Used Down Stroke Dare for sale (10,521)

Condition: used, Year of construction: 1991, functionality: fully functional, conveyor belt width: 500 mm, pressing force: 400 t, DGUV certified until: 07/2027, year of last overhaul: 2017, sheet thickness steel (max.): 7 mm, Edelhoff DARRW 2/400 – 400-ton pressing system with ALBA strip feeding system For sale is a complete mechanical pressing system, manufactured by Gebr. Edelhoff, type DARRW 2/400, manufactured in 06/1991, with an ALBA strip feeding system, coil unwinder, straightening unit, roller feeder, modernized Siemens SIMATIC control system, UNIDOR process monitoring, and MFP Z-conveyor, manufactured in 2025. The system is installed and can be inspected and demonstrated after prior appointment. Technical data of the press: Manufacturer: Gebr. Edelhoff Werkzeugmaschinenfabrik Type: DARRW 2/400 Year of manufacture: 06/1991 Machine No.: 9131 Design: mechanical twin-column stamping press Pressing force: 400 Mp / approx. 4,000 kN Table size: 1,100 × 1,500 mm Stroke adjustment: 40–120 mm Ram adjustment: 120 mm Stroke rate: 20–80 strokes/min Motor power: 45 kW Electrical system: 380 V Control system / process monitoring The machine control system has been modernized. Equipment includes: Siemens SIMATIC control system UNIDOR process/pressing force monitoring with visualization Screen-based operation Separate main control panel Additional machine-side control panel Integration of the strip feeding system into the system control Extensive switching and control technology ALBA strip feeding system Complete strip feeding system with several ALBA components, consisting of: Coil unwinder Coil holder with spreading mandrel Hold-down / guide arms ALBA straightening unit ALBA roller feeder Separate control unit for the strip feeding system Technical data of the strip processing: Strip width: max. 500 mm Material thickness: max. 7 mm Material cross-section: max. 1,800 mm² Strip speed: up to 25 m/min 2 transport rollers 8 straightening rollers Year of manufacture of ALBA components: 1991 The strip feeding system consists of several ALBA units with separate nameplates. Part removal MFP Z-conveyor Year of manufacture: 2025 Automatic part discharge from the pressing area Modernization / overhaul The pressing system underwent extensive overhaul in the years 2017–2019. The documented costs for the overhaul amounted to approximately €92,000. Guodszv Ukgepfx Acgji In addition, the system was equipped with an MFP Z-conveyor, manufactured in 2025. Inspection The press was last inspected on 07.07.2026 according to DGUV Information 209-030. Condition / Inspection The complete system is currently installed at the production site. Inspection and demonstration under production conditions are possible after prior appointment. Dismantling, relocation, and reinstallation Upon request, in addition to the machine sale, we offer the complete technical handling of the relocation: Professional dismantling of the system Preparation for loading and transport Relocation to the new production site Reinstallation and assembly at the destination Further services according to individual agreement The scope of services can be individually agreed upon and offered according to the buyer's requirements. Financing If the buyer has sufficient creditworthiness, a financing solution can be offered or arranged for the acquisition of the system. Details, term, and conditions will be determined after individual assessment and agreement. Further technical documents and information are available upon request. Technical data provided to the best of our knowledge and according to the available machine documentation or nameplates. Subject to errors and prior sale.

Year of construction: 2005, condition: used, Working length: 3100mm, pressing force: 2500kN, max. stroke: 465mm, rapid down speed: 190mm/s, working speed: 10mm/s, rapid return speed: 150mm/s, machine weight: 18t. Machine control retrofitted to Cybelec approx. 5 years ago. Safety control completely renewed in July 2026, new Siemens components installed in the control cabinet. Inspection possible by arrangement. Guodpfxozun T So Acgji

Year of construction: 1989, condition: ready for operation (used), Capacity: 12mm at 3010mm sheet width, cutting length: 3050mm, max. pressure: 200bar, min./max. cutting angle: 0.5°-3°, number of hold-downs: 18, max. stroke rate: 21strokes/min, squaring arm length: 1000mm, back gauge: 1000mm, working height: 900mm. Dimensions X/Y/Z: approx. 3800mm/1850mm/2030mm, weight: approx. 9000kg. Documentation available. Inspection possible by appointment. Gujdpfezukrqex Acgji

