Used Double Rack Press for sale (39,499)

Condition: used, Year of construction: 1999, Pressure 400 t stroke 800 mm Hjdpfx Aasv Sva Se Ejg distance between columns 2820 mm Side window 950 x 1100 mm distance table/ram (stroke up) 1600 mm table surface area 2800 x 1200 mm die cushion capacity in table 150 t die cushion stroke in table 200 mm die cushion area in table 2000 x 800 mm table height over floor 650 mm ram surface 2800 x 1200 mm speed down 420 mm/s speed up 300 mm/s working speed 17,5 - 29,5 mm/s oil volume 2500 l power requirement 75,0 + 22,0 kW Weight 50,0 t dimensions (WxDxH) 4,1 x 2,8 x 7,2 m height over floor 6,15 m permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, hydraulic ram interlocking, two-hand and four-hand operation

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Post-travel: max. 10 mm Motor power: 3 kW Hjdpfx Aaexr Ay Us Eog

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 900daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 103 Lt./min (REXROTH - Axialkolbenpumpe)motor: 22 kw - 1500d / minmessurements (LxWxH): 2000x3200x4300weight approx.: 10.000oil filling: 700 Capacity: 250 tons (at 245 BAR) Operation : Via key switch Manual / set-up mode using two hands without light sensor Automatic via two-hand operation at full speed with light sensor Main cylinder: Ø 350 mm Auxiliary cylinder: 2 pcs. Ø 80 x 60 mm Motor: 22 kW. – 45 hp. Pump: 103 lt./min REXROTH - axial piston pump Speed: Forward 120mm Pressure 13-4mm return 170mm./sec. Clear width: 1100 mm Hjdpfsgta Rcsx Aa Esg Table top: 1000x1000 mm/ with T-slots Ram plate: 1000 x 1000 mm./ with T-slots & spring welds Installation height: 600 mm (max. distance between table & ram plate) Stroke length: 400mm max Table height: 900 mm floor to table top edge Hydraulics: Block & Valves ( REXROTH ) (Hydraulic Accessory on Top of Press) priming valve Hydraulic & mechanical ram protection Pressure setting via PLC (min. pressure 35 ton) Speed setting via PLC. Pressure hold valve for 600 sec. Air cooler (temperature control adjustable via screen) Automatic lubrication for guides (adjustable via screen) Side of the working area closed with sheet metal wall Guide rails for parallelism Auxiliary engine: 5.5 kW+ 2.2 kW Auxiliary pump: 22cc.+5.5cc Safety rails around the hydraulics and side ladder Oil tank: 800 liters Oil quantity: approx. 700 liters Control: SIEMENS S7 - 1200 main switch box Giftable control panel Soft starter for engine Safety PLC: Sick PLC screen 9'' Siemens Two hand operation (movable) Ruler measuring stick for setting the stroke length 450 mm. - NOVOTECHNOLOGY Light sensor for the front and back of the work area - SICK 900 + 150mm. SECOME & Ethernet connection for remote maintenance - Siemens Working space lighting 2 compartment 8 free inputs and outputs on the PLC Automatic print refill if lost Operating instructions in German hydraulic plans control plans

Condition: as good as new (ex-display), Year of construction: 2022, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Hodpfjph Uk Njx Aa Eeg Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: used, Technical details: pressure: 63 t throat: 315 mm ram adjustment: 60 mm adjustment of stroke: 70 mm ram stroke: 10 - 105 mm no. of strokes: 71 - 140 Hub/min strokes per minute: Einzelhub: 45 / 50 Hub/min. passage between the side columns: 355 mm dayligth: 335 mm table:: BxT: 800 x 630 mm passage opening in table: 400 x 130 mm clamping plate: BxT: 616 x 85 mm clamping surface ram: BxT: 450 x 280 mm mortise hole in ram: Ø 50 x 83mm mm total power requirement: 7,5 kW weight of the machine ca.: 5,9 t dimensions electric cabinet LxWxH: 0,86 x 0,30 x 1.3 m dimension machine xH: Presse: 1,42 x 1,8 x 2,6 m Press with roll feed/strip system and straightener High-performance press with roll feed/strip system and straightening machine Application: suitable for series production Equipped with servo roll feed MINI: refurbished until 01/2021 -manufacturer P/A GmbH, type SRF 220 -for strip width 220mm -feed rate 150m/min. -operation with hand tool straightening system: -manufacturer Wanzke, type KS 150 -insertion width max. 200mm -2 pieces driven inserting rolls -4 pieces driven straightening rolls (top), adjustable vertical approx. 30mm -5 pieces driven straightening rolls (bottom), fixed, not adjustable Coil = special design: -mechanical/manual -external take-up max. Ø 1.500mm -internal take-up max. Ø 300mm -width max. 200mm Roller deposit: -roller system with 9 pieces of roller bars with 53 rollers (Ø 25x25mm). Hedpfsvt Nvpex Aa Eeg *

