Used Double Cross Cut Saw for sale (33,120)

Condition: new, Year of construction: 2025, Optimum Optisaw SD 500 Double miter metal band saw with swiveling saw bow Art. no. 3292380 length approx. 2122 mm width/depth approx. 1046 mm height approx. 1497 mm Weight approx. 522 kg Electrical data Motor power coolant pump 100 W Total connected load 3.8 kW Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 35 / 70 m/min Saw band length 3770 mm Saw band width 34 mm Saw band thickness 1,1 mm Cutting angle 45 - -60 ° Feed Hydraulic via lowering cylinder Lifting of saw bow manually Cutting ranges 0° round (solid material) 355 mm 0° square (solid material) 280 mm 0° rectangular upright (solid material) 280 x 490 mm -45° round (solid material) 290 mm -45° square (solid material) 250 mm -45° rectangle standing (solid material) 250 x 250 mm +45° round (solid material) 355 mm +45° square (solid material) 280 mm +45° rectangle upright (solid material) 280 x 340 mm +60° round (solid material) 230 mm +60° square (solid material) 180 mm +60° rectangle standing (solid material) 180 x 220 mm Heavy industrial design Low noise operation High cutting accuracy due to vibration-free running Miter adjustment -45° to 60° by swiveling the entire saw bow High-quality bi-metal saw band as standard equipment Microswitch for automatic end stop Coolant pump Ball bearing saw band guide with hard metal plates for optimal cutting results Easy adjustment of the lowering speed by means of feed control valve in the control panel Large dimensioned quick clamping screw stoc Podpfx Aegd Si Eeg Derd [...]

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 2449220206, cutting length (max.): 6,000 mm, Machine currently in use, but with very low operating hours. Everything functions properly, but the machine will require servicing to be in perfect condition. Air hoses need replacement, cylinders need to be adjusted, and lubrication should be scheduled. The blades are in good condition. The machine can be disassembled at any time and loaded for transport. A custom-made, closed wooden transport crate can be provided on request at an additional cost. More photos and videos available upon request. Psdpsxx Ayzofx Ag Dsrd

Condition: good (used), Year of construction: 1999, machine/vehicle number: 89257, GreCon Dimter Opticut 704 L saw from 1999. Podpfetvahlox Ag Dsrd Machine dismantled from a functioning production line. No output ejectors; the machine requires reintegration or retrofitting. Available for inspection at our premises.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 08D156, type of input current: three-phase, Pertici Univer 500d2k in good condition, no issues. Used for cutting aluminium profiles to length. Has been used only sporadically in the past 3 years due to reliance on an external supplier, making it redundant. Maintained by KRUBA, can be seen in working condition. Prodpexxcbfjfx Ag Dsd

Year of construction: 2004, condition: excellent (used), Technical specifications: System for welding longitudinal seams on steel beams with T- or H-profile, crane runway girders or bridge sections made of sheet metal - Max. boom arm height: 6,600 mm - Total length of the welding system: 6,700 mm - Horizontal reach of the boom arm: 5,000 mm - System runs on rails - Rail gauge: 2,065 mm - Submerged arc welding process (SAW) - SAW welding units - Power source: MESSER LG800N - Number of power sources: 2 units Pedpfx Asxz Hu Iog Dsrd - Output: 400 amperes - Tack welding device The system is assembled and available for inspection under power in production. The seller assumes no liability for typographical or data transmission errors. The machine’s condition in terms of appearance, technology, and wear corresponds to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet Prjdpfxju Nigko Ag Dsd - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: used, Year of construction: 1994, Cutting length scale up to 5000 mm, saw blade 420 mm, roller conveyor 1500 mm Storage location: customer Psdsw Sadrjpfx Ag Dord

Condition: like new (used), As-new Twin band saw Braun Canali ML 1250 TWIN Predpjxz R Uxofx Ag Djd For sale by customer order

Condition: used, Year of construction: 1993, Technical details: cutting diameter: 195 x 120 mm cutting range min.: 135 x 120 mm saw blade diameter: 380 mm cutting length min.: 500 mm cutting lenght max.: 6000 mm Prodpfx Agjwz Hygo Dod max. spindle speeds: 2800 U/min total power requirement: 3 kW weight of the machine ca.: 850 kg

Condition: good (used), Year of construction: 2020, usefull lenght : 6000 mm blades 550 mm cutting angles: -45°/+15° Prodpfx Ajvvauueg Dsd extra pneumatic clamps Labelprinter Software Pro and Slice HMI importdriver