Year of construction: 2021, condition: ready for operation (used), overall weight: 9,300 kg, total width: 2,200 mm, total height: 2,130 mm, cutting length (max.): 3,080 mm, product length (max.): 3,920 mm, Hydraulic shearing machine manufactured in 2021. This KNUTH KHT H 3010 NC features a working length of 3080 mm and a throat depth of 150 mm. It includes a Cybelec Touch 8 control for optimal positioning of cutting gap, angle, and length. The robust backgauge and standard blades are suitable for stainless steel. If you are looking to get high-quality shearing capabilities, consider the KNUTH KHT H 3010 NC machine we have for sale. Contact us for further details. • Control: Cybelec Touch 8 (touchscreen) • Features: • Guided cutter bar with adjustable cutting angle for minimal twisting • Automatic optimization of cutting gap, cutting angle, and cutting length • Controlled backgauge with preloaded ball screw • Controlled kerf (cutting gap) adjustment • Controlled cutting angle adjustment • Blades/knife suitable for stainless steel • Robust, precise backgauge • Working area: • Working length: 3080 mm (maximum cutting length 3080 mm) • Throat depth: 150 mm • Cutting angle: 0.3°–2° • Strokes per minute: 17 H/min • Hold-down: 16 positions, 20 t capacity • Table size: 3340 mm x 520 mm x 875 mm • Backgauge: • Rear stop: 1000 mm • X-axis feed speed: 6000 mm/min • Front support arms: • Quantity: 3 • Length: 900 mm each • Cutting capacities: • 10 mm at 450 N/mm² Gedpfx Acozgfhwogjui • 6 mm at 700 N/mm² • Drive: • Main motor: 22 kW • Hydraulic tank: 350 l

Condition: as good as new (ex-display), functionality: fully functional, Surface grinder. Taiwanese machinein new condition. IT has been a demonstration machine, has run a few hours. Standard accessories: Grinding wheel Wheel flange Flange extractor Wheel balancing arbor Wheel balancing base Wheel dresser with diamond Leveling screw & plates Tool box & tools Manual Optional accessories: 3 HP Spindle motor (siemen brand) instead of 2 HP Longitudinal by sensor & solenoid valve Electro magnetic chuck, 150 x 450 mm (Fine pole) Coolant system (Capacity 52L, 1/8 HP) Auto crossing stroke adjustment Crisscross grinding Power rapid up/down system (AC motor, 1/5 HP) Wheel flange (extra) Back water splash shield Gusdsm Tv U Tjpfx Acgoi Led lamp instead of halogen lamp Spindle motor inverter 3 HP (Taiwan made) Digital readout (lu, cross: 300 mm + vertical: 450 mm; 2 axes monitor) Auto. demagnetizer for chuck 5A If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Year of construction: 1993, condition: good (used), machine/vehicle number: 479, Offer 22408 Technical data: - max working width 3050 mm - max cutting capacity St 40 10 mm - throat 270 mm - cutting angle ° - cutting gap adjustment by hand - number of hydraulic hold-downs 16 pcs - motorized backgauge 20 - 650 mm - front angle fence + support arms Guedpfx Aopxmxcocgei - number of strokes depending on cutting angle and cutting length 7 - 12 per/min - hydraulic drive 400 V / 22 kW - table height approx. 820 mm - Space requirement incl. backgauge, without front support arms - approx. W 3850 x H 2000 x D 2000 mm - weight approx. 8500 kg - with: - E-foot - switch - cutting line lighting

Condition: new, pressure: 60stroke: 250total power requirements: 4weight approx.: 800messurements (LxWxH): 1.710 x 700 x 2.100Technical DataPress force: 60 tons Motor power: 4 kW Stroke: 250 mm Clear distance between columns: 1,040 mm Piston Ø: 180 x 120 mm Feed speed: 8 mm/s Working speed: 4 mm/s Godpfed Ab Iqjx Acgjui Return speed: 10 mm/s Length: 1,710 mm Width: 700 mm Height: 2,100 mm Weight: 800 kg EquipmentSteel welded construction Any stop position Pressure gauge Safety valve against overload 2 V-prisms Height-adjustable table Table up/down device Control with operating lever Manual right/left cylinder movement Equipment according to CE regulations, operating manual in German and English