Condition: good (used), Year of construction: 2001, Kaiser Press V 160 WR Press force 1,600 kN Stroke adjustment 20 - 105 mm Ram adjustment 90 mm Strokes per minute 20 - 120 spm Press table 1,400 x 1,000 mm Drive power 22 kW Machine weight 24,000 kg Lorenz strip feeding line Hsdpfxsxt Ex Aj Aa Ejg Strip width up to 300 mm Load capacity 3,000 kg

Condition: used, Year of construction: 1983, pressure 500 t distance between columns 2240 mm Hjdpfx Aaovuk Tle Eog stroke 1180 mm distance table/ram, max. stroke up, adjustment up 1800 mm table surface area 2050 x 1800 mm pressure of drawing cushion in table 250 t stroke of drawing cushion in table 380 mm drawing cushion surface in table 1800 x 1200 mm pressure of drawing cushion in ram 122 t stroke of drawing cushion in ram 200 mm drawing cushion area in ram 1800 x 1200 mm ram surface 2215 x 1800 mm table height over floor 500 mm speed down 400 mm/s speed up 10 - 400 mm/s working speed 10 - 100 mm/s height over floor 6,8 m depth of the foundation 3,0 m power requirement 120 kW weight 110,0 t Dimensions (WxDxH) 3,6 x 2,2 x 8,5 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table and ram, cutting impact cushioning, ram interlocking Foundation depth approx. 3,0 m as is where is, stored in dismantled condition

Condition: used, Double-sided cantilever rack for bar stock (custom-built) Height: 1.9 meters Hodpfsxf Ut Hex Aa Ejg Rack length: 4.3 meters Frame spacing: 2000 mm Arm depths: 600 / 500 / 450 and 400 mm Load capacity per arm: approx. 200 kg Load capacity per level (per bay with 3 uprights): approx. 600 kg Total load capacity with 3 uprights: approx. 4800 kg Base width: 1000 mm - 3 uprights = 2 bays = Ideal for 6 meter bar stock - Uprights made of 100 x 50 x 9 mm U-profile - Support arms made of 100 x 50 x 7 mm U-profile - 8 arms per upright (total 24 welded arms) - 3 double-sided uprights with base - Bolted upright connectors made of rectangular tube - Diagonal bracing is missing Assembled dimensions (L x W x H): 4400 x 1450 x 1900 mm Transport dimensions (L x W x H): 2100 x 1500 x 500 mm Total weight: 350 kg

