Used Drum Rotary Dryer for sale (7,688)

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm Hodpfx Aaexabm Ne Usi motor 230 Volt weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: new, table diameter 500 mm table load 300 horizontal kg. table load 150 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90.0 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Hsdpfx Asxabl Soa Uoi Scope of delivery: - control (integrated) - foot switch

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: Hedpfx Asxaatnja Uji - control (integrated) - foot switch

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. Hedpfsxaafqjx Aa Uei - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: used, axle configuration: 3 axles, first registration: 03/2006, total length: 9,570 mm, total width: 2,470 mm, total height: 1,500 mm, tire size: 385/65R22.5, tire condition: 50 %, color: blue, Year of construction: 2006, Equipment: ABS, Tyre size: 385/65R22.5 Rear axle 1: Tyre tread: 50%; Reduction: single reduction Rear axle 2: Tyre tread: 40%; Reduction: single reduction Rear axle 3: Tyre tread: 60%; Reduction: single reduction Unladen weight: 5,300 kg Payload: 37,700 kg Gross vehicle weight (GVW): 43,000 kg Extendable body: Yes Damages: None = Company Information = Heisterkamp Used Trucks BV does not simply sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We handle used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet current requirements, and comply with the high standards of our industry. Hodpfx Aajynuris Uji Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: - Email: - Website:

Condition: used, maximum load weight: 37,700 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 11/2005, next inspection (TÜV): 04/2026, total width: 2,470 mm, Year of construction: 2005, Listed prices are excluding BPM and apply only for export. Hodjyltl Aopfx Aa Uji

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-Drum Crusher AUTO is ideal for compacting 30 to 220 Ltr drums / barrels, but also plastic and cardboard drums can be easily reduced to their minimum of volume. In many cases this compacted material can then even be marketed again. The drum press impresses with its ease of use, safe operation and high throughput quality. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 24 Ton Machine size: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction rate: 8:1 Cycle times: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Hedpoc Spguofx Aa Uji AUTO compaction cycles Compaction head with spikes to punch the drum to drain out any residual liquids Maximum safety standards by totally enclosed chamber 30 Ltr. collection tray with tap connection Useable for 30 to 220 Ltr. steel drums, plastic drums and cardboard drums A quality product “Made in Europe” Suitable for compacting Steel drums Plastic drums Cardboard drums Fiber and paper drums Optional extras Machine colour RAL Can and filter crush insert Multi head to compact inside a 200 Ltr steel drum Drum Crusher, Drum Press, Drum Compactor, Barrel Crusher, Barrel Press, Barrel Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-Drum Crusher is ideal for compacting 30 to 220 Ltr drums / barrels, but also plastic and cardboard drums can be easily reduced to their minimum of volume. In many cases this compacted material can then even be marketed again. The drum press impresses with its ease of use, safe operation and high throughput quality. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 24 Ton Machine size: 2587 H x 1190 W x 1000 D mm Hsdpfxszdr Ts Aa Usi Machine weight: 690 kg Transport height: 1800 mm Compaction rate: 8:1 Cycle times: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB User-friendly lever control Compaction head with spikes to punch the drum to drain out any residual liquids Maximum safety standards by totally enclosed chamber 30 Ltr. collection tray with tap connection Useable for 30 to 220 Ltr. steel drums, plastic drums and cardboard drums A quality product “Made in Europe” Suitable for compacting Steel drums Plastic drums Cardboard drums Fiber and paper drums Optional extras Machine colour RAL Can and filter crush insert AUTO compaction cycles Multi head to compact inside a 200 Ltr steel drum Drum Crusher, Drum Press, Drum Compactor, Barrel Press, Barrel Compactor for Metal drums / Plastic drums

Condition: good (used), Granule dryer, granule drying plant, granule conveyor, vacuum conveyor, vacuum station Hjdpsyk S Tvefx Aa Uei -Manufacturer: Heliostat granule dryer without drying container -Type: Heliostat WFAT-8490 -Individual components: see photos -Dimensions: 1360/1340/H1910 mm -Weight: 757 kg/unit

Condition: new, table diameter 690 mm table load 0,5/0,25 t swivelling range 0 - 90 motorisch Grad turning speeds 0,2 - 2,5 U/min spindle bore 100 mm Torque 375 Nm welding current 500 Ampere connected load frequency 230 Volt weight 290 kg Dimensions (LxWxH) 800 x 750 x 750 mm Hodpfsfv Aykex Aa Uoi Welding turntable with - Footswitch - tilt motor - Speed continuously adjustable - 500 amps welding current transmission

