Used Duplo Df 915 for sale (2,583)

Condition: excellent (used), Year of construction: 2004, We are offering an exceptionally high-quality precision lathe. Within its class, this is likely the best German lathe ever built. BOEHRINGER Precision Lathe Model DUE 500 Year of manufacture: 2004, including CE certification and central lubrication Machine No.: T1022.2027-00 Gedpow Rdthsfx Admott Center height: 240 mm Swing diameter over bed: 500 mm Swing diameter over cross slide: 285 mm Center distance: approx. 1,200 mm Effective turning length: approx. 1,000 mm Bar capacity: 62 mm Spindle nose: DIN 55027 Size 6 Spindle bore: 100 mm Drive power: 11 kW Maximum torque: 2,000 Nm 24 spindle speeds: 11.2 – 2,240 rpm 60 cross feeds: 0.03 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Tailstock quill stroke: 190 mm Tailstock taper: MK 5 Machine footprint (LxW): approx. 4,000 x 1,525 mm Weight: approx. 4,300 kg Accessories: - HEIDENHAIN 3-axis digital readout - Central lubrication system - Electrically interlocked chuck guard - Coolant system - Chip protection rear panel - Röhm chuck, T 250 mm, with various jaws - Telescopic cover for lead and feed screw, support to bed - Machine lamp - Multifix C + 4 quick-change tool holders - Live center - Operating manual - Circuit diagram - Rapid traverse in longitudinal and cross slides Condition: The machine is in very good technical and visual condition. Backlash on cross slide approx. 0.3 mm, on compound slide approx. 0.15 mm Spindle nose runout approx. 0.006 mm Bed geometry: deviation approx. 0.01 mm over approx. 750 mm bed length (measured on flat guideway towards chuck using dial indicator) The following parts have been renewed: - Oil change - New hoses for central lubrication - New wipers - Key for operating lever replaced - Locking pin for interlock replaced Price is net, ex stock, loaded free of charge. Delivery by company truck can be arranged at extra cost.

Condition: excellent (used), Year of construction: 1986, Engine lathe, manufacturer VDF HEIDENREICH & HARBECK, type 540 Hamburg, year 1986. In very good original condition, equipped with a 3-axis digital readout Heidenhain POSITIP 880. Feed and rapid traverse on all 3 axes, including the top slide. Comes with coolant system, rear chip guard, and machine documentation. Chuck: 315 mm Forkardt Turning diameter: 540 mm Turning length: 1500 mm Spindle bore: 103 mm Spindle speeds: 9–1800 rpm Tool holder: Multifix C Chip protection cover Gedpfxox Hr Duo Admott For further details, see technical data sheet. Space requirement: length 3.8 m, width 2 m (with rear wall), height 2 m (with rear wall), weight approx. 3500 kg.

Condition: used, Year of construction: 1959, total height: 1,900 mm, total width: 2,200 mm, total length: 1,500 mm, Empty weight: 2.500 kg Price: On request - Year: 1959 - Documentation available: Yes Godpfx Adswniikomstt - CE certificate present: No - Serial number: 80 - Control: Conventional - Motor power: 5.0kW - Transport dimensions: 1500mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: not inspected (used), Year of construction: 1977, functionality: unexamined, machine/vehicle number: 192.6155-06, spindle bore: 62 mm, turning diameter over bed slide: 270 mm, center width: 1,150 mm, turning length: 1,000 mm, spindle speed (max.): 2,240 rpm, No minimum price – guaranteed sale to the highest bidder! This machine is being auctioned due to a business closure. Placing a bid obligates the buyer to collect the item within the specified pickup window: January 26, 2026 to January 29, 2026. TECHNICAL DETAILS Swing diameter over bed (max.): 485 mm Turning length (max.): 1,000 mm Swing diameter over cross slide (max.): 270 mm Distance between centers (max.): 1,150 mm Spindle bore diameter: 62 mm Internal taper, metric (max.): 70 mm Maximum tool shank size (W x H): 25 x 25 mm Leadscrew: 6 mm Tailstock quill taper: Morse 5 Manual quill travel (max.): 119 mm Cross-slide travel from center position (max.): 110 mm Spindle speed range: 11.2 – 2,240 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,000 x 1,600 mm Weight: 1,500 kg EQUIPMENT Tailstock Multifix quick-change tool holder 3-jaw chuck, diameter: 250 mm, Manufacturer: FORKARDT Multifix tool holder, type: BD 25140 Multifix tool holder, type: BD 25120 Gjdpfexqg Akox Admott Turning tools Steady rest (diameter approx. 150 mm) 4-jaw face plate, diameter: 450 mm