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 850daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 65 Lt./min (REXROTH - Axialkolbenpumpe)motor: 15 kw - 1500d / minmessurements (LxWxH): 2.100 x 2.400 x 4.300weight approx.: 11.000 Capacity: 1500kN. (150 ton - at 245 BAR) Operating selection: Via key switch Manual / set-up via two-hand operation without light sensor fuse on front side (rear side always active) Automatic via two-hand operation at full speed (with active light sensor fuse) Main cylinder: Ø 270mm. Auxiliary cylinder: 2 pcs. Ø 70 x 50mm. Motor: 15kw. - 1500d/min. (IE-3) Pump: 45cc. - 65Lt./min.   REXROTH - axial piston pump Speed: flow 120mm. - Pressure: 13 - 4mm. - Return 170mm./sec. Clearance: 1300mm. Table top: 1200 x 800 x 90mm. - with T - grooves ram plate: 1200 x 800 x 600mm. - with T - grooves & ribbing Installation height: 600mm. (max. distance between table & ram plate) Stroke length: max. 400mm. Table height: 850mm. (Floor to table top upper edge) ----- Hydraulics: (Hydraulic accessories on top of the press) Kontrol Block & Valves (REXROTH Proportional Valves) Prefill valve (NG.125) 8 way guide Hydraulic ram safety device Mechanical ram safety device for TDC position Pressure adjustment via PLC. Speed adjustment via PLC. Pressure stop valve for 600 sec. Air cooler Automatic lubrication for guides Auxiliary motor Hedpfsmpfwdex Aa Eeg Auxiliary pump Control system: Main control box (mounted on the side of the press frame) Pivoting control panel SIEMENS S7 - 1200   KTP. 9 SIEMENS screen (language selection DE.- ENG.) Safety PLC. (SICK) Light sensor for front & back of work area (SICK 750 + 150mm.) Soft starter Two hand operation (Movable) SECOMEA Ethernet connection Ruler for setting the stroke length (450mm. - NOVOTECHNIK 16BIT) Workspace lighting (2-fold IP-66)   8 free ON & OFF outputs on the PLC. for external connections ----- Protective railing around the hydraulics Lateral ladder ----- Documentation: Operating manual DEUTSCH(1 fold paper & 1 fold USB.) Hydraulics & control diagrams Parts lists CE. Certificate Standard :EN.16092/1/3 ----- Total dimensions: approx. 2400 x 2100 x 4100mm Total weight: approx. 11.000kg. Painting: frame RAL 7035 light grey, railing & hydraulics RAL 7016 anthracite grey. -----

Year of construction: 1994, condition: ready for operation (used), Pressing force: 3150kN, table dimensions X/Y: 2500mm/1600mm, stroke (fixed): 280mm, stroke rate: 20-80strokes/min, weight: approx. 68000kg. Including Dreher transfer and feed line. The control system is defective. Documentation available. An on-site inspection is possible. Hjdpoxtff Aefx Aa Esg

Condition: used, Technical details: pressure: 20 t slide stroke: 6 - 60 mm throat: 176 mm Hjdpfxou Nflio Aa Eeg ram adjustment: 55 mm no. of strokes: 155 Hub/min distance table/ram: 270 mm passage width: 470 mm Table dimensions: 300 x 450 mm passage opening in table: 90 mm surface area of ram: 130 x 248 mm inclination: 28 ° mortise hole in ram: 25 x 65 mm table height over floor: 775 mm air pressure - required: 5,5 - 6 bar total power requirement: 3,5 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,3 x 1,1 x 1,95 m High performance press Central lubrication with light barrier (monitored) Linuflex stroke counter (counter) additional steel plate 315 x 400 x 50mm with center hole Ø 63mm *

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Hedpfofxyh Rex Aa Esg Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? :1200 ?

Condition: used, Year of construction: 1992, Pressure 200 t distance between columns 1910 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 800 mm table surface area 1900 x 1150 mm pressure of drawing cushion in table 80 t stroke of drawing cushion in table 300 mm die cushion area 1500 x 950 mm table height over floor 800 mm side window 1000 mm ram surface 1900 x 1100 mm return capacity 36 t speed down 400 mm/s speed up 170 mm/s working speed 30,5 mm/s oil volume 1500 l height over floor 4,85 m height beneath floor 2,6 m power requirement 45,0 kW weight 38,0 t Hedpevuui Rofx Aa Esg dimensions (WxDxH) 3,05 x 2,8 x 5,55 m year of manufacture 1975 - modernization 1992 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, ram interlocking can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: excellent (used), Year of construction: 2003, Manufacturer: ROVETTA Year: 2003 Condition: Used Stock number: 0385 Pressing force: 630 tons Number of connecting rods: 4 Slide stroke: 300 mm Slide adjustment: 250 mm Die clearance at BDC: 950 mm Strokes per minute: 15/65 Maximum front opening: 5,200 mm Hjdpfxoxlh Rfo Aa Eeg Table dimensions: 5,000 x 2,630 mm Slide dimensions: 5,000 x 2,630 mm Main motor power: 132 kW

Condition: ready for operation (used), Year of construction: 1991, pressure 25 t Hodpfxexiy Abs Aa Esg stroke 7 - 62 mm no. of strokes 120-600 Hub/min total power requirement 4 kW weight of the machine ca. 2,5 t