Condition: used, Year of construction: 1969, grinding length 500 mm grinding width 200 mm workpiece height 250 mm total power requirement 5,5 kW weight of the machine ca. 2500 kg dimensions of the machine ca. m J U N G Horizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082 _____ Grinding length max. 500 mm Grinding width max. 200 mm Table size 600 x 200 mm Grinding height under grinding wheel approx. 250 mm Table cross travel approx.. 230 mm Table slide cross stroke 0,2 - 8 mm/table stroke Table longitudinal travel max.. 550 mm Table speed longitudinal 1 – 20 m/min. Measurement of grinding wheel 225 x 25 x 51 mm Grinding wheel speed infinitely adjustable 1.000 - 4.500 rpm Vertical feed 0.001 - 0.01 mm/stroke Grinding spindle drive infinitely variable load 0,4 – 1,5 kW Total electrical load 5,5 kW - 380 V – 50 cycles Weight approx. 2.500 kg Accessories/Special Features: Godpst Hwziefx Acgeui • Due to the infinitely variable speed range of the grinding wheel this design is especially suited for grinding of high alloyed steels and carbide, hardmetal, etc. • Set up switches for plunge-in or normal pendular-grinding with automatic infeed • Automatic infeed of grinding slide during surface- and/or profile grinding, (plunge-in cut)with automatic stop of infeed by contact-Gauge. • motorized rapid feed of grinding head up/down • Manual straight grinding wheel-dressing device mounted above the grinding wheel • Manual Table mounted, swivable magnetic chuck make BRAILLON size 400 x 200 mm • separate converter cabinet for infinitely variable speed regulation and with respective display of cutting speed in m/sec. • Wet grinding facility including coolant tank and bandfilter cleaning device, separate standing, • Including 3 separate flanges, some grinding wheels, service tools, etc. Condition : good – can be inspected here under power, partially reconditioned by a JUNG Specialist (table pistons, lubrication, infeed system, Dresser, covers, etc.) Delivery : ex stock – as inspected Payment : net– after completion of contract

Condition: used, sheet thickness: 6motor: 10messurements (LxWxH): 3750 x 1600 x 2450sheet length: 3050weight approx.: 4800 Description: Hydraulic Shearing Machine ATLANTIC ATS 3000 Used Machine - Sheet width: 3050 mm - Sheet thickness: 6.0 mm - Sheet thickness for stainless steel: 4.0 mm - Cutting angle: 0.5 - 3.0° - Hold-downs: 18 pieces - Stroke rate: 9 / 14 strokes/min - Rear gauge - adjustable: max. 750 mm - Control: Conventional - Motor power: 10.0 kW - Weight: 4800 kg - Dimensions L-W-H: 3750 x 1600 x 2450 mm - Condition: Well-maintained Features: - Electro-hydraulic / cam-guided sheet metal shear - Front control panel, left side - easy to operate - With electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the rear - Electro-motorized rear gauge 10-750 mm - With analog position indicator + handwheel for fine adjustment - 1x robust side stop - 1x movable footswitch - Front finger/entry guard - 2x emergency stop buttons at the front Guedpfou Uwyyex Acgji

Condition: like new (used), functionality: fully functional, overall weight: 200 kg, Year of construction: 2000, pressing force: 2 t, throat depth: 150 mm, Hydraulic Press Atsugi Model AP-2-M Used Load Range: 5-20 (kN) Stroke (mm): 150 Down Speed: 60 (mm/s) Up Speed ​​73.8 (mm/s) Gedpfxovbdyfo Acgoui Working Area Open Height: 250mm Open Depth: 150mm Table Size: 450x320mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/6L Total Weight (kg) 200 Body Size ​ Height (mm) 987 Width (mm) 505 Depth (mm) 735

