Used Deckel Maho Dmc 80 U for sale (345)

Condition: used, Year of construction: 2000, operating hours: 27,825 h, functionality: unexamined, machine/vehicle number: 1093 0001613, Equipment: documentation/manual, used DMU 80 TNC 430. According to photos Hedpfot Skhyex Ac Tet Without tools or vice complete operating instructions Reviewed annually. Bought used. 1-shift operation Always avaliable

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm Hjdjzc Dziopfx Ac Tet - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Year of construction: 2005, condition: used, X-axis: 500mm, Y-axis: 450mm, Z-axis: 400mm, swivel rotary table dimensions: 630x500mm, max. table load: 200kg, swivel range: -5 to 110°, continuously variable speed: 20-10,000/min, drive power (100%/40% duty cycle): 9kW/13kW, torque (40% duty cycle): 82Nm, input resolution: 0.01mm, positioning tolerance: 0.010mm, rapid traverse: 24m/min, feed speed: 20m/min, number of SK40 tool positions (DIN 69871): 30, tool diameter (speed-dependent): D80-D130, max. tool length: 290mm, max. tool weight: 6kg, connected load: 17kW, control: Siemens 840D Powerline ShopMill, length: 4860mm, width: 4350mm, height: 2424mm, transport dimensions: 2210x2120x2150mm, weight: 4.05t, operating hours power-on time: 35,880h, spindle hours: 9609h. Equipment: digital drive and hydraulic clamping (positioning operation only), electronic angle display and plane transformation, chain magazine with double gripper, additional cabin door on the right, 80l coolant system, coolant/compressed-air switching, flushing gun, oil pan drawing, MDE interface (machine on, machine running, piece counter), documentation in German, 3D machine model for kinematic simulation in the CAM programming system (IGES, STEP format), numerous SK40 tool holders (DIN 69871), Heidenhain TS641 infrared touch probe, electronic handwheel, additional V24 RS232 interface on the control cabinet. An on-site inspection is possible. Hjdozxr Rcjpfx Ac Tet

Condition: good (used), Year of construction: 2006, Parts shown by hand not come. Hodpfszk U Unox Ac Tet Machine is in good working condition.

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, With Heidenhain iTNC 530 CNC control Year of manufacture: 2004 Travel paths: X 800 Y 600 Z 700 Spindle speed range: 0 – 12,000 rpm, stepless (SK 40) Including the following accessories: NC rotary tilting table Ø 630 mm Swivel milling head (horizontal + vertical) Hsdeym Rnkopfx Ac Tjt Universal tool changer with 60 magazine slots as double gripper (SK 40) Full safety enclosure with sliding doors and interior lighting 50 pcs. SK 40 tool holders ICS – 40 bar Chip conveyor Rotoclear 3D measuring probe Heidenhain Electronic handwheel Operating modes 3 + 4 3 height-adjustable machine feet Operating manuals THE MACHINE COMES FROM AN INSTITUTE AND IS IN EXCELLENT CONDITION!! POWER-ON HOURS: 29,496 hrs. PROGRAM HOURS: 10,050 hrs.

Condition: used, Year of construction: 2009, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, Offered here is a used machining center from the manufacturer Deckel Maho DMG. The machine is powered up and can be inspected at our facility. Free loaded on truck Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control: Siemens 840 D Solutionline (PCU 50) Technical data: Travel distances X-, Y-, Z-axis: 1250 x 1000 x 1000 mm Feed rate X-, Y-, Z-axis: 20 - 60,000 mm/min Rapid traverse X-, Y-, Z-axis: 60 m/min B-axis travel: 360 x 0.001° B-axis feed rate: 10,800 °/min Max. rotation of table plate: 30 rpm Spindle speed: 20 - 8,000 rpm Gear stages: 2 Max. workpiece diameter: 1250 mm Max. workpiece height: 1580 mm Clamping surface: 800 x 800 mm Max. workpiece weight: 1,500 kg Weight of pallet: 570 kg Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Max. tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of machine (without magazine or other accessories): approx. 20,000 kg Space requirement: approx. 7,000 x 6,000 mm Total machine weight: 24,000 kg Accessories: Chip conveyor with coolant tank Coolant system Hodpfx Ajw Ew T Sjc Tjt 4x machine pallets Tool magazine Oil mist extraction Various new spare parts: 1x Length measuring system Y-axis (new) 1x Lubrication unit 230V 0.12 30 bar (new) 1x ZAHNRADP-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox *F1C-A25 (new) 1x Conversion kit power module (new) 1x Lifting devices for the machine

