Used Ehrle High Pressure Washer for sale (32,085)

Condition: used, Falch 3 phase high pressure cleaner 500 bar pressure @ 15lpm only done about 360 hours and works perfectly. Sold with trigger but no hose used for cleaning boat hulls stone work excavator tracks and any cleaning where very high pressure is required Caodpfx Abjxc Numeboa

Condition: ready for operation (used), A high-pressure pump BFT with Rexroth and VEM components is available. Pressure: approx. 4000bar, motor power: approx. 37kW. An on-site inspection is possible. Cedpexxa T Esfx Abbeaa

Condition: good (used), water pressure: 1,500 bar, Aquablast DUO surface cleaner. Clean, demolish, and strip surfaces with high-pressure water. Clean, strip, remove, demolish, and roughen Caedpfsv S Ep Ajx Abbsa The Aquablast offers numerous applications for every surface. Different results are achieved depending on the pressure and flow rate. Applications range from thorough surface cleaning to targeted removal of solids.

Condition: used, 2 no. LNS Chipblaster SA-34K year 2019 and 2022, high pressure coolant system Casdpfx Abewz Iipsbsa

Condition: used, Year of construction: 2017, operating hours: 300 h, functionality: fully functional, total width: 2,160 mm, total length: 1,350 mm, total height: 1,700 mm, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, overall weight: 1,850 kg, rotational speed (max.): 1,800 rpm, high-pressure hose length: 20,000 mm, empty load weight: 1,850 kg, fuel tank capacity: 140 l, type of cooling: water, power: 120 kW (163.15 HP), water pressure: 2,500 bar, pump capacity: 25 l/min, Equipment: crane, type plate available, CD160-2500 with 2500 bar and 25 l/min. The pump is powered by a water-cooled 4-cylinder SISU diesel engine. The entire frame is made of hot-dip galvanized steel, ensuring long durability and corrosion resistance. The frame is equipped on all four corners with rubber feet, forklift pockets, and lifting eyes. The machine features a galvanized roof plate with a side mount for the protection and storage of, for example, high-pressure hoses. Similar to but not a Dynajet, Falch, Hammelmann, Kamat, Uraca, Woma, etc. Codpsxufbtefx Abboaa General Specifications: Operating pressure: 2500 bar Flow rate: 25 l/min Max. pump speed: 560 rpm Drive engine: 4-cylinder SISU diesel Drive engine output: 119.3 kW Drive engine speed: 1800 rpm Tank: 140 L Max. fuel consumption: 26 L/h Dimensions and unladen weight (SKID): 2160 mm x 1350 mm x 1700 mm (1850 kg) Standard accessories included.

Condition: used, Hydraulic machine vice, high-pressure clamp ARNOLD / FRESMAK Jaw width: 160 mm Jaw height: 50 mm Clamping force: 5 tons Clamping range: 0 to 305 mm Maximum opening: 308 mm Guideway height: 112 mm - 2 clamping ranges adjustable via locking pin, 0 to 158 and 148 to 308 mm Cajdpoxp R E Tefx Abboa - with rotary plate Dimensions (L x W x H): 580 x 325 x 165 mm Own weight: 65 kg Good condition

Year of construction: 2000, condition: excellent (used), Atlas Copco Crepelle high pressure compressor Type: D44 Year of manufacture: 2000 Casdpfjf Hly Ssx Abbja Operating pressure: 40 bar Power: 220 kW Speed: 839 RPM Compressor can be inspected at any time.

Year of construction: 2018, condition: used, 2018 | Kärcher HD6/15C Pressure washer 150bar/230V | Used Small Equipment ❓ Want the expert inspection report with 1 checked points, 8 extra photos and a full video? Contact us! 💡 Listed in a Bid-to-Earn auction: ✔ Earn rewards while bidding – see your reward for each bid ✔ Get your full bid amount back if outbid ✔ Rewards are credited when the reserve is met ✔ Highest bidder wins when the auction ends Codpfjx Agaysx Abbjaa 💡 Why choose us? ✔ Fully inspected machines ✔ Delivered to your jobsite – :articulated_lorry: estimate your shipping cost with our calculator ✔ Money-Back Guarantee ✔ Secure payment methods incl. pay-at-delivery option ✔ Data-driven market pricing 📍 Location: Estonia, Tallinn This machine is available on the Equippo Marketplace as part of a special BID TO EARN AUCTION format.

