Used Dmg Dmu 50 for sale (395)

Condition: good (used), Description: The machine is in good technical condition and can be tested by prior arrangement. Control system – Siemens, including filtration. Bed inclination, bed material, number of guideways: 45°, cast iron, 3 (4 with Y-axis option). WORKING AREA (V1–V4): - Swing over bed: 19.69" Rsdpsx Apkzsfx Aa Usp - Swing over cross slide: 11.42" - Maximum turning diameter: 7.87" - Distance between centers: 30.71" - Maximum turning length: 19.69" / 15.82" / 20" - Max. unsupported workpiece weight: 35 lb - Max. overhang from spindle face (unsupported): 165" - Max. workpiece weight between centers: 100 lb - X-axis travel: 7.48" - Y-axis travel (option): 3.14" (+/- 1.57") - Z1-axis travel: (specify) - Z3-axis travel: (specify) - Spindle center height above floor: 20.67" / 21.65" / 39.26" (38.77" + 1.18") MAIN SPINDLE: - Spindle nose (flat type): FL 140h5 - Chuck diameter: 6.69" (optionally 8.26") - Bar capacity: 2.01" - Spindle bore: 2.87" - Guide bush diameter: 2.05" - Inner diameter of front bearing: 3.94" - Spindle bearing lubrication: grease - Max. power (100/40% duty cycle): 20.82 / 36.20 kW - Speed range (100% duty cycle): 6000 rpm - Speed range (40% duty cycle): 6000 rpm - Rated speed: 1500 rpm - Max. torque (100/40% duty cycle): 93.72 / 125.46 ft*lb - Voltage type, number of ranges: AC/1 - Motor type: ISM52

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC YOM: 2009, until 2011 showroom machine, from 2012 operating The machine can be inspected by appointment in the factory under power. Condition: Good (high accuracy), ready for immediate use. Spindle hours (August 1st, 2025): 9.580 h The heart of the machine is the integrated traveling column with turning milling spindle and interpolating B-axis. Machine basic data: * Part hollow clamping device (hydraulic) * C-axis * Cross slide above with turning/milling spindle as motor spindle, with hydraulic clamping in turning, tool holder: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * Absolute, direct measuring systems in X-, Y-, Z1-axis * USB-interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Spindle distance: 1.510 mm * Bar diameter max.: 65 mm Main drive I: * Drive power (100% / 40% ED): 24 / 34 kW * Speed range from - up to: - 5.000 rpm * Speed of the C-axis: - 5.000 rpm Turning/milling spindle: * Tool holder: Capto C6 * Spindle speed: - 12.000 rpm * Drive power (100% / 40% ED): 13.2 / 22 kW * Torque (100% / 40% ED): 60 / 100 Nm Tool magazine: * Number of tools: 36 * Dimensions of the machine approx. (Width/Depth/Height): 6.860 x 4.220 x 2.530 mm * Total weight of the machine approx.: 18,5 tons EQUIPMENT: * Well equipped … * No steady rest available * Documentation complete available. Detailed technical data sheet and information on equipment available on request. Rodpfx Aow Hg Nlea Ujp There is no guarantee for correctness and completeness of the technical details and and accessories.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 8,574 h, General Data Machine weight 9200 kg Control Unit Brand SIEMENS Main Drive Spindle speed range 5000 Number of axis 5 Movement Rodpsx D Izbjfx Aa Usp X-Axis Movement 750 mm Y-Axis Movement 200 mm Z-Axis Movement 1100 mm Workpiece Workpiece drm 400 mm This 5-axis DMG MORI CLX 450 TC was manufactured in 2022, featuring a max. X-axis stroke of 750 mm, Y-axis stroke of 200 mm, and Z-axis stroke of 1,100 mm. It handles a max. workpiece diameter of 400 mm and length of 1,100 mm, with a bar capacity of 65 mm. Spindle speeds reach up to 5000 rpm. Weighs 9200 kg. If you are looking to get high quality turning capabilities consider the DMG MORI CLX 450 TC machine we have for tact us for more information. Application Types Turning

