Used Down Stroke Dare for sale (10,521)

Condition: used, Year of construction: 1985, pressure 40 t distance between columns 495 mm stroke 150 mm distance table/ram, max. stroke up, adjustment up 300 mm table surface area 490 x 400 mm hole in the table 50 mm table height over floor 950 mm side window 155 mm ram surface 150 mm speed down 200 mm/s Gsdpfx Aozrptbjcgjui speed up 200 mm/s working speed 20 mm/s oil volume 115 l power requirement 5,5 kW weight 2,2 t dimensions (WxDxH) 1,35 x 1,1 x 2,2 m with oil-hydraulic drive, upper and lower stroke limitation, mechanical depth stop, two-hand and foot operation

Condition: ready for operation (used), Year of construction: 1998, overall weight: 8,600 kg, This 6-axis TRUMPF TrumaBend V85S press brake was manufactured in 1998. It features a bending length of 2,550 mm, an 850 kN bending force, and a 6-axis back gauge. The Delem 65 CNC control enhances precision, while the electro-hydraulic twin cylinder drive ensures robust performance. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85S machine we have for sale. Contact us for more information about this machine. Additional equipment • Extended Installation Height and Stroke: Additional 150 mm each • 2nd Foot Switch Machine Benefits Technical Machine Benefits • Drive type: electro-hydraulic twin cylinder with independent y1/y2 movement • Power requirements: 11 kw / 415 v / 50 hz • Design: down-stroking with dual cylinder electro-hydraulic ram drive via proportional valves • Inclination of beam (y1/y2): +10 mm • Bending force: 850 kn // gap between columns: 2260 mm // throat depth: 410 mm // stroke length: 215 mm // open height: 385 mm • Bed width: 120 mm • Ram measurement: incremental with deflection compensation • Tool holders: self-centering top tool holder, hardened bottom tool holder • Hydraulic tool clamping: hydraulic clamping for both top and bottom tools • Safety features: safety screens, light barriers, single/double break modes // front support brackets: two quick-adjustable brackets Extra Information Back Gauge: CNC-controlled ‘X’ and ‘R’ axis back gauge with safe 2-finger adjustment Guedpfx Aozuxkhscgei X-axis Back Gauge Travel: 600 mm Maximum X Distance: 860 mm R-axis Vertical Travel: 250 mm Back Gauge Travel Speed: 500 mm/sec R-axis Speed: 300 mm/sec Z1/Z2 Axis: CNC-controlled, asymmetric finger adjustment Working Speeds: Approach Speed: 200 mm/sec Operation Speed: 1–10 mm/sec Return Speed: 135 mm/sec Technical Specification Bending Length 2550 mm

Condition: good (used), Year of construction: 1990, Power: 1.000 kN Size of bolster: 800 x 750 mm Distance betw. columns: 900mm Size of ram: 800 x 600mm Daylight: max. 800 mm Stroke: 480 mm Speed: Fast down: 300 mm/s Working: 30 mm/s Fast up: 300 mm/s Electric power total: app. 31 kW Weight: app. 13.000 kg Size of footprint: app. 1,6 x 2,90 x 3,8m (T x B x H) • die cushion, activ, 400kN, stroke 200mm Gusdpfsz Atv Isx Acgoi • allowed for 2-hand working • equipped by oil - air chiller • ram guiding by 4 pc. hard chromed Guiding columns

Condition: used, Hydr. guillotine shears SAFAN type VS 310 / 4 Gusdpfjumpq Nox Acgoi Machine. No. B7140 Year of construction 1984 Cutting length 3100 mm Cutting thickness 4 mm Back gauge 900 mm, accuracy +/- 0.5 mm Angle fence front left 2100 mm Hydraulic tank capacity approx. 120 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz - Motorized back gauge with positioning control and digital position display - Single stroke and continuous stroke with adjustable stroke pause - Cutting angle adjustment - Manual cutting gap adjustment - stepless cutting length adjustment - Cutting line lighting - 17 Hydraulic sheet hold-down device - Angle stop left with scale 2100 mm - 2 material support arms 1600 mm - 2 material support arms 615 mm - Electric foot switch - Fixed finger guard in front of the hold-down devices Space requirement without sheet supports L x W x H 3850 x 2300 x 1680 mm Machine depth with sheet supports 3900 mm Weight 5.7 tons good condition