Condition: good (used), Year of construction: 2011, machine/vehicle number: HD 11009208-2, pressure: 350 bar, overall weight: 890 kg, rotational speed (max.): 1,500 rpm, power: 31 kW (42.15 HP), Equipment: type plate available, Used high pressure pump. Technical specifications: Year of manufacture: 2011 Type: RS716E/350 Serial number: HD 11009208-2 Caodpjtuqmgsfx Abbea 31 kW 350 bar 1500 1/min 47 l/min With Hammelmann ACM 225S-4/HE 400/690V 66.2/38.4A 50Hz 37kW 1480 1/min Condition: used (see pictures and type plates) Scope of delivery: 1 pump

Condition: excellent (used), Year of construction: 2017, operating hours: 966 h, functionality: fully functional, machine/vehicle number: G57200327, pressure: 500 bar, operating pressure: 500 bar, fuel: diesel, temperature: 100 °C, pump capacity: 30 l/min, Falch TrailJet 30 500-30-100-d – Hot Water High-Pressure Trailer Year of manufacture: 2017 | Operating hours: 966 h | Condition: well-maintained & ready for immediate use LOW OPERATING HOURS – IMMEDIATELY READY FOR USE!! For sale is a powerful Falch TrailJet high-pressure trailer with hot water function – ideal for professional industrial, cleaning, and restoration applications. Suitable for cleaning surfaces, pipes, industrial facilities, etc. Technical Specifications Model: Falch TrailJet 30 500-30-100-d Working pressure: up to 500 bar Water flow rate: 30 l/min Temperature: up to 100 °C (hot water) Engine: Diesel engine Registration documents: fully available Equipment Trailer box (enclosed system, mobile & road-approved) Radio remote control Easydriver Active 2.8 manoeuvring system (Reich, year of manufacture 2021) Service will be performed prior to handover Condition Cedpfxjxt Rhie Abbjaa Machine has been regularly maintained Fully functional, ready for immediate use Normal, age-related signs of wear Inspection and test run possible by appointment. Sale to commercial buyers (B2B) only.

Condition: reconditioned (used), Year of construction: 2017, operating hours: 1,651 h, functionality: fully functional, machine/vehicle number: G393, operating pressure: 500 bar, total length: 1,175 mm, total height: 945 mm, total width: 760 mm, pressure: 500 bar, type of input current: three-phase, empty load weight: 290 kg, input voltage: 400 V, power: 15 kW (20.39 HP), input current: 32 A, noise level: 78 dB, pressure (max.): 500 bar, input frequency: 50 Hz, water pressure: 500 bar, Dear Sir or Madam, For sale is an overhauled Falch WheelJet 15 Electric without accessories. 500 bar 15 l/min 32A plug Casdpfx Abexugifobsa Best regards, STS-Reinigungstechnik Team

Condition: excellent (used), Year of construction: 2017, operating hours: 4,000 h, functionality: fully functional, operating pressure: 2,500 bar, Used Falch Trail Jet 125 high-pressure washer with 2500 bar pressure. The unit is in very good technical condition and ready for operation. Included with the device are the following items: - 3 new Falch high-pressure hoses - 3 used Falch high-pressure hoses - 3 control cables for connecting the Falch gun - New Falch 4-nozzle rotary head - Falch gun - 3 lance extensions for the Falch gun - Additional components for the machine: sets of seals, filters, etc. The machine has been serviced at the Falch headquarters and has operated for 5 hours since service. Machine data: Year of manufacture: 2017, power: 129 kW, Deutz engine. Codpfxoxzk U Se Abbeaa The machine allows for adjustable working pressure.

Condition: new, Year of construction: 2024, operating pressure: 250 bar, total length: 878 mm, high-pressure hose length: 10,000 mm, total height: 702 mm, total width: 538 mm, empty load weight: 57 kg, fuel: super 95, warranty duration: 24 months, We offer for sale the HD 9/25 G Classic petrol-powered high-pressure washer. Condition: New Year of manufacture: 2024 Caodpfxox At R Ej Abbja Technical specifications: - Pump performance (l/h): 900 - Working pressure (bar): 250 - Maximum pressure (bar): 300 - Water connection: R 3/4″ - Drive type: petrol - Engine type: G390FA - High mobility - Colour: anthracite - Weight with accessories (kg): 56.8 - Dimensions (L x W x H) (mm): 878 x 538 x 702 Scope of delivery: - Standard spray gun - 10 m high-pressure hose - Crankshaft pump with ceramic pistons - Power nozzle - Protection frame - Water filter Features: Independence - No reliance on external power sources. - Compliant with EU STAGE V emission standards. - Convenient manual start. High mobility - Puncture-proof wheels. - Compact and easy to manoeuvre in confined areas. - Fits inside a vehicle. Robust and durable design - Sturdy tubular frame protects the pump from damage. - High-pressure pump equipped with a safety valve and water filter. - Crankshaft pump with ceramic pistons. Accessory storage - Holder for power leads and accessory compartment for easy storage and transport. - Ergonomic handle and convenient hose storage. The HD 9/25 G Classic cold-water high-pressure cleaner, with a working pressure of up to 250 bar, a delivery rate of 900 litres per hour, and a durable crankshaft pump, is designed to handle even the most demanding cleaning tasks. Its high-performance EU STAGE V petrol engine eliminates the need for external power sources. Sturdy tubular steel frame and puncture-proof tyres make it ideal for challenging tasks on construction sites, in industry, municipal areas, or service companies in the construction sector. The ergonomic handle, very compact dimensions, and dedicated accessory holders (e.g., for high-pressure hose and lance) simplify operation and allow for easy transport by vehicle. All major components are easily accessible for servicing and are effectively protected by thermal and safety valves. Please note: The machine does not support suction from alternative water sources.

