Used Dwp 10 for sale (29,319)

Condition: good (used), Year of construction: 1996, Fuel gauge, oil pump, oil dispensing system, oil station, fuel pump, tank data recording, tank system display, oil cabinet, fresh oil pump -Manufacturer: Tecalemit, electric pump for fresh oil -Type: 1.54 80 01.4 -Volume flow: 1 to 10 l/min -Engine: Hanning 0.55 kW -Pressure vessel: volume 2.8 liters -Individual components: see photos -Number: 2x oil cabinet available -Price: per piece -Dimensions: 500/480/H250 mm -Weight: 19 kg/piece Pedpfsw A Nddjx Altjpu

Condition: used, Comprehensively tested, used stainless steel Aeromatic Fielder model GP1 VP mixer / granulator. Podpfsymaxlex Altspu Manufacturer: Aeromatic Material: Stainless Steel Capacity: 10 litres Type of Blades: Bottom entry 3-blade mixer with drive, and a side entry chopper. Also includes: Jacketed removeable bowl and local controls. Various inserts to reduce bowl capacity. Unit is mounted on mobile base.

Condition: used, Screw Compressor SCHNEIDER AM B7.5 10 – used – ----- Technical Specifications ----- Max. pressure: 10 bar Motor: 7.5 kW Ppodjy Dp Swepfx Altju Air delivery at 10 bar: 1,000 l/min Weight: 250 kg Operating hours: 6,922 h Load hours: 2,083 h Year of manufacture: 2017

Condition: new, - Exhibition machine - Ppjdpfx Aeu R S A Dsltju For continuous air demand and intermittent operation Electronic control for reliability and efficiency. Increased flexibility thanks to two compressed air tanks High-quality and expandable equipment. Smooth and quiet running. Can also be used in intermittent intermittent operation. DUO KK equipment with refrigeration dryer and fine filter as pre-filter before the refrigeration dryer Condensate conditioner for oil-water separation Automatic condensate drain. ----- Technical data ----- Tank size: 2 x 100 liters, Effective delivery volume approx. 380 liters, Maximum pressure: 10 bar, Motor: 4.0 kW, Speed: 2,880 rpm, Sound pressure level: 65 dB, Dimensions (LxWxH): 1,200 x 900 x 1,250 mm, Weight: 201 kg - new exhibition machine -

Condition: used, Year of construction: 2018, machine/vehicle number: 0-200-08-2664, Single-sided edge banding machine in left-hand configuration, feed rate continuously adjustable: 16-25 m/min, workpiece thickness: 8-60 mm, workpiece overhang: 30 mm, sliding carriage, infeed guide rail automatic, workpiece support in scissor design, infeed stop, driven top pressure with composite V-belt, kit for small parts, release agent spray device top/bottom, joint milling unit 2x3 kW with pneumatic activation control for both motors, workpiece preheating, FE-MA-TECH pre-melting unit for PU adhesive, application unit PU 65, edge magazine for solid edges, coil and strip material, coil change device with 2 holders, servo-controlled edge feed, pressure zone C with 7 rollers and automatic adjustment, wetting device for the pressure zone, cooling/lubricant spray unit top-bottom-side, trimming unit chamfer/straight PK25 2x0.8 kW with standing trimming stop, pre-milling unit BF 20 2x1.5 kW with 3-roller sensing top/bottom vertical and pneumatic adjustment, multi-milling unit MF21 2x0.55 kW with 3-roller sensing top/bottom vertical and dual-roller sensing horizontal, profile milling unit FK30/V20 with milling unit for 3 tools, automatically switchable between co- and counter-rotation, and rolling side sensing, standard milling unit SF21 1x5 kW, multi-scraper blade MN21, automatically with 3-roller sensing top/bottom, cleaning agent spray device top/bottom, glue line scraper blade FA20 with automatic adjustment and sensing, smoothing unit FA 06 top/bottom 2x0.18 kW, special unit for profile insertion, control panel Powercontrol PC 23 Powertouch, edge tracking control. Psdpszha A Ejfx Altjpu

Condition: new, axle configuration: 1 axle, Carrying capacity: 10.000 kg Tyre size on axle 1: 235/75-17.5 Tyre size on axle rear: 235/75-17.5 Psdpfx Aozhpn Dsltopu

Condition: used, Batch offer of 10 used Poolgitterbox DB according to UIC standard 435-3 Ppodpfsx Ahtbox Altju Buy your used DB gitterboxes directly from Europe's largest supplier. This steel mesh container is one of the most widely used/sold load carriers in the industry, especially in the steel industry due to its high load capacity and stackability. This mesh

