Used Deckel Fp 4 Ma for sale (700)

Condition: used, Year of construction: 1980, x-travel 300 mm y-travel 160 mm z-travel 340 mm tool taper SK40 Speed 40-2000 U/min. Laodpfx Asw A Ap Hsmpea control Aktiv HEIDENHAIN table-size 600 x 210 mm total power requirement 2 kW weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1200x1100x1600 m - Active feed in the X and Z axes - Additional swiveling table 600 x 210 mm - Coolant system - Counter bearing for horizontal milling - Several fixtures and clamping devices/milling cutters - Operating instructions

Condition: used, Brand Deckel Model FP4M Year of manufacture 1987 Spindle taper SK40 X-axis 500 mm Y-axis 400 mm Z-axis 400 mm Table 800x460 mm Spindle speed 50-2500 rpm Lasdpew Hyb Ujfx Ampsa Power 4.4 kW

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, total length: 800 mm, table width: 460 mm, table length: 800 mm, type of input current: three-phase, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, warranty duration: 3 months, Equipment: documentation/manual, We are offering this fully overhauled Deckel FP4 M milling machine, year of manufacture 1985. Lsdjx Sllpopfx Ampsaa Manufacturer: Deckel Model: FP4 M Year: 1985 Condition: overhauled Control: TNC113 Aktiv control Optional: universal table with a clamping surface of 800mm x 370mm If you have any questions or require further information, please send us a message or give us a call.

Condition: used, Geldmacher MST / Deckel FP4M Milling Machine, Tool Milling Machine Weight: approx. 1,450 kg Year of manufacture: 2012 Installation dimensions: Reference value: approx. 2,500 × 2,700 × 2,100 mm (Length × Depth × Height) Travels: X-axis: approx. 500 mm Y-axis: approx. 400 mm Z-axis: approx. 400 mm Spindle taper / Tool holder: SK 40 Quill stroke: Vertical quill: approx. 90 mm travel; additionally, the vertical milling head is movable on the spindle head Spindle speed range: Approx. 50 - 2,500 rpm Feed rates: Feed: approx. 8 - 630 mm/min; Rapid traverse (max. feed rate): approx. 1,300 mm/min The machine is in very good condition. You are welcome to arrange an inspection. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, we can issue a net invoice (VAT-free) provided you supply a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers as well. The stated company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data as well as mistakes in the article description may occur and are subject to change. Laedpfx Aexcldkempja

Condition: used, Year of construction: 1990, x-travel 0600 mm y-travel 500 mm z-travel 500 mm Lajdpfxeyq Sk Us Ampja table-size 500 mm feed range 2- 10.000 mm/min rapid traverse 10 m/min Tool bore ISO 40 turning speed range 0- 6300 U/min main drive DC 8 kW CNC control Dialog 11 total power requirement 23 KVA weight of the machine ca. 5050 kg dimensions of the machine ca. 3,0x2,5x2,0 m CNC milling machine with Dialog 11 control, housing arround working area, rotary table as a 4th axe and ATC with 40 Positions. Machine has been refurbished.

Condition: used, Year of construction: 1983, Technical details: Ljdswgdz Eopfx Ampjaa x-travel: 560 mm y-travel: 500 mm z-travel: 450 mm

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP4M Active Manufacturer: Deckel Type: FP4M Condition: used, good Digital readout: 3 - axis digital readout Heidenhain Travels: X - axis: approx. 500 mm Y - axis: approx. 400 mm Z - axis: approx. 400 mm Ljdpfx Ameyub Aujpsaa Table clamping surface: approx. 700 x 400 mm Speed range: approx. 50 - 2500 rpm Tool holder: ISO 40 Hydraulic tool clamping Drive power: approx. 6.0 kW Feed rates & rapid feeds: in all 3 axes Feed range: approx. 8 - 630 mm/min Rapid traverse: approx. 3.0 m/min L x W x H: approx. 2300 x 1800 x 1800 mm Weight: approx. 1750 kg Machine light Spindle guard Scope of delivery: - 10x tool holders - Allmatic high-pressure vice - documentation - Spindle guard

Condition: good (used), Year of construction: 1987, Deckel FP4M tool milling machine with 3-axis Heidenhain digital readout, fixed table, SK 40 spindle taper. Accessories: various collets and milling arbors. Good, ready-to-operate condition. Can be demonstrated under power by arrangement. Laodpjxmi I Ijfx Ampoa

Condition: used, Year of construction: 1992, machine/vehicle number: 2821-1444, See pictures for condition. More detailed information about the machine will follow shortly. Lodpfxjtgkd Rj Ampoaa

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-axis Heidenhain ND780 Digital Readout, special finish in light grey!!! Technical Data: >> Year of manufacture: 1986 Machine No. 2203-2126 >> Fixed angle table (newly planed) >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake Laodpfx Aoylmh Dompoa >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head on spindle support adjustable by 150 mm >> Vertical and horizontal quill – SK40 >> Vertical quill extendable by 90 mm >> Pull stud system: M16 >> Weight approx. 1,500 kg Accessories and Features: >> 3-axis digital readout Heidenhain ND780 >> Coolant system >> Chip tray >> Central lubrication About the machine: Offered is a Deckel FP4M universal milling machine in very good condition. The machine has been partially overhauled, with minimal backlash and all leadscrews move smoothly and evenly. The milling machine runs quietly even at maximum speeds. Rapid traverse is available on all axes and all bellows are new. The fixed angle table has been newly scraped. A reliable and user-friendly machine. Oil change carried out. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. Take the opportunity to view and test the machine under power at our facility. For an additional charge, the machine can be supplied in CE-compliant configuration.