Condition: new, Year of construction: 2024, functionality: fully functional, HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. HIGH-PRESSURE PUMP HT SERVO-JET4000 Csdpfxou Hz Tqo Abboaa A well thought-out principle with great effect. + Up to 40 % energy savings compared to conventional systems, Investment eligible for subsidies + High energy efficiency: servo direct drive, no reactive current, low and and flexible power consumption + Low connected load required: no power consumption when the WSS system is at a standstill of the WSS system, suitable for companies with low energy supply + 3-piston plunger pump: high liter capacity and high efficiency of up to 98 %, replaces 6000 bar technology, long maintenance intervals, simple design, no hydraulic system, no warm-up and start-up phase - ready to start immediately + Permanent pressure control and integrated pulsation damping: Continuous readjustment of the cutting pressure to the set value - no pressure fluctuations, higher cutting speed than with a pressure intensifier in a comparable combination + Lowest noise level of 75 dB: high-quality complete unit with soundproof housing + Can be used universally for all waterjet machines and brands

Condition: good (used), Year of construction: 2009, machine/vehicle number: HD 10906347, pressure: 350 bar, overall weight: 850 kg, rotational speed (max.): 1,500 rpm, power: 35 kW (47.59 HP), Equipment: type plate available, Used high pressure pump. Technical specifications: Year of manufacture: 2009 Type: RS716E/350 Serial number: HD 10906347 35 kW 350 bar 1500 1/min 47 l/min With Küenle KDGN 225S4 NV 400 / 690V 67.2 / 39A 50Hz 37kW 1475 1/min Cjdotuqmkopfx Abbsaa Condition: used (see pictures and nameplates) Scope of delivery: 1 pump

Condition: repair required (used), Year of construction: 2011, functionality: not functional, machine/vehicle number: 8506, operating pressure: 2,000 bar, Equipment: documentation/manual, 1. Product Overview We are pleased to offer a second-hand MiniDeBEE New Generation of High Pressu Homogenizer, specially suited for cell lysis, particle size reduction, production of nano and micro-emulsion. Perfect mix between laboratory and pilot scale. Scaling up guaranteed. 2. Technical Specifications Model: MiniDeBEE 2011 - up to 2000 bar Max Flow rate: 200 ml/min Casdpexuvm Hsfx Abbea Condition: Used for 1.5 years at Cosaic - Currently NOT FUNCTIONAL ; (problem diagnosed with Pion’s support.Cost repair spare parts up to 2500 EUR;

Condition: like new (used), Year of construction: 2025, operating hours: 30 h, functionality: fully functional, pressure: 2,800 bar, overall weight: 3,000 kg, rotational speed (min.): 1,900 rpm, pump capacity: 30 l/min, Equipment: type plate available, HAMMELMANN AQUAJET 144 Year: 11/2025 2800 BAR Manufacturer's warranty Engine: DEUTZ TCD 6.1 ST5 140 kW Available immediately Caodpfjvgrpxsx Abbja

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Niebling HPF SAMK400 High Pressure Forming Machine (2022) with EEM module automatic film loading from magazine stack FAM module automatic removal of protective film SSR FIM2-607dr LC pro HPN ultra violet (UV) lacquer curing system with conveyor (2022) Kuka Cybertech 2 series KR 22 R1610-2/SEC robot with controller & 2x tool stands Niebling NST 100 Intelligent Servo Punch (2022) Kist + Escherich Taifun-Clean workpiece cleaning station with Wanderes brush Rotary inspection table with camera, laser station & Keyence scanner stations, Epson placing & take off robots with controllers Casdpoxlgwwefx Abbsa ESTA Dustomat 16M mobile dust extractor SAR process automation and product magazine storage with RFID traceability

