Used Demag Crane for sale (520)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,642 h, screw diameter: 45 mm, total height: 2,213 mm, overall weight: 15,750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information. Additional equipment • Fanuc Robot Machine Benefits Qualitative Machine Benefits • Process data acquisition, mould protection Technical Machine Benefits • Mould height min: 350 mm / mould height max: 745 mm • Main electronic connection: 3/400 v 50hz • Programmable sequence, highly dynamic feed speed, hydraulic pressure-dependent holding pressure control, digital/wear-free position measuring system. Extra Information Standard equipment: Support of the moving mould mounting platen via linear guides/ Ejector short / long stroke/ Interface for external printer (hardcopy)/ Individual axis movement optimization (activeAdjust)/ Four-stage mould closing and four-stage mould opening sequence/ Pump drive power II, increased (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3 phases + N + PE/ Mains connections drive / heating separate/ Data display coloured/ Oil cooler reinforced (cooling water supply up to 35 °C)/ Water connection for mould and machine cooling separate/ Basic version Europe/ Corrosion protection/ Dedjx D Hntopfx Am Roch Paint finish: Deep black (RAL9005): Machine bed with internals, lower switch cabinet/ Signal white (RAL9003): Clamping unit, injection unit, nozzle guard/ Signal white (RAL9003): Fixed safety devices, upper switch cabinet/ Signal white (RAL9003): Safety doors/ Textured surfaces: Elastic machine bearings/ Digital and wear-free position measuring system (ultrasound/high-resolution rotary encoders for injection, mould and ejector movement)/ Mould connection dimensions type E (according to EUROMAP March '96)/ Centring diameter fixed platen: 160 mm/ Centring diameter moving platen: 160 mm/ Without side ejector plate/ Standard mold installation height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only when safety gate is closed)/ Ejector with position control (p/F+v independently programmable, parallel to mold movement)/ Toggle lever oil lubrication/ Injection unit/ Optional equipment: Speed-controlled pump Servo Technology (activeDrive)/ Emergency stop switch on operator side/ Separate opener for ultra-fine filtering in the bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), can be disconnected via main switch/ Socket IECEE 3Ph / 400V-16A, can be switched off via main switch/ Flashing light/ Operation with safety door open (operator side)/ 6 pneumatic 5/2-way valves on movable tool plate (programmable)/ 6 pneumatic 5/2-way valves on fixed tool plate (programmable)/ Central maintenance unit for pneumatic valves/ Core pull 1-circuit via proportional valve (programmable, with non-return valves)/ Manual pressure relief for core pull 1-circuit/ Protective clothing on operator side widened (250 mm)/ Hot runner control 12 zones, integrated (2, 75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force control/ Active mold protection via sensor when closing (activeQ)/ Manually adjustable monitoring switch for mold open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with emptying option/ Holding pressure switchover dependent on hydraulic pressure (with pressure recording)/ Nozzle contact pressure when mold is open (programmable)/

Year of construction: 2019, condition: ready for operation (used), This DEMAG Systec 210/580-840 was manufactured in 2019. It's a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information. • The dosing unit (orange part) is not included. • Integrated socket combination, country-specific, • can be switched off via main switch and shutdown program • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current device • Pneumatic 5/2 valve No. 1 on movable mold clamping plate; • programmable, supplied via central air connection • includes hoses. Inputs and outputs freely programmable; 3 inputs and 3 outputs; • Terminal point outside the control cabinet • Interface for additional nozzle heating band; socket only • 2-circuit core puller via switching valve on movable mold clamping plate; Q-independent (programmable); • With pilot-operated check valves to prevent core creep Dcjdpjx D Nluofx Am Reh • Mold connection dimensions E (similar to Euromap March 96) • With side ejector plate, centering diameter of fixed platen: 160 mm • Centering diameter of movable platen: • Mold installation height increased by 100.0 mm • Min: 340 mm • Max: 790 mm

