Used Demag Df 45 C for sale (508)

Condition: ready for operation (used), Year of construction: 2019, operating hours: 19,884 h, General Data Machine weight 27000 kg Measurements height 278 mm Dimensions Machine Length 890 mm Gtjdpfxsx H U Ehe Admst Injection Unit Screw diameter 60 mm Clamping Unit Clamping force 3500 kN This DEMAG El-Exis SP 350/820-2500 was manufactured in 2019. A robust electrical injection moulding machine, it features a screw diameter of 60 mm, a clamping force of 3500 KN, and a tie bar distance of 820 mm. With dimensions of 8.90 x 2.21 x 2.78 meters and a weight of 27,000 kg, consider the opportunity to buy this DEMAG El-Exis SP 350/820-2500 electrical injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: good (used), Year of construction: 2011, Column jib crane, overhead crane, workstation crane -Large base plate: 2000 x 1140 mm -Load capacity: 1000 kg -with chain hoist: Demag type DCS-PRO 10-1000 1/1 H5 VS6-11 year of manufacture 2011 -Main stroke: 6 m/min Gtjdpfx Ajxzt Nfodmot -Drive system: Demag type E22, year of manufacture 2011 -Travel speed: 24.0/6.0 m/min -Projection: 3860 mm -Total height: 4470 mm -Hook height: 2590 mm -Swivel range: 270° -Transport dimensions: 4470/2000/H1450 mm -Empty weight: 1004 kg

Condition: used, Pillar Jib Crane DEMAG Type KBK 2 Year of manufacture: 1979 Load capacity: 500 kg Godpfxsxtq Amj Admjtt Slewing range: 270° Outreach: 3200 mm Overall height: 3250 mm Jib length: 3100 mm Height to underside of jib: 2730 mm - Jib profile DEMAG C-section rail KBK 2 - Trolley for DEMAG C-section rail KBK 2 - Base plate of crane pillar is no longer original L x W x H = 450 x 450 x 25 mm with cut-out (4 holes Ø approx. 28 mm) Dead weight: 270 kg Good condition

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, Drivetrain Drive: Wheel Gtsdpfx Aewk T Uijdmot Weights Empty weight: 48.000 kg Functional Lifting capacity: 220.000 kg Identification Serial number: 82609 Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 70200 Transport dimensions (LxWxH): 15.3x3x4 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Demag Ergotech 3300-840, Demag injection molding machine, used machine Manufacturer : Demag, Sumitomo Model: Ergotech 3300-840 Overall dimensions : Length x Width x Height: 6.5 x 2.0 x 2.2 meters Net weight (without oil): 13 800 kg TECHNICAL DATA (BY SCREW DIAMETER) ----- Description Unit "A" "B" "C" ----- Screw diameter: [mm] 45 50 60 L/D ratio: [-] 20 20 20 Injection pressure (at 400 °C): [bar] 2402 1946 1351 Shot volume: [cm3] 358 442 636 Shot weight (PS): [g] 320 400 570 Barrel heating power: [kW] 13.0 14.8 23.1 Installed electrical power*: [kW] 58/68 60/70 68/78 ----- * Note: Values are higher with electric screw drive (WA). Gtedpfxsx Sqi Hs Admjt INJECTION UNIT FEATURES ----- Max. dosing stroke: 225 mm Max. nozzle retraction: 470 mm Nozzle immersion depth: 40 mm (SVO) / 30 mm (SPI) Nozzle contact force: 80 kN Electric screw drive (WA): 20.5 kW Material hopper capacity: 75 liters GENERAL AND HYDRAULIC DATA ----- Hydraulic oil tank capacity: 700 liters Pump unit power: 45 / 55 kW Dry cycle (EUROMAP 6a): 1440 / 1600 h-1 Dry cycle (without nozzle movement): 1890 / 2100 h-1 Continuous noise level: 74 dB (A)

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 1900 mm Measurements depth 6600 mm Measurements height 2400 mm Machine weight 14900 kg Injection Unit Screw diameter 50 mm Shot weight 482 g Stroke volume 530 cm3 Injection pressure 2426 bar Adjustable heating zones 5 Nozzle pressure 110 kN Gedpfjx D Nwqox Admstt Clamping Unit Clamping force 2500 kN Opening stroke 670 mm Max open daylight 1380 mm Mould height min 330 mm Mould height max 710 mm Ejector stroke 200 mm Ejector force for / back 81 kN Media Pump drive power 30 kW Oil tank 550 L This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2500 kN, a screw diameter of 50 mm, and a shot weight maximum of 482 g. The machine has a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600 machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable -Type: DSE -Connector: 16-pin -Transport dimensions: 600/330/H140 mm -Weight: 3.5 kg Gjdpjxzq Sqefx Admott

Condition: used, Pillar Slewing Crane DEMAG Type KBK 2 Year of manufacture: approx. 1980 Load capacity: 500 kg Slewing range: 270° Jib outreach: 3200 mm Overall height: 2950 mm Jib length: 3100 mm Height to underside of jib: 2440 mm - Jib profile: DEMAG C-section rail KBK 2 - Trolley for DEMAG C-section rail KBK 2 - Base plate for crane column: L x W x H = 450 x 450 x 25 mm (4 holes Ø approx. 26 mm) Gtjdpfxoxtq Agj Admot Own weight: 350 kg Good condition