Condition: used, Year of construction: 2008, Technical details: x-travel: 700 mm y-travel: 700 mm z-travel: 700 mm turning speeds: 18.000 1/min max. torque on the spindle: 110 / 84 Nm tool taper: SK 40 control: HEIDENHAIN iTNC 530 tool change unit: 180 fach size of pallet: 500 x 500 mm mm max. workpiece weight: 600 kg spindle: 34 / 28 kW rapid traverse: 60 m/min total power requirement: 68 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: 9,5 x 7,5 x 3,4 m horizontal machining center with linear drives,, NC-roundtable, pallet pool RS 10 for totally 12 pallets, monitor for workpiece setting-up device, high pressure coolant through spindle 40bar, internal air blast supply, Hodjy E Np Sopfx Ac Tst mode 4, hydraulic clamping 2/4 for workpiece setting-up device and working table, BLUM laser, oilmist suction, 3D touch probe TS 649, tool-breackage control, mechanical, SDS spindle diagnosis system, flush gun, el. handwheel, chipconveyor, approx. 112.000 h "machine on", approx. 79.500h "spindle on", *

Condition: used, Year of construction: 2003, x-travel 1.600 mm y-travel 1.250 mm z-travel 1.000 mm size of pallet 1.000 x 1.250 mm control SIN840D power capacity at 40 % load 38,00 KW spindle turning speed - stepless 20 - 10.000 U/min power capacity at 100 % load 25,00 kW max. torque at 40% / 100% load 288 / 187 Nm tool taper SK50 feed X/Y/Z/-axis 20 - 15.000 mm/min rapid traverse X/Y/Z 60,00 m/min B - axis -150° / +80° x 0,001 ° feed B-axis 3.600 ° / min C-axis 360 x 0,001 ° Rapid motion C- axis 1 - 3.600 U / min. table load 3.000 Kg tool magacine with 240 tool diameter 110 mm wotkpiece diameter with 2 vacant positions 250 mm tool length - max. 650 mm weight of tools max. 15,00 kg total power requirement 75,00 kW weight of the machine ca. 55,00 t dimensions of the machine ca. 12,50 x 8,00 x 4,20 m 5-axis machining center with control SIEMENS Sinumerik 840D incl. ShopMill electronical handwheel operating mode 4 240-position tool magazine 4-position pallet storage system TS641 measuring probe BLUM laser coolant system coolant through the spindle chip conveyor coolant cooling Machine can be inspected under power Hedpszpbfdofx Ac Tet

Condition: excellent (used), Year of construction: 2004, Deckel Maho DMC 60U hi-dyn 5-axis Control: Heidenhain iTNC 530 Spindle speed range: 12,000 rpm Spindle bore: SK40 Number of axes: 5 Travel path: X-axis travel: 600 mm Hedpfsv Rvp Dex Ac Tjt Y-axis travel: 700 mm Z-axis travel: 600 mm Table: Outer length: 630 mm Outer width: 500 mm Internal cooling: Yes, with paper belt filter Blohm tool sizing system Cooling pressure: 40 bar Machine equipped with two 650 x 500 mm pallets Machine equipped with 120 tool holders

Condition: used, Year of construction: 2008, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Siemens 840D powerline spindle tunring speed 8.000 U/min drive capacity - main spindle 100/40% ED 32/44 kW tool taper HSK-A 100 number of tool places 354 Pos. rapid traverse ( x / y / z ) 60 m/min size of pallet 800 x 800 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features: - NC rotary table with pallet carrier - Rotary pallet changer - 40 bar internal coolant supply - Rotating viewing window - Wall-mounted magazine with 300 magazine positions - Rotating wall tool lock, 30 positions (inactive) and 54 positions (active) - Infrared measuring probe - SK 50 mechanical tool breakage detector - Tool identification - 4-color signal lamp Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as Hedpfxexcp R Ue Ac Tot subject to prior sale!

