Used Driving for sale (21,942)

Condition: used, Flange mounting, driving flange -Chuck flange with: driving pin -Outer: Ø 250 mm -Cone diameter: 140 mm Gkjdpfx Aodvdvpoacoc -Weight: 13 kg

Condition: excellent (used), Year of construction: 2020, Brand: MELKUS Model: C4060 Year of production: 2020 Number of pieces: 10 Control: autonomous (driverless) Charging stations: 9 Units in use: 9 Spare units: 2 Load capacity: 100 kg Maximum speed: 1.5 m/s Navigation system: SLAM (Simultaneous Localization and Mapping) or camera-based guidance Dimensions (W × L × H): 40 cm × 60 cm × 21 cm Own weight: 29 kg (without accessories) Power supply: LiFePo₄ battery Gkjdpfx Aaswk Ebhecsc Battery life: up to 8 hours Charging time: automatic fast charging Safety system: 1–2 laser scanners (front / front and rear)

Condition: new, functionality: fully functional, Year of construction: 2025, color: grey-black, overall weight: 15,000 kg, maximum load weight: 12,600 kg, empty load weight: 2,400 kg, loading space width: 2,500 mm, loading space length: 6,500 mm, loading space height: 125 mm, Dear Sir or Madam, We are offering for sale a new roll-off platform from our own production. The platform has the following features: - Manufactured according to DIN 30722-1 - 50mm diameter support bracket - 1570mm hook height - 6500mm usable area length - Empty weight 2400kg / 12600kg payload - 5mm checker plate floor / 4mm front wall thickness - Solid hook support with surrounding metal sheets - IPN 180 longitudinal beams / reinforced - Outer rollers can be lubricated and replaced - Primed and painted in RAL 7016 / anthracite - C-lock according to DIN - 7 pairs of recessed lashing eyes with a tensile force of 5t each - Perforated strips on each side with 30mm holes Gsdpfowy U Euox Aacokc - 6 solid and secure inserts for leveling the lanes - 120mm deep lanes - Deepened lanes each approximately 5500mm long 708mm wide - 2 lockable steel storage pockets on the front - 2 lashing rings with a tensile force of 5t each on the inside of the front wall - 2 warning markings according to §32 (1) StVO and DIN (German Road Traffic Act) - Incl. type plate and container inspection according to DGUV Rule 114-010 (formerly BGR) - Available immediately Also available in 5.5m and 6m usable area lengths. Nationwide delivery possible for an additional charge! If you are interested in other roll-off container products, we would be delighted to hear from you!

Condition: used, mileage: 97,700 km, power: 235 kW (319.51 HP), first registration: 10/2007, overall weight: 18,000 kg, fuel type: diesel, color: red, axle configuration: 4x2, maximum load weight: 11,922 kg, empty load weight: 6,078 kg, wheelbase: 3,800 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 3, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, onboard computer, soot filter, Volvo FE320 tractor unit (ex driving school vehicle) D.O.T.: 10/ 2007 only 97.700KM with receipts Euro5 emission class Long-distance cab with 3 seats manual gearbox Climate control Spoiler package Air suspension rear axle Wheelbase 3800mm Tires 315/70 R22.5 tread approx. 70% Gkedpfx Aaovikxwjcoc Unladen weight 6.078KG the vehicle was used as a driving school vehicle and is in very good condition. export/ net price: 15.900 Euro All information without guarantee, errors excepted.

Condition: used, Year of construction: 1993, Machine: Double-sided through-feed operation with additional: 4 drilling supports vertically from above 4 drilling supports horizontally from behind Units: Tiltable Workpiece length (mm): 330 - 2500 Workpiece width (mm): 40 - 180 (200 mm for straight cuts) Workpiece thickness (mm): 15 - 80 mm Dowels (mm): 8 + 10 + 12 x 30 + 40 + 50 Dowel projection (mm): 10 - 25 Machine dimensions: Length (mm): 8040 Width (mm): 5850 Height (mm): 2500 Gkodjwbuw Tspfx Aacec

Year of construction: 1999, condition: good (used), the machine is correct, not registered, in running order Gedpfxoh If S Ej Aacjkc

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange with: driving pin -Outer diameter: 190 mm Gedpfed Hcqysx Aacokc -Camlock fastening: DIN 55029 -Cone size: 5 -Hole circle: Ø 104.8 mm -Weight: 8 kg

Condition: used, Flange mounting, driving flange -Chuck flange with: driving pin -Outer diameter: 200 mm -Short taper mount for: bayonet disc mounting DIN 55027 Gkodpsd Hcq Djfx Aacec -Cone size: 5 -Hole circle: Ø 104.8 mm -Weight: 9 kg

