 m/minZ Axis Speed30 m/minX-Y Position Accuracy0,05 mmX-Y Repeatability Accuracy0,03 mmTable Change Time10 secLaser SourceRaycus / Han’s / JPTLaser Source Output Power2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC Control SystemFscutLaser Cutting HeadRaytools / BOCI / WSXAssist GassesAir/Oxygen/NitrogenCooling TypeWater CoolingMachine Weight12000 kgMachine Dimensions (WxLxH)4400 x 10000 x 2120 mmGraphic Formatdwg / dxf / stpVoltage380 / 50 HzCertificationsCE / ISOWarranty2 Years

Condition: new, Laser performance: 4Loading Capacity: 1250x-travel: 2020y-travel: 4050z-travel: 350precision of position: 0,05repeat accuracy: 0,03Table change time: ca. 10coolant fittings: Wasserkühlerweight approx.: 11500messurements (LxWxH): 4400 x 10000 x 2120 FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Hnjdpfx Aaoruwbiegsl Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera SPECIFICATIONSVALUEWorking Area2000 x 4000 mmLoading Capacity1200 kgX-Y Axis Travel2020 x 4050 mmZ Axis Travel350 mmX-Y-Z Axis Guideway4 Point Ball CagedX-Y Axis Drive SystemRackZ Axis Drive SystemBallscrewX-Y Axis Speed100 m/minZ Axis Speed30 m/minX-Y Position Accuracy0,05 mmX-Y Repeatability Accuracy0,03 mmTable Change Time10 secLaser SourceRaycus / Han’s / JPTLaser Source Output Power2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC Control SystemFscutLaser Cutting HeadRaytools / BOCI / WSXAssist GassesAir/Oxygen/NitrogenCooling TypeWater CoolingMachine Weight11500 kgMachine Dimensions (WxLxH)4400 x 10000 x 2120 mmGraphic Formatdwg / dxf / stpVoltage380 / 50 HzCertificationsCE / ISOWarranty2 Years

Condition: new, Laser performance: 12Loading Capacity: 1250x-travel: 2020y-travel: 4050z-travel: 350precision of position: 0,05repeat accuracy: 0,03Table change time: ca. 10coolant fittings: Wasserkühlerweight approx.: 11500messurements (LxWxH): 4400 x 10000 x 2120 FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Hnjdpjruwbqefx Aagjl Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera SPECIFICATIONSVALUEWorking Area2000 x 4000 mmLoading Capacity1200 kgX-Y Axis Travel2020 x 4050 mmZ Axis Travel350 mmX-Y-Z Axis Guideway4 Point Ball CagedX-Y Axis Drive SystemRackZ Axis Drive SystemBallscrewX-Y Axis Speed100 m/minZ Axis Speed30 m/minX-Y Position Accuracy0,05 mmX-Y Repeatability Accuracy0,03 mmTable Change Time10 secLaser SourceRaycus / Han’s / JPTLaser Source Output Power2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC Control SystemFscutLaser Cutting HeadRaytools / BOCI / WSXAssist GassesAir/Oxygen/NitrogenCooling TypeWater CoolingMachine Weight11500 kgMachine Dimensions (WxLxH)4400 x 10000 x 2120 mmGraphic Formatdwg / dxf / stpVoltage380 / 50 HzCertificationsCE / ISOWarranty2 Years

Condition: new, Laser performance: 2Loading Capacity: 1250x-travel: 2020y-travel: 4050z-travel: 350precision of position: 0,05repeat accuracy: 0,03Table change time: ca. 10coolant fittings: Wasserkühlerweight approx.: 11500messurements (LxWxH): 4400 x 10000 x 2120 FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   Hnsdpfjruwbxsx Aagsl - Wireless remote access  - Automatic lubrication system - Dual camera SPECIFICATIONSVALUEWorking Area2000 x 4000 mmLoading Capacity1200 kgX-Y Axis Travel2020 x 4050 mmZ Axis Travel350 mmX-Y-Z Axis Guideway4 Point Ball CagedX-Y Axis Drive SystemRackZ Axis Drive SystemBallscrewX-Y Axis Speed100 m/minZ Axis Speed30 m/minX-Y Position Accuracy0,05 mmX-Y Repeatability Accuracy0,03 mmTable Change Time10 secLaser SourceRaycus / Han’s / JPTLaser Source Output Power2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC Control SystemFscutLaser Cutting HeadRaytools / BOCI / WSXAssist GassesAir/Oxygen/NitrogenCooling TypeWater CoolingMachine Weight11500 kgMachine Dimensions (WxLxH)4400 x 10000 x 2120 mmGraphic Formatdwg / dxf / stpVoltage380 / 50 HzCertificationsCE / ISOWarranty2 Years

Condition: new, Laser performance: 6Loading Capacity: 1250precision of position: 0,05repeat accuracy: 0,03Table change time: ca. 15coolant fittings: Wasserkühlerweight approx.: 17500messurements (LxWxH): 4400 x 9500 x 2350 mmMaximum speed: 120pipe diameter: 220Working Area: 2000 x 6000 FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   Hodpfx Aastwtn Ijgjnl - Wireless remote access  - Automatic lubrication system - Dual camera SPECIFICATIONSVALUEWorking Area2000 x 4000 mmLoading Capacity1200 kgX-Y Axis Travel2020 x 4050 mmZ Axis Travel350 mmX-Y-Z Axis Guideway4 Point Ball CagedX-Y Axis Drive SystemRackZ Axis Drive SystemBallscrewX-Y Axis Speed100 m/minZ Axis Speed30 m/minX-Y Position Accuracy0,05 mmX-Y Repeatability Accuracy0,03 mmTable Change Time10 secLaser SourceRaycus / Han’s / JPTLaser Source Output Power2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC Control SystemFscutLaser Cutting HeadRaytools / BOCI / WSXAssist GassesAir/Oxygen/NitrogenCooling TypeWater CoolingMachine Weight11500 kgMachine Dimensions (WxLxH)4400 x 10000 x 2120 mmGraphic Formatdwg / dxf / stpVoltage380 / 50 HzCertificationsCE / ISOWarranty2 Years