Condition: new, - profile width max. (mm): 90 - profile height max. (mm): 80 - saw blade diameter (mm): 350 - saw blade bore (mm): 30 - motors: 2 each 1,5 kW - suction connections: 2 each Ø 80 mm - Pressure (bar): 6 - 7 - weight (kg): 300 - Cutting of mouldings: for wood, plastic and aluminum frames - Saw blades: 2 fixed at 45°. - Pneumatic aggregate stroke: with two-hand operation - Adjustable stroke speed - Pneumatic lamella clamping: in machine cycle - Automatic lamella adjustment: to profile shape - Diagram plates (mm): 700 long on the right and left side - Pneumatic length stop - Motor protection switch - Motor brakes - Tool kit - maintenance unit - Pressure switch Machine features - Easy handling - Quickly executed work cycle Predefiqhbepfx Ag Dsd - Low maintenance and cleaning effort

Condition: excellent (used), CATALOG NUMBER 7623 Technical data: - max saw blade diameter 300mm - spindle diameter 30mm - blade guards 2 pcs - pneumatic blade feed - saw units adjustable to 45° - manual adjustment of saw unit spacing - min cutting length at 90° 300mm - max cutting length at 90° 4600mm - cutting width 90mm - cutting height at 90° 90mm - pneumatic clamps 2 pcs - control buttons - material supports 3 pcs - main motor 2×1.1kW - extraction port diameter 2x90mm - dimensions (L/W/H) 5030x1150x1400mm - weight approx. 500kg ADVANTAGES – Italian production – tiltable saw units – used saw, in very good condition Net price: 15900 PLN Net price: 3780 EUR (depending on the rate of 4.2 EUR) (Prices may change with larger fluctuations) Pedpfewbz Uxsx Ag Djrd

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Predpfxsxnlgcj Ag Dod Storage location: Garbsen

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Double edger and trim circular saw with electronic control, consisting of: RET alignment and infeed table. Chain bed in front of the machine with liftable and lowerable pressure roller. Laser unit. DK 90 L 1000: Passage width 1000 mm. Cutting height 125 mm. Feed speed frequency-controlled up to 100 m/min. Automatic roller height adjustment with roller pressure. Width adjustment hydraulically, electronic positioning control with the following setting options: Continuously variable, cm indexing, and switchable to 2 cm indexing. Cutting width between flanges 24 - 440 mm. Pedpfjwn D Izox Ag Dsrd 10 adjustable fixed dimensions, direct input in mm. Constant dimension allowance, shrinkage allowance (percentage). Splitter wedge pair: 1 x zero line, 1 x independently hydraulically adjustable with electronic positioning control. Splitter wedge opening 48 - 600 mm. Chain bed on the outfeed side. Motor 90 kW with power belt drive. Hydraulic unit. Chip separator ASV DK II with 2 separating lamellae. Electrical cabinet with power section and PLC control. Control panel. Lath clamping sleeve 403 mm clamping length. Adjustment and zero sleeve. Professionally dismantled and loaded onto truck, free of charge.

Condition: like new (used), Year of construction: 2016, operating hours: 22 h, functionality: fully functional, saw blade diameter: 500 mm, Elumatec Double Mitre Saw DG 142 with E580/1 Control – Precision Saw for Aluminium and PVC Profiles For sale is a high-quality Elumatec DG 142 double mitre saw equipped with electronic control system E580/1. This machine is ideal for the precise cutting of aluminium, PVC, and light metal profiles – particularly suited for window, door, and façade construction. Technical specifications: Manufacturer: Elumatec Model: DG 142 Control: E580/1 (automatic positioning and angle adjustment) Mitre cuts: 45° – 90° (automatically adjustable) Cutting length: up to approx. 5,000 mm (depending on configuration) Blade diameter: approx. 500 mm Speed: approx. 2,800 rpm Connection: 400 V / three-phase Condition: used, technically flawless Prsdpow D Rv Dsfx Ag Ded Availability: immediate +++ Operating hours: 22 HRS +++ Special features: - Automatic positioning of both saw units - Precise and clean cuts thanks to stable machine guidance - Programmable control for highly repeatable series cuts - Excellent cutting quality, also on demanding profiles - Ideal for metal fabrication, window production, and conservatory construction The machine is network-capable incl. extraction unit + SICK light curtain

Condition: used, Parts for PMC 12 - or - for LKH 310 - Clamping elements Predpfoxy Ib Hex Ag Dsd - Saw blade guiding elements

Condition: good (used), Double Miter Saw Rapid DGS – used, fully functional, ready for demonstration For sale is a Rapid Double Miter Saw DGS in well-maintained, working used condition. The machine is immediately ready for operation and can be demonstrated at any time. Features / Specifications: Model: Rapid DGS Precision double miter saw suitable for aluminum, plastic, and, if applicable, light metal profiles Sturdy, robust construction Miter cuts possible (both saw heads adjustable) Clean, technically flawless used condition Condition: The machine is in full working order. All functions can be tested live during an inspection. Viewing & Collection: Pjdsxzdvispfx Ag Dsrd An inspection by appointment is possible. Collection by the purchaser – assistance with loading can be provided if required; crane and forklift are available. Price: Negotiable If interested or if you have further questions, please get in touch!