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, TECHNICAL FEATURES: Press Model: T25-VE Year of construction: 1996 Nominal force: kN 250 Free passage between the uprights mm: 220 Distance between the axis of the connecting rod and the uprights (notch) mm: 160 Dimensions of the mallet mm: 250x130 Worktable dimensions mm: 500x310 Minimum distance between worktable and mace with high adjustment and mallet all the way down mm: 275 Mace adjustment mm: 50 Adjustable stroke mm: 0÷60 Shank hole diameter mm: 40 No. strokes per minute: 155 Engine power KW: 1.5 Gsdpfx Acottwfyjgjui Total mass Kg: 950 Operating voltage V: 380 Frequency Hz: 50 Dimensions mm: H=1890; L=1000; D=980 Lubrication pump motor power Kw: 0.09 Complete with user manual and CE compliance Warranty six (6) months excluding electronic parts. NEW COMPONENTS INSTALLED: - Front and side safety guards with safety keys; - Motor bearings; - Tang locks; - Flywheel bearings; - Flywheel belts; - Work surface brightened on CNC machine

Condition: used, Year of construction: 1987, pressure 160 t chamfer lenght 4000 mm distance between columns 3060 mm control FORTRON CNC 10 H 4 throat 280 mm stroke 250 mm dayligth 500 mm table length 4050 mm table width 280 mm feed down 70 mm/sec feed up 68,4 mm/sec working feed 9 / 3,5 mm/sec Gjdstqqr Rjpfx Acgsui operating pressure max. 205 bar oil volume 400 l total power requirement 19,5 kW weight of the machine ca. 20,8 t Total weight including accessories 22 t dimensions of machine L x W x H 4,8 x 1,88 x 2,93 m dimensions of switch cabinet 1,6 x 0,5 x 2,25 m - 3-axis machine - Acc.: programmable back gauge, upper and lower dies, table extensions

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, working width: 4,060 mm, stroke length: 300 mm, throat depth: 1,000 mm, distance between stands: 4,200 mm, operating speed: 90 mm/s, table height: 1,000 mm, back gauge travel distance R-axis: 150 mm, overall weight: 17,000 kg, total length: 5,300 mm, total width: 1,950 mm, total height: 3,000 mm, warranty duration: 6 months, pressing force: 200 t, Equipment: safety light barrier, SAFANDARLEY E-Brake press brakes have an electric drive. Lenze servomotors controlled by inverters from the same company allow for fast and reliable operation of the system. Additionally, the machine consumes electricity mainly when the slider goes down. The slider returns using the force resulting from the spring package on both sides of the machine. When the machine is not in use, it does not consume electricity because there is no pump in the system as in hydraulic presses. Electricity consumption is estimated at 70% lower than in conventional hydraulic presses. Servo-electric press brake SAFANDARLEY model E-Brake Pressure 3000 kN (300 tons) Slider stroke 300 mm Opening Q=690 mm Upper beam exit speed 90 mm/s Upper beam accuracy +/- 0.01 mm CNC controlled axes: Y1-Y2 - upper beam control with the possibility of using skews X - bumper beam exit (gives the dimension of the bent element). Very high positioning accuracy. delta X - independent bumper finger used for skewing R - bumper beam top/bottom, stroke 200mm Z1-Z2 - bumper fingers sliding along the bending line (speed 2000mm/s) Max bumper finger speed 350mm/s Max bumper finger range (third reference point range in X axis) 1000mm R axis bumper range 200mm Connected power 22kW (controlled by inverter) Gedpfsvpqpiex Acgjui Weight 17,000kg Machine width 5,300 mm Machine depth 1,950 mm Machine height 2,810 mm Power supply 3/N/PE 50Hz – 400/230V Servo-electric drive (without hydraulic system) Drive transmission by means of belts

Condition: used, Year of construction: 1952, Type of machine: Down-stroking press Manufacturer: SACK&KIESSELBACH Model: EP500 Year of construction: 1952 Pressing force: 500 t Clear gap: Gedewxw H Ejpfx Acgjui 450 mm Location: In Germany