Condition: used, Flange mounting, driving flange Goded Hcq Rjpfx Aacekc -Chuck flange with: driving pin -Outer diameter: 250 mm -Short taper mount for: bayonet disc mounting DIN 55027 -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 17 kg

Condition: used, Flange mounting, driving flange -Chuck flange with: driving pin -Outer: Ø 325 mm -Cone diameter: 139 mm -Weight: 20 kg Godpfx Aodvdvmeacokc

Condition: used, Flange mounting, driving flange -Chuck flange with: driving pin -Outer: Ø 260 mm -Cone diameter: 106 mm -Weight: 11 kg Gksdpfsdvdvtjx Aacec

Condition: used, Flange mounting, driving flange Gkjdpfxedvdvws Aacjc -Chuck flange with: driving pin -Outer: Ø 300 mm -Short taper mount for: bayonet disc mounting, cone size 6, -Hole circle: Ø 133.4 mm -Number: 1x discs available -Price: per piece -Weight: 20 kg

Condition: used, Flange mounting, driving flange Gjdpfxsdvdv Ds Aacekc -Chuck flange with: driving pin -Outer: Ø 315 mm -Short taper mount for: bayonet mount, taper size 6, bolt circle Ø 133.4 mm -Weight: 20 kg

Condition: used, Flange mounting, driving flange Gedsd Hcq Iepfx Aacekc -Chuck flange with: driving pin -Outer diameter: 260 mm -Short taper mount for: bayonet disc mounting DIN 55027 -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 14 kg

Condition: used, mileage: 533,339 km, power: 260 kW (353.50 HP), first registration: 08/2009, fuel type: diesel, number of seats: 57, gearing type: mechanical, emission class: euro5, color: other, brakes: retarder, Year of construction: 2009, Equipment: ABS, air conditioning, disability-friendly, trailer coupling, = Other options and accessories = - Retarder - Wheelchair lift - Webasto = More information = Height: 345 cm Damage: none = Company information = Gedpfewup Dzex Aacjkc We are an international company based in Belgium, in the Brussels area (+/-20 km). Belgian Bus Sales is your ideal partner for buying and selling used buses and has an extensive parking lot that serves as an exhibition area. We always have numerous buses of all brands, capacities, models and price levels in stock. We can find the right tourist, school or regular bus for you that is tailored to your needs and budget. All information is without guarantee. Errors, prior sale and typos reserved. Opening times for viewing the used buses: Mon.-Fri.: 8:30 a.m. - 12:00 p.m., 12:30 p.m. - 5:00 p.m.

Condition: used, Electro Dual Screwdriving Unit with Automatic Feed and Pneumatic Double Stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriving unit is equipped with a pneumatic double stroke, operated via Festo valves and cylinders. Additionally, various monitoring systems are installed for full automation. Technical data: Torque of electric screwdriver: 0.6 Nm Gearbox torque: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Total pneumatic stroke: 100 mm Spring stroke for screwdriver: 20 mm Distance between both screwdriving tools: 73 mm - Equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - Requires Bosch Rexroth LT303 power module for operation (power module not included) Screwdrivers 1 and 2 are each composed of the following components: Rexroth type servo motor Rexroth type 0 planetary gearbox Rexroth type 0 encoder Rexroth type 0 straight drive output Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material no.: 0 Nominal torque: 12 Nm Reduction ratio: 1 Godpfjhxvu Ejx Aacskc Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive output Rexroth Type: 2GA82 SZ2 1/4" SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction ratio: 1 Weight: 0.2 kg Installation length: 90 mm One 7 m motor connection cable is included in the delivery. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg Good condition

Condition: excellent (used), Here we offer a screw system. Type: DS 57 MDW, DS 57 SA + PosiControl + MultiPro TA Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Written order possible by email or fax Gkodpfx Aaoqa A Uljcec

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwing technology Type: Handy-flex 200 horizontal movement: 300 mm Gkjdsfx Hxzepfx Aacjc vertical movement: 370 mm Load capacity: 10 to 14 kg Projection: 250 to 550 mm guide column vertical: Ø 25 mm Guide columns horizontal: Ø 16 mm tool holder: Ø 26 mm oval with screw clamping - Movable in three axes (horizontal, vertical, rotary) - 1 piece Balancer for vertical movement TECHNA, type 9340, adjustment range 10 to 14 kg - adjustable latch for vertical movement, manual release via Bowden cable - for weightless suspension of small appliances - Load capacity adjustable - constant attraction Space requirement L x W x H: 880 x 500 x 1120 mm Own weight: 23 kg sound condition

