Used Duble Spindle for sale (12,649)

Condition: used, Year of construction: 2017, x-travel 550 mm y-travel 2.000 mm Dwodpozwg Utjfx Apvob z-travel 550 mm Control Siemens number of spindles 4 Stück Pneumatics 5,5 bar weight of the machine ca. ca. 28 t The machine has undergone an extensive overhaul. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: good (used), Year of construction: 2014, Traverses X Y Z; 550 x 440 x 580mm, B axis -125/+ 65 degrees, C axis 0.001 degrees, pallet diameter 130mm, maximum diameter 350mm, maximum workpiece height 300mm, maximum workpiece weight 60Kgs number of pallets 2, spindle taper BT40, Dwsdpfx Aozzzgxepvob 60 Station ATC, spindle speed 15,000rpm, Fanuc G-Tech 31iB control, through spindle coolant

Condition: repair required (used), Year of construction: 2008, operating hours: 29,835 h, functionality: not functional, machine/vehicle number: 2337752, Equipment: chip conveyor, The CNC machine is exhibiting the following error: program execution with two tool changes. Up to that point, it ran without any problems. Then, at one point, the second tool change was not performed; instead, the error message "tool changer home position missing" appeared. Dwedpszx A Tbofx Apvsb The auxiliary function and rescue function are not working. Instead, the following error messages appear: "tool holder not open," "tool holder not closed," "tool changer home position missing." After switching on and starting up, the spindle cannot rotate (without compressed air, it can be moved slightly, but it is very difficult to move). After consulting with DMG Mori, it is possible that the pneumatic cylinder used to hold the tool holder is defective, or the spindle itself. Here are the key specifications: DMG DMC 835 V, manufactured in 2007 Main spindle: 10,000 rpm, SK 40 tool holder Working area: X 835 mm, Y 510 mm, Z 510 mm Magazine capacity: 20 tools Work table: Clamping area 1000 x 560 mm Distance between T-slots: 100 mm Load capacity (center): 800 kg (approx.) Table height from the floor: 720 mm Equipped with Heidenhain 530 Operating hours: Control on: 29,835 / Machine on: 28,258 / Program execution: 10,067 / Tool changer: 1,066 In addition, we also have a chip conveyor, as well as various tool holders and milling tools (some of which are new or like new).

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: H-64094, travel distance X-axis: 1,630 mm, travel distance Y-axis: 860 mm, travel distance Z-axis: 760 mm, controller model: Ultimax, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,630 mm Travel range, Y-axis: 860 mm Travel range, Z-axis: 760 mm Spindle speed: 10,000 rpm Working area: 1,676 x 889 mm Djdpfszx N Thex Apvswb Load capacity: 2,722 kg Max. tool diameter: 75 mm Max. tool diameter with free adjacent tool positions: 127 mm Max. tool length: max. 300 mm MACHINE DETAILS Control system: Ultimax Tool positions: 40 EQUIPMENT Spindle cooling Chip conveyor

