Used Deckel Maho Dmc 60 H for sale (338)

Condition: ready for operation (used), Year of construction: 2003, operating hours: 42,368 h, General Data Machine weight 6800 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 12000 Tool taper SK40 Number of axis 3 Movement X-Axis Movement 640 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm This 3-axis DMG DECKEL MAHO DMC 64 V linear was manufactured in 2003. It features a 640 mm X-axis, 600 mm Y-axis, 500 mm Z-axis, and a table size of 850 x 600 mm. Equipped with a Heidenhain iTNC 530 control unit, SK40 taper, and a tool magazine with 30 tools capacity. Consider the opportunity to buy this DMG DECKEL MAHO DMC 64 V linear vertical machining centre. Contact us for more information. Application Types Milling Ihsdpfx Ajx D Ntfjg Ujt

Condition: ready for operation (used), Year of construction: 2005, operating hours: 69,995 h, Control Unit Brand HEIDENHAIN TNC 530 Ijdpfx Agox D Iuue Ueht Main Drive Number of axis 3 Movement X-Axis Movement 885 mm Y-Axis Movement 600 mm Z-Axis Movement 600 mm Table Table load 600 kg This 3-axis DECKEL MAHO DMC 75 V Linear was manufactured in 2005. It features a travel range of 885 x 600 x 600 mm and a maximum feed speed of 90 m/min. The machine includes a high-capacity coolant system and an efficient scraper belt conveyor for swarf disposal. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 75 V machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2006, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, table width: 1,000 mm, table length: 600 mm, table load: 500 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, Equipment: chip conveyor, Accessories: Approx. 40x SK-40 tool holders (without cutting tools) Operating hours: 32,379 h (as of July 9, 2024) Ihedpfx Agsxcpkzo Ust Spindle running time: 15,674 h (as of July 9, 2024) Clamps on table are not included! Machine available from: Imediately

Condition: used, Year of construction: 2007, x-travel 885 mm y-travel 600 mm z-travel 600 mm control iTNC 530 Heidenhain Max. rpm 1 - 28.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 119 / 85 Nm tool taper HSK A63 Swivel range milling spindle B: -10° / +110° ° spindle bearing diameter 80 mm table diameter 750 mm rotation range C: 360 ° rotary speed max. 100 min/-1 max. table load 600 kg feed speeds 1 - 90.000 mm/min rapid traverse 90 m/min Feed force X/Y: 13,8 kN Feed force Z: 10,35 kN number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 140 mm max. tool length 300 mm max. tool weight 10 kg max. workpiece height 460 mm Max. Workpiece Area ca. 750 x 600 mm passage max. 600 mm total power requirement 60 kVA Isdpfx Aetqmpijg Ueht weight of the machine ca. 12 t dimensions of the machine ca. 4,5 x 4,5 x 3,0 m CNC-Machining Center Vertical DECKEL MAHO - DMC 75 V linear - 5-Axis-Machining - NEW SPINDLE from 12/2022 ! - Swiveling Milling Spindle (-10° / 110°) - Rotary Table 360° - extensive tool package - only approx. 900 spindle hours (after exchange) - WITHOUT clamping devices, WITHOUT exhaust!

Condition: used, Year of construction: 2005, x-travel 1.000 mm y-travel 1.000 mm z-travel 1.000 mm Control 840 D Siemens turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A63 swivellable B: -30 / +180 ° swivle time 1,2 s numbers of pallets 2 size of pallet 1.000 x 800 mm max. workpiece weight 1.500 kg rotatable C: 360 ° Iodpfjwf Rgfsx Ag Ujht number of toolpositions 180 pos. tool taper HSK-A63 total power requirement 78 kVA weight of the machine ca. 27,0 t dimensions of the machine ca. 8,0 x 7,0 x 3,4 m 5 Axis - CNC Machining Center Universal DECKEL MAHO - DMC 100 U duoBLOCK - Swivel-Milling-Head (B-Achse) - NC-Rotary (C-Axis) - pallet changer - 180-pos. tool-changer - WITHOUT zero point clamping system - WITHOUT RINGLER exhaust - WITHOUT tools