Condition: refurbished (used), functionality: fully functional, load capacity: 10 kg, arm reach: 1,450 mm, controller manufacturer: ABB, controller model: IRC5, ABB IRB 1600-10/1.45 IRC5 Controller - fully refurbished and with 6 months warranty - delivered into Europe duty paid so no additional costs on top Ppjdpezcfa Tjfx Altou

Condition: used, Used Renishaw MP10 touch probe Pjdszdqdxspfx Altspu Tool holder: capto C6

Condition: excellent (used), Weiss WT-270/70/10 Temperature Testing Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: WT-270/70/10 Year of manufacture: 2006 Machine type: Temperature testing chamber / Climate testing chamber Test chamber volume: approx. 270 liters For sale is a used temperature testing chamber from the manufacturer Weiss Umwelttechnik. The unit is suitable for temperature testing, environmental simulation, material testing, electronics testing, quality assurance, as well as research and development. Technical data Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 10 K/min Temperature change rate (cooling): approx. 14.5 K/min Test chamber volume: approx. 270 liters Test chamber dimensions: approx. 580 x 750 x 615 mm (W x D x H) Housing dimensions: approx. 870 x 1775 x 1745 mm (W x D x H) Weight: approx. 835 kg Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 14 kW Rated current: 26 A Refrigerant: R404A / R23 Refrigerant quantity R404A: 6.5 kg Refrigerant quantity R23: 2.3 kg Maximum suction pressure (ND max.): 19 bar g Maximum discharge pressure (HD max.): 25 bar g Standing pressure: 17 bar g Equipment Touch panel operation Viewing window in the door Interior made of stainless steel Test chamber lighting Side openings Insert grid / Test chamber equipment as shown in the pictures Control cabinet Main switch panel RS232 interface Documentation / Operating manual Scope of delivery 1x Weiss WT-270/70/10 Temperature Testing Chamber Existing documentation / Operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Pedpfxjzgcqve Altepu Scope of delivery as shown in the pictures. Subject to changes and errors in the technical data, as well as prior sale.

Condition: excellent (used), Vötsch VC³ 0034 Climate Test Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 0034 Machine Type: Climate Test Chamber / Climate Chamber Test Chamber Volume: approx. 335 liters For sale is a used climate test chamber from Vötsch for temperature and climate testing in laboratories, research, development, and quality assurance. Technical Data Test Chamber Dimensions: approx. 580 x 765 x 750 mm (W x D x H) Housing Dimensions: approx. 875 x 1860 x 1805 mm (W x D x H) Temperature Range: -10 °C to +90 °C Humidity Range: 10 to 98 % RH Dew Point Range: +4 °C to +89.5 °C Temperature Homogeneity: ±0.5 to ±1 K Temperature Deviation: ±0.1 to ±0.5 K Heating Rate: approx. 1 K/min Cooling Rate: approx. 0.3 K/min Max. Heat Compensation: approx. 200 W Refrigerant: R404A Filling Quantity: 0.6 kg ND max.: 25 bar g HD max.: 25 bar g Power Connection: 230 V / 50 Hz Rated Power: 2.3 kW Rated Current: 10 A Protection Class: IP54 Weight: approx. 490 kg Equipment SIMPAC control system Temperature and humidity control Stainless steel test chamber Ethernet, USB, RS232, RS485/422 Test item protection function Cable glands Application Areas Ppsdpfx Aljzgb Aweteu Climate testing Temperature testing Material testing Electronics testing Quality assurance Research and development Scope of Supply Vötsch VC³ 0034 Climate Test Chamber Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures For the safety of our customers, the offered climate chambers are tested before delivery, if necessary, filled with legally compliant refrigerant, subjected to a leak test, and delivered with a documented test run. Subject to change and errors in technical data as well as prior sale.