Condition: used, Year of construction: 1980, functionality: fully functional, Spindle press from Hiller & Lutz Year of manufacture: 1980 Fully functional In good used condition. Price reduced!!!!! Technical data on Gemini-Google: The Hiller & Lutz HP71 is a classic, robust manual spindle press (often also referred to as a piercing press), which is primarily used in locksmith shops, workshops, and the metalworking industry for tasks such as straightening, bending, pressing, or punching. Here are the common technical specifications for this model: Technical details (approximate values) Since these machines were manufactured over decades, details may vary slightly depending on the year of manufacture: Pressing force: approx. 20 to 25 tons (The designation "71" often refers to the size/frame width; the force results from the spindle pitch and the flywheel diameter). Spindle diameter: approx. 70 – 80 mm Stroke: approx. 200 – 300 mm (depending on the spindle length) Overhang: approx. 250 – 300 mm (distance from the center of the spindle to the stand) Table area: approx. 500 x 400 mm Through-height: max. approx. 400 – 500 mm (with the spindle rotated upwards) Flywheel diameter: approx. 1,000 – 1,200 mm Machine features Construction: Solid cast iron frame in C-shape for high rigidity. Drive: Manual, via the large flywheel; the energy is generated by the inertia of the wheel when the spindle is screwed down. Table: Usually equipped with a central through-hole and T-slots for tool attachment. Weight: The weight typically ranges between 700 kg and 950 kg, which guarantees a stable position (usually requiring bolted mounting to the foundation). Gujdpfx Acowxyn Eogei Gemini says The dimensions of the Hiller & Lutz HP71 depend heavily on whether you are considering only the body or the total space required, including the flywheel overhang. Here are the specific dimensions for this model: Machine base dimensions (body) Height: approx. 1,800 mm to 2,100 mm (depending on the spindle position). Width (stand): approx. 500 – 600 mm. Depth (foot): approx. 800 – 1,000 mm.

Condition: new, Bernardo Hydraulic guillotine shear HSB 2000 x 4 Cutting length 2000 mm Max. sheet thickness * 4 mm Cutting angle 1° 30' Motorized backgauge 0 - 600 mm Strokes / min 12 Number of hold-down devices 8 pcs. Table height 760 mm Support arms 3 pcs. Oil tank 100 liters Motor power 4.0 kW Length 2700 mm Depth 2600 mm Height 1600 mm Gusdpfeqpfrmex Acgsi Weight approx. 3015 kg * Material strength 400 N/mm² Scope of delivery: - Cutting gap adjustment - Cutting line lighting - Motorized NC backgauge - Front sheet supports - Lateral stop - Angle stop - Protective plate with photocells - E21S control unit - Foot pedal with emergency stop - Tool steel blade

Condition: new, pressing force: 400 t, pressure:400 t distance between columns:3400 mm stroke:500 mm total power requirement:55 kW weight of the machine ca.:49 t draw back pressure:26 t pump capacity:131 Lt./min dimensions:7.900 x 5.500 x 4.300 mm :5000 mm :2800 mm table height over floor:700 mm distance between table / ram:1000 mm :700 l traversing speed:0-33 mm/sec. Gjdsfhcc Rjpfx Acgjui down speed:0-10 mm/sec :0-25 mm/sec.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. For every piece of steel you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new steel stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • High-flow, high-capacity, no leaks coolant and drainage system. • Automated servo positioning of the saw mitre angle up to ±45° (optional)• Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 7.5 m Godpfjmdq Thsx Acgjui Linear Unit: ProfiStop Alpha Material Length: 6180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Guodpfx Ajmck Ryjcgji Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: new, Year of construction: 2025, Bending machine press brake from Prod-Masz with side cutouts for bending from top to bottom. Thanks to him, you can finish your windowsill. In the machine construction there is a space of 6 cm up and down for curved processing. It is a modern sheet metal bending machine that bends sheet metal from three sides. Folding bench RED PLUS 2200 / 0.8 incl. foot control and transport wheels Technical specifications: - maximum working width: 2200 mm - Bending performance: up to 0.8 mm (sheet steel) - All non-ferrous metals 30% more bending power - Bending angle: max. 145 degrees - the cut with the roller shears across the entire working width - Bending beam thickness: 15 mm - lifting the top beam in three positions - Upper cheek stroke: 80 mm Degree scale Angle stop rear frame for holding the sheet front depth stops - Weight: approx. 230 kg The roller shears (max. Cutting capacity 0.8 mm / steel) + 350 Euro The machine complies with the CE guidelines and has a 12-month guarantee. Transport wheels incl. Gsdpfx Aocntm Aocgjui We are looking forward to your contact!

