Used Dehairing Machine For Pigs for sale (91,692)

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,500 mm, table length: 4,000 mm, table width: 2,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Dsdpfxjxfiaze Adneku X-axis travel: 5,000 mm Y-axis travel: 2,800 mm Z-axis travel: 1,500 mm Table length: 4,000 mm Table width: 2,000 mm Max. table load: 20,000 kg Spindle speed: 20 – 3,000 rpm Spindle power S1 = 100%: 30 kW Spindle power S3 = 60%: 35 kW Max. spindle torque: 1,250 Nm at 226 rpm Tool holder: ISO SK50 Number of tool changer positions: 100 Milling Head Automatic milling head: Index 2.5° Straight milling head: Index 1.0° Feed Rate Working feed rate: 2 – 5,000 mm/min Rapid Traverse X-axis: 12,000 mm/min Y-Z-axis: 15,000 mm/min MACHINE DETAILS Control: HEIDENHAIN TNC426CB Dimensions (L x W x H): 9,800 x 6,200 x 7,100 mm Machine weight: approx. 31,600 kg

Condition: ready for operation (used), Year of construction: 1998, operating hours: 30,430 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, punching diameter: 76 mm, TECHNICAL DETAILS Pressing force: 220 kN Maximum sheet thickness: 6.4 mm Punching diameter: 76.2 mm X-axis travel: 2,500 mm Y-axis travel: 1,250 mm Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed (simulation): 108 m/min Positioning speed rotary axis: 360 °/sec Workpiece weight: 150 kg Smallest programmable increment: 0.01 mm or 0.01° Tool stations: 15 units Tool change time: 1.5 - 6.5 sec MACHINE DETAILS Dimensions & Weight Dsdpfx Adsxhfu Hensku Dimensions: 6,400 x 5,800 x 2,100 mm Approx. machine weight: 11,050 kg Operating hours: 30,430 h

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 10108, grinding wheel diameter: 100 mm, grinding length: 100 mm, center width: 100 mm, grinding spindle speed: 18,000 rpm, spindle speed (max.): 250 rpm, TECHNICAL DETAILS Grinding headstock Feed: X1 axes (CNC-controlled) Feed: Z1 axes (CNC-controlled) Grinding spindle (I) Feed: X2 axes (CNC-controlled) Feed: Z2 axes (CNC-controlled) Grinding spindle (II) Feed: X3 axes (CNC-controlled) Grinding spindle (I + II) Flange: Ø 52 mm Standard collar: Ø 32 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 12 kW Speed control: with frequency converter Max. speed: 18,000 rpm Balancing: electronic Grinding wheel (grinding spindle I + II) Type: Borazon (CBN) ceramic bonded Diameter: Ø 100 mm Bore: Ø 32 mm Grinding wheel coating width: max. 20 mm Circumferential speed: max. 125 m/s Cam piece Workpiece rotation diameter: max. 80 mm Clamping length: max. 100 mm Grinding length: max. 100 mm Workpiece weight: max. 0.5 kg Workpiece spindle Design: fixed with integrated infeed/outfeed movement Stroke: 50 mm Workpiece spindle Dimensions: Ø 210 x 700 mm Flange: Ø 180 mm Standard collar: Ø 127 mm Lubrication: oil lubrication Set air pressure: see chapter 5.3.1 Drive: with servo motor, C1 axis (CNC-controlled) Speed max.: 250 rpm Tailstock Longitudinal adjustment: manual via gear Tailstock quill Live center: mounting hole Ø 20 mm Clamping force: adjustable via pneumatics Dimensions: 50 x 80 x 178 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Grinding stock Design: fixed Steady rest Type: GR - 115 Diameter range: Ø 45 - Ø 60 mm Set air pressure: see chapter 5.3.1 Profiling of the grinding wheel Fine dressing: circumference and face with diamond wheel, mounted on the dressing spindle Circumferential dressing: Ø 110 mm Dressing spindle Dimensions: Ø 80 x 250 mm Flange: Ø 100 mm Standard collar: Ø 75 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 5.3 kW Dsdjxf Ak Tepfx Adnjku Speed control: with frequency converter Max. speed: 30,000 rpm MACHINE DETAILS Installation dimensions: 8,935 x 5,956 x 3,437 mm Weight: 24 t Connection power: 87 kVA

