Used Deckel G1L for sale (683)

Year of construction: 1991, condition: ready for operation (used), Travel X/Y/Z: 380mm/280mm/300mm, working dimensions X/Y/Z: 580mm/450mm/340mm, max. electrode weight: 50kg. Machine dimensions X/Y/Z: approx. 2100mm/1650mm/1750mm, weight: approx. 3500kg. An on-site inspection is possible. Ijdpfxezb Nlws Adqstk

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! The spindle was replaced on November 14, 2018. TECHNICAL DETAILS Travel in the X-axis: 880 mm Travel in the Y-axis: 630 mm Travel in the Z-axis: 630 mm Spindle speed: 12,000 rpm Iodpfozpw Iujx Adqotk Controlled B-axis: -15° to +90° Tool holder: SK 40 Number of tool magazine slots: 32 MACHINE DETAILS Control system: Heidenhain iTNC 530 Spindle operating hours: 50,033 h EQUIPMENT Coolant system

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, quill stroke: 80 mm, overall weight: 3,900 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 800 mm Ijdpozpwxyefx Adqetk Travel in Y-axis: 700 mm Travel in Z-axis: 550 mm Vertical quill travel: 80 mm MACHINE DETAILS Machine weight: 3,900 kg EQUIPMENT Rotary table

Condition: good (used), Year of construction: 1986, x-travel: 710 mm y-travel: 600 mm z-travel: 455 mm Control: Dialog 4 Speed: 6300 rpm Tool holder: SK40 Quill stroke: 80 mm Table size: 550 x 1000 mm Table load: 0.6 t Total power requirement: kW Machine weight approx.: 4 t Itedpfozvbhlex Adqsk

Condition: used, Year of construction: 2010, Technical details: x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm turning speeds: 20 -10.000 1/min control: HEIDENHAIN iTNC 530 tool change unit: 30 Pos. tool taper: SK 40 rapid traverse: 24 m/min spindle: 13 / 9 kW Round-swivelling table: 630 x 500 mm total power requirement: 26 kVA weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,1 x 2,4 x 2,6 m 5-axis simultaneously machining center, NC-round-swivelling table B -5 / +110°, C360°, direct measuring system, el. handwheel, flush gun, chipconveyor, infrared touchprobe TS 649, mode 4, Itedpezp Nfrjfx Adqek laser tool measuring system, approx. 95.000h "machine on", approx. 11.500h "spindle on" *

Condition: ready for operation (used), Year of construction: 2003, operating hours: 93,500 h, travel distance X-axis: 1,180 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, number of axes: 5, This 5-axis DECKEL MAHO DMC 100 T was manufactured in 2003. It features X, Y, Z travels of 1,180 mm, 710 mm, and 710 mm respectively, a SK40 tool magazine with 32 positions, internal coolant supply, and a chip conveyor. Consider the opportunity to buy this DECKEL MAHO DMC 100 T vertical machining centre. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Internal coolant supply • Chip conveyor Extra Information Iedpox T Dgnofx Adqjtk The machine is mounted on a beam and has not been connected to the mains since November 2025!The buyer purchases the item subject to the exclusion of any liability for material defects!The spindle was replaced in 2022 for approximately 20,000.00 euros!The spindle has clocked up only approximately 1,400 hours since then Technical Specification Through-spindle Coolant Yes

Condition: good (used), Year of construction: 2011, functionality: fully functional, Discover the used 5-axis machining center DECKEL MAHO DMU 60 eVo, manufactured in 2011. This machine is equipped with a Siemens control system and, thanks to features such as internal cooling, a measuring probe, and laser measuring, offers the highest precision for complex manufacturing tasks. A very well-maintained and immediately ready-for-use machining center for demanding users. Technical data of the Deckel Maho DMU 60 eVo: Travel in X-axis (mm) 650 Travel in Y-axis (mm) 500 Travel in Z-axis (mm) 500 Travel in B-axis -5/+110 C-axis nx360 Number of axes 5 Spindle speed (rpm) 14000 Spindle power (kW) 18.9 Tool interface SK40 Weight (kg) 10000 Machine hours (h) 15995 Year of manufacture 2011 Control system Siemens 840D SL Control type CNC Itedpfjzq Eghsx Adqsk Total power requirement (kW) 50 kVA Weight (kg) 10000 kg Location Baden-Württemberg Delivery September 2026 Equipment and accessories: -Internal cooling -Chip conveyor -Laser measuring -Measuring probe -3D-quickSET for checking and correcting the 4- and 5-axis kinematics -Band filter -Used tool holders -Coolant gun