Year of construction: 2024, condition: new, Manufacturer: DURMA Model: MS 3004 Year of manufacture: 2024 Cutting length: 3100 mm Sheet thickness: 4 mm Control system: EZM9910 Operating hours: 0 Cutting angle: 1°30 Strokes per minute: 42 Motor power: 7.5 kW Rear gauge range: 750 mm Table width: 450 mm Table height: 800 mm Dimensions L/W/H: 3700x2300x1350 mm Weight: 3780 kg Standard equipment Control unit EZM9910 Rear gauge range 750 mm, programmable via control unit Plastic inserts for the hold-down device 1 side gauge and 2 sheet support arms Finger guard Portable foot switch with emergency stop Spring-loaded flap stop in the T-slot of the support arms Gedpfx Acsd R Emfjgjui Ball screw Ikh7877 Table plates with ball rollers Upper blade with 2 cutting edges Lower blade with 4 cutting edges CE marking Extended equipment Adjustable angle stop 0-180° The machine can be inspected and demonstrated at any time in our demonstration center in Staufenberg, by prior appointment. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will gladly provide you with further information.

Condition: used, pressure 10 t Godpfx Acsd R Szuegsui stroke 400 mm feed down 200 mm/sec feed up 450 mm/sec max. distance table - ram 630 mm total power requirement 8,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. m

Condition: new, sheet length: 4100sheet thickness: 13,0total power requirements: 30weight approx.: 15500messurements (LxWxH): 4120x2240x2235 Our strong brand KK Kletzer                    TAFELSCHER Vibration cut version Model SWT has everything you need for cutting.  We have also raised the standard in the vibration cutting design and deliver ours as well  Plate shears with automatic cutting adjustment via the touchscreens Control ELGO P40T without surcharge.  NC slotted table shears KKI Technological advantages Fast and precise cuts Stable,  durable frame construction Automatic kerf adjustment Easy handling Low maintenance costs High safety standard Use of components from well-known manufacturers Low unit costs   Technical specifications:  Sheet thickness: 13 mm  Cutting length: 4,100 mm Cutting angle: 2.3 °  number of hold-downs 19  Backgauge: 1,000 mm via CNC  Motor power: 30 kW  Strokes per minute 8  Projection: 50 mm  Length: 5120 mm  Width: 2240 mm  Height: 2235 mm  Godpod Tm Rcofx Acgjui Weight: 15500 kg  • Stable swing cut design Cutting gap adjustment via the control - backgauge - kerf - Cutting length  • Ball screws for the back gauge • balls in the table  • Side stop 1,500 mm • 2 pcs. Support arms 1.000 mm  • Cut line lighting • Foldable up to 1,000 mm finger protection  Option:  pneumatic sheet support, EURO 4.900, -  We have many references!

Condition: used, machine/vehicle number: 074583, hydraulic outriggers for loading cranes stroke 500 mm solid design with duct via square tube Guodpsh N D Uvsfx Acgsi can be telescoped mechanically with bolts 300 mm - grid 100 mm outside square tube 100 x 100 mm folding up device for support cylinders - can also be dismantled supports can be folded down at approx. 60 ° construction height in retracted condition 1,000 mm with folding up device with integrated counter-balance valve support plate can be removed - dimensions 320 x 250 mm weight 80 kg / unit *- new - unused -* *- 2 units on stock - price per unit -*      

Condition: new, Year of construction: 2026, Three-axis CNC-controlled hydraulic press brake with servo drives + manual crowning system Axis - Y - (press beam up and down) Godpfxjzhi Udo Acgoui Axis - X - (back gauge - forward and backward) Axis - R - (back gauge rail - up and down) Maximum pressing force 3000 kN (= bending 16 mm steel sheet S235jr over the entire bending length in a V-die with a width of 140 mm = inside radius 16 mm) Maximum bending length 2,500 mm Distance between side columns 1,700 mm Overhang in the side columns 400 mm Press beam stroke 300 mm Maximum possible installation height 520 mm Press beam travel speeds downwards 80 / 10 mm/sec - upwards 70 mm/sec Table width 400 mm Adjustment range of the back gauge forward and backward 550 mm – up and down 200 mm, oil tank capacity 250 liters Dimensions approximately 3.3 x 2.3 m x height 3.1 m Drive power hydraulic motor 22 kW Weight approximately 16,000 kg We also supply other model sizes.