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We offer you: Manufacturer: INDEX Type: MS40-6 C Year of construction: 2019 Control: Index control C200-SL, MS40C Double-NCU Technical data: Working spindles: Number: 6 pcs. Spindle bore: max. 40 mm Max. speed: 7,000 rpm Power (100% / 25%): 13 / 24 kW Torque (100% / 25%): 31 / 57 Nm Synchronous spindle: Number: 1 pc. Spindle bore: 40 mm Max. speed: 8,000 rpm Power (100% / 25%): 10 / 14 kW Torque (100% / 25%): 16 / 22 Nm Slide travel z: 150 mm Number of tools for back-end machining: 3 pcs. Swiveling range b: 144 ° Tool holder: Number: 12 pcs. Slide travel x: 73 mm Slide travel z: 120 mm Tool holder, cut-off and back-boring slide: Number: 1 pc. Slide travel x: 82 mm Dodpfx Aezlutmjpvjwb Number of tools for back-end machining: 3 pcs. Electrical connection data: Rated power: 85 kW Connection power: 101 kVA Rated current: 145 A Max. pre-fuse: 160 A Note: Mains voltage: 400V Note: Electrical frequency 50 Hz Technical features & accessories: - Double-NCU - Signal light 'Smartlight' with LED - Machine designed for connection to a TN network. - Coolant: Cutting oil - NC option Synchronous spindle / Multi-sided turning incl. electronic shaft - INDEX loading magazine MBL40-6/3300/Strip loader/50Hz: - Strip loader 50Hz - for bar diameter D13 - D40 - Bar length 3300 mm - with pilot drilling unit - Material storage with 700 mm support area - Profibus-DP-Master interface. - 1 set (6 pieces) reducing sleeves manufactured for bar or corner dimensions, diameter D = * mm, Inner diameter range D14 - D41 - 1 set (6 pieces) material sliders for material diameter D24mm - D32mm, consisting of: - 6 material sliders D23 - 6 rotating sleeves D23 - 1 set (6 pieces) internal clamping sleeves D23mm - for material diameter D24mm - D32mm - pilot drilling diameter D15mm - 1 set (6 pieces) external stops D23mm - for material diameter D24mm - D32mm - pre-machined - 1 set (12 pieces) reducing sleeves for material sliders. The outer diameter of the reducing sleeves corresponds to the material diameter (D13 - D40) - 1 set (6 pieces) adapter sleeves, inner diameter range D13.5 - D40.5. The inner diameter of the adapter sleeves should be bar diameter + 0.5mm. - 1 set (6 pieces) two-part guide intermediate tubes, diameter 29 mm - Assembly aid for the sleeves of the guide intermediate tubes - UNIMAG - Interface for connecting a bar loader - Part discharge via slide into spindle position 6 - Workpiece conveyor belt in spindle position 6, machine-integrated - Hainbuch TOPlus Axfix D40 for synchronous spindle - Multi-sided and thread milling device - Reduction ratio i=5:1 - Inductive encoder for reference query - Internal oil lubrication - INDEX short taper connection - without converter - Back-end machining device on slide position 6.2 for max. three boring positions for fixed tools FURTHER INFORMATION IN THE PICTURES Accessories, tools and clamping devices shown are only included in the scope of delivery if this is stated in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved!

Condition: ready for operation (used), Year of construction: 1997, operating hours: 13,465 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, table load: 1,000 kg, controller model: Heidenhain iTNC 430, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 450 mm Travel range, Z-axis: 400 mm Table load: max. 1,000 kg Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain iTNC 430 Operating voltage: 400 V Control voltage: 24 V Machine weight: approx. 6,000 kg Operating hours: 48,690 h Spindle hours: 13,465 h Dwsdpfx Apozwmx Sjvsb EQUIPMENT Tool holders SK 40 Documentation Heidenhain programming manual Machine vise Clamping jaws

Condition: used, Year of construction: 1988, Spindle swivels: Yes, -5 to 45° Height adjustment: electric Swivel adjustment: electric Stop adjustment: manual Height indicator: scale Swivel angle indicator: scale Milling stop indicator: scale Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 8000, 10000 Motor power: 6 kW Dedpfxjzq Dc Is Apvswb Motor brake: Yes, automatic Dust extraction connection: 2 x 120mm Machine length: 1,200 mm Machine width: 1400 mm Weight: 1100 kg

Condition: excellent (used), Year of construction: 2008, operating hours: 1,000 h, functionality: fully functional, feed length X-axis: 240 mm, feed length Y-axis: 180 mm, feed rate X-axis: 30 m/min, spindle diameter: 40 mm, total width: 1,900 mm, total height: 1,800 mm, total length: 5,000 mm, overall weight: 6,000 kg, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, workpiece height (max.): 180 mm, jointer table length: 2,500 mm, workpiece width (max.): 240 mm, input voltage: 380 V, table length: 2,500 mm, number of spindles: 6, input frequency: 50 Hz, table width: 240 mm, Equipment: motor brake, 240 mm width 180 mm height 6 spindles 2 lower 2 upper Left Right Electronic adjustment of width and the two upper heads. Chrome table Lower draw rollers Dwjdpfx Ajztm Huspveb Central lubrication Plate lubrication First owner 2008 model year