Condition: good (used), BYSTRONIC HYDRAULIC BENDING MACHINE 3100X150 TON, MAX STROKE 315 mm, RAPID STROKE DOWN 190 mm/s, WORKING CYCLE 10 mm/s, RAPID STROKE UP 150 mm/s, DIMENSIONS: 415X200X290cm (h) WEIGHT 11,000 KG Y1 Y2: hydraulic cylinder axes. X forward and backward axis of the register. R upward and downward axis of the register. Z1 and Z2 axes of the movement to the right and left of the stops. X1 or relative X which is the axis of the movement forward and backward of a single stop. Gsdevxipgopfx Acgoui 7 axes. The control also manages the hydraulic crowning, which can be considered the eighth axis.

Condition: used, Year of construction: 1985, machine/vehicle number: ARP-250, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, stroke length: 125 mm, total length: 2,500 mm, total width: 3,000 mm, total height: 4,500 mm, overall weight: 25,000 kg, Single-column (C-frame) eccentric press Ivo Lola Ribar ARP-250, 2,500 kN, for sale. The press has been completely overhauled, is regularly maintained, is in very good mechanical and functional condition, and is ready for immediate operation. Inspection under power is possible by appointment. Technical data (as per nameplate): Nominal force: 2,500 kN (250 t) Stroke: 40–190 mm, adjustable Ram adjustment: 125 mm Strokes per minute: 40 min⁻¹ Max. sheet thickness: 24 mm Distance table–ram (stroke down): 300–425 mm at 190 mm stroke, 375–500 mm at 40 mm stroke Year of manufacture: 1985 Equipment: Hydraulic die cushion Pneumatic clutch-brake T-slot table Central lubrication Air tank with service unit Separate electrical cabinet with control Dimensions and connection (approx.): Table size: approx. 1,380 x 880 mm Ram face: approx. 1,200 x 800 mm Table height above floor: approx. 800 mm Drive power: approx. 22 kW Power supply: 400 V, 3-phase AC, 50 Hz Weight: approx. 24 t Dimensions (L x W x H): approx. 2.5 x 3.0 x 4.5 m Location: Slovenia Delivery terms: EXW Price: EUR 22,000 net Godpfx Acj Af Na Asgsui