Year of construction: 2018, operating hours: 5,080 h, condition: ready for operation (used), General Data Machine weight 4700 kg Measurements height 1852 mm Dimensions Rodpfxsx D Huae Aa Usp Machine Length 1928 mm Control Unit Brand SIEMENS Model 840D Main Drive Number of axis 3 Spindle Speed 5000 RPM Spindle motor power 16.5 kW Movement X-Axis Movement 242.5 mm Z-Axis Movement 540 mm Y-Axis Movement 80 mm Technical Specification Driven Tools yes This 3-axis DMG CLX 350 V4 was manufactured in 2018 and features a max turning diameter of 320 mm, spindle speed up to 5,000 rpm, and a bar capacity of Ø 65 mm. It includes a VDI 30 turret with 12 stations for driven tools, enhancing versatility. Ideal for precision turning with rapid traverse rates and Siemens 840D sl control for advanced operations. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2024, General Data Measurements width 2710 mm Rodpox D R U Rofx Aa Uep Measurements depth 3900 mm Measurements height 2470 mm Machine weight 10000 kg Main Drive Spindle speed range 5000 Spindle motor power 14/17 kW Number of axis 5 Additional Equipment Dynamic two-pressure clamping for the main and counter spindle Tailstock function for the counter spindle with foot switch This 5-axis DMG MORI CLX 450 TC + Robo2GO was manufactured in 2024. It features a universal turning/milling center with a main spindle speed of up to 5000 rpm and a milling spindle speed of up to 12000 rpm. The machine includes a B-axis of ±120°, Y-axis travel of ±100 mm, and a 30-fold chain magazine. It's equipped with Siemens 840D sl control for precision. Consider the opportunity to buy this DMG MORI CLX 450 TC + Robo2GO turn-mill centre. Contact us for more information. Application Types Turning

Year of construction: 2010, condition: ready for operation (used), Lathe CTV 250 - R Manufacturer DMG Gildemeister Redpfxji Ewq Sj Aa Uop Serial number 6860000451 Switch-on hours: 46.491 spindle hours 30.748 floor space 4m x 3m optional cooling unit for connection of two CTV 250

Condition: excellent (used), Year of construction: 2015, X-axis 850 mm Y-axis 520 mm Z-axis 475 mm Spindle speed 10,000 rpm Spindle mount HSK 100 Rjdpfxewvr Tns Aa Usp Tool changer 40 positions Control SIEMENS 840 Dsl Power 33 kVA Including internal coolant (IKZ) Including various tool holders Including measuring probe TS 649 Including Rotoclear Spindle hours: 10,730 h

Year of construction: 2012, operating hours: 38,984 h, condition: refurbished (used), machine/vehicle number: 06860001401, Swing diameter: 320 mm Automatic workpiece feeder Chip conveyor High pressure cooling system with paper filter Rjdpsk Ny R Defx Aa Uep The price contains the machine itself, the cost of unassembly and the loading on truck. Every other cost on your side.

Condition: refurbished (used), Year of construction: 2012, operating hours: 38,984 h, functionality: fully functional, machine/vehicle number: 06860001401, spindle speed (max.): 5,000 rpm, turning diameter: 320 mm, TECHNICAL DETAILS Max. swing diameter: Ø 320 mm Spindle speed: max. 5,000 rpm MACHINE DETAILS On-time: 60,009 h Spindle hours: 38,984 h Machine weight: 6,000 kg Connected load: 40 kVA EQUIPMENT - Automatic workpiece feeder - Chip conveyor - High-pressure cooling system with paper filter Further technical details according to the manufacturer - without guarantee X-stroke: 650 mm Y-stroke: +90 mm / -65 mm Z-stroke: 300 mm Max. workpiece diameter: Ø 220 mm Max. workpiece height: max. 160 mm Max. chuck diameter: Ø 260 mm Tool turret: 12 x VDI 40 Speed: 4,000 rpm Rjdewcrgnspfx Aa Uep

