Used Electron Microscope for sale (8,414)

Condition: like new (used), Year of construction: 2019, functionality: fully functional, input voltage: 220 V, Equipment: documentation/manual, Microscopic 3D inspection scanner with measurement envelope of 1.6 x 1.2 x 0.8mm, height resolution 0.1 µm. The unit can take linear measurement in 3 dimensions and also measure edge radius between approximately 5µm and 100µm. It is complete with laptop loaded with the necessary software, dongle, and microscope stand. It has only been lightly used. Dodpfxox Ekuis Afnokh

Condition: used, Year of construction: 2000, turning diameter 600 mm turning length 850 mm swing diameter over bed slide 290 mm Control Siemens 840D Turning length: 850 mm Rotation diameter over table: 600 mm Dkodpfx Aeydfpdsfneh x-axis: 220 mm z-axis: 950 mm Control: Siemens 840D Speeds: 0-4500 rpm Tool revolver: 2 pieces Spindle bore: 65 mm Rotation diameter: 290 mm Feed rate x/y: 25 m/min Rapid traverse x/z: 25 m/min Working height: 1200 mm

Condition: good (used), Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection, electronic modules, PLC controller, digital input Dodpfx Afoh D Akzsnjkh -Manufacturer: Siemens, Simatic S7 Electronic Modules ET 200S -Type: 6ES7 132-4BD0O-OAAO -Number: 7 modules available -Dimensions: 55/15/H80 mm -Weight: 0.1 kg/pc

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 15 kg, warranty duration: 12 months, total height: 2,000 mm, type of input current: AC, total width: 1,000 mm, total length: 800 mm, overall weight: 800 kg, input voltage: 230 V, Equipment: documentation/manual, lighting, type plate available, Mahr Multiscope 400 Multisensor Measuring Device equipped with camera and Renishaw touch probe system Fully functional with factory acceptance before delivery! Comprehensive maintenance history Measuring range: 400x200x200 mm Maximum workpiece weight (glass plate): 15 kg Instrument weight: 800 kg Control cabinet weight: 90 kg External dimensions: 800x1000x2000 mm Maximum traverse speed: 150 mm/s Accuracy: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L = measurement length in mm) Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt 2025. Includes the latest software update for Windows 10 (Windows 11 upgrade and OptiCheck3D 2025 available as options), including free lifetime software hotline and user support. Optional: Delivery via factory service or forwarding agent, worldwide. Optional: On-site commissioning & calibration Optional: Training service Online and on-site demos available with customer parts, application consulting by accredited Profitech metrology laboratories during project planning. Available complete service: Dkjdpfxjw Slafo Afnjh – Delivery, installation, commissioning, acceptance according to standards, certification, and comprehensive acceptance documentation. Individual training and education programs also bookable as online courses. Creation of your measuring programs for direct operation with the device is also possible. Rental, lease-purchase, or financing possible directly via Profitech without any financial institution. The measuring device can be individually configured to customer requirements (within the EU). Reference number: 01814-1-ms400 (Please always include this with inquiries)

Condition: used, Hensoldt Wetzlar centering microscope MK4 Condition used Centering microscope with tightening thread Dkedpfsurlyqjx Afnoh suitable for lid machines

Condition: good (used), Time relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor -AC 24-240 V -0.05 s-100 h Price: per piece -Quantity: 3 available Dkodpjb A Ravjfx Afnjh -Weight: 0.2 kg

Condition: used, Year of construction: 1996, turning diameter 250 mm weight of the machine ca. 8 t PHILIPS CNC control X-axis: 295 mm / Y-axis: 295 mm Center distance: 1000 mm Max. diameter on the bed: Ø 310 mm Dsdpfx Afeyan R Aonjkh Max. diameter when turning: Ø 250 mm. Maximum turning speed: 4500 rpm. Spindle bore diameter: Ø 78 mm Turret with 8 tools Weight: approx. 8 tons