Condition: excellent (used), We are offering a Weiss climate testing chamber. Water-cooled. Test chamber lighting: halogen bulb 24V, 50W. Data for temperature tests: Temperature range: -40°C to +180°C. Temperature deviation over time in the center of the usable space: ± 0.3 to ± 0.8 K. Temperature deviation spatially: ± 0.5 to ± 2 K. Temperature change rate: Heating: 10 K/min. Cooling: 12.5 K/min. Heat compensation at +20°C: 8000 W. Podpfx Aszgaipeltspu Heat compensation at -20°C: 3000 W. Data for climate tests: Temperature range: +10°C to +95°C. Humidity range: 10 to 98 % RH. Temperature deviation over time in the center of the usable space: ± 0.2 to ± 0.5 K. Temperature deviation spatially: ± 0.5 to ± 1 K. Humidity fluctuation over time in the center of the usable space: ± 1 to ± 3 % RH. Test chamber dimensions: height 950 mm, width 760 mm, depth 650 mm. External dimensions: height 2025 mm, width 1090 mm, depth 2480 mm. Rated voltage: 3/N/PE AC 400 V ± 10% 50 Hz. Rated current: 24 A. Rated power: 16.0 kW. Refrigerant: R452A. Weight: approx. 900 kg. Type: WK-480/40/10. For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components. 2. If necessary, new filling with legally compliant refrigerant. 3. Leak test with certificate. 4. After successful inspection, the chambers undergo a documented test run. Condition: used. Scope of delivery: (See image). (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: ready for operation (used), For sale here is a main spindle from a Fooke Endura milling machine; it is in working condition. Psdpfszhh Ipox Altepu

Condition: excellent (used), CTS TS-70/350-10/S Temperature Test Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TS-70/350-10/S Machine Type: Temperature Test Chamber / Stress Screening Test Chamber Test Chamber Volume: approx. 350 liters For sale is a used temperature test chamber from the manufacturer CTS. The system is suitable for temperature testing, stress screening, environmental simulations, material testing, quality assurance, as well as development and endurance tests. Technical Data Temperature Range: -70 °C to +180 °C Temperature Change Rate (Heating): approx. 10 K/min Temperature Change Rate (Cooling): approx. 10 K/min Test Chamber Volume: approx. 350 liters Test Chamber Dimensions: approx. 650 x 720 x 750 mm (W x D x H) Housing Dimensions: approx. 920 x 1665 x 1800 mm (W x D x H) Weight: approx. 750 kg Power Connection: 400 V 3/N / 50 Hz Power: 16.6 kW Rated Current: 25.7 A Protection Class: IP22 Refrigerant (Pre-cooling Stage): R404A, 4.0 kg Refrigerant (Cooling Stage): R23, 2.1 kg Operating Pressure: 25 bar Test Pressure: 27.5 bar Equipment Multi-touch controller with program generator Touch panel operation Viewing window in the door Interior made of stainless steel USB interface Ethernet interface RS232 interface Software temperature limiter Over-temperature test item protection Shelves / test chamber equipment as shown in the pictures Documentation and operating manual available Special Features Water-cooled design Cooling water connection required Compressed air connection required Operation only possible with connected cooling water circuit and compressed air supply Temperature testing Stress screening Environmental simulation Material testing Electronics testing Quality assurance Research and development Scope of Delivery Pjdpfx Aezf Hz Nsltspu CTS TS-70/350-10/S temperature test chamber Existing documentation Operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes and errors in the technical data as well as prior sale.

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, A laser marker that can operate anything? Indeed! This is the Wattsan UV TT, an ultraviolet marker that works with a variety of materials, including leather, ceramics, glass, rubber, wood, leather, fabric, gems, organic and electrical components. The Wattsan UV TT is suitable for QR-codes, bar-codes, data and time, and any other images. This marker can operate big workpieces; the scanning tripod can be taken off and placed on the deck. Additionally, you may alter the machine's functionality by just switching out the lenses! You can give our managers a call for additional details! Wattsan UV TT machine characteristics: Working area: from 75x75 to 300x300 mm Ppedpfjr D Ngtsx Altsu Laser power: 3/5/10/15 W Machine size: 880x420x1000 mm Packing size: 960x500x1100 mm Weight: 82 kg Laser sourse: JPT Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 20 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: like new (used), functionality: fully functional, Year of construction: 2026, container length: 10 ft, For sale: Like-new 10-foot containers 🇩🇪🚨 These containers have barely been used and are in excellent technical and visual condition, almost as good as new. Condition & Features: ✅ Wind- and waterproof ✅ Robust steel construction ✅ Smooth-running double doors with original locking system ✅ High security with heavy-duty door rods ✅ Floor is dry, clean, and highly load-bearing Technical specifications: External dimensions: 2,991 x 2,438 x 2,591 mm (L x W x H) Internal dimensions: approx. 2,831 x 2,352 x 2,390 mm (L x W x H) Volume: approx. 15.9 m³ Tare weight: approx. 1,200 - 1,330 kg We also offer 8-foot containers! Feel free to contact us! Possible uses: Storage container for tools, machinery, or materials Construction sites, businesses, or private use Gardens, courtyards, clubs, or workshops Also ideal as a base for conversions (workshops, storage, tiny house projects) Ppedpjwu Unlefx Altsu 🚚 Delivery available by arrangement! If you're interested, just get in touch – I reply quickly and reliably. 👍