Condition: excellent (used), Year of construction: 2022, operating hours: 13,312 h, functionality: fully functional, machine/vehicle number: 00360002291, turning length: 1,100 mm, spindle speed (min.): 5,000 rpm, - B-axis: ±120° - Y-axis: ±100 mm - 30-fold chain magazine Rsdpfx Aaowylh He Uep - Tailstock: hydraulically operated with foot control pedal

Condition: excellent (used), Year of construction: 2001, Hello. I have a renowned brand of CNC milling machine CINCINNATI Arrow _ 1250 for sale. _ Type: CNC milling machine Manufacturer: CINCINNATI Model: Arrow _ 1250 Control: HEIDENHAIN TNC430 Year of manufacture 2000 _ Machine parameters: - tool magazine: 21 pcs. on SK40 / BT40 - max. rpm 8000/min. - max. travel in the X axis: 1262 mm - max. travel in the Y axis: 562 mm - max. travel in the Z axis: 562 mm - workpiece measuring probe - cooling system through the spindle - measuring rulers in all 3 axes - spindle drive power: 11 KW - chip conveyor Rjdou Au Akopfx Aa Ujp - DTR - machine weight: 6 tons THE MACHINE IS IN PERFECT TECHNICAL AND VISUAL CONDITION!!! _ WHY IS IT WORTH BUYING MACHINES IN PPM? - we have our own service _ stationary and mobile - we have already sold over 700 machines - possibility of starting the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines have undergone a professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing.

Condition: excellent (used), Year of construction: 2006, Universal 5 axis Machine Center ---Good working Conditions ---- DMG DMF 250 Linear Year Mfg 2006 Rjdpfxjx Nmllo Aa Uep Heidenhain iTNC530 control Travel X2,500 Y920 Z820mm NC Rotary Chuck _ Hoffmann (A axis) NC B axis -105 ~ 105 degree (Spindle Head) NC C axis 360 degree ATC 30 magazine Spindle 18,000rpm Spindle Taper BT40 Direct Measuring X,Y & Z axis

Condition: excellent (used), Year of construction: 2020, Distance between spinles 800mm, Y axis (+/-105mm), C axis 0.001 degrees, B axis -30/+210 degrees, main spindle speed 5,000rpm, sub spindle speeds 6,000 rpm, milling speed 12,000rpm, bar capacity 65mm, 38 station ATC, Rodjw Nwfbspfx Aa Uop spindle power 22/18.5 kw, Siemens 840D control, tool setter, through spindle coolant, magazine barfeed, robot loader,

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 Redpfxsyml U Se Aa Ujp spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller manufacturer: SIEMENS, controller model: 840D sl, spindle speed (max.): 15,000 rpm, spindle motor power: 46,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMF 260-11 was manufactured in 2017. A universal machining centre featuring a travelling column, X-axis linear drive at 80 m/min, and a motor spindle speed up to 15,000 min-1. It includes a swivel head, a 30-tool magazine, and a rigid table measuring 3,200 x 1,100 mm. Consider the opportunity to buy this DMG DECKEL MAHO DMF 260-11 universal machining centre. Contact us for more information about this machine. • Swivel head (B-axis) • Rigid table: 3,200 x 1,100 mm (125.98 in x 43.30 in) Rjdpfx Aex D Iclea Uep • Rapid traverse (standard): 40 m/min (131.2 ft/min) • Acceleration (standard): 4 m/s² (13.12 ft/s²) • Tool clamping: DIN 69872 • Tool magazine: 30 tools (chain with double gripper) • Chip-to-chip time: 9 s (SK40) • Direct measuring systems • Full-protective cabin and coolant tank • S-A3070 Dynamic package for DMF 260 linear (Y 1,100 mm): • Linear drive X-axis with 80 m/min (262.48 ft/min) • Rapid traverse XYZ: 80/60/60 m/min (262.48/196.86/196.86 ft/min) • Acceleration XYZ: 5/6/6 m/s² (16.4/19.68/19.68 ft/s²) • Active chiller for main spindle and linear motor • Tool magazine: 30 tools (chain with double gripper) • Chip-to-chip time: 7.5 s (SK40) • Motor spindle speedMASTER SK40: • Torque: 200 Nm / 130 Nm (148 ft-lbs / 96 ft-lbs) • 40% / 100% duty cycle Additional equipment • Chip conveyor (scraper type) Technical Specification Taper Size SK 40