Condition: new, table diameter 180 mm 10 Kg 5 Kg chucking diameter 65 mm turning speeds 2 - 20 stufenlos swivelling range 90 Grad tilt adjustment: manually/mechanicall manuell Hjdpei Hg Iyefx Aa Uei connected load frequency 230 V weight of the machine ca. 18 Kg dimensions of the machine ca. 300 x 300 x 300 m welding turntable with - Quick chuck 65mm - foot switch - tilting/pivoting by hand - Speed continuously adjustable

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 3510184000225, total length: 1,500 mm, sweeping width: 660 mm, empty load weight: 170 kg, fuel type: electric, construction height: 1,050 mm, drive type: Elektro, construction width: 600 mm, Scrubber Dryer Chassis Number: 3510184000225 Hodpfxsynhc Uj Aa Uji Condition: Ready for operation and fully functional Technical Condition: Good Battery Voltage: 24V Battery Year: 2023 Description: Max. runtime (hours): 4.3, Max. speed (km/h): 5.6, IP protection class: IPX4, Protection class: III, Power consumption (kW): 1.42, Brush motor (W): 2 x 400, Drive motor power (W): 200, Suction motor power (W): 420, Noise level at 1.5 m distance (dB(A) ISO 3744): 58, Theoretical/practical area coverage (m²/h): 3700/2200, Working width (mm): 660, Turning circle (cm): 200, Water delivery (l/min): 1.1/3.4, Clean/Dirty water tank (l): 85/85, Squeegee width (mm): 890, Brush/pad diameter (mm): 330/330, Brush pressure (kg): 32/52, Brush speed (rpm): 220, Number/type of brushes: 2

Condition: good (used), Machine vice base plate, clamping plate, vise plate, rotary table -Rotary table: Turntable for vise -T- Round groove: 20 mm, dimensions see photos -Degree display Hodpfoykzhvjx Aa Uei -Dimensions: 350/320/H45 mm -Weight: 20 kg

Condition: used, machine/vehicle number: 3281, - Producer Elmag Superfici - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps Hedpfsumvmkox Aa Usi - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80 / 40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Condition: used, for installation on an existing bar conveyor scope of delivery: Housing of the tube with exhaust fan and switch cabinet without cross bar conveyor - Producer Cefla - Type ECO LIGHT - Working width 1.300 mm Hjdpfx Ajvun Uysa Uei - Number of lamp from top 1 Stk. - Lamp straight to conveyor - For mercury lamps - For gallium lamps - Mirror pivoting - Total connection power 14,61 kW - Location - Voltage / HZ 400 / 50

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla high-level dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 Hedpfsv I Akvsx Aa Uei - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Condition: used, Year of construction: 2018, machine/vehicle number: 318113001, The machine has been partially overhauled and tested. Hsdex Tpx Aopfx Aa Uji - Manufacturer: Cefla - Model: UV-R3 - Year of manufacture: 2018 - Working width: 1300 mm - Workpiece height: ~ 3 - 70 mm - Number of top lamps: 3 pcs. - With rod conveyor - Rod spacing: 60 mm - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power: max. 120 W/cm - Connected load: 56 kW / 104A - Voltage, Hz: 400 / 50 - Control cabinet integrated under the machine - Feed speed adjustable: ~ 1.25 - 21.25 m/min - Length: ~ 3,500 mm - Width: ~ 2,700 mm - Height: ~ 1,600 mm - Exhaust air volume: 3,600 m³/h - Location: in stock - Voltage, Hz: 400 / 50

Condition: used, Year of construction: 2003, AVAILABLE from 08/2026 Hedpfeyifwpjx Aa Usi UV dryer, Cefla UV 2000 - Manufacturer Cefla/Sorbini - Type UV 2000 M2 / TTE2500 - Year of manufacture 2003 - Working width 1.300 mm (1.445) mm - Working height 900 + - 40 mm - Operating side right - Max. part height 70 mm - Number of tubes from above 2 pcs. - Straight tubes 2 pcs. - Suitable for mercury tubes - Suitable for gallium tubes - Tube power max. 120 W/cm - Bar transport - Length 2.500 mm - Width 2.300 mm - Height 1.500 mm - Volts, Hz 400 /50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/- 5% Images are only examples of a machine of the same design*