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, edge thickness (max.): 20 mm, plate thickness: 60 mm, controller model: IMATRONIC 121/01, TECHNICAL DETAILS Edge thickness, coil: 0.3 – 3 mm Edge thickness, strips/sheared pieces: 0.8 – 20 mm Panel thickness: 8 – 60 mm Motorised chain feed from below (variable): 6 – 30 m/min MACHINE DETAILS Electronic control: IMATRONIC 121/01 EQUIPMENT Levelling unit with NC adjustment 08.376: (4.5 kW × 2 at 9,000 rpm) Edge heating lamps: 1.5 kW × 2 Glue unit 283.1513: (hot-melt glue + preheater) with NC adjustment Glue unit 08.42: (0.66 kW × 2 at 12,000 rpm) Profiling group 08.0555: (1.85 kW × 2 at 12,000 rpm) Multifunctional unit 08.348: (0.66 kW × 2 at 12,000 rpm) Corner copy routers 08.519 Glue scraper group 08.50 Brushing unit 08.612: (0.25 kW × 2 at 1,500 rpm) Unit 08.181: (4.4 kW × 1 at 6,000 rpm) Belt sanding unit 08.062: (1.8 kW × 1 at 3,000 rpm) Upper pressure system with motorised rubber belt Entry fence with NC adjustment Dedexf Ewvopfx Adnsku Pressure zone Roll holder with 1 roll Automatic end trimming tool change (cross system)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1703, The SEAC FPM-400 combines the SEAC FPM-200 and SEAC FPM-350! The machine has been upgraded with additional equipment (see equipment)! TECHNICAL DETAILS Productivity: 150–320 pieces per minute MACHINE DETAILS Operating hours: 672 h Djdpsxd Ubzofx Adneku EQUIPMENT Spare parts Belt system converted from timing belt to V-belt Pump for water pressurization Comb installed at the fish fillet outlet

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00049781, workpiece diameter (max.): 50 mm, spindle diameter: 69 mm, spindle speed (max.): 5,000 rpm, working stroke: 130 mm, roll spacing: 255 mm, TECHNICAL DETAILS Contact surface: 180 mm Workpiece diameter: 4 - 50 mm Rolling pressure (infinitely variable): 0-200 kN Feed (infinitely variable): 0-50 mm/s Rolling cycles per minute: 0-86 Dkjdpfsxbfwzex Adnju Rolling spindles Rolling spindle diameter: 69.85 mm Distance between rolling spindles: 125 - 255 mm Spindle mounting length: 160 mm Traverse of the rolling spindle slide: 130 mm Rolling spindle speed: 3000-5000 rpm Rolling tool diameter: 130 - 200 mm Machine bed height: 800 mm Height of rolling spindle above machine bed: 160 mm MACHINE DETAILS Control system: SIEMENS SIMATIC C7 Voltage: 400 V, 50 Hz Dimensions & Weight Machine height: 1,600 mm Weight: 2,400 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 94,936 h, controller manufacturer: Siemens SINUMERIK 80 D, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 100 m/min, TECHNICAL DETAILS Working Area X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 600 mm B-axis: ±135° C-axis: n × 360° Speeds X / Y / Z axis: 100 m/min B / C axis: 540 °/s Acceleration Simultaneous: 17.3 m/s² Dkedsxlctzjpfx Adnsu X / Y / Z axis: 10 m/s² B / C axis: 200 | 100 rad/s² Maximum Positioning Accuracy Linear axes X / Y / Z: 0.03 mm Rotary axes B / C: 0.005° Maximum Positioning Deviation Linear axes X / Y / Z: 0.08 mm Rotary axes B / C: 0.015° MACHINE DETAILS Laser type: Solid-state laser TruDisk 3001 Laser output: 3,000 W Cutting gas: Nitrogen Control: Siemens SINUMERIK 80 D Operating Hours "Laser On" hours: 94,936 h Operating hours: 99,293 h EQUIPMENT Magnetic coupling Dynamic cutting optics with f = 150 mm FocusLine FastLine Cell ObserveLine Rotary changer D = 4,000 mm including safety backing Scrap conveyor 4× configurable control interface Valve terminal for 8 pneumatic clamps per side 2× load status indicator for rotary changer Extended compressed air supply on equipment panel including vacuum ejectors Cutting gas: compressed air Renishaw touch probe Measuring head (without probe) Measurement data processing 3× horizontal fixture interface Extraction ducting Protective enclosure for rotary changer including safety device, 1 window and column for control panel Status signal light (top & bottom) Video monitoring with camera Monitor mount Special installation Cooling unit KLH