Condition: used, Year of construction: 2000, pressure 130 t no. of strokes 50-250 Hub/min sheet width 250mm mm Hjdpfxoxh Sype Aa Eog stroke 8-120 mm ram - range of adjustment 100 mm table surface area 1600x800 mm ram surface 1600x800 mm hole in the table 1100x250 mm table height 1000 mm 370 mm weight of the machine ca. 24 t dimensions of the machine ca. BxTxH 3900x2500x3800 mm

Condition: used, Year of construction: 1985, Technical details: pressure: 100 t no. of strokes: 35-100 Hub/min throat: 360 mm ram adjustment: 20-130 mm ram surface area: 750x550 mm clamping plate on table: 1000x640 mm adjustment of stroke: 90 mm passage between the columns longitudinal/sideways: 610x500 / 440x550 mm daylight dimension : table/slide low: 300 mm total power requirement: 17,5 kW weight of the machine ca.: ca,7,0 t dimension machine xH: 1,9x1,4x2,7 m - there are 5 T-slots lengthwise on the ram plate - centre hole = 50mm This press is currently for sale without controls. Optional on customer request completion possible. i.D. Hjdpfx Aju Nfh Dea Eeg *

Condition: used, Year of construction: 1997, pressure 0630 t stroke 300 mm no. of strokes 10- 75 Hub/min table-size 3600 x 2200 mm passage width 4000 mm Hedpfjwx R Rdox Aa Eeg ram surface 3600 x 2200 mm column travel -side 2000 mm ram adjustment 150 mm shut height (stroke down, adjustm. up) 1000 mm voltage 400 V height over floor 7600 mm Depth of Press under floor 2500 mm total power requirement 160 kW weight of the machine ca. 225 t dimensions of the machine ca. 750 m² Complete feeding line comes with the machine. It works on a material width of 300- 1600 mm and a thickness of 0,5- 3 mm. Machine has two working tables which move in and out to the front. To the side machine has a stacking device with two pallets. It also has two stacking pallets to the backside. Machine has a Coil charging device of 3 Coils with 25 t, a decoiler Schnutz, a material feeder, a straightening machine and a roll feeder.

Condition: used, Year of construction: 2018, Pressure 315 t stroke 750 mm distance between columns 1700 mm Distance table/ram, max. stroke up, adjustment up 1250 mm Table surface area 1600 x 1300 mm pressure of drawing cushion in table 125 t Die cushion stroke in table 350 mm Die cushion pressure in ram 1000 x 900 t Ram surface 1600 x 1300 mm Side window 1100 mm feed down 400 mm/s feed up 400 mm/s working feed 12 - 44 mm/s Hsdpjvuuf Ejfx Aa Eeg oil volume 2500 l power requirement 35,0 kW Weight 43,50 t dimensions of the machine ca. 3,6 x 3,1 x 6,0 mxmxm height over floor 4,9 mm yom 1987 -> 2018: new electric control Siemens S 7 new ligh guard at the front (Sick C 4000) permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, cutting impact cushioning, ram interlocking, controllable dependant on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse

Condition: new, Year of construction: 2025, pressure 75 t stroke 8-80 mm Hsdpfxjxh Swue Aa Esg no. of strokes 80-200 Hub/min ram - range of adjustment 70 mm table surface area 900x600 mm ram surface 900x470 mm hole in the table 450x180 mm dist. between columns - front to rear 500x350 mm dist. between pillars (front to rear) 788 mm total power requirement 10 kW weight of the machine ca. 10 t dimensions of the machine ca. BxTxH 1600x1200x2800 mm

Condition: used, Year of construction: 1990, Technical details: Pressure: 63 t distance between columns: 200 mm stroke: 150 mm dayligth: 430 mm no. of strokes: 400 Hub/min T-slots H 12 650: 18 mm Hedpfxou Icxqj Aa Esg hole in table: 420x160 b x l mm ram surface area: 650 x 450 mm control: Wanske Tronicpress CNC passage of columns: 550x540 mm tank: 200 l stroke of ram - fixed: 100 mm ram diameter: 40 mm table height over floor: 1000 mm table: 600x450 mm table height over floor with metal base stand: 880 mm total power requirement: 30 kW weight of the machine ca.: 3,9 t Hydraulic automatic punching press for precision work (high-speed press) - for punching, drawing, pressing, minting, bending, riveting, straightening, assembling - with hydraulic gripper feed type HS 150 and 7-roller straightener (moving) - Normal strips of approx. 0.4mm - 2.5mm thickness x approx. 160mm width, as well as narrow strips up to approx. 4mm can be processed. Feed length can be adjusted as required via the control unit. - with ram round column guide - with automatic central lubrication - High-speed: up to 400 strokes min-1 - motorized adjustable fixed stop (bottom can be adjusted by hand/motorized) - Operating modes such as continuous stroke and/or single stroke Equipment: - 1x hydraulic unit - 2x control cabinets *