Condition: used, Year of construction: 1991, functionality: fully functional, conveyor belt width: 500 mm, pressing force: 400 t, DGUV certified until: 07/2027, year of last overhaul: 2017, sheet thickness steel (max.): 7 mm, Edelhoff DARRW 2/400 – 400-ton pressing system with ALBA strip feeding system For sale is a complete mechanical pressing system, manufactured by Gebr. Edelhoff, type DARRW 2/400, manufactured in 06/1991, with an ALBA strip feeding system, coil unwinder, straightening unit, roller feeder, modernized Siemens SIMATIC control system, UNIDOR process monitoring, and MFP Z-conveyor, manufactured in 2025. The system is installed and can be inspected and demonstrated after prior appointment. Technical data of the press: Manufacturer: Gebr. Edelhoff Werkzeugmaschinenfabrik Type: DARRW 2/400 Year of manufacture: 06/1991 Machine No.: 9131 Design: mechanical twin-column stamping press Pressing force: 400 Mp / approx. 4,000 kN Table size: 1,100 × 1,500 mm Stroke adjustment: 40–120 mm Ram adjustment: 120 mm Stroke rate: 20–80 strokes/min Motor power: 45 kW Electrical system: 380 V Control system / process monitoring The machine control system has been modernized. Equipment includes: Siemens SIMATIC control system UNIDOR process/pressing force monitoring with visualization Screen-based operation Separate main control panel Additional machine-side control panel Integration of the strip feeding system into the system control Extensive switching and control technology ALBA strip feeding system Complete strip feeding system with several ALBA components, consisting of: Coil unwinder Coil holder with spreading mandrel Hold-down / guide arms ALBA straightening unit ALBA roller feeder Separate control unit for the strip feeding system Technical data of the strip processing: Strip width: max. 500 mm Material thickness: max. 7 mm Material cross-section: max. 1,800 mm² Strip speed: up to 25 m/min 2 transport rollers 8 straightening rollers Year of manufacture of ALBA components: 1991 The strip feeding system consists of several ALBA units with separate nameplates. Part removal MFP Z-conveyor Year of manufacture: 2025 Automatic part discharge from the pressing area Modernization / overhaul The pressing system underwent extensive overhaul in the years 2017–2019. The documented costs for the overhaul amounted to approximately €92,000. In addition, the system was equipped with an MFP Z-conveyor, manufactured in 2025. Inspection The press was last inspected on 07.07.2026 according to DGUV Information 209-030. Condition / Inspection The complete system is currently installed at the production site. Inspection and demonstration under production conditions are possible after prior appointment. Dismantling, relocation, and reinstallation Upon request, in addition to the machine sale, we offer the complete technical handling of the relocation: Professional dismantling of the system Preparation for loading and transport Relocation to the new production site Reinstallation and assembly at the destination Further services according to individual agreement The scope of services can be individually agreed upon and offered according to the buyer's requirements. Financing Gujdozv Ukgopfx Acgji If the buyer has sufficient creditworthiness, a financing solution can be offered or arranged for the acquisition of the system. Details, term, and conditions will be determined after individual assessment and agreement. Further technical documents and information are available upon request. Technical data provided to the best of our knowledge and according to the available machine documentation or nameplates. Subject to errors and prior sale.

Year of construction: 2005, condition: used, Working length: 3100mm, pressing force: 2500kN, max. stroke: 465mm, rapid down speed: 190mm/s, working speed: 10mm/s, rapid return speed: 150mm/s, machine weight: 18t. Machine control retrofitted to Cybelec approx. 5 years ago. Safety control completely renewed in July 2026, new Siemens components installed in the control cabinet. Inspection possible by arrangement. Gusdpszun T Sjfx Acgsi

Year of construction: 2021, condition: ready for operation (used), overall weight: 9,300 kg, total width: 2,200 mm, total height: 2,130 mm, cutting length (max.): 3,080 mm, product length (max.): 3,920 mm, Hydraulic shearing machine manufactured in 2021. This KNUTH KHT H 3010 NC features a working length of 3080 mm and a throat depth of 150 mm. It includes a Cybelec Touch 8 control for optimal positioning of cutting gap, angle, and length. The robust backgauge and standard blades are suitable for stainless steel. If you are looking to get high-quality shearing capabilities, consider the KNUTH KHT H 3010 NC machine we have for sale. Contact us for further details. • Control: Cybelec Touch 8 (touchscreen) • Features: • Guided cutter bar with adjustable cutting angle for minimal twisting • Automatic optimization of cutting gap, cutting angle, and cutting length • Controlled backgauge with preloaded ball screw • Controlled kerf (cutting gap) adjustment • Controlled cutting angle adjustment • Blades/knife suitable for stainless steel • Robust, precise backgauge • Working area: • Working length: 3080 mm (maximum cutting length 3080 mm) • Throat depth: 150 mm • Cutting angle: 0.3°–2° • Strokes per minute: 17 H/min • Hold-down: 16 positions, 20 t capacity • Table size: 3340 mm x 520 mm x 875 mm • Backgauge: Gusdezgfhwepfx Acgsi • Rear stop: 1000 mm • X-axis feed speed: 6000 mm/min • Front support arms: • Quantity: 3 • Length: 900 mm each • Cutting capacities: • 10 mm at 450 N/mm² • 6 mm at 700 N/mm² • Drive: • Main motor: 22 kW • Hydraulic tank: 350 l