Condition: used, Year of construction: 1981, Second-hand machine Year of manufacture: 1981 Dwedpfxszk N Dqj Apveb Features and technical specifications: - with dual pneumatic lifting spindle - Mandrel diameter: 40 mm - with a long table length: 2500 mm - with extendable frame support - with milling stop featuring Panhans metal stop jaws and fine adjustment Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). We have used this machine in our workshop to drill wooden fence profiles. It has provided us with reliable service over the past few years. As our customer is switching to plastic profiles, we no longer have use for it. This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Further videos and technical data about this machine series can be found at the following link: ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html Dwedpeywtxbjfx Apvjb The machine's operating manual is of course still available.

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 485 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 6,000 rpm, machine/vehicle number: 1310031108, TECHNICAL DETAILS Travel range, X-axis: 7,200 mm Travel range, Y-axis: 485 mm Travel range, Z-axis: 340 mm Rapid traverse rate, all axes: max. 60 m/min Spindle speed: max. 6,000 rpm Spindle power: 5.5 kW Tool changer: Turret head Tool positions: 8 MACHINE DETAILS Compressed air supply: 7 bar Compressed air consumption: approx. 100 l/min (with spray device) Dsdpfozxngyjx Apvowb Electrical connection: 400 V, 3 ~, 50 Hz EQUIPMENT Turret tool changer with 8 tool positions

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: G0E 1075, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 12,000 rpm, controller model: Mitsubishi 64S, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 600 mm Travel in Y-axis: 400 mm Travel in Z-axis: 460 mm Spindle speed: 12,000 rpm Dwedpfx Apozx Ahxoveb Tool holder: BT40 Table size: 700 x 410 mm Maximum table load: 250 kg Number of tool magazine slots: 24 MACHINE DETAILS CNC control: Mitsubishi 64S Coolant pressure: 20 bar Dimensions & Weight Machine dimensions (L x W x H): 1,880 x 3,550 x 2,790 mm Machine weight: 4,300 kg Operating hours: The seller estimates the operating hours to be approximately 20,000 hours. EQUIPMENT Spindle cooling Chip conveyor Extraction system Electronic handwheel Renishaw measuring probe Ethernet interface Approx. 100 tool holders including cabinet

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, grinding length: 500 mm, grinding width: 250 mm, total height: 1,800 mm, total length: 2,250 mm, total width: 1,400 mm, feed rate X-axis: 25 m/min, grinding wheel diameter: 205 mm, table length: 500 mm, type of input current: three-phase, table width: 250 mm, grinding wheel width: 19 mm, spindle speed (max.): 2,900 rpm, overall weight: 1,350 kg, grinding spindle motor power: 1,500 W, rotational speed (max.): 2,900 rpm, grinding spindle speed: 2,900 rpm, power: 1.5 kW (2.04 HP), grinding wheel speed: 2,900 rpm, input voltage: 400 V, disc diameter: 205 mm, Metallkraft FSM 2550 Surface Grinder Machine Type: Surface Grinder with NC Controlled Vertical Feed Dwodpfxev Iq Sho Apvjb Year: 2018 Control: NC Control Condition: Very Good Includes NC Controlled Vertical Feed Table Enclosure Guard Electro-Magnetic Chuck Wheel Dresser Coolant Equipment Halogen Light DRO Auto-Lube Technical Specifications Grinding Wheel Diameter: 180 to 205mm Grinding Wheel Width: 19 to 13mm Grinding Wheel Bore: 31.75mm Spindle Speed: 2900rpm Table Dimensions: 500 x 250mm X Axis Travel Speed: 5-25m/min Drive Motor Power: 1.5kW Electrical Connection: 400V/3Phase/50Hz Machine Dimensions: 2250x1400x1800mm Machine Weight: 1350kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2019, functionality: fully functional, feed length X-axis: 318 mm, feed length Y-axis: 51 mm, feed length Z-axis: 584 mm, number of spindles: 2, spindle speed (max.): 4,500 rpm, spindle bore: 51 mm, Equipment: cooling unit, documentation/manual, The DS-30Y Y-axis turning center combines turning with two spindles, a Y-axis, a C-axis, and powered tooling to create a powerful “one-hit” solution for any workshop. Milling, drilling, and off-center threading can be enhanced for increased machining capabilities. It comes standard with a 12-station BMT65 turret and a synchronized C-axis for versatile 4-axis capabilities. Counter spindles support fully synchronized rotation and enable workpiece transfer during operation to reduce cycle times. Spindle | CHUCK-10"-A2-6 4.8K-20HP-A2-5-DS | CHUCK-8.3"-A2-5 LT-BMT65-12 Live Tooling 4000 rpm CONVEYOR ATP Automatic Tool Presetter PCAT Part Catcher HPC High-Pressure Coolant CABCOOL Dwsdpfxszvy D Ej Apvob NGC | 1GB, ETHERNET, WIFI, EPFDM SO, MACRO, RTAP, 8M