Condition: used, Year of construction: 2007, operating hours: 70,859 h, machine/vehicle number: 15145361464, Travel ranges (X/Y/Z): 3,600/920/820 mm, with B-axis and integrated NC table, maximum spindle speed: 18,000 rpm, tool interface HSK-A63, 30-position tool changer, pendulum machining, control system SIEMENS Sinumerik 840 D Powerline, chip conveyor, emulsion separator, infrared measuring probe. The customer must ensure that drilling emulsion/lubricants are professionally extracted and disposed of. Itsdpszqy Umefx Adqjk

Condition: not inspected (used), Year of construction: 1986, feed length X-axis: 580 mm, feed length Y-axis: 400 mm, feed length Z-axis: 450 mm, spindle speed (max.): 2,500 rpm, Grunding Contour 2 table 800x460 mm travel 580x400x450 mm max spindle speed 2500 rpm Itjdpfxjy E N Dvo Adqjk spindle taper 40

Condition: excellent (used), Year of construction: 1999, Control system: Heidenhain TNC 426 Travel ranges X/Y/Z: 1250 x 880 x 800 mm Spindle speed: 8,000 rpm Tool magazine for 60 tools, SK 50 Iedpjzqv A Tefx Adqotk Universal milling head +0° / -90° indexing NC rotary table 1250 x 1000 mm Chip conveyor Measuring probe

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, controller manufacturer: SIEMENS, controller model: 840D, total height: 2,700 mm, total width: 1,950 mm, overall weight: 7,000 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 25,000 W, product length (max.): 3,308 mm, number of axes: 3, This 3-axis DECKEL MAHO DMP 60V was manufactured in 2003. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 425 mm. The machine is equipped with a spindle speed range of 20 to 18,000 rpm and a tool changer with 25 magazine positions. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMP 60V vertical machining centre we have for sale. Contact us for further details. Iedpfx Adoznc T Hsqetk - Control Unit: Siemens 840D / SINUMERIK 840D powerline- Spindle Speed Range: 20 to 18,000 rpm- AC Main Drive Power: 35/25 kW (40/100% ED)- Tool Changer / Capacity: 25 magazine positions- Tool Holder Taper: HSK-A 63- Worktable Type: Swivel / Pallet Changer- Clamping Surface Area: 2x 660 x 400 mm- Internal Coolant Supply (IKZ): 40 bar / 23 l/min / 600 L tank- Coolant / Filtration System: Interlit Kompakt-Filteranlage (Type: SPB 3/600, Filter surface: 0.7 m², Tank capacity: 600 l, YOM: 2003) with gravity paper belt filter unit- Coolant / Chip Management: Scraper belt chip conveyor (1000 mm discharge height) with auxiliary 200 L coolant tank- Accessories: Electronic handwheel, integrated blow-off/spray gun attached to front cabinet- Machine Dimensions (Height): 2700 mm (Machine height), 2645 mm (Transport height)- Machine Dimensions (Width): 1950 mm (Without control panel), 2990 mm (With control panel / door open), 1950 mm (Transport width)- Machine Dimensions (Length): 3308 mm (Machine length), 3850 mm (Transport length with swivelled control)- Required Floor Area: 6000 x 4000 mm (Standard), 6000 x 5200 mm (With chip conveyor), 6000 x 5300 mm (With chip conveyor and coolant system)- Transport Dimensions (L x W x H): Approx. 3400 x 2000 x 2700 mm- Documentation Included: Machine Handbook