Condition: used, Year of construction: 1974, turning diameter over bed 550 mm turning diameter over slide rest 300 mm turning length 1650 mm centre height 275 mm spindle bore 82 mm spindle turning speed range 9 - 1800 U/min total power requirement 23 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 4,5 x 1,4 x 1,9 mm Lathes with: Gjdpfxjx I Sf Ie Admott - Digital readout - Rapid traverse - Multifix tool post - Includes multiple tool posts - Forkardt 3-jaw chuck F400 - Coolant system - Machine light - Centering point - Chuck guard - Chip tray - Emergency stop device - Amperage display for main spindle

Condition: good (used), Year of construction: 1977, workpiece weight 279 KG length ca. von Bett bis Lynette mm Gtodpforfd U Rjx Admet 189 € . max durchlass 369 mm

Condition: good (used), Year of construction: 1972, functionality: fully functional, machine/vehicle number: 70.1025.002302, turning diameter over cross slide: 280 mm, spindle bore: 52 mm, turning diameter: 485 mm, center height: 232 mm, center width: 360 mm, turning length: 1,600 mm, total length: 3,350 mm, total width: 1,100 mm, total height: 1,400 mm, spindle speed (max.): 2,240 rpm, spindle speed (min.): 11 rpm, overall weight: 2,500 kg, workpiece weight (max.): 500 kg, Offered for sale is a VDF 48S Boehringer lead and feed screw lathe with accessories in good condition. Manufacturer: VDF Boehringer Göppingen Model: 48S Machine no.: 70.1025.002302 Year of manufacture: approx. 1972 Gtjdpfxex Nqklo Admot Centre height: 232 mm Centre distance: 1600 mm Swing over bed: 485 mm Swing over cross slide: 280 mm Spindle bore: 52 mm Spindle speeds: 11.2 - 2240 rpm Total power requirement: 7.5 kW Machine dimensions (L x W x H): approx. 3.35 x 1.10 x 1.40 m Weight: approx. 2,500 kg

Year of construction: 1993, condition: good (used), CNC lathe cycles Fabr.VDF BOEHRINGER type: DUC 560 BJ. 1993 with SIEMENS SINUMERIK 805T control. Turning length: 1000 mm Turning diameter over plan support: 365 mm Turning diameter above bed: 570 mm Spindle speeds: 3-2500U/min spindle motor: 19KW Spindle bore: 62 mm Chuck diameter: 315 mm Forkardt Godpfx Adjd Ewaasmott Turret head with 8 POS. VDI 30 With accessories and equipment documentation.

Condition: new, NEW GRUNDFOS HIGH PRESSURE PUMP MTS 20-40 R38 DQ PIPE , 40 bar PERFORMANCE Gsderb Dndopfx Admott

Condition: good (used), Year of construction: 1980, Center height: 130 mm Swing over bed: 260 mm Swing over cross slide: 140 mm Distance between centers: 600 mm Spindle bore: 30 mm Bed width: 255 mm Spindle mount: DIN 55027 Size 5 Drehdurchmesser über Support: 140 mm (repeated, omitted for English) Spindle speed range: 35.5 - 3150 rpm Feed range, longitudinal: 0.04 – 0.4 mm/rev Feed range, cross: 0.02 – 0.2 mm/rev Metric threads: 0.2 – 18 mm Inch threads: 2 – 76 TPI Module threads: 0.4 – 13.5 module Diametral pitch threads: 2.6 - 36 pitch Tailstock taper: MT 4 Drive power: 3 kW Dimensions (L x W x H): 2140 x 850 x 1400 mm Weight: 1100 kg Accessories / Special Features: • 3-jaw wedge bar chuck FORKARDT F 160 with jaw safety, Ø 160 mm • Quick-change toolpost system “Multifix” Size B • Coolant system with chip guard • Chuck guard • Hardened bedways • Lighting • Bed stop Gsdpsxz Rfkofx Admjtt • Emergency stop switch New brake linings and gearbox newly mounted Delivery time: approx. 2-3 weeks Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Cooling water pump Make of Grundfos Type SK 4 15 / 5 2840 RPM. Flow rate 40-80 litres Godpfxec Unyde Admett Pumping height 27-18 metres