Condition: ready for operation (used), Year of construction: 1999, operating hours: 12,396 h, Clamping Unit Clamping force 4200 kN Injection Unit Screw diameter 70 mm This DEMAG Ergotech 4200-2300 was manufactured in 1998. It is a hydraulic injection moulding machine featuring a clamping force of 4200 Kn and includes a Wittmann robot. Consider the opportunity to buy this DEMAG Ergotech 4200-2300 hydraulic injection moulding machine. Contact us for more information. Application Types Gedpfxex D Hyvs Admett Injection Moulding

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST 3 -Connector: 6-core cable Gtedpfx Ajxzq Raodmot -Transport dimensions: 520/240/H140 mm -Weight: 2.1 kg

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,642 h, General Data Measurements width 1810 mm Measurements depth 6950 mm Measurements height 2213 mm Machine weight 15750 kg Injection Unit Screw diameter 45 mm Clamping Unit Gjdpfx Adox D Hntjmstt Clamping force 350 ton Media Internal cooling Yes Additional Equipment Fanuc Robot This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST 3 Gjdpfx Adsxzq Hzsmott -Connector: 6-core cable -Transport dimensions: 480/300/H130 mm -Weight: 2.1 kg

Condition: ready for operation (used), Year of construction: 2013, operating hours: 27,551 h, General Data Measurements width 1260 mm Measurements depth 6460 mm Measurements height 2100 mm Clamping Unit Clamping force 2200 kN Additional Equipment Gjdpfx Adox D Hnysmott Sepro Robot SDR 22 This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST6DZP21 -Connector: Cable see photos Godexzqx Ropfx Admstt -Transport dimensions: 660/200/H100 mm -Weight: 3 kg

Year of construction: 2019, operating hours: 17,716 h, condition: ready for operation (used), General Data Measurements width 1920 cm Measurements depth 7750 cm Machine weight 26210 kg Gtjdpox D Nx Iefx Admjt Measurements height 2410 mm This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST 6 -Connector: 16-core cable -Transport dimensions: 840/300/H120 mm -Weight: 4.7 kg Gedoxzqtzspfx Admott

Condition: ready for operation (used), Year of construction: 2013, operating hours: 17,577 h, General Data Measurements width 1460 mm Measurements depth 5370 mm Measurements height 2060 mm Gsdpfx Aex D Hnmedmjtt Clamping Unit Clamping force 1600 kN Additional Equipment Sepro Robot SDR 11 This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable Gtsdjxzqp Ajpfx Admjt -Type: DST 6 -Connector: 16-pin -Transport dimensions: 870/360/H140 mm -Weight: 6.1 kg

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,000 h, General Data Measurements width 1264 mm Measurements depth 4308 mm Measurements height 1779 mm Machine weight 4200 kg Injection Unit Screw diameter 25 mm Shot weight 46 g Gtodpfx Adjx D Eccomst Heating capacity 5.7 kW Nozzle pressure 30 kN Clamping Unit Clamping force 500 kN Max open daylight 710 mm Distance between bars 370 x 370 mm Mould height min 200 mm Mould height max 410 mm Ejector stroke 90 mm Ejector force for / back 25 kN Additional Equipment Granule Dryer Handling System Conveyor Belt - 1400 mm x 400 mm Precision Scale Temperature Units - 2x HB‑Therm This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine. Application Types Injection Moulding

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, Crane remote control switch without cable -Type: DSK3 DP1 -Transport dimensions: 520/26/H145 mm -Weight: 1.7 kg Gtedoxzqnxepfx Admot

Year of construction: 2019, condition: ready for operation (used), This DEMAG Systec 210/580-840 was manufactured in 2019. It's a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information. Gtedox D Nluepfx Admst Application Types Injection Moulding

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST 6 Godpjxzqkyefx Admjtt -Connector: 16-pin -Transport dimensions: 640/430/H120 mm -Weight: 5.6 kg

Year of construction: 2019, operating hours: 18,138 h, condition: ready for operation (used), General Data Measurements width 1920 cm Measurements depth 7750 cm Measurements height 2410 cm Gtedpfx Aox D Nxzjdmet Machine weight 25340 kg This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for tact us for more information. Application Types Injection Moulding

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, Crane remote control switch without cable Gedpfx Aexzqghodmstt -Type: DSK3 DP2 -Transport dimensions: 500/90/H120 mm -Weight: 0.8 kg

Condition: good (used), Year of construction: 1992, Column jib crane, overhead crane, workstation crane -Load capacity: 250 kg Godpfx Asd I Tnfjdmett -with chain hoist: Demag type DKUN 1-125 K V1 F4 -Projection: 2310 mm -Total height: 1900 mm -Transport dimensions: 2400/800/H500 mm -Weight: 172 kg