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. • 5x similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mold movement • Chromed tie bars on clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate mains connections for drive and heating • Control: color data display with VGA interface and AT keyboard interface • Injection, holding pressure, and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mold and oil cooling • Compliance: Basic version Europe, according to valid safety regulations • Painting: Bottom anthracite grey RAL 7016; Top blue 571C MD • Elastic machine mounting • Ultrasonic displacement measuring system with digital data transmission for injection, ejector, mold (WZ), and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centering diameter (D=100/125) for fixed mold platen Dodpfx Ajx D Rqrsm Rech • Mold connection dimensions type E (similar to EUROMAP), without side ejector plate • Standard mold installation height • Safety interlock: mold opening and ejector forward only with closed safety door • Ejector with position control via proportional valve; pressure and velocity independently programmable • Electric screw drive, frequency-controlled

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,000 h, clamping force: 500 kN, screw diameter: 25 mm, injection weight: 46 g, total height: 1,779 mm, overall weight: 4,200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine. Additional equipment • Granule Dryer • Handling System • Conveyor Belt - 1400 mm x 400 mm • Precision Scale • Temperature Units - 2x HB‑Therm Dcsdex D Eccspfx Am Roh Machine Benefits Technical Machine Benefits • Exceptional energy efficiency • Enhanced platen rigidity and mold safety • Fully electric direct-drive system • Ultra-precise direct-drive motors with 0. 1 ms response time • Displacement: 52 cm³ • Spray pressure: 2180 bar • Tool clamping platens: 520 x 570 mm Extra Information Control Unit Advanced control system with NC5+ Automatic mold height and clamping force adjustment Energy-saving routines Dimensions Machine Depth 4308 mm

Condition: ready for operation (used), Year of construction: 1995, operating hours: 122,158 h, clamping force: 3,300 kN, screw diameter: 60 mm, This DEMAG ET 330 - 1450 hydraulic injection moulding machine was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for various applications. The machine includes a Wittmann W322-121 linear robot for enhanced automation. Consider the opportunity to buy this DEMAG ET 330 - 1450 hydraulic injection moulding machine. Contact us for further details. • Clamping unit: • Locking force: 3630 kN • Tie bar spacing (H x V): 710 x 630 mm • Platen dimensions (H x V): 1040 x 950 mm • Mold installation height: min 330 mm / max 830 mm • Opening stroke: 675 mm • Platen distance (daylight): 1505 mm • Permissible mold weight: fixed side (DS) 1200 kg; moving side (AS) 2400 kg; total 3600 kg • Ejector: stroke 200 mm; force 80 kN; retraction force 35 kN • Core pull control: yes (2 units, on ejector side/AS) • Shut-off nozzle: yes (hydraulic/pneumatic 1/1) • Injection unit 1: • Unit code: 1450-60 • Screw diameter: 60 mm • Injection pressure: 1905 bar • Stroke volume: 763 ccm • Shot weight (PS): 695 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Max dosing stroke: 270 mm • Plasticizing flow: 41 g/s • Configuration/controls: • Armored (wear-resistant) injection unit: yes • Pneumatic ejector: yes • Process control: SPC (Yes/Yes) Dodeyg Nkwjpfx Am Rech • Printer interface: integrated • Hot runner control: 0-zone (none) • Maintenance: • Hose replacement performed in 2017 Additional equipment • Wittmann W322-121 CNC linear robot/removal device (included with the machine) • Travel paths: Y-axis 1600 mm, X-axis 500 mm, Z-axis 2500 mm

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,810 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection weight: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. It's equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine. Dsdpfx Ameyfq Alj Rsch • Locking force: 2750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mold height: 330–830 mm • Opening stroke: 675 mm • Max daylight (distance between platens): 1505 mm • Mold weight capacity: fixed side 1100 kg, moving side 2200 kg (total 3300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centering ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1351 bar • Plasticizing rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle bore: 3 mm • Max dosing stroke: 225 mm • Note: Second injection unit listed with no data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Stroke: Y (vertical) 1600 mm, X 900 mm, Z 2500 mm • Hot runner control: 9 zones • Mold sensing: Kistler pressure (p=1) / temperature (t=0) system • Valve gate control: hydraulic (pneumatic not equipped)

Year of construction: 2019, operating hours: 18,138 h, condition: ready for operation (used), overall weight: 25,340 kg, This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for tact us for more information. Dcsdpfox D Nxzox Am Roh Additional information • Screw Diameter: 50 mm • Maximum Dosing Volume: 530 cc • Cycles: 12875090 • Tiebar Spacing: 820 mm • Clamping Force: 3500 kN

Condition: good (used), Year of construction: 2008, clamping force: 500 kN, Demag Systec 50/370-120 (2008) Screw size: 18 mm tie bar distance: 370x370mm Dcsdpfxoy Eyq Ho Am Reh machine is in good working condition immediately available at our warehouse.