Condition: used, CNC 3+2 axis vertical machining center DECKEL MAHO type DMU 35 M CNC control SIEMENS 810D with ShopMill Manufacturer no. 11065353554 Year of manufacture 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Ijdpfx Ajvt D D Uedqstk Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel - rotary table: 400 x 290 mm, center hole 30H6 Table load: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input resolution: 0.01 mm Total power requirement: 15 kVA Speed range - main spindle: 20 - 6,300 min/-1 Drive power - main spindle: 6.3 / 10 kW (100% / 40% ED) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull bolt: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power connection: 400 volts, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) - Manual swivel rotary table, C axis = table rotation 360°, B-axis = swivel range +105°/ -15° - direct path measuring system for all 5 axes - electronic handwheel - spindle drive via servo motor with toothed belt and 2 gear stages - fully protected cabin with sliding door - swiveling control panel - coolant nozzles on the vertical head - chip tray with coolant container and cooling lubricant pump - work area lighting - documentation available space requirement L x W x H 2000 x 2000 x 2100 mm weight 1750 kg good condition

Condition: used, Universal Milling Machine DECKEL Type FP 1 Universal milling machine Machine No. 2101 – Year of manufacture: 1979 Manual travel X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Itodpfx Aer U St Usdqek Rapid traverse: 1200 mm/min Motor power: 1.5 and 1.9 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at the vertical milling head: 60 mm - Vertical milling head can be swiveled and extended horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated in the machine base - Standalone control cabinet - Original chip tray for mounting on the machine base - Electrical schematic available Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg Good condition

Condition: used, Univ. Schwenk-Tilting-Rotary Table DECKEL Universal tool and milling machine mounting table, suitable for FP 2L, FP 3L or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm Iodpfxjd E A I Nj Adqjtk - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with a scale - Can be tilted +/- 15 degrees from/towards the machine - Can be swiveled +/- 15 degrees - Swiveling table, tilting table, angular table Permissible load max. 1000 kg Weight: 400 kg Good condition

Condition: used, Univ. universal tool milling machine DECKEL, type FP 1 Machine no. 52185, year of manufacture 1968 Travel distances: X: 300 mm, Y: 150 mm, Z: 340 mm Table size: 600 x 250 mm Spindle mount: SK 40 - S20 x 2 Iodpfx Ajdzqb Sedqetk Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.4 kW, pole-shifting Power connection: 380 volts, 50 Hz - Feed in the X and Z axes - Two motor speeds and 8 gear stages - Quill travel on the vertical milling head: 60 mm - Fixed tilting table - Coolant system in the machine base - Adjacent control cabinet - Counter holder with counter bearing for horizontal milling, SK 40 Space requirement L x W x H: 1200 x 1100 x 1600 mm Weight: approx. 1000 kg Very good condition

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Ijdpfx Aov R E Rdsdqotk Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: used, Univ. universal milling machine DECKEL, Type FP 1 Machine No. 28317, Year of manufacture approx. 1960 Travel distances: X: 245 mm, Y: 150 mm, Z: 340 mm Table size: 600 x 210 mm Spindle mount, horizontal: MK 4 - S20 x 2 Spindle speed, vertical: 95-1900 rpm, 12 steps Spindle speed, horizontal: 60-1200 rpm, 12 steps Motor power: 0.8 and 1.1 kW, pole-changing Power connection: 380 Volt, 50 Hz - Spindle speed controlled via 2 motor speeds and 6 gear stages Itodpfxoiy Ekve Adqek - Feed in the X and Z axes - Coolant system with mechanical pump in the machine base - Quill travel on the vertical milling head: 60 mm - Vertical milling head swivels +/- 90° - Metal substructure made of angle iron with machine feet Space requirement L x W x H: 1100 x 900 x 1650 mm Weight: 650 kg Good condition

Condition: used, Univ. universal tool milling machine DECKEL, Type FP 1 Machine No. 51265, Year of manufacture approx. 1967 Travel distances X: 300 mm, Y: 150 mm, Z: 340 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20 x 2 Spindle speed 40-2000 rpm, 16 speeds Motor power 1.0 and 1.6 kW, pole-changing Mains connection 380 volts, 50 Hz - Feed in the X and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill movement on the vertical milling head 60 mm - Swivel, rotary, and tilting angle table - Coolant pump in the machine base - Adjacent control cabinet Space required L x W x H 1100 x 1100 x 1600 mm Weight 690 kg Iodpfx Adeghtvajqjtk Good condition