Condition: used, Year of construction: 1997, machine/vehicle number: 4406, 3D UV dryer Superfici Elmag 2 tubes - 3D UV-dryer Superfici & conveyer - the pictures show the machine before overhaul - Producer Superfici - Type TU166-30 + 2 UVM55 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp bevel to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location Hjdpjtz Dg Usfx Aa Uei - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Condition: used, Year of construction: 2012, - Manufacturer Venjakob - Year of construction 2012 - Working width 1.300mm - Type. Flash off dryer, VEN DRY Flash Off - Part height max. approx. 120mm - Zone1, paint calming zone with cover hood without air 3,000+300mm - Zone2, flash off zone 10,000mm - Laminar flow dryer in the opposite direction to the parts - Supply air 4,000m³/h - Exhaust air 4.000m³/h - Air volumes adjustable via flaps - Heat output approx. 65 kW - Air speed 2-5m/s - Max. Drying temperature 30°C - Heat exchanger, heating water PWW max. 90/70 degrees - Belt conveyor, length 13,800 mm Hsdpeu Edhujfx Aa Usi - Feed speed approx. 2-10m/min, Frequency converter required on site. - Volt, Hz 400 / 50 - Motor power 2.5+1.5+0.75KW - Without switch cabinet - Location, at the Blomberg warehouse

Condition: used, Year of construction: 1998, machine/vehicle number: 71257/1, - Producer Cefla/Sorbini - Type Ecolight - Year of construction 1998 - Working width 1,300 mm - working height 870 + - 20 mm - max. part height ~ 70 mm - Number of tubes from above 1 pc. - Tubes placed straight 1 pc. - Suitable for mercury tubes - Suitable for gallium tubes - Bar transport Hsdpoumvp Eofx Aa Uji - Rod pitch ~ 95 mm - Feed adjustable 5 - 25 m/min - Length 1,500 mm + 500 mm - Volt,Hz 400 /50 - Total electrical connection 12.56 kW - Voltage fluctuations max. +/- 5 %

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Operation via a Siemens panel. - Manufacturer: Venjakob - Type: VEN DRY UV 3D - Year of manufacture: 2007 - Operating side: right - Working width: 1.300mm - Max. Part height: approx. 100mm - Number of tubes: 2 pieces - Suitable for mercury and gallium tubes - 3D for edge drying - Tube power max. 120W/cm - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor - Feed rate: ~ 2.5 - 7.5m/min. Hedpfxju S N R Ej Aa Usi - Length: 3,000mm - Bretie: 2.750mm - Total connection ~45KW - Location: in stock - Volt/HZ: 400/50

Condition: used, Year of construction: 2007, UV Dryer, Cefla UV 2000 - Manufacturer: Cefla/Sorbini - Model: UV 2000 M2 / TTE2500 - Year of manufacture: 2007 - Working width: 1,300 mm (1,445 mm) - Working height: 900 +/- 40 mm - Operator side: right - Max. part height: 70 mm - Number of top lamps: 2 pcs. - Lamps, vertically aligned: 2 pcs. - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power, max.: 120 W/cm Hsdpfx Aaoxn Nlve Uoi - Conveyor type: rod transport - Length: 2,500 mm - Width: 2,300 mm - Height: 1,500 mm - Voltage, Hz: 400 V / 50 Hz - Total electrical connection: 86 A / 36.4 kW - Voltage fluctuations max.: +/- 5% Images are for reference only and show a similar machine.*

Condition: used, Year of construction: 2008, - Manufacturer Efsen/Cefla - Type Woodcure 1400 - Year of manufacture UV 2008, transport/conveyor 1998 - Working width 1,300 mm (1,445) mm - Working height 870 + - 20 mm - Max. part height 70 mm - Number of tubes from above 2 pcs. - Straight tubes 2 pcs. - Tube power 120 W/cm - Suitable for mercury tubes - Suitable for gallium tubes Hodovupdcjpfx Aa Uji - Manufacturer of transport system Cefla - With cross bar conveyor - Bar spacing 95 mm - Feed adjustable via hand wheel ~ 5-25 m/min - Installation length: 3,500 mm - Width: approx. 2,100 mm - Volts, Hz 400 /50 - Total electrical connection 38 kW - Voltage fluctuations max. +/- 5%

Condition: used, for installation on an existing bar conveyor. Includes: casing with 2 tubes, exhaust fan and control cabinet. Without conveyor Hsdpfxeumvqco Aa Uji