Year of construction: 1993, condition: good (used), machine/vehicle number: 479, Offer 22408 Gsdpfepxmxcjx Acgsui Technical data: - max working width 3050 mm - max cutting capacity St 40 10 mm - throat 270 mm - cutting angle ° - cutting gap adjustment by hand - number of hydraulic hold-downs 16 pcs - motorized backgauge 20 - 650 mm - front angle fence + support arms - number of strokes depending on cutting angle and cutting length 7 - 12 per/min - hydraulic drive 400 V / 22 kW - table height approx. 820 mm - Space requirement incl. backgauge, without front support arms - approx. W 3850 x H 2000 x D 2000 mm - weight approx. 8500 kg - with: - E-foot - switch - cutting line lighting

Condition: used, Year of construction: 1969, grinding length 500 mm grinding width 200 mm workpiece height 250 mm total power requirement 5,5 kW weight of the machine ca. 2500 kg dimensions of the machine ca. m J U N G Horizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082 _____ Grinding length max. 500 mm Grinding width max. 200 mm Table size 600 x 200 mm Grinding height under grinding wheel approx. 250 mm Table cross travel approx.. 230 mm Table slide cross stroke 0,2 - 8 mm/table stroke Table longitudinal travel max.. 550 mm Table speed longitudinal 1 – 20 m/min. Measurement of grinding wheel 225 x 25 x 51 mm Grinding wheel speed infinitely adjustable 1.000 - 4.500 rpm Vertical feed 0.001 - 0.01 mm/stroke Grinding spindle drive infinitely variable load 0,4 – 1,5 kW Total electrical load 5,5 kW - 380 V – 50 cycles Weight approx. 2.500 kg Accessories/Special Features: • Due to the infinitely variable speed range of the grinding wheel this design is especially suited for grinding of high alloyed steels and carbide, hardmetal, etc. • Set up switches for plunge-in or normal pendular-grinding with automatic infeed • Automatic infeed of grinding slide during surface- and/or profile grinding, (plunge-in cut)with automatic stop of infeed by contact-Gauge. • motorized rapid feed of grinding head up/down • Manual straight grinding wheel-dressing device mounted above the grinding wheel • Manual Table mounted, swivable magnetic chuck make BRAILLON size 400 x 200 mm Gsdpfx Ast Hwziscgjui • separate converter cabinet for infinitely variable speed regulation and with respective display of cutting speed in m/sec. • Wet grinding facility including coolant tank and bandfilter cleaning device, separate standing, • Including 3 separate flanges, some grinding wheels, service tools, etc. Condition : good – can be inspected here under power, partially reconditioned by a JUNG Specialist (table pistons, lubrication, infeed system, Dresser, covers, etc.) Delivery : ex stock – as inspected Payment : net– after completion of contract

Condition: like new (used), functionality: fully functional, overall weight: 200 kg, Year of construction: 2000, pressing force: 2 t, throat depth: 150 mm, Hydraulic Press Atsugi Model AP-2-M Used Load Range: 5-20 (kN) Stroke (mm): 150 Down Speed: 60 (mm/s) Up Speed ​​73.8 (mm/s) Working Area Open Height: 250mm Open Depth: 150mm Table Size: 450x320mm Motor Specification 3 Phase AC200V 4P 1.5KW Gjdpfxovbdyfe Acgeui Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/6L Total Weight (kg) 200 Body Size ​ Height (mm) 987 Width (mm) 505 Depth (mm) 735

Condition: used, Year of construction: 1987, pressure 160 t chamfer lenght 4000 mm distance between columns 3060 mm control FORTRON CNC 10 H 4 throat 280 mm stroke 250 mm dayligth 500 mm table length 4050 mm table width 280 mm Gujdpfx Astqqr Rocgji feed down 70 mm/sec feed up 68,4 mm/sec working feed 9 / 3,5 mm/sec operating pressure max. 205 bar oil volume 400 l total power requirement 19,5 kW weight of the machine ca. 20,8 t Total weight including accessories 22 t dimensions of machine L x W x H 4,8 x 1,88 x 2,93 m dimensions of switch cabinet 1,6 x 0,5 x 2,25 m - 3-axis machine - Acc.: programmable back gauge, upper and lower dies, table extensions