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Infeed lengths min/max: 1800 - 6300 mm Pedpfx Agoxygaze Dord Timber widths min/max: 40 - 300 mm Timber thicknesses min/max: 15 - 120 mm Minimum timber cross-section: 40 x 15 mm Maximum package dimensions: 320 x 140 mm Maximum workpiece weight: 150 kg Final length for ejection to sorting min/max: 120 - 2500 mm Final length for forklift min/max: 400 - 2000 mm Maximum stack dimensions (W x H): 1200 x 1200 mm

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: SK-K-24001, Optimizing cross-cut saw line with scanner Manufacturer: Dimter Type: OptiCut 450 Year of manufacture: 2015 Item no.: SK-K-24001 DIMTER cross-cut saw line with 1 x OptiCut 450 Podpfxewya Syj Ag Dord and F 100 feeding system with LuxScan CombiScan+ C 200 and curvature measurement The line was in operation until 2024, has been professionally dismantled and can be viewed.

Condition: used, This Elumatec double mitre saw, model DG79, is being auctioned in our online industrial/machinery insolvency auction: Wietec Fenster GmbH – machinery fleet, workshop equipment, trailers. Pedpsxu Tv Eofx Ag Dsrd

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Machine is completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and incremental dimensions Digital readout for horizontal cuts PLC control with a 2-line display and plain-text error diagnosis for operation mode and fault diagnosis Infinitely variable feed speed up to 24 m/min Automatic workpiece end detection Calculator function integrated in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Max. trimming height: 2100 mm Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Predpfjw Nac Ajx Ag Djd Motor: 5.5 kW Saw blade speed: 4,500 rpm Saw blade diameter: 300 mm Air requirement: 1,200 m³/h Air velocity: 20 m/s Static negative pressure: 1,200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5,620 (plus extraction nozzle) x 1,480 x 2,948 mm Room height: 2,990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connection load: 5.7 kW With Supercut pre-scoring unit With pneumatically swiveling saw unit With longitudinal stop for lower workpiece support With short folding rail, complete Availability: by arrangement Location: Flörsheim

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, cutting length (max.): 6,000 mm, saw blade diameter: 550 mm, Used Emmegi PrecisionTS2 Emmegi Precision TS2 Double Miter Saw Year of 2014 Predpewaz Agsfx Ag Ded Cutting length 6000mm Double miter saw with 3 controllable axes with automatically movable saw unit and electronic control of all miters from 45° (inside) to 15° (outside) with an accuracy of 280 intermediate positions per degree. Including profile support roller conveyor on the movable unit Additional clamping device on the roller conveyor Label printer with dispenser PRO software (overlength cutting, underlength cutting, cross-cutting, wedge cutting) SLICE software (butt cuts with variable corners and lengths up to a usable cut of 500mm) Driver for connecting external calculation programs

Condition: good (used), Double Mitre Saw Elumatec DG 740/02 – used, operational, ready for demonstration For sale is an Elumatec double mitre saw DG 740/02 in good, fully functional condition. The machine is immediately ready for use and can be demonstrated on site. Psdsxzdulopfx Ag Dord Technical Data / Features: Model: Elumatec DG 740/02 Double mitre saw for precise cutting of aluminium and plastic profiles Robust construction, precise cut guidance Both saw units are pivotable / can perform mitre cuts Cleaned and well-maintained used condition Condition: The machine is in working order and in age-appropriate good condition. All functions can be tested live during viewing. The machine has been removed from production, cleaned, and is ready for demonstration in a warehouse until sold. Viewing & Collection: A non-binding inspection is possible by appointment. Collection by the buyer. Price: Negotiable If you are interested or have any questions, please feel free to contact us!

Condition: new, Year of construction: 2025, Cutting length 3200 mm Pjdpfxewiipme Ag Dord Cutting height 1600 mm Motor output 1,3 kW Dimensions (L/W/H) 4000x1500x2000 mm machine weight ab. 350 kg

Condition: used, This HAFFNER double mitre saw is being sold in our industrial auction / machinery auction as part of the insolvency auction for Wietec Fenster GmbH – machinery fleet, workshop equipment, trailers, online auction. Predoxu Izcopfx Ag Djd