Condition: used, Mechanical high-pressure machine vice GRESSEL Type MHS 126-3 High-pressure clamp Jaw width: 125 mm Jaw height: 40 mm Opening width: 177 mm Clamping pressure: 2 / 3 / 4 tons Guide rail height: 62 mm - Clamping force adjustable in 3 stages - High-pressure clamp with mechanical power amplifier - Clamping range adjustable in 2 stages - Lateral thread for workpiece stop Dimensions: 440 x 140 x 103 mm Caodpfjxf U Ahsx Abbea Weight: 26 kg Good condition

Condition: used, Year of construction: 2007, operating hours: 5,573 h, functionality: fully functional, operating pressure: 1,200 bar, power: 122 kW (165.87 HP), pump capacity: 40 l/min, Equipment: type plate available, FALCH type T12, year of manufacture 2007, machine output 122KW/1200BAR/40 litres per minute. The unit is fully functional, featuring a bypass modification from water to air and a refurbished external machine cover. Supplied with basic equipment: control gun with rotary nozzle, control cable, and 20m high-pressure hose. Caedpfsxyx Evsx Abboa

Condition: good (used), Year of construction: 2017, machine/vehicle number: HD 11610556, pressure: 350 bar, overall weight: 850 kg, power: 30 kW (40.79 HP), Equipment: type plate available, Used high-pressure plunger pump with integrated gearbox and special crosshead seal. Designed for low-viscosity media. Main areas of application in industry and services: - Sewer cleaning - Descaling - Industrial high-pressure cleaning - Special applications Technical specifications: Type: KD716-GK Year of construction: 2017 30kW Pressure: 350 bar 1500 1/min 47 l/min With Elektra electric motor 14BG 220-4AA60-Z 225S 400 / 690V 68 / 39.5A Cajdpfotuqlxex Abbea 50Hz 37kW 1475 1/min Condition: used (see pictures and type plates) Scope of delivery: 1 PUmpe

Year of construction: 1998, condition: good (used), machine/vehicle number: 98.01112.1773, Stationary high pressure pump unit Hammelmann HDP 122 on base frame without engine. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Working pressure: 530 bar Delivery rate: 55 l/min. Drive speed: 1500 rpm. Codpegz H Akofx Abbjaa Driving power: 55 kW without motor, with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 2000x1000x1400 mm weight: approx. 300 kg year of construction: 1998 Condition: in good used condition.

Condition: ready for operation (used), Year of construction: 2017, Bio Circle HP High-Pressure Parts Washing Table Parts Cleaning Machine Parts Cleaning Year of manufacture: 11/2017 Load capacity: 350 kg Usable volume: 100 l Heating power: 0.65 kW Max. power: 2.5 kW Caedpexrclqsfx Abbsa Operating pressure: 40 bar Weight: 250 kg Usable working area: 860mm x 580mm x 480mm You are welcome to arrange a viewing. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided you have a valid VAT ID. Subject to prior sale. Visit our shop to view our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the item description may occur and are subject to change.

Condition: used, Year of construction: 2022, operating hours: 45 h, functionality: fully functional, operating pressure: 3,000 bar, fuel: electricity, Demonstration machine, Machine available immediately. Only used for demonstrations. Only 45 hours on the hour meter. Technical condition: like new. Cjdpfx Ajxwb Egobbeaa Complete set: Robot + radio remote control + control unit + support winches. Operates with a 200 kW high-pressure pump (recommended by the manufacturer, but can be configured differently). Worldwide shipping available. Similar to, but better than: Vertidrive, Falch, Kamat, Robot PlusPlus. SPIDERJET® surface preparation devices — Whether cleaning, paint stripping, or de-coating large steel structures such as ships, tanks, or vessels, the SPIDERJET® surface preparation equipment delivers fast and clean results and, thanks to compact versions, can be maneuvered even through the narrowest areas. Minimal setup times ensure rapid deployment, and the use of high-pressure water without additives or chemicals protects the environment. High coverage rates and semi-automatic operation reduce working time and costs while increasing work safety.

Year of construction: 2008, condition: used, High-pressure KAMAT pump with IVECO diesel power unit in fully operational condition featuring new Siemens electronic controls. Machine output: 130 kW/1180 bar / 57 l-min. The unit has its own stainless steel water tank with a capacity of 3,000 liters. VOLVO FL 240 truck with hydraulic tail lift, year 2009, 154,989 km. The machine can also be sold separately without the truck. Price for standalone KAMAT unit: €20,000. Price for VOLVO: €13,500. Csdpfx Abjxyxy Hsbeaa