Condition: good (used), Year of construction: 1999, turning diameter over cross slide: 365 mm, spindle bore: 62 mm, turning length: 2,000 mm, turning diameter: 570 mm, Swing over bed Ø: 570mm Gjdpjxxh N Usfx Admett Swing over cross slide Ø:365mm DBC Turning Length: 2000mm Spindle bore: 62mm Spindle power: 25kW Tailstock spindle Ø: 100Ø Stroke pinole: 190mm Spindle taper: 4Mk Workpiece weight: 2500 Speeds / ranges: 2500Rpm Feed rate X-Axis: 5000mm/min. Feed rate Z-Axis: 10000mm/min. Length: 5200mm Width: 2200mm Height: 2100mm Weight: 5200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2001, operating hours: 16,001 h, functionality: fully functional, machine/vehicle number: 2022.3828-03, spindle bore: 62 mm, turning length: 1,000 mm, turning diameter: 570 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, bed width: 360 mm, total length: 4,980 mm, total width: 2,090 mm, total height: 1,980 mm, overall weight: 5,600 kg, rotational speed (min.): 3 rpm, rotational speed (max.): 2,500 rpm, three-jaw chuck diameter: 250 mm, controller manufacturer: Sinumerik 810 D, Equipment: rotational speed infinitely variable, Quick-change toolholder with Multifix size C and KM interface UT4 (with internal coolant supply) Main spindle size 8 Quill taper MK5 Gtsdex Sd Agopfx Admjt Additionally: many turning toolholders UT4 Bürener chip conveyor coolant system additional chip protection door machine lamp main spindle brake steady rest Main spindle headstock completely overhauled in 2020

Condition: used, Year of construction: 1980, VDF Wohlenberg Type:V1400 Parts . Top support : Gtedpfx Ajtttigjdmst Overall height : 600 mm Overall length : 650 mm Base plate : 350 mm X 350 mm Base plate holes diameter : 22 mm Spacing: width 240 mm lengthwise : 290 mm Tool holder mounting : 100 mm X 45 mm Thread tool holder M30 . Tailstock: Center height : 630 mm Quill diameter : 100 mm Base plate : 500 mm X 400 mm . Faceplate : Diameter 1000 mm Width : 125 mm with 3 jaws Spindle holder 250 mm 4 bores diameter 20 mm pitch circle 200 mm . Sale individually or in a package possible .

Condition: used, Year of construction: 1987, turning diameter over bed 0560 mm turning diameter over slide rest 325 mm turning length 1500 mm spindle bore 62 mm spindle turning speed range 11,2 - 2240 U/min total power requirement 9 kW weight of the machine ca. 4 t Gtjdew Ny S Djpfx Admet dimensions of the machine ca. 4 x 1,6 x 1,6 m With Multifix incl. 2 holders, chuck, rotating center and DRO.

Condition: good (used), Year of construction: 1999, functionality: fully functional, Machine new white-color in 2014 (order by SIEMENS Energy) Technical Data Working area Max. swing over bed: 570 mm Max. swing over cross slide: 365 mm Max. turning length: 1500 mm Centre height over flat bed: 280 mm Max. workpiece weight: 400 / 1000 kg Max. workpiece clamping length: 1300 mm Work spindle Spindle head DIN 55027, size 8, internal taper 70 Spindle bore: Ø 62 mm Spindle diameter in front bearing: 100 mm Spindle through-hole (depth): 200 mm Max. chuck size: Ø 315 mm Speed range: 3–2500 rpm Max. faceplate diameter: Ø 560 mm Max. faceplate speed: 700 rpm Max. torque: 1800 Nm Carriage – travel Longitudinal travel (Z-axis): 1160 mm Cross travel (X-axis): 345 mm Tooling system: Parat-3 Tool cross-section DIN 770 (h × b): 32 × 25 mm Tailstock Tailstock movement by hand Quill taper: MK5 (MT5) Quill diameter: 80 mm Quill stroke: 190 mm Accessories / special equipment CNC control: SINUMERIK 810 D Godpfx Aox Ahx Dodmott 32-bit processor, digital control ManualTurn with cycle support 10.4" colour LCD display Operating manual 094.0003.1330-00 3-jaw chuck Ø 315 mm Faceplate Ø 350 mm (up to Ø 560 for thin workpieces) Radius turning function Turret on support: size 3, Parat 4-station, manually indexable 4 × 90° Chip conveyor Bürener Maschinenfabrik Particularly suitable for: see production spectrum