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, working width: 4,060 mm, stroke length: 300 mm, throat depth: 1,000 mm, distance between stands: 4,200 mm, operating speed: 90 mm/s, table height: 1,000 mm, back gauge travel distance R-axis: 150 mm, overall weight: 17,000 kg, total length: 5,300 mm, total width: 1,950 mm, total height: 3,000 mm, warranty duration: 6 months, pressing force: 200 t, Equipment: safety light barrier, SAFANDARLEY E-Brake press brakes have an electric drive. Lenze servomotors controlled by inverters from the same company allow for fast and reliable operation of the system. Additionally, the machine consumes electricity mainly when the slider goes down. Gusdpfx Acovpqpiegoi The slider returns using the force resulting from the spring package on both sides of the machine. When the machine is not in use, it does not consume electricity because there is no pump in the system as in hydraulic presses. Electricity consumption is estimated at 70% lower than in conventional hydraulic presses. Servo-electric press brake SAFANDARLEY model E-Brake Pressure 3000 kN (300 tons) Slider stroke 300 mm Opening Q=690 mm Upper beam exit speed 90 mm/s Upper beam accuracy +/- 0.01 mm CNC controlled axes: Y1-Y2 - upper beam control with the possibility of using skews X - bumper beam exit (gives the dimension of the bent element). Very high positioning accuracy. delta X - independent bumper finger used for skewing R - bumper beam top/bottom, stroke 200mm Z1-Z2 - bumper fingers sliding along the bending line (speed 2000mm/s) Max bumper finger speed 350mm/s Max bumper finger range (third reference point range in X axis) 1000mm R axis bumper range 200mm Connected power 22kW (controlled by inverter) Weight 17,000kg Machine width 5,300 mm Machine depth 1,950 mm Machine height 2,810 mm Power supply 3/N/PE 50Hz – 400/230V Servo-electric drive (without hydraulic system) Drive transmission by means of belts

Condition: used, Year of construction: 1952, Type of machine: Down-stroking press Manufacturer: SACK&KIESSELBACH Model: EP500 Year of construction: Guodpfxowxw H Ej Acgoi 1952 Pressing force: 500 t Clear gap: 450 mm Location: In Germany

Condition: new, Bernardo Hydraulic guillotine shear HSB 2000 x 4 Cutting length 2000 mm Max. sheet thickness * 4 mm Cutting angle 1° 30' Motorized backgauge 0 - 600 mm Strokes / min 12 Number of hold-down devices 8 pcs. Table height 760 mm Support arms 3 pcs. Oil tank 100 liters Motor power 4.0 kW Length 2700 mm Depth 2600 mm Height 1600 mm Weight approx. 3015 kg * Material strength 400 N/mm² Scope of delivery: - Cutting gap adjustment - Cutting line lighting - Motorized NC backgauge - Front sheet supports - Lateral stop Guodpeqpfrmjfx Acgsi - Angle stop - Protective plate with photocells - E21S control unit - Foot pedal with emergency stop - Tool steel blade

Condition: new, pressing force: 400 t, pressure:400 t distance between columns:3400 mm stroke:500 mm total power requirement:55 kW weight of the machine ca.:49 t draw back pressure:26 t pump capacity:131 Lt./min dimensions:7.900 x 5.500 x 4.300 mm Gjdpfx Ajfhcc Rjcgoui :5000 mm :2800 mm table height over floor:700 mm distance between table / ram:1000 mm :700 l traversing speed:0-33 mm/sec. down speed:0-10 mm/sec :0-25 mm/sec.