Condition: used, Year of construction: 2003, x-travel 630 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain Main spindle: turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 15 / 10 kW max. Torque 125 Nm tool taper MAS BT 40 swivellable B: 103 ° feed: feed speeds 20 - 10.000 mm/min rapid traverse X-axis 26 m/min rapid traverse Y-axis 26 m/min rapid traverse Z-axis 20 m/min Resolution 0,001 mm input unit 0,001 mm work table: surface area 1.000 x 600 mm rotary table dia. 600 mm number of T-slots 8 / 1 T-slot - width 14 H12 / 14 H7 Ihodpjvn Utcjfx Ag Uot T-slot - distance 63 mm max. table loading capacity 350 kg rotatable C: 360 ° Tool-Presetter: number of toolpositions 24 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 315 mm max. tool weight 8 kg total wight max. 100 kg total power requirement 26 kVA weight of the machine ca. 6,7 t dimensions of the machine ca. 4,0 x 4,0 x 3,0 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 T - 5-Axis - controled NC-Swivel-Milling-Head ( B-Axis ) - Rotary Table integrated in Working-Table ( C-Axis )

Condition: used, Year of construction: 2007, x-travel 730 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 / 87 Nm tool taper HSK-A63 swivellable NC: ° table surface area 1.000 x 600 mm T-slots 9x 14 x 63 mm table diameter 600 mm Iodpfx Aowpw E Nsg Ueht rotatable C: 360 ° max. table load 500 kg number of toolpositions 60 pos. tool taper HSK-A63 total power requirement 40 kVA weight of the machine ca. ca. 11,0 t dimensions of the machine ca. 4,5 x 4,5 x 3,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK - 5 Axis - NC-Rotary-Table - Swivel-MillingHead

Condition: used, Year of construction: 2012, Milling machines Travel distance X: 635 mm Travel distance Y :510 mm Ihjdpfsv Tx Twex Ag Ujt Travel distance Z: 460 mm HSC-machines Number of axis: 3 milling machine / machining center Control: Heidenhain TNC 530 spindle chuck: SK 40 spindle revolutions: 18000 rpm table size X: 790 mm table size Y: 560 mm max. workpiece weight: 600 kg tool changer: 60 - time input Power : 13 kW spindle cooling chip conveyor incl. pallet changer incl. measuring probe

Condition: ready for operation (used), Year of construction: 2011, Two CNC milling machines DMG are available. 1) Deckel Maho DMU 100 monoBlock, year of manufacture: 2011, travel X/Y/Z: 1150mm/710mm/710mm, tool positions: 32, rapid traverse: 30m/min, tool holder: SK40, speed: 18000rpm. Machine dimensions X/Y/Z: approx. 4250mm/3500mm/3300mm, weight: approx. 10000kg, control: Heidenhain iTNC 530, operating hours: 30521h, spindle hours: 15388h. 2) Deckel Maho DMU 60 monoBlock, year of manufacture: 2006, travel X/Y/Z: 730mm/560mm/560mm, tool positions: 24, rapid traverse: 30m/min, tool holder: SK40. Machine dimensions X/Y/Z: approx. 2900mm/1900mm/2250mm, weight: approx. 7000kg, control: Heidenhain iTNC 530, operating hours: 39296h, spindle hours: 15305h. Documentation available. An on-site inspection is possible. Only package sale possible. Ihedpfx Asxtpqvjg Ust