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,500 mm, TECHNICAL DETAILS Dkjdpfx Adsxhfnaonsu Working area: 3,000 x 1,500 mm Max. punching force: 220 kN Max. sheet thickness: 6 mm MACHINE DETAILS Dimensions & Weight Dimensions: 7,500 x 7,500 x 2,500 mm Approx. machine weight: 17,500 kg

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, table bore: 80 mm, table diameter: 145 mm, gear diameter: 125 mm, controller manufacturer: Siemens, controller model: SINUMERIK 840 D, TECHNICAL DETAILS Maximum wheel diameter: 125 mm Maximum module: 3 Maximum gear width (spur gears): 24 mm Center distance: -25 to +180 mm Maximum swivel angle: 12° Maximum helix angle: 45° Table Table diameter: 145 mm Table bore: 80 mm Infinitely variable table speed: 0.03 – 50 rpm Shaper spindle Stroke rate (double strokes): 1,500 – 3,000 DS/min Stroke position adjustment: 70 mm Stroke length min./max.: 0 – 30 mm Shaper spindle diameter: 85 mm Cutter holder mount: HSK 80 B Tool and workpiece Tool number of teeth: 1 – 200 Minimum tool module: 0.05 Workpiece number of teeth: 1 – 1,500 Minimum workpiece module: 0.05 Control Control: SINUMERIK 840 D MACHINE DETAILS Electrical data Drive power: 7.5 kW Total power requirement: 30 kVA Weight and dimensions Dkodpfxjxf Azxe Adneu Machine weight: approx. 8 t Space requirement: approx. 4.3 × 2.8 × 2.9 m EQUIPMENT Swiveling counter-holder with 4 positions Automatic workpiece changing device Linear workpiece conveyor

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, center height: 225 mm, controller model: Fanuc 16T, TECHNICAL DETAILS Centre height: 225 mm MACHINE DETAILS Dsdpexlix Dofx Adnsku Control: Fanuc 16T

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available Dkjdsxg Ix Sjpfx Adneu - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, laser power: 4,000 W, table length: 1,500 mm, table width: 3,000 mm, Equipment: cooling unit, No minimum price – guaranteed sale to the highest bidder! The machine was serviced in 2022 by an Amada specialist. The service protocol can be found attached to this listing! TECHNICAL DETAILS Dkodpfx Adsxgg Irsnou Laser power: 4 kW Table width: 3,000 mm Table length: 1,500 mm EQUIPMENT Ridel chiller Donaldson extraction unit 2 exchange tables

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, net weight: 1,720 kg, operating speed: 10,700 mm/s, roller width: 2,200 mm, TECHNICAL DETAILS Rigid material Workpiece height: max. 50.8 mm Workpiece weight: max. 34 kg/m² Roll material Width: min. 900 mm – max. 2,200 mm Weight: max. 50 kg Diameter: max. 240 mm Maximum print speed: 64.2 m²/h (in express mode) MACHINE DETAILS Dimensions & Weight Dimensions: 3,080 × 2,500 mm Weight: 1,720 kg Note: The machine heads must be replaced. The seller can offer full service in this regard. The machine will be available from 02.12.2025! Dsdpoxdiyfjfx Adnoku

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Features of Gala Underwater Pelletizing Systems • Die-Face Cutter: Utilizes a die-face cutter where molten polymer strands are cut directly at the die face, ensuring uniform pellet sizes tailored to customer specifications. • Centrifugal Dryer: Equipped with a centrifugal dryer that efficiently removes moisture from the pellets, eliminating the need for extended drying times. • Compact Design: The system's design eliminates the requirement for long water tanks, allowing for a more compact footprint and flexible layout in production facilities. Dksdpjwm Nq Eefx Adnou • Ease of Operation: Designed for stable and continuous production, the system offers excellent operability, enabling a single operator to manage multiple lines effectively

Year of construction: 2011, operating hours: 3,700 h, condition: ready for operation (used), General Data Measurements width 2515 mm Measurements depth 5461 mm Measurements height 2286 mm Machine weight 9200 kg Control Unit Brand FANUC Model 0i-TD Main Drive Spindle speed range 2000 Spindle bore 137 mm Number of axis 2 Tools Number of station 12 This DOOSAN PUMA 400MB horizontal turning machine was manufactured in 2011. It features a max turning diameter of 21.7", length of 38.5", and a spindle speed up to 2,000 RPM. Equipped with Fanuc Oi-TD CNC control, live tooling, and a high-pressure coolant system. Consider the opportunity to buy this DOOSAN PUMA 400MB horizontal turning machine. Contact us for more information about this machine. Djdpfx Adjxlva Usnsku Application Types Turning