Condition: used, weight max. 250 kg stroke / mm Load: 250 kg Dcodpfx Ajykvbqjm Reh Chain length: 2.5 m Weight: approx. 30 kg

Condition: excellent (used), Chain Hoists - DEMAG / STAHL - 14 units: 1. Demag DKUN 10 - 2.5 t. 2. Demag PK10 - 2 t with electric travel trolley, control box, cables. 3. Demag PK 10 - 1000 kg. 4. Demag DKUN 5 - 500 kg. 5. Demag D-BE - 160 kg. 6. Demag PK 2 F - 500 kg. 7. Demag PK 2 N-F - 250 kg. 8. Demag chain hoist - 3 units: 1. Demag DKUN 2 - 250 kg. 2. Demag PK 2 N - 500 kg. 3. Demag PKVUN 1 - 125 kg. 9. Demag PK 1 N - 125 kg. 10. Demag Motor PKUN 1 - 125 / 250 kg. Stahl chain hoists: Dodpfxoyvwbwj Am Rech 1. Stahl T 405 M - 1000 kg. 2. Stahl T 302 S - 500 kg.

Condition: good (used), Year of construction: 2010, machine/vehicle number: ENOG, DEMAG KBK Overhead Crane System, approx. 8x4 m Payload / Lifting Capacity: 250 kg (0.25 t) Technical data of the system: Crane runway made from Demag KBK1 + 2 rails System is supplied complete: KBK rails, rail connectors, trolleys, end plates, cable carrier, brackets/hangers, etc. Including Demag DC-COM 250 KG chain hoist Crane is dismantled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Dcsdpfx Asmqf Nfsm Roh Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems available as well. Payloads from 125 KG to 1600 KG Please inquire for crane runway with your desired cantilever load and dimensions.

Condition: used, arm length 6000 mm weight max. in kg 250 kg swivelling range . Grad height 3800 mm Crane number 1.26 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Dedpfxsyqvcuj Am Rech If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2019, operating hours: 17,716 h, condition: ready for operation (used), General Data Measurements width 1920 cm Measurements depth 7750 cm Machine weight 26210 kg Measurements height 2410 mm This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information. Dcsdpfx Ajx D Nx Iom Rsh Application Types Injection Moulding

Condition: excellent (used), DEMAG / ABB / TELEMECANIQUE – Frequency Converters / Inverters – 11 units: 1. DEMAG Type - ACS800 04M-0140-3+D150+E210+H355+H356+H360 with resistance unit (new) – 1 unit. 2. DEMAG Type - ACS800 04M-0210-3+D150+E210+H355+H362+N672 with resistance unit (used) – 1 unit. 3. DEMAG Type - UD DPU415V024E10 – 1 unit. 4. TELEMECANIQUE Type - ATV 58ED23N4 – 15 kW (in original packaging). 5. DEMAG Type: ABB – ACS 800 – 2 units. Dsdpjyu S Alofx Am Rech 6. DEMAG Type: ABB – ACS 800 – 1 unit. 7. VACON / AC DRIVE – 3 units. 1. VACON Type: X4K40400C 2. VACON Type: XX4K440075C 3. AC DRIVE Type: X4K40075C1 8. AC DRIVE Type: X4 – 1 unit.