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, Equipment: chip conveyor, DECKEL MAHO DMC 1035 V – Vertical Machining Center – Year of Manufacture 2007 For sale is a DECKEL MAHO DMC 1035 V CNC machining center in well-maintained condition. Technical Data Hsdpfx Acozkmq Is Tst * Manufacturer: DECKEL MAHO * Model: DMC 1035 V * Year of Manufacture: 2007 * Control System: Heidenhain iTNC 530 * Travels (X/Y/Z): 1,035 × 560 × 510 mm * Table Size: 1,200 × 560 mm * Max. Table Load: 1,000 kg * Tool Holder: SK40 * Spindle Speed: up to 10,000 rpm * Tool Magazine: 30-position * Rapid Traverse: up to 30 m/min * Machine Weight: approx. 4,500 kg * Electrical Connection: 400 V / 50–60 Hz * Power Consumption: 22 kVA Equipment * ✅ Heidenhain iTNC 530 CNC control system * ✅ Electronic handwheel * ✅ Tool changer * ✅ Coolant system * ✅ Direct path measuring systems * ✅ Made in Germany The machine impresses with its robust design, high precision, and reliability. It is ideal for single-part and series production, as well as for demanding milling operations. Location: Germany Free loading.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 6,328 h, functionality: fully functional, machine/vehicle number: 11180000573, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,250 mm Travel range Y-axis: 880 mm Travel range Z-axis: 800 mm C-axis indexing: 360° (0.001°) Feed rate: 40 m/min Rapid traverse: 40 m/min Number of pallets: 1 Pallet dimensions, diameter: 1,000 mm Max. workpiece weight: 1,000 kg Max. torque: 7,900 Nm Max. spindle speed: 18,000 rpm Spindle drive power: 15 kW at 40% duty cycle Spindle drive power: 10 kW in continuous operation Tool interface: CAT 40 Number of tool positions in the magazine: 60 Tool changer: Double gripper MACHINE DETAILS CNC control: 3D contouring control MillPlus Total power consumption: 55 kVA Coolant tank capacity: 600 l Dimensions (L x W x H): 7,000 x 3,500 x 3,902 mm Operating hours Hours under power: 33,831 h Spindle operating time: 6,328 h EQUIPMENT Electronic handwheel Hedpfx Aszxf Inec Tet Chip conveyor Internal coolant supply Rotating viewing windows Flushing gun Preparation for Renishaw probe Accuracy package Preparation for internal cooling with 40/80 bar Paper band filter

Condition: ready for operation (used), Year of construction: 2000, operating hours: 28,027 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain Mill Plus, spindle speed (max.): 18,000 rpm, Vertical machining center with a virtually new spindle (the machine received a new spindle after 23,919 operating hours)! TECHNICAL DETAILS Travel in X-axis: 800 mm Travel in Y-axis: 700 mm Travel in Z-axis: 600 mm Spindle Spindle speed: 18,000 rpm Tool interface: HSK 63 MACHINE DETAILS Internal coolant supply: 40 bar Control system Control system manufacturer: Heidenhain Control system model: Mill Plus Spindle operating hours: 28,027 h Spindle replacement at: 23,919 h EQUIPMENT NC rotary table with C-axis NC swivel head Hedpfx Aszqfvisc Tst FD function (feed forward) Pallet changer Infrared probe for workpiece measurement Additional magazine with 120 positions

Condition: good (used), Year of construction: 2012, Ref. -No.: 10659 Manufacturer: DECKEL MAHO Hjdpfx Acjzw Tw Ue Tjt Type: DMC 835V Year of construction: 2012 Type of control: CNC Control: Haidenhein iTNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 1541XXX X-Travel: 835 mm Y-Travel: 510 mm Z-Travel: 510 mm Number of T-slots: 5 Max. Tool Weight: 6 kg Max. Tool Length: 250 mm Max. Tool Diameter: 80 mm Tool change time: 1,6 s T - groove width: 14 mm T - slot spacing: 100 mm Tool Taper: SK40 Numbers Of Tools In Magazin: 30 Spindle Speed: 12000 RPM Max. Torque: 130 / 87 Nm Turning Speed Range - Stepless: 30 mm / min Total Power Requirement: 35 kW Dimensions Of The Machine Ca.: 4,5 x 3,5 x 2,7 m Weight Of The Machine Ca.: 5 t Changeover time chip - chip: 6 sec Feed rate: 1 - 20.000 (X / Y / Z) High pressure cooling: 20 bar Further information: The machine can be inspected while powered on by prior arrangement.