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN 530, workpiece length (max.): 1,250 mm, workpiece width (max.): 850 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 1,200 kg, table width: 850 mm, table height: 640 mm, table length: 1,250 mm, spindle speed (max.): 18,000 rpm, distance table to spindle center: 700 mm, number of slots in tool magazine: 60, Equipment: chip conveyor, rotational speed infinitely variable, DECKEL MAHO DMC 100V Machine after complete rebuild. Spindle overhauled and bearings replaced. Tool measurement laser: BLUM Due to company restructuring, we have for sale: HIGH-SPEED 3-AXIS MACHINING CENTER Manufacturer: DECKEL MAHO Model: DMC 100V LINEAR Control: HEIDENHAIN 530 Year of manufacture: 2003 Table size: 1250x800 mm Travel: X 1000, Y 800, Z 500 mm Workpiece weight: max. 1200 kg Major machine overhaul: 06.2025 Spindle: HSK 63A 18000 rpm Power S1/S2: 15kW/19kW Torque S6 40%ED: 130Nm Tool changer: 60 positions Workpiece probe: HEIDENHAIN Tool probe: BLUM laser Ijdpjx Elxiofx Ag Uoht Chip conveyor Internal coolant supply (IKZ) Machine in very good condition, after complete overhaul. Regularly serviced. Machine is in continuous operation.

Condition: good (used), Year of construction: 2010, operating hours: 43,000 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rotational speed (max.): 14,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, rotational speed infinitely variable, Machine has 2 pallet. Control is Siemens. Spindle was changes directly frm DMG servis - new spindel has cca 500 hours Ijdpfxev Acpbe Ag Usht

Condition: like new (used), Year of construction: 2009, operating hours: 47,443 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 800 mm, feed length Y-axis: 800 mm, feed length Z-axis: 800 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, torque: 980 Nm, controller manufacturer: Siemens, controller model: 840D-Powerline, total height: 2,900 mm, total length: 4,950 mm, total width: 5,060 mm, table width: 800 mm, table length: 630 mm, table load: 1,000 kg, rotational speed (max.): 8,000 rpm, overall weight: 14,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 22,963 h, coolant supply: 40 bar, spindle motor power: 32,000 W, number of slots in tool magazine: 180, CNC controller: Siemens 840D-Powerline Axes X-axis travel mm: 800 Ihedpeui Np Rjfx Ag Uet Y-axis travel mm: 800 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 2 Table dimensions mm: Ø800x630 Max. workpiece weight kg: 1000 Table rotation speed rpm: 8000 max. torque Nm: 980 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 180 Chip-to-chip time s: 4.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Signal lamp 3D quickSET Machine interface for FASTEMS system Paper band filter Machine running times Under power: 47443 Spindle Working: 22963 Basic machine dimensions / weight Length mm: 4956 Width mm: 5064 Height mm: 2900 Weight kg: 14000

Condition: used, Year of construction: 2000, functionality: limited functionality, machine/vehicle number: 2881-0469, Machine is running. Axes are moving. Spindle is rotating. Iodpjx Azqmjfx Ag Ueht

Condition: used, Year of construction: 1998, x-travel 500 mm y-travel 420 mm z-travel 500 mm spindle taper SK 40 table surface area 700 x 400 mm table load capacity 800 kg control Heidenhain TNC 426 rated capacity 40 kVA voltage 400 V weight of the machine ca. 6,5 t dimensions of the machine ca. 3,4 x 3,7 x 2,9 m DECKEL-MAHO machining centres are suitable for manual and automatic operation. --> Area of application MILLING: --> DRILLING: --> Face milling --> Face countersinking --> Circular milling --> Circular drilling --> Screw milling --> Screw drilling --> Gear milling --> Profile drilling --> Profile milling --> Form drilling --> Form milling Ihsdjw Inrvspfx Ag Uet --> Including vertical tool changer with double gripper --> Tool magazine, variable space coding (VPC): --> Number of tools: 20 --> Standard tool - max. Ø: 90 mm --> Special tool - max. Ø with free neighbouring spaces: 140 mm --> Max. tool length from spindle nose: 300 mm --> Max. tool weight: 12 kg