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 26BB2444, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Electrical Data Dkodsxliwyjpfx Adnju Connection: 380 V / 50 Hz Rated power: 10 kVA Fuse rating: 25 A Control voltage (AC): 220 VAC Control voltage (DC): 24 VDC EQUIPMENT Coolant tank

Condition: good (used), Year of construction: 2006, Ref:10979 . 2006 Heidelberg Stahl TH82/64K-RFH 16pp High performance all buckle folding machine with computerised auto set-up of fold plates & rollers. Comprising; • RFH82 continuous loading round pile feeder with air stream table designed for high run lengths • With low operator strain, double wheel suction head for wide format sheets. • Digital microprocessor control with touch screen display for automatic setting of fold plates and roller pressures with learning function for signature length, suction & spacing with run monitoring, integrated total and batch counter with memory. • Touch-screen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. • Setting adjustments can be made outside the machine ‘on the fly’. • Sound hoods covering all buckle units. • SBP.D presser/stacker delivery unit. Including compressor, tools, spares & manuals. Accessories: Dsdpjwxw Snofx Adnoku Electronic gate-fold plate with control unit (to be confirmed). VFZ mobile electronic ‘Z’ knife 32 page fold unit. Folding sequence: 1st buckle unit - 82cm with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - 66cm with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - 56cm with 4 plates, perforating/scoring shafts VFZ mobile electronic knife fold. Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Min: 14 x 18 cm Fold length, Min: 6 cm Mechanical speed : 50 - 230 m/min Folding production : Max. Buckle 50,000 s.p.h. Option of: 2010 Palamides Alpha 500 Plus Presser/Stacker

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 3000 x 1300 x 2000mm, Table 2000 x 1600mm, table load 13,000 kgs, B axis 360 degrees, Heidenhain iTNC530, ISO SK50 spindle taper, 5,000rpm Spindle Speed, Dkjdpfjvz A Rijx Adneu 60 station toolchanger, coolant, Interlocked guards.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 50300315, product height (max.): 15 mm, product width (max.): 305 mm, product length (max.): 210 mm, paper weight (min.): 50 g/m², paper weight (max.): 200 g/m², TECHNICAL DETAILS Insert Length: min. 100 mm – max. 210 mm Width: min. 150 mm – max. 305 mm Dksdpfsxdii Hsx Adnju Weight: min. 50 g/m² – max. 200 g/m² Product height: max. 15 mm Envelope Length: min. 105 mm – max. 230 mm Width: min. 162 mm – max. 341 mm Flap width: min. 25 mm – max. 70 mm Speed: max. 15,000 envelopes/h MACHINE DETAILS Printed labels: 798,538 pcs Note: The machine will be available from 02.12.2025!

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, total length: 2,420 mm, total width: 1,090 mm, total height: 1,800 mm, overall weight: 1,035 kg, input voltage: 400 V, type of input current: AC, power: 4.5 kW (6.12 HP), year of last overhaul: 2023, frequency: 50 Hz, discharge height: 975 mm, nominal voltage: 400 V, Machine in good working order, with additional linker unit Dodpexftrzofx Adneku

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 22207, Marinus Machines V&G 400 Series,Through Feed End Matching Machine,Serial Number 22207, Year of Manufacture 2000 In very good working condition. Maximum working length up to 6m, minimum working length: 500m/m Dedpfx Aev Er Nijdnjku Minimum working width: 50m/m, normal maximum width: 280m/m, 300m/m is possible with some adjustment of the tools. Total Power: Appr: 20kw, Feed Speed up to 20 pieces per minute,depending on length. Omron PLC Controls. Floor Size: W x D x H 2000 x 1650 x 1900m/m, Weight: Appr. 1750kg. Also with the machine is a 3m. Long Belt Conveyor, which could be used at the Infeed or Outfeed of the machine. Complete Safety Enclosure. With Operational & Electrical Manual. Location: Can be viewed in Burrowbridge,Somerset TA7 0SG Photos Available on your email or Mobile Phone WhatsApp.