Condition: good (used), Item: D-1915 Grundfos Pump PUMP, GRUNDFOS Type TP-32-120/2 Bar/C - 10/90 Q - 9.0 m3/h H - 7.1 m n 2890 min Hz 50 More information at attached photos. Gjdpfxjppxy Es Admott

Condition: excellent (used), Tailstock Gsdpfx Adsuf Rwaemjtt VDF S 450 (28549) MK 5 Center height 230 mm Pinole diameter 80 mm Base area 355 / 275 mm Transport dimension : L.630 mm W. 275 mm H.400 mm Weight 120 kg

Condition: used, Year of construction: 1990, Engine power: 2 hp Godpfx Aex Edl Ssdmstt

Condition: good (used), Year of construction: 1972, LZ Lathe Manufacturer: HEIDENREICH & HERBECK Type: 21RO Year: 1972 with Parat quick-change toolholder, 10 pieces, machine documentation, thread dial indicator, live center, 250 mm Forkardt chuck. Swing over bed: 430 mm Swing over cross slide: 255 mm Center distance: 1000 mm Turning length: 750 mm Spindle speeds: 19-2000 rpm, 5.5 kW motor Spindle bore: 56 mm Further technical data available in the data sheet Gedpfx Adst Ipi Ijmett Required space: Length 2900 mm, Width 1100 mm, Height 1300 mm, Weight approx. 1750 kg Machine documentation available. Coolant system installed, chip guard/rear panel. The machine is in good condition and can be demonstrated under power.

Condition: excellent (used), machine/vehicle number: CR8-40, Vertical multistage centrifugal pump from the Grundfos brand. Checked. Good, used condition, fully functional. Please contact us if you have any further questions. Gtsdpfx Ajqk U Tqedmjt Collection can be organized at any time. Shipping on request.

Year of construction: 1996, condition: ready for operation (used), We have spare parts for CNC lathe VDF Boehringer cm180. Following parts. Turret head price:1500,-€ Tailstock price:1000,-€ Main headstock price:3000,-€ ball screw X and Z axis price:1000,-€ Gjdpfx Aogqurbodmstt axis motors X and Z price:3000,-€ Main spindle motor price:3250,-€ Hydraulic system price:1200,-€ Chuck 250mm with clamping system Price:1800,-€

Condition: good (used), Year of construction: 1980, LZ lathe, manuf. VDF HEIDENREICH&HARBECK, Type: 21 RO, year approx. 1980 Equipped with 2-axis digital readout Heidenhain ND 730, rapid traverse in longitudinal and cross directions. Chuck: 200 mm Forkardt. Toolholder: Multifix size B with 2 toolholders. 1 fixed steady rest and 1 traveling steady. Gsdjw S Itujpfx Admett Centre height: 240 mm Centre distance: 1250 mm Spindle bore: 55 mm Spindle speeds: 19–2000 rpm, motor output 5.5 kW Dimensions (LxWxH): 3.1 m x 1.2 m x 1.3 m. Weight approx. 2000 kg. Machine in good condition.

Condition: good (used), Year of construction: 1962, Centre lathe manufacturer VDF HEIDENREICH&HARBECK type: 24 RO, year of manufacture 1962, overhauled in 1992. Equipped with 3-axis digital readout Heidenhain, 250 mm Forkardt chuck, Multifix B toolholder. Centre height: 255 mm Swing over bed: 510 mm Swing over cross slide: 270 mm Distance between centres: 1000 mm Spindle bore: 55 mm Spindle speeds: 20 - 900 rpm, Motor power: 6.5 kW The machine is in good condition, electrical diagrams available. Gtedpfxjxziuwe Admet Required floor space: Length 3 m, Depth 1.2 m, Height 1.3 m, Weight approx. 1800 kg.

Year of construction: 1990, condition: used, 2.tool turret heads make DUPLOMATIC year 90 Type:BSV-N250 8/20-110/50 Tool holder size VDI50 Tool stations 8 pockets. Center height: 125mm. Gedpfx Adsbaf Spemett Price per 1 piece.