Condition: good (used), Year of construction: 1998, control FANUC Pedpfx Aszhxk Ioltepu weight of the machine ca. 1,5 t dimensions of the machine ca. 1700 x 1010 mm CNC turning machine Loading magazine: LNS Tryton 112 MAIN SPINDLE - Max. bar diameter: 10 [mm] - Travel: 66 [mm] - Spindle speed: 16,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.1 [degrees] COUNTER SPINDLE - Max. bar diameter: 10 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 3.7 [kW] --> Loading magazine dimensions: Length approx. 4800 mm / 450 kg

Condition: good (used), Year of construction: 2000, control FANUC weight of the machine ca. 1,5 t dimensions of the machine ca. 1,7 x 1,0 x 2 m CNC turning machine Podozhxkuspfx Altjpu Loading magazine: LNS Tryton 112 --> Loading magazine dimensions: Length approx. 4800 mm / 450 kg

Condition: good (used), Year of construction: 1996, Lifting device, adjustable traverse, crane traverse, crane hook traverse, load traverse, heavy-duty traverse, compensating traverse, lifting device, material hoist for lifting platform, overhead crane, column jib crane, workstation crane, chain hoist Ppodpfxsy D Hpae Altou -Manufacturer: Korrmann, compensating traverse for transporting different loads -Type: TRV 10-5 -Loading capacity: 10 t -Transport dimensions: 5400/360/H840 mm -Empty weight: 580 kg

Condition: good (used), Year of construction: 1997, Lifting device, adjustable traverse, crane traverse, crane hook traverse, load traverse, heavy-duty traverse, compensating traverse, lifting device, material hoist for lifting platform, overhead crane, column jib crane, workstation crane, chain hoist Podpfey D Hk Rex Altspu -Manufacturer: LHS load handling equipment, compensating spreader beam for transporting different loads -Type: TIV 10-6 -Loading capacity: 10 t -Transport dimensions: 6030/410/H930 mm -Empty weight: 720 kg

Condition: new, Year of construction: 2017, Exhibition machine Year of manufacture: 2017 (has not yet been used in production) Psdpfx Ajkwg Szeltjpu The Compact Star is a pneumatic gluing press with 5 gluing levels. The rotary motion is provided by a pneumatic drive with safety interlocking. Each level has 4 adjustable vertical clamps with an adjustable counter bearing. Each vertical clamp is equipped with a hold-down rail. Furthermore, each level has 2 adjustable horizontal pressure bars with counter bearings. Maximum clamping dimensions: Vertical: 960 mm Horizontal: 1335 mm Material thickness: 50 mm Dimensions: Length: 2700 mm Width: 3117 mm Height: 3096 mm Availability: short notice Location: Röllbach

Condition: used, Year of construction: 2016, fuel type: diesel, Lifting capacity: 565 kg Please contact Gebrauchtgeräte Center for more information Ppedpfezhrm Nox Altju

Condition: used, machine/vehicle number: 13163, Rotor diameter: 368 mm Ppedpfx Aozhpz Rslteu Rotor width: 1000 mm Number of rotor blades: 52 Stator blades: 1 row Inlet cross-section: approx. 1000 x 1200 mm Drive motor: 37 kW

Condition: good (used), axle configuration: 1 axle, permissible axle load (axle 1): 10,000 kg, first registration: 12/2012, total length: 10,890 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 275 / 70 / R22.5, wheelbase: 7,060 mm, color: green, Year of construction: 2012, Equipment: tail-lift, Axle configuration Tyre size: 275 / 70 / R22.5 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle: Double wheels; Max. axle load: 10000 kg; Steering; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Weights Empty weight: 6.880 kg Carrying capacity: 15.120 kg GVW: 22.000 kg Functional Tail lift: Dhollandia DHLSU.40, tail lift, 2000 kg Maintenance, history and condition Number of owners: 1 Technical condition: average Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL Pjdpfx Aszg Dbieltjpu

Condition: used, This listing is for Cytiva Cellulose DE52 10kg Diethylaminoethyl Cellulose. Ppodpfxezb H E Io Altou This premium ion exchange chromatography resin provides exceptional binding capacity and clean resolution, making it ideal for protein purification and biomolecule separation Unopened with seals in tact