Condition: good (used), functionality: fully functional, type of input current: AC, Pee-Wee Model P24US Hydraulic Thread Rolling Machine for in-feed or thru-feed rolling with helical thru-feed dies Max. rolling pressure: 24 tons Max rolling diameter: 75mm Min rolling diameter: 5mm Max rolling width: 200mm Diameter of rolling spindles: 69.85mm Djdpfx Ajxl Ebhsdneku Max thread die diameter:210mm Variable spindle speeds: 20 -90 rpm

Condition: excellent (used), Year of construction: 2017, operating hours: 6,000 h, Ref: 11015 . 2017 Heidelberg Stahl BUH 56/44-FP Excellent condition - ONLY 6,000 hours worked! B2 size buckle folder, 8pp+ with auto setting. Equipped with: Flat pile feeder with Tremat suction head Touch screen control for auto set-up Auto setting of buckle plates & rollers Dsdpexlc Acofx Adneku 2 x buckle units with 4+4 plates Anti-noise hoods SPH-70 stream delivery with pressing. Folding configuration: Buckle unit 56 cm with 4 plate folds, perforating/scoring shaft Buckle unit 56 cm with 4 plate folds, perforating/scoring shaft Specification: Sheet size, Max: 56 x 90 cm Min: 14 x 18 cm Fold length, Min: 4 cm Paper weight 40-250 gsm Mechanical speed, Max: 9,000 sheets/hr. Folding production, Max: 200m/min.(buckle unit) Option of: 2010 Palamides Alpha 500 Plus Presser/Stacker

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, operating hours: 1,990 h, laser power: 12,000 W, sheet thickness steel (max.): 30 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,580 mm, travel distance Z-axis: 100 mm, Bystronic ByStar Fiber 3015 Dynamic Edition F12000 from year of manufacture 2023 with only 1,990 cutting hours! Original machine price was approximately GBP 767,000! TECHNICAL DETAILS Travel X-axis travel: 3,100 mm Y-axis travel: 1,580 mm Z-axis travel: 100 mm Maximum Sheet Thickness (Cutting) Steel: 30 mm Stainless steel: 30 mm Aluminium: 30 mm Brass: 15 mm Copper: 12 mm Positioning Speed Maximum positioning speed (X/Y parallel): 120 m/min Maximum simultaneous positioning speed: 170 m/min Positioning Accuracy Bilateral axis repeatability (R): 0.025 mm Mean bilateral axis positioning deviation (M): 0.05 mm Edge detection accuracy: ±0.5 mm Workpiece Weight Maximum workpiece weight: 1,100 kg Maximum workpiece weight on both shuttle tables: 1,850 kg Table Change Time Shuttle table changeover time: 25 s MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,150 x 6,000 x 3,200 mm Machine weight: 11,000 kg Laser Source Laser source: Fiber 12000 Power: 12,000 W Adjustable range: 1,200–12,000 W Wavelength: Fiber Consumption Total power consumption (incl. exhaust, cooler): 27 kW Operating Hours Cutting hours: 1,990 h Dsdjxlcz Ejpfx Adnjku Power-on hours: 13,428 h EQUIPMENT Detection Eye BeamShaper NCT & KerfScan 2nd high-pressure cutting gas channel Prepared for N2 generator Internal dust extraction system Electrical cabinet position: top (mezzanine structure not included) Note: The machine has already been dismantled, is in storage, and is no longer connected to power.

Condition: used, Year of construction: 2009, Ref:10924 . 2009 Heidelberg Stahl KH82/4KL-PFH Combination Folder. High performance digital folding machine with computerised auto set-up. Comprising: • PFH82 pallet loading pile feeder designed for medium to high run lengths with low operator strain, laser guided positioning of the stack, double wheel suction head for wide format sheets. Max. pile height 1.2 metres. • Sheet ejection facility with contactless double sheet detection for continuous high- speed running and instant problem detection to minimise paper wastage. • Digital microprocessor control with touch screen display for automatic setting of fold plates & rollers. • DAC total & batch counter with memory • BUH-82 Buckle station • CAH-82 Cross-fold station • Single sound hood covering buckle unit and knives • (2000) SBP66 Presser-stacker delivery unit. Including compressor, tools, spares & manuals. Dedpfx Ajvzyzrodnoku Folding sequence: 4 Parallel plates in the first unit with pre & post slit/score shafts 1st knife at 90° with slitter shaft 2nd knife to the left of first knife. Specification: Sheet size, Max : 82 x 120 cm Min : 14 x 18 cm Fold length, Min : 6 cm Mechanical speed : 50 - 230 m/min Folding production : Max. Buckle 50,000 s.p.h. Option of: 2010 Stahl VFZ 52 Knife folding unit. Mobile electronic 32pp knife fold unit. Additional Price: EUR 9,000 LOT.