Condition: used, DMG Mori Panel 85-240VAC 0,3A 2386389 ( 110498 ) ID-No.: 2386389 Suppl.: 110498 Rsdpfeymqu Rex Aa Usp

Condition: excellent (used), Year of construction: 2011, FOR SALE 5-AXIS Machining Centre Model: DMG SAUER ULTRASONIC 20 LINEAR Year: 2011 Configuration: Complete machine with robot To complete the technical file, could you please specify the following characteristics: - Table capacity / Axis travel (X × Y × Z): [e.g., 800 × 500 × 500 mm] - Payload / Max. table load: [e.g., 1,200 kg] - Accepted raw workpiece dimensions: [e.g., Ø 500 mm / 700 × 500 mm] - Spindle power / Torque: [e.g., 18 kW, 200 Nm] - Robot capacity (Payload / Reach): [e.g., 10 kg, reach 1,200 mm] - Ultrasonic machining capability: [Amplitude, frequency, compatible tools] SIEMENS CNC Awaiting your response, I remain at your disposal for any further information. Rodpfx Aaoyi Tpio Uep

Condition: ready for operation (used), Year of construction: 2004, operating hours: 31,960 h, controller manufacturer: HEIDENHAIN, number of axes: 2, This 2-axis DMG GILDEMEISTER CTX 320 linear V3 was manufactured in 2004. A versatile turn-mill centre, it offers robust construction and precision for complex machining tasks. If you are looking to get high quality turning and milling capabilities consider the DMG CTX 320 linear V3 machine we have for sale. Contact us for more information. Additional equipment • Bar package with a pick-up device and parts conveyor belt • Bar guide for 1.5 metre bars and workpiece stop • Hainbuch SK 65 clamping top • Indicator light for machine's operating status • Cooling unit for air conditioning the control cabinet • OPTIONAL: A basic tool kit / A large selection of Hainbuch SK 65 clamping heads Machine Benefits Technical Machine Benefits • 12-position tool turret with driven tools at all stations Rsdex Nr T Uopfx Aa Uep Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2004, operating hours: 18,504 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 110 mm, overall weight: 20,000 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840D Powerline, number of axes: 7, This 7-axis DMG Gildemeister GMX 400 linear was manufactured in 2004, featuring a maximum turning diameter of 640 mm and a turning length of 1,585 mm. It includes a Sinumerik 840D Powerline control, a milling spindle with a max speed of 12,000 rpm, and a tool magazine with up to 120 positions. If you are looking to get high-quality turn-mill capabilities, consider the DMG Gildemeister GMX 400 linear machine we have for sale. Contact us for more information. Additional equipment • Oil mist extraction • Coolant tank with belt filter system • Internal coolant system with 80 bar pressure • Approx. 30 tool holders Machine Benefits Technical Machine Benefits Rsdpsx D S Dgjfx Aa Uop • Drive power - main spindle: max. Torque 600 nm • B-axis: +/- 120° • C-axis resolution: 0. 001° and 1° • Maximum turning diameter: 640 mm • Turning length: 1585 mm • Standard turning diameter: 400 mm • Distance between centers of main spindle: max. Bar diameter 90 mm • Chuck diameter: 250 mm (max. 400 mm) • Number of tool positions: 12 positions • Turret tool holder: 40 mm din 69880 Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2022, operating hours: 123 h, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK One 828D, table width: 650 mm, table length: 850 mm, table load: 600 