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Gedpfomck Ryox Acgsui Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Year of construction: 2024, condition: new, Manufacturer: DURMA Model: MS 3004 Year of manufacture: 2024 Cutting length: 3100 mm Sheet thickness: 4 mm Control system: EZM9910 Operating hours: 0 Cutting angle: 1°30 Strokes per minute: 42 Motor power: 7.5 kW Rear gauge range: 750 mm Table width: 450 mm Table height: 800 mm Dimensions L/W/H: 3700x2300x1350 mm Weight: 3780 kg Standard equipment Guedpfx Aod R Emfecgei Control unit EZM9910 Rear gauge range 750 mm, programmable via control unit Plastic inserts for the hold-down device 1 side gauge and 2 sheet support arms Finger guard Portable foot switch with emergency stop Spring-loaded flap stop in the T-slot of the support arms Ball screw Ikh7877 Table plates with ball rollers Upper blade with 2 cutting edges Lower blade with 4 cutting edges CE marking Extended equipment Adjustable angle stop 0-180° The machine can be inspected and demonstrated at any time in our demonstration center in Staufenberg, by prior appointment. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will gladly provide you with further information.

Condition: used, machine/vehicle number: 074583, hydraulic outriggers for loading cranes stroke 500 mm solid design with duct via square tube can be telescoped mechanically with bolts 300 mm - grid 100 mm outside square tube 100 x 100 mm folding up device for support cylinders - can also be dismantled supports can be folded down at approx. 60 ° construction height in retracted condition 1,000 mm with folding up device Gjdpsh N D Uvofx Acgjui with integrated counter-balance valve support plate can be removed - dimensions 320 x 250 mm weight 80 kg / unit *- new - unused -* *- 2 units on stock - price per unit -*      

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by Gedpfxezu Aibj Acgsui limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: used, Year of construction: 1998, pressure 315 t stroke 500 mm throat 425 mm dayligth 1000 mm table surface area 1200 x 815 mm table height over floor 800 mm ram surface 1100 x 700 mm feed down 48 mm/s feed up 330 mm/s working feed 19 mm/s Gujdpfx Acozrppvogsi oil volume 1600 l power requirement 82,0 kW Weight 23,0 t dimensions of the machine ca. 2,4 x 2,8 x 4,0 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard at front (Sick), two-hand operation

Condition: good (used), Year of construction: 2003, machine/vehicle number: A 10371, Offer 25448 Technical Data: - Max. working width: 3050 mm - Max. cutting capacity (St 40): 0.5 – 6 mm - Cutting angle adjustable (motorized): 0.5 – 3° - Blade gap adjustment: manual Gedpfx Asx I I Uxocgoui - Number of hydraulic hold-downs: 18 pcs - Motorized backgauge with SP8 positioning control: 10 – 750 mm - Strokes per minute (depending on cutting angle and length): 9 – 17 strokes/min - Hydraulic drive: 400 V / 7.5 kW - Table height: 770 mm - Space requirement incl. backgauge, w/o front support arms: approx. W 3750 x H 1600 x D 2450 mm - Weight: approx. 4500 kg Includes: - Electric foot switch - Cutting line illumination - Angle gauge - 2 support arms - Rear area protection with side guard and light curtain

Condition: good (used), Year of construction: 1990, machine/vehicle number: 5211, Offer 24289 Technical data: - max. cutting width 3060 mm - max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1.50 ° - Cutting gap - adjustment via adjusting screws - Number of hold-down devices 15 pcs - Stroke rate 23 to 43 /min - Front angle stop Gusdpfx Acst Ucgaogsi - Motorized backgauge position-controlled 15 - 850 mm - Cutting line lighting - E - foot switch - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t

Condition: new, Year of construction: 2024, feed under pressure 2,7 mm/sec pressure 100 t stroke 400 mm table surface area 920 x 560 mm feed down 4,25 mm/sec feed up 8,22 mm/sec oil pressure max. in the work cylinder 385 bar oil volume 26 l diameter of piston 125 mm column daylight 920 mm Gedpfx Ajvcrm Aecgjui voltage 400 V/ 50 Hz total power requirement 4 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,7 x 0,9 x 2,1 m • unused workshop press, (Demonstration machine) • manual and hydraulical operation, • pressure cylinder horizontally moveable, • table can be hydraulically adjusted in height, • Cylinder Ø 175 mm, piston base Ø 125 mm.