Condition: used, Year of construction: 1982, pressure 350 t distance between columns 1350 mm stroke 900 mm distance table/ram, max. stroke up, adjustment up 1300 mm table surface area 1300 x 1000 mm pressure of drawing cushion in table 100 t stroke of drawing cushion in table 380 mm die cushion area 350 x 285 mm capacity of ejector in ram 25 t ejector stroke in ram 200 mm table height over floor 750 mm ram surface 1300 x 1000 mm speed down 500 mm/s speed up 160 - 470 mm/s working speed 16 - 44 mm/s drawing speed 57 - 160 mm/s return capacity 32 t oil volume 1700 l Hjdpsvuk Iisfx Aa Eog power requirement 91,0 kW Dimensions (WxDxH) 3,75 x 2,8 x 7,2 m height over floor 5,28 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light-guard (Sick), controllable dependant on pressure/time and way, hydraulic drawing cushion in table (controllabe), hydraulic ejector in ram, ram interlocking in TDC, speeds controllable, two-hand operation stored in partly dismantled condition - can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1964, Technical details: pressure: 125 t stroke: 28 mm number of strokes: 56-225 Hub / Min distance between columns: 1000 mm ram adjustment: 60 mm distance table/ram: 376 mm Table dimensions: B.950xT:720 mm passage opening in table: 400x130 mm height over floor: 1120 mm ram surface area: 920x540 mm mortise hole in ram: Dm 65 x 120 mm column travel -side: 250 mm total power requirement: 30 kW Hsdpfju Nfibjx Aa Esg weight of the machine ca.: 15,5 t dimensions of machine: 3,1x1,34x3,6 m dimensions electric cabinet LxWxH: 0,64x0,22x1,2 m This press is a high-performance press for mass production /series production. - Contains left side a material feed via automatic feed (mechanic) and right side a waste cutter. Feed = 0-200mm, roll width =250mm Partial documentation as a copy available. Machine is not functional and is on sale as is! *

Condition: used, Year of construction: 1990, pressure 200 t distance between columns 1400 mm stroke 300 mm distance table/ram, max. stroke up, adjustment up 500 mm table surface area 1300 x 1100 mm pressure of drawing cushion in table 80 t stroke of drawing cushion in table 150 mm die cushion area 700 x 700 mm capacity of ejector in ram 10 t ejector stroke in ram 50 mm table height over floor 930 mm side window 770 mm ram surface 1300 x 1100 mm speed down 400 mm/s Hjdpfxsvut T Io Aa Eog speed up 410 mm/s working speed 20 - 50 mm/s return capacity 30 t oil volume 1350 l power requirement 70,0 kW weight 23,0 t dimensions (WxDxH) 4,5 x 3,0 x 3,5 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram, controllable dependent on pressure/time and way, cutting impact cushioning No foundation pit necessary

Condition: used, Year of construction: 2005, Pressure 1000 t distance between columns 4100 mm stroke 1200 mm Distance table/ram, stroke up 2100 mm Table surface area 4000 x 2200 mm pressure of drawing cushion in table 360 t Die cushion stroke in table 300 mm Die cushion area in table 3500 x 1600 mm Die cushion pressure in ram 100 t Die cushion stroke in ram 160 mm Die cushion area in ram 3250 x 1600 mm Ram surface 4000 x 2200 mm Side window 1300 mm Oil volume 8000 l Power capacity 300,0 kW Hodpfx Ajvuubgea Eog Dimensions (WxDxH) 5,75 x 4,3 x 9,55 m Height above floor 7,7 m year of manufacture 1973 - modernization 2005 with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition Video at seller’s site before dismantling available