Year of construction: 1997, condition: good (used), A vertical machining center from DECKEL MAHO, used in good condition. Equipment - CNC control PHILIPS DIALOG 112 - Direct path measurement (rulers) - tool magazine - Electronic handwheel - Central lubrication - Spindle cooling - documentation Travel X/ Y/ Z 700/ 550/ 500 mm spindle speed infinitely variable 15.000 rpm table dimensions 900 x 550 mm table load 800 kg working feed X/ Y 1 - 10000 mm/min rapid traverse X Y Z 30 m/min rapid traverse Z 20 m/min tool magazine 30 places Tool holder SK 40 Rated power 50 KVA Rated current 70 A Iodpfx Agei Dt Dkj Ujht Compressed air supply 6 bar Transport dimensions L x W 3.3 x 2.4 m Machine height 2,6 m Weight of the machine 7000 kg Technical data and dimensions: Errors excepted.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 37,369 h, functionality: fully functional, machine/vehicle number: 1112.000594 3, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, table width: 1,000 mm, table length: 600 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Working Spindle Tool holder: SK 40 Worktable Clamping surface: 1,000 × 600 mm T-slot spacing: 63 mm Number of T-slots / size: 9 / 14 H7 Tool Magazine Magazine positions (2 × 12 positions): 24 pcs Tool diameter magazine 1: 130 mm Tool diameter magazine 2: 80 mm Tool length from spindle nose: 315 mm Iedpfewx Ekxox Ag Usht Tool weight for automatic tool change: 8 kg Total tool weight in magazine: 100 kg Main Drive Spindle speed: 12,000 rpm Tool holder: SK 40 MACHINE DETAILS Control: Heidenhain TNC 426/430 Electrical Equipment Machine connection: 3N/PE–50/60 Hz, 400/230 V Standard current consumption: 38 A Standard power consumption: 26 kVA Standard fuse protection: 50 A Rated output: 35 UVA Transport Transport weight (machine with tool changer): approx. 6,700 kg Transport dimensions (L x W x H): approx. 3.50 x 2.70 x 2.21 m EQUIPMENT Tool changer included

Condition: ready for operation (used), Year of construction: 1999, operating hours: 32,906 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, table width: 800 mm, table length: 630 mm, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel X-axis: 800 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Control: Heidenhain Millplus Swivel head: H / V 0°/90° Speed range: 20 - 8,000 1/min Gear stages: 2 Spindle motor: 16 kW Tool holder: SK 40 Tool stations: 120 Ijdjwrr E Aspfx Ag Uoht Number of pallets: 2 Table size: 800 mm x 630 mm Max. workpiece weight: 800 kg MACHINE DETAILS Power-on time: 76,098 h Spindle run time: 32,906 h EQUIPMENT - Chip conveyor - Internal cooling (IKZ) - Electronic handwheel - Oil mist extraction - Operating mode: 4

Condition: used, Year of construction: 2011, DMU60: 5-axis Spindle 18,000 rpm Tool magazine with 24 positions Tool holder SK40 Spindle hours: 15,305 Zeroclamp 6 pots 138 (zero-point clamping system) DMU100: 5-axis Spindle 18,000 rpm Tool magazine with 32 positions Ihsdoxpt Idopfx Ag Ust Tool holder SK40 Spindle hours: 15,389 Zeroclamp 12 pots 138 (zero-point clamping system)

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Travel X: 1,040 mm Travel Y: 600 mm Travel Z: 500 mm Spindle speed: 12,000 rpm Spindle taper: SK 40 Tool magazine: 30 positions Internal coolant supply: 40 bar Clamping area: 1,250 x 600 mm Maximum table load: 800 kg EQUIPMENT Ihodpfx Aewtrb Hjg Ujt - Chip conveyor - Spindle cooler - ICS (internal coolant supply) - Tool measurement - Documentation

Condition: ready for operation (used), Year of construction: 2002, operating hours: 23,838 h, functionality: fully functional, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 600 kg, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis travel: 640 mm Ihodpfx Aewtq Rgjg Uet Y-axis travel: 600 mm Z-axis travel: 500 mm Control: Heidenhain iTNC 530 External length: 850 mm External width: 630 mm Max. table load: 600 kg Spindle speed range: 12,000 rpm Tool holder: SK 40 MACHINE DETAILS Operating hours: 107,000 h Spindle hours: 23,838 h