Condition: good (used), Year of construction: 1974, TOYOSK 01BB Fixed 12 Multi Spindle Machine Manufacturer: TOYOSK Dwodpfx Aevbcydopvjb Type: 01BB Year of manufacture: 1974 Spindle: 12 Bore: 6mm, 12 points simultaneously Feed: 100mm Speed: 2-speed (2500 / 2850rpm) Spindle diameter: 19-23 mm Table size: 350 x 450 mm Spindle speed: 2200-450 mm Power: 1.5 kW Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 231458, functionality: fully functional, travel distance X-axis: 3,700 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 370 mm, spindle speed (max.): 6,000 rpm, table load: 800 kg, Note: The auction end date has been postponed to September 16, 2026! TECHNICAL DETAILS Djdpfxjzuyrye Apvjwb Travel range, X-axis: 3,700 mm Travel range, Y-axis: 2,100 mm Travel range, Z-axis: 370 mm Rotation range, C-axis: 0–362° Swivel range, A-axis: 0–90° Travel time, C-axis (0–392°): 3 s Travel time, A-axis (0–90°): 2 s Spindle speed, electric spindle: 6,000 rpm Power, electric spindle: 16.5/56 kW Speed, X-axis: 30 m/min Speed, Y-axis: 30 m/min Speed, Z-axis: 5 m/min Dimensions, tilting table: 3,500 × 2,000 + 500 mm Load capacity: 800 kg MACHINE DETAILS Stainless steel cover for saw blade with opening for cutter: Ø 425 mm Stainless steel cover for saw blade: Ø 625 mm Total power consumption: 23 kW Water consumption for saw blade: 30 L/min Total weight: 4,800 kg EQUIPMENT Material and saw blade measuring system Vacuum system for moving the panels Camera with software for management Pneumatic tilting table Motorized rotary head (C-axis) Motorized saw blade tilt (A-axis) Stainless steel cover for saw blade with opening for cutter Stainless steel cover for saw blade

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. Djdpfozt Ai Esx Apvswb The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 4,200 mm, travel distance Y-axis: 485 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 6,000 rpm, machine/vehicle number: 1300030760, TECHNICAL DETAILS Travel range, X-axis: 4,200 mm Travel range, Y-axis: 485 mm Travel range, Z-axis: 340 mm Dwedpfxjzxngmj Apvjb Max. speed, X-axis: approx. 60 m/min Max. speed, Y-axis: 30–60 m/min Max. speed, Z-axis: 30–60 m/min Max. spindle speed: 6,000 rpm Spindle power: 5.5 kW Tool changer: 8-position turret MACHINE DETAILS Compressed air supply: 7 bar Air consumption: approx. 100 l/min with spray device Power supply: 400 V, 3~, 50 Hz

Condition: used, Technical specifications: Number of spindles: 27 Distance between the first and last drill: 832 mm Distance between the centers of individual spindles: 32 mm Drilling depth adjustment: 0-80 mm Dedpfxozvmvhj Apvjwb Number of pneumatic clamping devices: 3 Operating pressure: 6 – 8 bar Drills mounted with quick-release fittings Pneumatic spindle rotation Motor power: 1.8 kW Manufacturer: Vitap Overall dimensions Length: 1260 mm Width: 930 mm Height: 1330 mm