Condition: used, Keyence Type: VHX-5000 Only 10 operating hours! Technical data: Frame rate: 50 F/S (max.) Resolution: Normal: 1600 (H) x 1200 (V) Approx. 1000 TV lines 3CMOS *1, *3: 1600 (H) x 1200 (V) Approx. 1200 TV lines (2 million pixels x 3CMOS mode). Excellent color reproducibility. High Definition*3: 3200 (H) x 2400 (V) Approx. 1600 TV lines Super fine*3: 4800 (H) x 3600 (V) Approx. 2000 TV lines or more 18 Megapixel x 3CMOS*2, *3: 4800 (H) x 3600 (V) Approx. 2000 TV lines or more (18 million pixels x 3CMOS mode). Excellent color reproducibility. High dynamic range: Each RGB pixel in 16-bit resolution Electronic shutter: Automatic, Manual, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/9000, 1/19000 Supercharge shutter: 0.2 sec. to 4 sec. Adjustable in 0.1 sec. steps. White balance: Push-set, auto, manual, preset (2700 K, 3200 K, 5600 K, 9000 K) LCD monitor*5: Size color LCD (IPS) 23" Panel size 509.184 (H) x 286.416 (V) mm Pixel pitch 0.2652 (H) x 0.2652 (V) mm Number of pixels 1920 (H) x 1080 (V) (FHD) Display color approx. 16.77 million colors *4 Brightness 300 cd/m2 (center 1 point, typical) Contrast ratio 1000:1 (typical) Viewing angle ±89° (typical, horizontal), ±89° (typical, vertical) Approx. 1,680,000 images (if a 2-megapixel image is compressed) up to approx. 55,000 images (if a 2-megapixel image is not compressed) Image format: With compression: JPEG; Without compression: TIFF Maximum image size 20,000 pixels (H) x 20,000 pixels (V) (with image stitching function) Light source: Super bright LED lamp Lamp life 40,000 hours (reference value) Color temperature 5700 K (typical) List of components: VHX-5000 control unit VHX-2000D digital microscope VHX-S90BE Free-angle Observation System base unit VHX-S90F Free-angle Observation System lens holder Dsdpfjwr Ax Hjx Afnokh VH-Z250R Dual-light high-resolution zoom lens 250x - 2500x Condition: used Scope of delivery: (As shown) (Changes and errors in technical data and information excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), TAMAR Type: FEMET_WI_ID071_TAMAR light microscope PLMIS Light microscope Dodpfx Afjh Nmtgjnjkh The TAMAR light microscope ID071 is used for the optical inspection of samples with a maximum size of approx. 780x650mm2 (substrate size) in the PLG clean room. Substrate size complete substrate size (780x650mm2) Objective: The objective focuses the light emanating from the observed object into a real image for the viewer. Bright field mode (BF), the light coming from the microscope is directed through the objective to the sample. High resolution, low contrast Dark field mode (DF)  Illumination mode to increase contrast, high contrast for edges and particles. Principle: The center of the incident light beam is covered, only peripheral light is directed through the objective and hits the side of the sample. Edges and particles appear bright and the smooth background dark. TAMAR light microscope ID071 X-Y Stage Software Revision 1.0 Condition: used Scope of delivery: (Autosampler as shown) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you an et ETSYSTEM Electronic Load GPIB. 32615A AC & DC Electronic Load GPIB/RS232 300V, 108A, 10800VA The 3260A series is a 300V high power AC and DC load in one unit and provides an ideal test solution for UPS, AVR and D/A inverters, especially for DUTs with step or square waveforms Each high power series AC&DC load has its own control and display panel and 5-state recall/memory, allowing for more efficient load setup Adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment Built-in GO/NG gauge test function provides short test result diagnosis for production and QC test throughput Features Voltage, current, wattage and VA variable display. CC, Linear CC, CR and Crest Factor modes. GPIB/RS232 interface and 5 status recall/memory. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W and ℃. Dual 4 1/2 meter display for voltage, current, watts and VA. Suitable for sine, square and step waves. Width 600 mm Height 1506 mm Depth 600 mm 196kg Type: 32615A AC & DC Electronic Load Condition: used / used Djdpom Tvyxsfx Afnskh Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Shimadzu Type: Prestige-21 / with AIM-8800 infrared microscope Shimadzu IR Prestige-21 infrared spectrophotometer The IRPrestige-21 is designed for both highly sensitive and broad applications in the areas of research and development. It is an excellent addition to the existing FTIR series, which covers the standard laboratory area, among other things. AIM-8800 specifications Optics: 15 x Cassegrain objective 15 x Cassegrain condenser mirror with inlet for flushing MCT detector: with liquid nitrogen monitoring system Wavelength range: Type 1 - 5000 - 720 cm -1 Type 2 - 5000 - 650 cm -1 Electrically activated aperture XY Θ directional drive. The setting of the XY direction increments is 1 µm above the sample surface and 1° steps in the Θ direction (numerical input possible). Minimum setting value: 3µm Motor-driven XY sample stage Positioning range: X-axis: 70 mm; Y-axis: 30mm Resolution: 1 µm pitch Sample thickness: Reflection mode - ≤ 40mm Transmission mode - ≤ 10mm Operation via the keyboard of the main unit Measurement mode selection / XY stage operation (4-step speed control) / manual focusing / illumination control (Optional) Control via PC Measurement mode selection / XY stage operation / automatic centering / manual focusing / automatic focusing / illumination control / Aperture setting / Aperture preview / Measurement position and aperture setting recording (10 sample positions, 2 background positions) Environmental conditions: Dkedpsf I Ew Hofx Afnsh Ambient temperature: 15°C ~ 30°C Humidity: 70% or less External dimensions, weight: W410mm x D540mm x H520mm x 36kg Condition: used / used Scope of delivery: (See picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), For sale: Professional digital microscope KEYENCE VHX-7000 – fully complete, in excellent working order, ready-to-use system for quality control, laboratory research, and production applications. ⸻ Configuration / Included • Main unit VHX-7000 • Original KEYENCE VHX monitor • Motorized XY stage + motorized Z axis • KEYENCE VHX-S770E objective lens • Control panel (manual controller) • 2× original KEYENCE carrying cases – Lens Case • Cables, accessories, mounting components • Manufacturer's documentation ⸻ Condition and Calibration • Technical condition: very good Dksdpfeyc H Rgex Afnsh • KEYENCE calibration certificate – 12/2023 (Acceptable) • Industrial equipment, Made in Japan • No modifications, complete nameplates ⸻ Applications • Quality control (QC) • R&D laboratories • Surface analysis, defectoscopy • Measurement and image documentation in production ⸻ Why choose this unit • Full configuration (monitor + XY + Z + lens) • Recent calibration • Original cases and accessories