Condition: used, Year of construction: 2008, x-travel 800 mm y-travel 800 mm z-travel 800 mm Control iTNC 530 Heidenhain Max. rpm 18.000 min/-1 Hedpfjukwatex Ac Tjt power capacity - main spindel 28 / 19 kW max. Torque 121 / 82 Nm tool taper HSK-A63 swivellable B: 0 - 190 ° swivle time 1,2 s table diameter 900 x 700 mm max. table load 1.400 kg rotatable C: 360 ° number of toolpositions 40 pos. tool taper HSK-A63 change-time chip to chip ca. 5,0 sec rapid traverse ( X / Y / Z ) 60 m/min rapid traverse B: 30 m/min rapid traverse C: 30 m/min feed speeds max. 60.000 mm/min total power requirement 64 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 6,5 x 6,5 x 3,5 m 5 Axis CNC-Machiningcenter Universal DECKEL MAHO - DMU 80 P duoBLOCK - 5-Axis - Swivel-Milling-Head - Rotary-Table

Condition: used, Year of construction: 1998, x-travel 600 mm y-travel 700 mm z-travel 600 mm Control Siemens type Millplus Table dimensions 630x500 mm tool taper ISO 40 Cooling through the spindle 40 bar Tool changer 60 Pos. no. of tables 2 Milling head automatically swivels horizontally/vertically Hodpfxsyutv Te Ac Tet The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2007, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain Hodpfeyaci Tsx Ac Tst turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A 63 swivellable B: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg rotatable C: 360 ° number of toolpositions 2x16 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm feed speeds max. 30.000 mm/min rapid traverse 30 m/min total power requirement 48 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,6 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Achse)

Condition: excellent (used), Year of construction: 2007, operating hours: 32,947 h, functionality: fully functional, Deckel Maho DMC 100H duo Block About the machine: Very robust machine. The main spindle was renewed in 2023. Technical Data: Hsdpfxeyhwqme Ac Tst - Control: Siemens 840D - Travel range X, Y, Z axis: 1000/1000/1000mm - C-axis travel range: 360° - Clamping surface rotary table: 800x800mm - Rapid traverse: 60 m/min - Spindle speed: 20-12,000 rpm - Tool holder: SK50 - Tool magazine with 60 slots - Network connectivity - Automation interface possible Equipment: - Through-spindle coolant 50 bar with belt filter system - Work area flushing - Rinse gun - Chip conveyor An inspection or test under power on site is of course possible. We are happy to offer you transportation, installation, and commissioning of the machine at your site. All from a single source: We, Baumgärtner CNC GmbH, are a company specializing in: - Service - Maintenance - Overhaul - Automation of DMG machines and those of other renowned manufacturers. We support you! From purchasing your machine, through transport and installation, to commissioning and subsequent maintenance or repair work—you can count on us.

Condition: ready for operation (used), Year of construction: 1994, spindle motor power: 28,000 W, spindle speed (max.): 12,000 rpm, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, total height: 2,700 mm, total width: 4,500 mm, overall weight: 11,700 kg, product length (max.): 4,500 mm, number of axes: 3, This 3-axis DECKEL MAHO DMC 60 U was manufactured in 1994. It features impressive X, Y, and Z-axis travels of 600 mm, 700 mm, and 600 mm respectively, along with a maximum spindle speed of 12,000 rpm. The machine includes a robust table size of 630 x 500 mm and a maximum workpiece weight capacity of 800 kg. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 60 U mill-turn centre we have for sale. Contact us for further details. • Rapid traverse (X/Y/Z): up to 30 m/min • Table: NC rotary-tilting; size 630 × 500 mm; • Spindle: up to 28 kW; • Number of tools: 120 (o "Tool capacity: 120") • High-pressure coolant: 40 bar • Coolant tank: 1,000 liters • Tool magazine/ATC: automatic tool changer • Machining capabilities: simultaneous 3-axis milling; contouring; drilling; tapping; boring; complex surface machining; aerospace and automotive component manufacturing • Construction/design: high-rigidity universal machining centre; integrated rotary-tilting table; full 3-axis interpolation; precision linear guideways Hjdpfx Acozcp Ale Tot • Dimensions (approx.): length 4,500 mm; width 2,500–4,500 mm; height 2,500–2,700 mm • Typical applications: aerospace components; medical parts; tool & die manufacturing; automotive components; precision mechanical engineering Additional equipment • Internal coolant system • Chip conveyor • Touch probe • Tool setter • Tool measurement system (Blum / Renishaw, depending on machine) • Electronic handwheel • Automatic pallet changer (RS4 versions)