Condition: used, Feeding technology / feeding system / vibratory feeder / sorting unit / bowl feeder Vibratory bowl, sorting device / screw feeding with vibratory feeder for screwdriving applications Feeding system DEPRAG Type: 0622-P/0.75-1S No.: 1183884 Year: 2011 - 2012 Godpeh Ap Idofx Aacekc The unit was used for feeding contact pins for electrical connectors. Product dimensions: Ø 4 mm, length 26 mm The pins are stocked in the material hopper; the conveyor belt transfers the pins as required into the bowl feeder. The bowl feeder, equipped with two sorting tracks, delivers the pins to the product turner. The product turner orients the product to the desired position and releases it for further processing. The unit comes from a prototype system. External electrical control is not included and should be provided by a PLC. Without modification, also suitable for automatic and correctly oriented feeding of threaded studs up to M4 x 26. The unit consists of the following components: 1 pc. belt hopper / feeding conveyor DEPRAG Type: B 10 Serial no.: 1178200 Order no: 415050A Year: 2011 Filling volume: 10 liters Belt speed: 100 mm/min Operating voltage: 24 Volt (DC) - Belt surface: profiled - Foldable stainless steel chute Weight: 11 kg 1 pc. bowl feeder vibratory bowl KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter top: 200 mm Bowl diameter bottom: 100 mm Bowl internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm - Bowl feeder with two sorting tracks and two product outlets Operating voltage: 230 Volt, 50 Hz. 1 pc. DEPRAG vibratory controller for the bowl feeder Type: SZG Controller 6 Production no.: 35 pcs. FESTO product turner with 180° swivel range - 1 FESTO valve terminal CPV10-GE-MP-8 - 1 FESTO valve terminal CPV10-VI - Special pneumatic components (compressed air supply approx. 6 bar) - 2 pcs. MURR base modules type MVP12 - Complete unit mounted on a steel plate with 4 support feet Dimensions L x W x H: 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Condition: used, Feeding technology / Feeding system / Vibratory feeder / Sorting unit / Bowl feeder Vibratory bowl, sorting device / Screw feeding with vibratory feeder for screw technology Feeding system DEPRAG Type: 0611-P/0.75-1S No.: 1183885 Year: 2011 - 2012 The system was used for feeding electrical connector pins. Product dimensions: Ø 4 mm, length 39 mm The pins are preloaded in the material hopper; the feed belt conveys the pins as required into the bowl feeder. From the bowl feeder, the product is transferred via the linear feeder to the product inverter. The product inverter orients the product into the correct position and makes it available for further processing. The unit comes from a prototype system; the external electrical control unit is not present and should be replaced by a PLC. Without modification, for example, suitable for the automatic and properly oriented feeding of threaded pins up to M4 x 40. The unit consists of the following components: 1 piece belt hopper / feed conveyor DEPRAG Type: B 10 Serial no.: 1178201 Order no.: 415050A Year: 2011 Fill volume: 10 liters Belt speed: 100 mm/min. Operating voltage: 24 V (DC) - Belt surface dimpled - Foldable stainless steel chute Gkodpokpwuusfx Aacoc Weight 11 kg 1 piece bowl feeder KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter (top): 200 mm Bowl diameter (bottom): 100 mm Bowl internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the bowl feeder Type: SZG Controller 6 Serial no: 35 pieces linear feeder KENDRION Type: WS3B/36 Part no: WSB003,564025 Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the linear feeder Type: SZG Controller 6 Serial no: 35 pieces product inverter FESTO with 180° swivel range - 1 piece FESTO valve block CPV10-VI 18200 - Compressed air requirement approx. 6 bar - 1 piece MURR base module type MVP12 - Complete unit mounted on a steel plate with 4 support legs Space requirements (L x W x H): 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Condition: ready for operation (used), Year of construction: 2007, operating hours: 18,179 h, functionality: fully functional, machine/vehicle number: B151707, turning length: 620 mm, turning diameter: 190 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 345 mm, distance between spindles: 970 mm, TECHNICAL DETAILS Maximum turning diameter: 190 mm Maximum turning length: 620 mm Maximum swing diameter over bed: 190 mm Swing diameter over cross slide: 190 mm Standard turning diameter: 170 mm Maximum distance between spindles: 970 mm Axis Travel X-axis 1: 345 mm X-axis 2: 167.5 mm Y-axis: +/- 45 mm Z-axis 1: 1,240 mm Z-axis 2: 685 mm B-axis: +/- 91° C-axis 1+2: 360° Main Spindle Maximum spindle speed: 4,500 rpm Power capacity - main spindle: 18.5 / 15 kW Spindle bearing diameter: 110 mm Spindle bore: 80 mm Maximum bar capacity: 65 mm Spindle nose: A2-6 Maximum chuck diameter: 165 mm C-axis: 0.001° Sub Spindle Maximum spindle speed: 5,000 rpm Power capacity - sub spindle: 11 / 7.5 kW Spindle bearing diameter: 90 mm Spindle bore: 63 mm Maximum bar capacity: 51 mm Spindle nose: A2-5 Maximum chuck diameter: 165 mm C-axis: 0.001° Sub spindle traverse: 760 mm Upper Turret Number of tool stations: 24 Number of driven tool stations: 12 Shank diameter: 25 mm Bore shank diameter: 32 mm Indexing time: 0.2 - 0.7 s Chip-to-chip time: 3.0 s Maximum tool diameter: 80 mm B-axis: 182° Y-axis: 90 mm Lower Turret Number of tool stations: 24 Number of driven tool stations: 12 Shank diameter: 25 mm Bore shank diameter: 32 mm Indexing time: 0.2 - 0.7 s Chip-to-chip time: 3.0 s Maximum tool diameter: 80 mm Turret Tool Drive Spindle speed driven tool stations: 6,000 rpm Power capacity - driven tool stations: 5.5 / 3.7 kW Number of driven tool stations: 24 Maximum shank diameter (bolt): 25 mm / 32 mm Feeds Rapid traverse (X / Y / Z): 16 / 6 / 40 m/min Rapid traverse B-axis: 180°/s Rapid traverse C-axis: 600 rpm Feed rate X: max. 16,000 mm/min Feed rate Y: max. 6,000 mm/min Feed rate Z: max. 40,000 mm/min Creep feed: 0 - 1,260 mm/min Gjdpfsxgpclox Aacokc Feed rate C: 1 - 4,800°/min MACHINE DETAILS CNC control: Fanuc 18 iTB Weight: 12,500 kg Electrical Data Frequency: 50 Hz Voltage: AC 200/220 V Maximum load: 198/180 A Main switch: 225 A Transformer voltage: 68.6 kVA Control voltage: DC 24 V Total power consumption: 77 kVA Operating Hours Spindle hours: 18,179 h Machine hours: 53,242 h Power-on hours: 99,999 h