Condition: ready for operation (used), Wild Heerbrugg MDG 17 Type S Leica DFC320 High End Microscope Camera With PC and software Microscope: Manufacturer: Wild Heerbrugg Type: MDG 17 Type S Camera: Dsdpevwlitjfx Afnjkh Manufacturer: Leica Type: DFC 320 You are welcome to come by for a viewing. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and take a look at our other offers. The company names and trademarks given are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article can occur and are reserved.

Condition: used, Year of construction: 2014, Feed diameter max. 250 / 315 mm Circular diameter 350 mm Workpiece diameter max. 250 mm Travel: X-axis: 745 mm Z-axis: 300 mm Loading times: Loading times (depending on workpiece) 4–6 seconds Main spindle: Spindle flange DIN 5502: 6 Spindle bearing, front through. Max. 110 mm Speed max. 5500 rpm Dkodpjyan Rpjfx Afnoh Disc turret: Number of tool holders: 12 Shaft diameter: 40 mm Powered tools Maximum power: 8.5 kW Speed: max. 6000 rpm Turret swivel time: 0.3 s Control: Bosch Rexroth MTX

Condition: refurbished (used), Electronic clamp with electronic opening and closing. With electronic reading of longitudinal and transverse sections. Dksdpfx Afeyf D Dvonjh