Condition: ready for operation (used), Year of construction: 1998, A universal machining center is offered with control: Heidenhain TNC 426. Operating hours: approx. 45380h, spindle hours: approx. 14384h. Viewing possible by appointment. Hjdex Ivi Depfx Ac Tst

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 29130000062, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, feed length X-axis: 90,000 mm, feed length Y-axis: 90,000 mm, feed length Z-axis: 90,000 mm, nominal power (apparent): 73 kVA, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, total height: 2,600 mm, total length: 4,000 mm, total width: 3,500 mm, table width: 650 mm, table length: 950 mm, overall weight: 10,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, input voltage: 400 V, input current: 125 A, DECKEL MAHO DMC 75 V LINEAR CNC Vertical Machining Center - Frequency: 50/60 Hz - Tool holder: HSK 63 - Table with six slots and a GARANT zero-point clamping plate, plate dimensions: 360 x 360 mm - Including 3D measuring probe - Including chip conveyor Hedpezld Nqofx Ac Tet Note: The machine can be transported on a truck up to 3000 mm wide! Note: The item must be picked up between September 8th and 10th, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach - loaded onto a truck.

Condition: used, Year of construction: 2005, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 / 82 Nm tool taper HSK-A 63 swivellable B: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg rotatable C: 360 ° max. workpiecediameter 850 mm max. workpiece height 550 mm number of toolpositions 32 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool weight 8,0 kg change-time chip to chip 10 sec feed speeds max. 30.000 mm/min rapid traverse 30 m/min Accelaration 5 m/s² total power requirement 48 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 6,5 x 5,0 x 2,9 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Axis) - only 6.100h Spindle Hours Hodpfx Acovn Ur Eo Tet

Condition: excellent (used), Year of construction: 2002, 5-axis CNC machining center 2002 Control system: Heidenhain iTNC 530 Hsdpswn A Slsfx Ac Tjt Technical data: x-axis travel: 880 mm y-axis travel: 630 mm z-axis travel: 630 mm Max. torque: 130 Nm Tool holder: SK 40 (ISO 7388IIB) Swiveling: B: 103° Work table: Table clamping surface: 1,250 x 700 mm Rotary table diameter: 700 mm Rotating: C: 360° Max. table load: approx. 500 kg T-slots: 11 x 14 mm x 63 mm Tool magazine: Number of tool positions: 32 (2 x 16) Tool holder: SK 40 (ISO 7388IIB) Max. tool diameter: 80 / 130 mm Max. tool diameter with free adjacent compartment: 160 mm Max. tool length: 315 mm Max. tool weight: 8.0 kg

Condition: used, Year of construction: 2006, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A 63 swivellable B: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg rotatable C: 360 ° Hjdpfjyackdox Ac Tjt number of toolpositions 2x16 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm feed speeds max. 30.000 mm/min rapid traverse 30 m/min total power requirement 48 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,6 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Achse)

Condition: ready for operation (used), Year of construction: 2011, operating hours: 12,946 h, functionality: fully functional, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, controller model: Heidenhain iTNC 530 HSCI, spindle speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 935 mm Travel range Y-axis: 850 mm Travel range Z-axis: 650 mm Number of axes: 3 Hjdpfx Acezwn Eto Tst Table length: 1,200 mm Table width: 850 mm Max. table load: 2,000 kg Spindle connection: HSK-A63 Spindle speed: 15,000 rpm Tool changer: 30-position Rapid traverse: 40 m/min Feed rate: 40,000 mm/min MACHINE DETAILS Control system: Heidenhain iTNC 530 HSCI Internal cooling: 40 bar / 23 liters/min Operating hours: 36,420 h Spindle hours: 12,946 h EQUIPMENT Chip conveyor