Condition: new, Radio remote control / joystick transmitter / transmitter / receiver: 1. Radio remote control / joystick transmitter / transmitter Type: DRC - JD2 with 4 batteries (new). 2. Transmitter type: DRC - 10 2ST D3 - 2 units (new). 3. Receiver type: DRC - MP D3 (new). 4. Circuit board type: DRC - DR D3 (new). 5. Electrical enclosure with receiver type: HBC FSE516 6. Receiver type: RC - E10 7. Radio remote control / joystick transmitter / transmitter - 2 units: Type: FSS760 - 40 Dsdpfx Aoyuy S Uom Rech Type: 716 - K 12973 8. Radio remote control / joystick transmitter / transmitter - 2 units: Type: F24 - 60 TK 9. Radio remote control / joystick transmitter / transmitter - 2 units: Type: F25 - 6D

Condition: used, functionality: unexamined, Contact us for a quote Djdpfx Amsyycihj Rsch

Condition: new, DEMAG control box / switch cabinet for hoist / wire rope hoist - DR / DMR / DH 1. Demag control box DR / DMR with frequency inverter DIC - 4 - 007 - C - 0032 - 05 Dcsdpfx Ajyut Aaom Reh 2. Demag control box / switch cabinet for DH hoist

Condition: excellent (used), functionality: fully functional, 2 units DEMAG trolley 3.2 t, complete with hoisting unit PLV168 Very good condition, ready for immediate use 1 unit for €3,600.00 net 2 units for €6,900.00 net Dcjdjwafidepfx Am Rsh DEMAG slip ring motor 36/24 S4 GÜ Fine gear FG36 19K or Fine gear 72 DFg refurbished or Hoist motor 36/24 K6P 24/14 K4P 24/10 K4P Info: 20,000 DEMAG spare parts and components in stock! demag parts warehouse

Condition: ready for operation (used), approx. 120 pieces = 480 running meters of safety conductor rails Number of conductors / number of poles: 5 in standard lengths of: 4 m Dedod Hurbspfx Am Rjch Busbar cross section: 10 mm² for mains voltage up to: 500 V Load capacity at 100% ED: 60 A Weight per meter: 2.1 kg

Condition: new, functionality: fully functional, 3 units DEMAG monorail trolleys complete, all of identical design with DEMAG hoist type DH316 H12 with hoist motor KBH140 B2/12 Gear ratio i=85 Dcsdsv Uvu Uopfx Am Roh Hook travel 6 m Main lifting speed 6.3 m/min Precision lifting speed 1 m/min Safe working load 6.3 t Reeving 4/1 Very good used condition Many hoists available from stock Info: We have over 20,000 DEMAG spare parts in stock! Also check my other listings from our warehouse stock!

Condition: new, functionality: fully functional, 80 pcs new DEMAG rope guides / rope guide crane hoist parts for DH2000 DH1000 DH500 DH300 Dcedpfx Asv T Tq Dom Roh and 30x P-Zug rope guides P200 to P1000 plus 50 brakes (e.g. new brake discs, brake pads, brake shields, brake covers) all brand new Manufacturer's original price approx. €300,000.00 Info: We have over 20,000 DEMAG spare parts in stock! Also check my other offers from warehouse stock!

Condition: excellent (used), functionality: fully functional, 15 new DEMAG crane travel motors / crane motors, some with gearboxes KBF / KBA 71 80 90 100 112 125 140 160 Very good used and tested condition Dsdpsv Uvuhefx Am Rjch Well below manufacturer's retail price Info: We have over 20,000 DEMAG items in stock! Over 20,000 DEMAG spare parts in our warehouse! Check out my other offers from my inventory!

Condition: good (used), Year of construction: 2004, Demag Concept 125/475-320 Clamping force: 125 tons Dcsdpfxsxd Sz Es Am Roh Distance between tie bars: 475 x 475 mm 2 x core pullers on movable platten \+ Robot Demag W621-1831: X-550, Y-1000,Z-2000 (2004)

Year of construction: 1995, condition: good (used), DEMAG Electric Hoist DKUN 5-500-K-V1F4 Type: Electric chain hoist Year: 1995 Chain: 3 meters Three-phase 380V Capacity: 1.000Kg 2 speeds (12,5m/min. - 6,2m/min.) Dodpfx Amjudv Tks Rjch 1.7Kw

Condition: excellent (used), 2 identical DEMAG hoists / electric wire rope hoists P625 H8 2/1, load capacity 5t, and P35 H8 2/1, load capacity 5t. Both equipped with fine lifting FG24 and 5t lower block. Both units underwent a complete general overhaul at the same time in 08/2003! Stored since then, without documentation, though the gear type plate contains the relevant information. Dsdpfxsv T Twks Am Roch