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, faceplate diameter: 4,000 mm, travel distance X-axis: 4,500 mm, travel distance Z-axis: 600 mm, controller model: Siemens Sinumerik 840D-sl, clamping range: 8,000 mm, year of last overhaul: 2010, No minimum price – guaranteed sale to the highest bidder! The machine was originally built in 1985 and was completely overhauled in 2010! TECHNICAL DETAILS Travel distance X-axis: 4,500 mm Travel distance Z-axis: 600 mm Faceplate diameter: 4,000 mm Clamping range: 0 – 8,000 mm/min Spindle speeds Stage 1: 0.7 – 5.6 rpm Stage 2: 2.8 – 22.4 rpm Stage 3: 2.1 – 56 rpm MACHINE DETAILS Measuring system X-axis: Absolute encoder Z-axis: Absolute encoder C-axis: ROD – 280 Heidenhain 1PH6206 75 kW Drives Drive X: Servo motor 1FT6086 Drive Z: Servo motor 1FT6086 Gkjdexfic Aopfx Aacec Control unit: Siemens Sinumerik 840D-sl Electrical data Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Main fuse: 250 A Total power consumption: 120 kW Total rated current: 200 A EQUIPMENT Chip conveyor Hydraulic unit

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 720052, turning length: 600 mm, turning diameter: 140 mm, bar passage: 65 mm, controller model: Siemens 840 D PowerLine, distance between spindles: 615 mm, TECHNICAL DETAILS Turning diameter: 140 mm Turning length: 600 mm Maximum bar diameter: 65 mm Distance between spindles: 615 mm Max. spindle speed: 5,000 rpm Main spindle drive power: 20/27 kW Spindle nose: ISO 702/1 140 mm Spindle bearing diameter: 110 mm Max. torque: 105/145 Nm C-axis: 0.001 Chuck diameter: 140 - 160 mm Tool turret: 3 Y-axes: 2 to 3 axes +/- 35 mm B-correction axes: 2 axes +/-1 Driven tool positions: 3 x 12 Tool holder: VDI 25 x 48 DIN 69880 Drive power for driven tools: 8 kW MACHINE DETAILS Control: Siemens 840 D PowerLine Dimensions & Weight Space requirements: approx. 8.0 x 3.5 x 2.5 m Machine weight: approx. 6,500 kg Electrical Data Gkedpfoxg Im Ajx Aacjc Rated voltage: 400 V AC Rated current: 101 A Rated power: 59 kW Number of phases: 3 Frequency: 50 Hz Control voltage: 24 V DC Total power requirement: 53 kVA EQUIPMENT Index MBL bar loader