Condition: excellent (used), Professional stereo microscope KERN OZT 464 from the renowned German manufacturer KERN & Sohn GmbH, designed for industrial, laboratory, electronics, and research applications. Equipped with a high-quality ODC824 digital camera (3.1 MP CMOS, USB 2.0), enabling direct image transfer to a PC – an ideal solution for documentation, inspection, and analysis. Technical specifications: • Microscope model: KERN OZT 464 • Type: stereo, binocular with trinocular camera port • Eyepiece: widefield WF 10x/20 mm • Magnification: approx. 7x – 45x (standard) • Illumination: adjustable LED, upper and lower • Power supply: 100–240 V, 50/60 Hz • Camera: KERN ODC824, 3.1 MP, 1/2” Aptina CMOS, USB 2.0 • Image capture and analysis software (Windows compatible) • Includes power and USB cables Condition: • Device in very good condition, fully functional Dsdpfx Asxmlfiofnokh • Clear and sharp image, smooth mechanical operation • Complete set with all cables, protective cover, and digital camera Applications: • Research and industrial laboratories • Quality control and metrology • Electronics servicing and micromounting • Education, science, and microscopic documentation

Condition: excellent (used), For sale: precision toolmakers' microscope from renowned Japanese manufacturer Mitutoyo, model TM-101 (Code No. 176-901). This device is designed for inspection of dimensions, shapes, profiles, surfaces, and contours in tool rooms, measurement laboratories, and quality control departments. Manufacturer: Mitutoyo Mfg. Co. Ltd. Japan Type: TM-101 Mitutoyo digital readouts on X and Y axes with ABS and INC functions, preset, and data output Measuring cross-table with rotation and adjustment Lighting functions: Surface, Contour, Main Power supply: AC 220V, 50–60 Hz, 8 VA Robust, stable industrial construction Very good condition, complete device, technically fully functional and ready for operation. Ideal for measuring cutting tools, milling cutters, drills, inserts, inspection of precision components, as well as contour, thread, and geometry measurements of workpieces. Dsdpfew R E Hijx Afnjkh

Condition: used, functionality: fully functional, machine/vehicle number: 14324, Equipment: documentation/manual, lighting, For sale: Zeiss Jena Workshop Microscope WEMI – Large Version – with various accessories Offered for sale is a Zeiss Jena large workshop microscope, type WEMI, suitable for precise inspection and measurement applications in metalworking, toolmaking, quality control, and education. This robust and stable workshop microscope is renowned for its high optical quality and reliability. Thanks to its large design, the system is particularly suitable for inspecting larger workpieces with high precision. Specifications and features: • Manufacturer: Zeiss Jena • Type: WEMI (Werkstattmikroskop) • Model: Large workshop version • Very stable cast iron construction • High-quality Zeiss optics • Suitable for measurement, inspection, and visual control • Fine and precise focusing • Original operation manual included Accessories (including): • Various objectives • Eyepiece(s) • Analog measuring device • Illumination • Additional accessories as shown Condition: • Used, in good working order • Optics clear and undamaged • Normal signs of use consistent with age Delivery: • Includes all accessories as shown Price: Dkodpfx Aex Ivr Eefnsh • On request Location: • Klazienaveen, Netherlands If you are interested or require additional information, photos, or a viewing, please feel free to contact us via Machineseeker.

Year of construction: 2014, condition: like new (used), Capacity approx. 60.000 kg bracket dimension approx. 463 mm Accuracy of the display capacity approx. +/- 0.03 % Smallest display digit 20 kg Dsdpfjd R Racox Afnokh Digit height 50 mm Reading distance up to min. 60 m Power supply 12 V rechargeable battery Charger 12 V/4A with charging current limitation Crane scale equipped with: - Single hook size 40 - single fixture - storage rack - charger - Infrared control for activating the balance functions - Integrated overload protection - Automatic switch-off, variably adjustable from 0-99 minutes