Condition: used, Year of construction: 2000, Spindle swivels: Yes, -45 to +45° Height adjustment: electric Swivel adjustment: electric Stop adjustment: manual Height display: digital Dodezdzbzepfx Apvswb Swivel angle display: digital Milling stop display: digital Spindle diameter: 30 mm, 40 mm Speeds: 3000, 4500, 6000, 9000 Power consumption: 5 / 6 kW Motor brake: Yes, automatic Dust extraction port: 2 x 120 mm Machine length: 2500 mm Machine width: 1400 mm Weight: 1100 kg

Condition: repair required (used), Year of construction: 1989, 6 spindles Thread cutting Dwodpfx Apev R Uqtjvob Cross drilling Thread rolling Milling attachment Many accessories Feed motor (curves) defective! with IEMCA PRA 40/32 P bar loader

Condition: used, Year of construction: 1986, Second-hand machine Year of manufacture: 1986 Features and technical specifications: Motor: 4 kW Speeds: 3,000 / 4,500 / 6,000 / 8,000 / 1,000 rpm. Spindle height adjustment via handwheel Dimensions: 1200 x 80 x 1350 mm Wooden clamping jaws Dodpfx Apozk Nw Revowb Includes Holz Her 3-roller feed unit and stand with chassis Availability: at short notice Location: Röllbach

Condition: excellent (used), CATALOG NO. 7911 TECHNICAL DATA - Number of spindles: 29 pcs - Distance between outermost spindles: 900 mm - Spindle pitch: 32 mm - Table surface: 700x1220 mm - Table height: 930 mm - Pneumatic clamps: 3 pcs - Drilling vertically, horizontally, and at an angle - Vertical/horizontal operation – pneumatic table adjustment - Pneumatic lifting of drilling head - Dimensions (L/W/H): 1400/1050/1400 mm - Weight: 744 kg ADVANTAGES – Manufactured by Italian brand SCM – For 29 drills – Not repainted Dsdpfx Aszwpaxepvswb – Very good condition – Used drilling machine Net price: 5,900 PLN Net price: 1,400 EUR at an exchange rate of 4.2 EUR (Prices may change with significant exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2002, Professional, heavy-duty version by HANG (German quality) in neat, complete condition. Highly suitable for binderies, printing shops, and print departments. ⸻ Specifications • Brand / Model: HANG 107-30 electronic • Serial number: 102553 • Year of manufacture: 2002 • Number of drilling heads: 4 pieces, individually adjustable • Electronic control, automatic drilling cycle • Power connection: 400V – 50Hz – 6A • CE certification present • Cast iron frame, extremely robust construction • Manual and automatic operation • Adjustable stops with fine adjustment • Machine is mounted on swivel casters (easily movable) ⸻ Condition • Removed from production in working order • Drill spindles and guides run smoothly • No damages, normal signs of use • Immediately ready for operation • Complete, as shown in the photos ⸻ Description The HANG 107-30 is one of the most robust paper drilling machines on the market. Heavier-duty and more professional version than the standard models, thanks to the sturdy drilling heads, automatic drilling cycle, and reliable electronic control system. Perfect for calendar production, book blocks, brochures, index tabs, and more. ⸻ Price 👉 € 3,250 net (0% VAT export possible) Dwjdpfxex A Izlo Apvjb

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,416 h, functionality: fully functional, turning diameter over cross slide: 950 mm, turning length: 4,000 mm, turning diameter: 950 mm, spindle bore: 254 mm, spindle speed (max.): 630 rpm, spindle speed (min.): 2 rpm, travel distance Z-axis: 4,000 mm, Hankook Protec 9NC Hollow Spindle Oil Country Lathe Model: Protec 9NC Control: Fanuc 21i-TB Year: 2010 Dwjdpfxszzq Sqj Apvjb Spindle Bore: 254mm Capacity: 950 x 4000mm Swing Over Cross Slide: 630mm Spindle Speeds: To 630 RPM (2 Ranges) Main Motor: 37 KW Machine With: Double 4 Jaw Manual Chucks (front or rear) Duplomatic 8 Station Turret 2 x Fixed Steadies