Condition: ready for operation (used), Year of construction: 2008, operating hours: 37,826 h, functionality: fully functional, machine/vehicle number: 29100008944, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 600 kg, table width: 850 mm, table length: 630 mm, TECHNICAL DETAILS Travel in X-axis: 640 mm Travel in Y-axis: 600 mm Ihodswtq Rmopfx Ag Uet Travel in Z-axis: 500 mm Table size: 850 x 630 mm Maximum table load: 600 kg Spindle taper: SK 40 MACHINE DETAILS Control: FANUC Connected load: 39 kVA Power-on time: 75,884 h Spindle hours: 37,826 h

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 12,000 rpm, New spindle in 2023 TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Table size: 800 x 635 mm Control: Heidenhain Spindle speed: 0 - 12,000 rpm Milling spindle drive: 10.0 kW Tool holder: ISO 40 MACHINE DETAILS Iedpjwtq Swefx Ag Uoht Machine weight approx.: 11 tons Connected load: 44 kVA Maximum current: 64 A

Condition: ready for operation (used), Year of construction: 2002, operating hours: 38,040 h, functionality: fully functional, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS CNC Control: Heidenhain iTNC530 X-axis: 1,040 mm Y-axis: 600 mm Ihodpfjxal Rxox Ag Uet Z-axis: 500 mm Linear drive: On the X-axis Worktable Dimensions: 1,250 mm x 600 mm Max. workpiece weight: 800 kg Spindle Spindle operating hours: 38,040 h Spindle speed: 12,000 rpm Tool System Taper type: SK-40 Tool magazine capacity: 30 Tool diameter: 100 mm Max. tool diameter with empty neighboring pockets: 140 mm Max. tool length: 300 mm Max. tool weight: 7 kg MACHINE DETAILS Length: 3,750 mm Width: 2,340 mm Height: 3,164 mm Weight: 8,900 kg EQUIPMENT - Direct measurement system - Blum tool laser measurement for tool length and diameter - Chip conveyor - Bed flushing - Electronic handwheel

Condition: ready for operation (used), Year of construction: 2014, operating hours: 23,816 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 60, TECHNICAL DETAILS X travel: 850 mm Y travel: 560 mm Z travel: 510 mm Max. spindle speed: 12,000 rpm Tool changer: 60 stations Spindle taper: SK40 Control: SIEMENS 840D Ihodpexal Rrefx Ag Uet MACHINE DETAILS Power-on time: 23,817 h Spindle hours: 9,158 h EQUIPMENT - Chip conveyor

Condition: repair required (used), Year of construction: 2005, operating hours: 44,050 h, functionality: not functional, machine/vehicle number: 2731660/C 0000, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, Machining center with chip conveyor and belt filter system. Travel X/Y/Z 600/400/425mm Speed range 20 to 18,000 1/min AC main drive 35/25 kW (40/100% ED) Isdpfx Aorl Rwxeg Uoht 3D path control SINUMERIK 840D powerline Tool change/ 25 magazine positions HSK-A 63 tool holder Shuttle table Clamping surface 2x660x400 mm Infrared measuring probe Heidenhain TS 641 Internal cooling lubricant supply (IKZ) 40bar / 23l/min / 600L container Scraper belt conveyor discharge height 1000mm incl. coolant tank 200L Gravity paper belt filter Rotating viewing window Oil and emulsion mist separator with mechanical filter Work area flushing - chip flushing Flow rate: 100l/min Pressure: 1bar Electronic handwheel SIEMENS SINDIC data transmission between network and SINUMERIK 840D Machine is sold as in need of repair. There is a defect in the sensor for the tool changer (position detection). Please send technical questions in writing. >>> Commercial sale