Condition: ready for operation (used), Professional, heavy-duty version by HANG (German quality) in neat, complete condition. Highly suitable for binderies, printing shops, and print departments. ⸻ Specifications • Brand / Model: HANG 107-30 electronic • Serial number: 102553 • Year of manufacture: 2002 • Number of drilling heads: 4 pieces, individually adjustable • Electronic control, automatic drilling cycle • Power connection: 400V – 50Hz – 6A • CE certification present • Cast iron frame, extremely robust construction • Manual and automatic operation • Adjustable stops with fine adjustment • Machine is mounted on swivel casters (easily movable) ⸻ Condition • Removed from production in working order • Drill spindles and guides run smoothly • No damages, normal signs of use • Immediately ready for operation • Complete, as shown in the photos ⸻ Description The HANG 107-30 is one of the most robust paper drilling machines on the market. Heavier-duty and more professional version than the standard models, thanks to the sturdy drilling heads, automatic drilling cycle, and reliable electronic control system. Perfect for calendar production, book blocks, brochures, index tabs, and more. ⸻ Price 👉 € 3,250 net (0% VAT export possible) Dodpfxjx A Izle Afnekh

Condition: used, functionality: fully functional, type of input current: AC, input voltage: 240 V, Equipment: type plate available, Used Keyence Digital Microscope VHX 900/950F Set in Flightcase Manufacturer: Keyence Model: VHX 900/950F Voltage: 100-240 VAC (50/60 Hz) Set consists of: – Digital microscope + power cable – Digital camera – Lens (Keyence VH-Z20R) – Camera holder + mount – Keyboard + mouse – Console controller – Flightcase Dkjdjv A Uptopfx Afnsh

Year of construction: 1999, condition: excellent (used), Electronic cards Cc100 - Angel year 1999 PS244 PD242 CU 201 CU 211 DO 321 Di 325 Dksdpjhgka Ajfx Afnsh AR 281 SR 161 BC 082 OUTPUT TT 081

Condition: excellent (used), Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: VZ0250A) LOADING SYSTEM “RBO” Tornado C 1300 with motorized rollers table and conveyoring belts to in-feed the 1st multi-borer VZ0250B) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 4 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 ea) - No. 3 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 3 top pressing devices - No. 2 endless screws to evacuate the wastes. With CNC NC 500 to control, manage and run the 2 machines of this line VZ0250C) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT with CNC Dkjdpfsd Nviqox Afnoh - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 6 inserting nozzles, such as Glue injectors and dowel drivers) - No. 2 bottom units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 2 Top pressing devices - No. 2 endless screws to evacuate the wastes. VZ0250D) BRUSHING-CLEANING MACHINE "PIZZIGALLI" Mod. GP 11 VZ0250E) UNLOADING “RBO” Tornado SC/FE 1300 with motorized rollers table and conveyoring belts out-feed from 2nd multi borer (and dowels inserter)

Condition: excellent (used), Through-feed Drilling ELECTRONIC LINE (3 machines), CNC controlled, J06031) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 2.3 each) - No. 6 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 ea) - No. 6 top vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 top pressing devices + No. 2 endless screws to evacuate the wastes. J06032) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 2.3 each) - No. 6 bottom units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 top vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 Top pressing devices + No. 2 endless screws to evacuate the wastes. J06033) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 4 bottom units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 4 Top pressing devices + No. 2 endless screws to evacuate the wastes. With CNC (software Tooling System + Woodmaster) The CNC controls the movement (X axe) of the mobile horizontal unit Dkjdpfxjg Urn Ej Afnjh The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units The CNC controls the movement (Y1 and Y2 axes) of the boring heads The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts

Condition: excellent (used), Automatic through-feed ELECTRONIC Drilling LINE (CNC controlled): Also for NARROW PIECES (min. mm 100). W05024F) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - N° 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.5 each), - N° 6 bottom vertical units (each with 2 drilling heads at various spindles, HP 2.3 each) - N° 4 top vertical units (each with 2 drilling heads at various spindles, HP 2.3 each) - N° 6 top pressing devices + N° 2 endless screws to evacuate the wastes. With CNC - PC DESK TOP (Modul Editor) - software Tooling System W05024G) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.5 each), - No. 6 bottom vertical units (each with 2 drilling heads at various spindles, HP 2.3 each) - No. 3 top vertical units (each with 2 drilling heads at various spindles, HP 2.3 each) - No. 6 top pressing devices + N° 2 endless screws to evacuate the wastes. 2nd Drilling Machine connected to the NC of the 1st Machine Dksdpfx Aju Tp Slsfnoh