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Z-axis: 700 mm, turning diameter: 140 mm, turning height: 380 mm, turning diameter over bed slide: 250 mm, TECHNICAL DETAILS Turning diameter: 140 mm Swing diameter: 250 mm Turning height: 380 mm Travel paths Travel - X axis: 300 mm Travel - Z axis: 700 mm Spindle Spindle speeds: 1 - 6,000 rpm Drive power 40% duty cycle: 38.00 kW Spindle nose: DIN 55026 - size 6 Spindle bore diameter at front bearing: 110 mm Feed & Rapid Traverse X-axis feed rate: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min X-axis feed force: 9,000 N Z-axis feed rate: 1 - 40,000 mm/min Z-axis rapid traverse: 40.00 m/min Z-axis feed force: 10,000 N Tools Number of tools in turret 1: 11 Number of tools in turret 2: 11 Toolholder: VDI 40 MACHINE DETAILS Godpoxf A Npofx Aacjkc Control: SINUMERIK 840D Total power requirement: 70.00 kW Machine weight: approx. 22.00 t Space requirements: approx. 5.80 x 8.60 x H3.80 m EQUIPMENT Chip conveyor Extraction unit Infeed and outfeed Reversing gripper

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 4,000 rpm, turning diameter over bed slide: 640 mm, counter spindle torque (max.): 5,000 Nm, Turning and Milling Center with Main and Counter Spindle and Comprehensive Equipment! TECHNICAL DETAILS Turning diameter: 640 mm Turning length: 1,185 mm Swing diameter: 640 mm Distance between headstocks: 1,500 mm SLIDE I X-Axis travel: 550 mm Y-Axis travel: 180 mm Z-Axis travel: 1,185 mm B-Axis: 240° Feed rate X-axis: 0 – 40,000 mm/min Feed rate Y-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 70,000 mm/min Feed rate B-axis: 1 – 20 rpm Rapid traverse X/Y/Z: 40 / 24 / 70 m/min Feed force X/Y/Z S6: 7.00 / 11.00 / 7.50 kN Tool interface: HSK 63 Milling spindle speed: 10 – 12,000 rpm Drive power 100% duty cycle: 13.20 kW Drive power 40% duty cycle: 22.00 kW Milling spindle torque: 60 / 100 Nm Max. tool length: 350 / 200 mm Tool diameter: 80 mm Tool diameter with 2 free pockets: 120 mm Max. tool weight: 6 / 10 kg SLIDE II X-Axis travel: 180 mm Z-Axis travel: 1,050 mm Feed rate X-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse X + Z axes: 24 / 36 m/min Feed force Z / X S6: 11.00 / 9.00 kN Turret (positions): 12 Tool holder: DIN 69880 Ø40 Driven tool positions: 12 Speed: 1 – 4,000 rpm Drive power 100% duty cycle: 10.70 kW Torque S1: 32 Nm SLIDE III Z-Axis travel: 1,150 mm Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse Z-axis: 36 m/min Gkedoxf A Edspfx Aacsc Feed force Z-axis S6: 13.00 Nm MAIN SPINDLE Model: ISM90 Speed: 10 – 4,000 rpm Drive power 100% duty cycle: 36.00 kW Drive power 40% duty cycle: 45.00 kW Torque at 40% / 100% duty cycle: 800 / 630 Nm Spindle bore: 80 mm COUNTER SPINDLE Speed: 10 – 5,000 rpm Drive power 100% duty cycle: 21.00 kW Drive power 40% duty cycle: 28.00 kW Torque at 40% / 100% duty cycle: 320 / 240 Nm Spindle bore: 80 mm MACHINE DETAILS Electrical Data Total power requirement: 70.00 kW Dimensions & Weight Machine weight: approx. 20.00 t Footprint: approx. 8.50 x 4.50 x H3.10 m Control Control manufacturer: Siemens Control model: SINUMERIK 840D EQUIPMENT Chip conveyor Oil mist separator DMG Automation WH10top Main spindle ISM90: Hollow chuck, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter spindle ISM76: Partial hollow chuck, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-off unit with integrated conveyor belt Automatic safety cover Differential pressure clamping With pump stand for coolant: Pump 1: 17 l/min at 80 bar / Pump 2: 20 l/min at 8 bar / Pump 3: 40 l/min at 20 bar Hainbuch collet chuck including collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 workpiece pick-off for turret