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, This 3-axis DMG M1 vertical machining center was manufactured in 2022. It features a Siemens SINUMERIK One 828D control, a spindle speed of 12,000 rpm, and a table size of 850 x 650 mm supporting up to 600 kg. Equipped with a 24-place tool changer and both internal and external cooling systems, it ensures precise milling operations. If you are looking to get high-quality milling capabilities consider the DMG M1 machine we have for sale. Contact us for more information. Additional equipment • Automation interface with 6-axis robot, high dynamics • Siemens PLC and HMI with safety module • IDS industrial camera with Halcon Vision integration Rjdsx D Rw Eopfx Aa Ujp Machine Benefits Qualitative Machine Benefits • Schunk clamping technology Technical Machine Benefits • Operating unit: handwheel + touch panel • Spindle cooling: water-cooled, temperature monitoring • Cooling lubricant: internal & external cooling, 20 bar • Chip conveyor: left-sided, belt conveyor • Pneumatic system: integrated with external pressure gauge field • Led work area lighting • High-precision 3-axis cnc machine with automation preparation • Compact footprint • Ideal for precise milling, manual or automated • Renishaw tool and workpiece probe Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2009, Horizontal Machining Center DMG Deckel Maho DMC65 H duoBlock Control: Heidenhain iTNC 530 Year of manufacture: 2009 Travel ranges: X-axis: 650 mm Y-axis: 700 mm Z-axis: 700 mm B-axis: 360° Spindle taper: ISO 40 Tool magazine: 120 positions Spindle speed: 12,000 rpm Chip conveyor Coolant system with 600 l filter and 40 bar 2-station pallet changer 3D touch probe (Renishaw) Redpoylihtefx Aa Ujp Blum laser New Weiss spindle in 2022

Condition: excellent (used), Year of construction: 2008, 5-Axis Machining Centre DMG Deckel Maho DMC 80 U Duoblock Control: Siemens Sinumerik 840 D Year of manufacture: 2008 Travel paths: X-axis: 800 mm Y-axis: 1,050 mm Z-axis: 850 mm Spindle interface: HSK 100 Tool magazine: 60 positions Gear-driven spindle: 8,000 rpm Max. workpiece diameter: 900 mm Max. workpiece height: 1,450 mm Rodpfoyligcjx Aa Usp Chip conveyor Coolant system with deep bed filter Coolant supply through the spindle 2-position pallet changer 3D measuring probe (Renishaw) Blum laser Extraction unit

Condition: ready for operation (used), Year of construction: 2023, This 5-axis DMG MORI DMP-70 was manufactured in 2023, featuring a Siemens 840D sl control and a BBT30 direct-drive spindle with a maximum speed of 24,000 rpm. It includes a 25-tool ATC and coolant through spindle at 40 bar. Ideal for high-speed, 5-axis machining with its integrated swivel rotary table. If you are looking to get high quality machining capabilities consider the DMG MORI DMP-70 machine we have for sale. Contact us for more information about this machine. Application Types Rsdpfx Aaex D H Hie Uep Milling

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, CNC machining centre DECKEL MAHO DMC 835V Year of manufacture: 2007 Control: Siemens 840D 4th axis (rotary table) controlled Rodeyn Rfropfx Aa Uop incl. touch probe Technical data: Tool holder: HSK63 Tool changer with 30 positions X-axis: 835 mm Y-axis: 510 mm Z-axis: 510 mm

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 4,500 kg, Heidenhain TNC 426 Redpfx Asylhybea Usp travels 800X500X500 mm table 800X500 mm BT 40 tool changer