Condition: used, Sheet metal cabinet with hinged door, LID Original lid for the accessory cabinet Lid for FP1 / FP2 / FP3 with 2 sliding shelves Iedpfoznn Hxox Adqetk without contents Length: 1000 mm Width: 750 mm Height: 960 mm

Condition: used, Keyway milling head, head for DECKEL milling machine, type FP 1 Factory number: 21948 Dovetail width: approx. 74 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 285 mm Distance from the front edge of the dovetail to the center of the gear: approx. 200 mm Stroke size: max. 80 mm Stroke rate: max. 475 double strokes/min. Tool holder: 4-sided, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Drive from the machine gearbox, within the dovetail guide (as with the normal vertical head) - This keyway milling head is inserted into the dovetail guide in place of the normal vertical milling head (Mounting in place of the vertical milling head) - Drive gear in the keyway milling head, 39 teeth, gear width 15 mm, presumably 15° pressure angle - Keyway milling head can be rotated 360° on the flange plate, degree scale +/- 35° Iodpfx Adeznn Hreqotk - Small breakout point on the housing Weight: 28.5 kg DECKEL FP1 has a pressure angle of 15° on the drive wheel. DECKEL FP2 + FP3 have a pressure angle of 20° on the drive wheel.

Condition: used, Counter bearing and adapter for milling machine for horizontal milling Counter bearing and adapter (counterholder) for DECKEL milling machine (Bearing block with dovetail mounting adapter DECKEL FP1 + FP2) Type 9570 Dovetail width, narrow: approx. 72 mm Dovetail width, wide: approx. 88 mm Dovetail height: approx. 15 mm Iedpfx Aoxcbl Dsdqjtk Length (bearing block): 133 mm Width (bearing block): 50 mm Total height (bearing block): 105 mm Bearing bore: Ø 17 mm (with bronze bearing bushing) Distance from bore axis to dovetail mounting face: approx. 82.5 mm (center height) - Adapter fits dovetail and mounting surface, raises center height by 22.5 mm to 105 mm Total length (dovetail rail): 635 mm Weight: 3.8 kg Very good condition

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 - Year of manufacture: 1979 Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 / 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox stages - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm - Fixed angle table 600 x 210 mm - Coolant system in the machine base - Separate control cabinet Itsdpfx Aor D T U Dsdqok - Original chip tray mountable on machine base - Wiring diagram available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg In very good condition

Condition: used, Univ. universal milling machine DECKEL, Type FP 1 Machine No. 33064, Year of manufacture approx. 1960, overhauled in 2012 Travel distances: X: 300 mm, Y: 150 mm, Z: 330 mm Table size: 600 x 210 mm Spindle mount: MK 4 - S20 x 2 Spindle speed, vertical: 95-1900 rpm, 12 steps Spindle speed, horizontal: 60-1200 rpm, 12 steps Motor power: 1.1 and 1.4 kW Power connection: 380 Volts, 50 Hz - Feed in the X and Y axes - Quill movement on the vertical milling head - Fixed angle table - Coolant system with mechanical pump in the machine base Isdedzp T Ejpfx Adqstk - Adjacent control cabinet with cable plug connection Space required L x W x H: 1100 x 900 x 1600 mm Weight: approx. 900 kg Good condition Machine was overhauled in 2012.

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Manufacturer: FD Friedrich Deckel, three-jaw chuck, chuck size Ø 85 mm -Bolt circle: Ø 73 mm / M5 -Passage: Ø 16 mm -Dimensions: Ø 85 x 53 mm Itedpfx Ajzlcu Sedqjk -Weight: 1.4 kg

Condition: ready for operation (used), Working travels 300x150x340mm Universal table 600x260mm Itsdpjdr E Apofx Adqek Spindle taper 40 Spindle speeds 40-2000 rpm Digital read-out Misc.accessories MARCELS MASCHINEN CH