High pressure pump unit 440bar 92l/min

Hammelmann HDP 122

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: B6.01122.2949, total width: 2,000 mm, total length: 850 mm, total height: 1,400 mm, pressure: 460 bar, operating pressure: 460 bar, type of input current: three-phase, overall weight: 1,698 kg, rotational speed (max.): 1,800 rpm, power: 0.089 kW (0.12 HP), Hammelmann HDP 122 stationary high-pressure pump unit on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 122 Operating pressure: 460 bar Delivery rate: 104 l/min. Drive speed: 1800 rpm. Drive power: 89 kW Nodoqhnrhopfx Amnsct with ACM 315 S-4/PHE electric motor 110 kW, IP55 with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 2,000x850x1,140 mm Weight: approx. 1,698 kg Year of construction: 2016 Condition: In very good used condition. 2 pieces available.

Condition: used, Year of construction: 1985, x-travel 485 mm y-travel 385 mm z-travel 380 mm table surface area 800 x 460 mm spindle taper SK 40 control CONTOUR 1 spindle turning speed range 50 - 2500 U/min feeds 10 - 1000 mm/min rapid traverse 2 m/min table load capacity 600 kg quill stroke 80 mm total power requirement 7,5 kW weight of the machine ca. 2,0 t dimensions 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant Nedpfxjtqqlle Amnjct - movement of X/Y/Z also possible via handwheels -

Year of construction: 1992, condition: excellent (used), Gas burner Weishaupt WM-G50/2A version ZM Power 600-5200KW: Year:1992 including gas line from Dungs DN50. Мы говорим по русски! Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Nsdpfxjhl In Rs Amnjct Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, empty load weight: 2,450 kg, Charmilles Robofil 240 Year of manufacture 2001 Travel distances (X / Y / Z): 350 x 220 x 220 mm Travel distances (U / V): 350 x 220 mm Max. taper angle: +/- 30° at 220 mm height Nedpfx Aowqdrromnsct Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1000 x 550 x 220 mm Maximum workpiece weight: 750 kg Cutting speed of 300 mm²/min Best surface: Ra 0.22 µm Available wire diameters: 0.10 mm to 0.33 mm Dimensions of the complete system: 2020 x 2050 x 2000 mm Total weight of the system: 2450 kg The machine is cleaned, overhauled, and tested by us before delivery. We are happy to offer you the commissioning of the machine.

Condition: excellent (used), the plant is consisting of: - 2 chain separators - 2 55 cbm³ silos with discharge screws - 2 discharge screws - 4 mixing and homogenising chambers, - 5 conveyor belts - 2 double-shaft extruders connected in parallel Ncedpfjlxzl Esx Amnst - 1 double shaft mixers - container for liquid extracts, etc.

Condition: used, Year of construction: 2006, Technical details: Nsdpfx Amepumdconjct x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm spindle: 52 kW / 430Nm total power requirement: 87 kVA weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours *

Condition: used, System: used piston diaphragm pump / pump Type: HMD-G-50-500 Flow rate: 40.0 m3/h Pressure: 1,6 MPa Nodpfxodkdi Te Amnjct

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 70 bar, total height: 1,600 mm, total width: 800 mm, total length: 1,200 mm, temperature: 40 °C, operating pressure: 70 bar, noise level: 80 dB, Equipment: documentation/manual, rotational speed infinitely variable, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, approx. 15,000 L/day Potable Water Compact, fully automated reverse osmosis system for the production of hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, as well as small-scale industrial and utility operations. Technical Specifications Type: RO 510-DT2-15S Process: Reverse osmosis with Disc-Tube (DT) technology Permeate Output: Approx. 15,000 L/day (15 m³/day, depending on operating conditions) Feed Water: Seawater with high conductivity, approx. 55,000 µS/cm (high salinity) Permeate Quality: Drinking water, approx. 500 mg/L residual minerals (reference value) Recovery Rate: Approx. 30% (typical operating range) at 55,000 µS/cm conductivity Nsdjw Uf Ihopfx Amnect Design Temperature: Approx. 25°C (Operating range: approx. −2 to 35°C) Process Technology & Configuration DT module with open feed channel – highly fouling-tolerant and fully cleanable Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) Chemical pre-treatment of feed water (acid dosing) generally not required Integrated rinsing and CIP (clean-in-place) function, PLC controlled Skid-mounted on stainless steel frame (AISI 316) High-pressure lines in stainless steel, low-pressure section in seawater-resistant plastic Pumped seawater components made from corrosion-resistant materials Operating & Energy Data Feed Water Flow: Approx. 1,000 L/h (reference value) RO Module Operating Pressure: High pressure range, designed for seawater desalination Power supply: 230 V, 50 Hz, single phase Connected load: Approx. 6 kW Control, Monitoring & Safety Local operator panel with integrated PLC control Monitoring of pressures, flows, conductivity, and operating hours Automatic shutdown in case of: - Insufficient feed pressure - Exceeding permissible operating pressure - Overpressure in permeate/concentrate lines - Exceeding defined conductivity limits (with automatic redirection to drain) Automatic “Stop & Rinse” function: Permeate flushes all seawater-contacted components on shutdown, reducing fouling during system standby Dimensions & Weight (Skid) L × W × H: Approx. 1,190 × 705 × 1,500 mm Weight: Approx. 530 kg (dry), approx. 605 kg (operating) Typical Applications Vessels, offshore platforms, ports Island and coastal supply Hotels, resorts, small industrial and utility operations Backup or peak load system for existing potable water production Additional technical documentation, photos, and information on scope of supply, pricing, and availability are available on request.

Condition: new, Year of construction: 2021, functionality: fully functional, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Ncodpfoifn N Nex Amnot Number of T-slots: 3 Distance between T-slots: 150 mm Travel axes: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear guides & speeds: Ball linear guides in X/Y axes Roller linear guide in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feedrate during milling: 0 – 10,000 mm/min Smallest increment: 0.001 mm Tool magazine (CAM-Type) / changer: Number of magazine pockets: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent pockets free: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300 liter tank and pumps External coolant around spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operator panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger at control cabinet Auto power-off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE declaration of conformity according to European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation area: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 pockets, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - Through-spindle coolant pump, 20 bar pressure, for direct-driven spindles - Includes cartridge filter - Belt-type chip conveyor including chip cart (chip discharge at front, to the left side of the machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage monitoring in the machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year of construction 2025 – NEW) - Full enclosure - Double gripper Available immediately

Condition: repair required (used), functionality: not functional, fuel type: diesel, Year of construction: 1995, operating hours: 8,700 h, Equipment: adjustable boom, cabin, Extendo, 3 backhoe buckets, converter needs repair. Nedpfxjy Ex Evo Amnect