Year of construction: 1990, condition: good (used), Various collets and holders Approx.300 pieces. For DECKEL milling machines FP1 -FP2-FP3-FP4 Single sale demand inquiries. Laodpehvz Iiofx Ampja

Year of construction: 1968, condition: good (used), For sale is a milling machine Deckel brand from 1968 The machine is in a good to very good condition and fully functional (No digital display but can be mounted additionally on request) Technical data: Tool holder: SK 40 Travel X/Y/Z: 400 / 200 / 400 mm speed range: 40 - 2000 rpm spindle travel vertical: 60 mm spindle travel horizontal: 100 mm feeds: 8 - 400 mm/rev table size: 700 x 330 mm Laodpfxoihf Ets Ampja motor power: 2,2 kW connection: 400 V / 16 A plug weight: approx. 1300 kg All prices plus VAT Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: good (used), Electric motor, three-phase motor, brake motor -Manufacturer: Siemens, electric motor type 1LC3113-4BB23 Z from milling machine Deckel FP4L -Power: 4.0 kW -Speed: 1435 rpm -Design: B14 -Protection class: IP 44 -Brake: multi-disc brake type EK5dB24 Lajdpeul H Dwjfx Ampoa -Dimensions: 575/270/H225mm -Weight: 64 kg

Condition: used, Control panel, operating unit, control board, operating panel, operating unit, keyboard, CNC control -Manufacturer: Deckel, control unit from milling machine Deckel FP4L Ljdpfxoul H Ezj Ampeaa -Transport dimensions: 1200/800/H220 mm -Weight: 33 kg

Condition: good (used), Universal milling head, milling chuck, milling extension, angle milling head Laodpfxoulp Aie Ampea -Manufacturer: Deckel, milling head from milling machine FP4L -Mounting: SK40 -Milling head: swiveling -Tool clamp: electric motor -Individual components: see photos -Transport dimensions: 1690/360/H745 mm -Weight: 548 kg

Condition: reconditioned (used), Year of construction: 1991, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 3,600 m/min, feed rate Y-axis: 3,600 m/min, feed rate Z-axis: 3,600 m/min, quill stroke: 80 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, table length: 530 mm, table width: 900 mm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 40 rpm, table load: 450 kg, Equipment: rotational speed infinitely variable, The machine is designed and built to be very stable and robust. Thanks to its excellent accessibility, it is extremely user-friendly. The machine can also be moved manually using mechanical handwheels. CNC Path Control DECKEL Dialog 11 Easily programmable 3D path control with color graphic support, dialogue guidance for cycle input, contour path calculator, editor functions, clear program and tool management, and the possibility of parallel programming. Travel paths X / Y / Z: 560 / 500 / 450 mm Tool holder: SK40 DIN 69872 Clamping system: Hydromechanical clamping system SK40 with drawbar according to DIN 2080 or DIN 69872 Working spindle: Vertical and horizontal. Manually retractable quill in vertical direction 80 mm. Ledpoyn Dq Iefx Ampjaa Milling head: Manually swivels +/- 90° Speed range: 40–4000 rpm, geometrically stepped Direct-drive gearbox for maximum torque / milling performance at the working spindle Feed rate: 2–3600 mm/min, infinitely variable feed Rapid traverse: 4000 mm/min Angle table: 530 x 900 mm, max. load capacity 450 kg

Year of construction: 1987, condition: ready for operation (used), Offered is a Deckel FP4NC vertical milling machine with Heidenhain TNC 355 control. Year 1987, including tool cabinet as well as various tools. Travel distances: X/Y/Z: 560mm/500mm/410mm, dimensions X/Y/Z: approx. 1800mm/1600mm/2000mm, weight: approx. 2400kg. Viewing is possible by appointment. Lasdsxyk Upopfx Ampoa

Year of construction: 1987, condition: ready for operation (used), A CNC universal milling machine Deckel is available. Travel X/Y/Z: 400mm/400mm/400mm, table dimensions X/Y: 700mm/460mm, max. table load: 350kg, tool holder: SK40, quill stroke: 80mm, speed: 4000rpm, feed rate: 3600mm/min, rapid traverse: 4m/min. Machine dimensions X/Y/Z: approx. 1800mm/1800mm/2200mm, weight: approx. 2500kg, control: Contour 3. The tool change magazine is no longer in operation. Documentation available. An on-site inspection is possible. Lodpfx Asya Hw Ujmpjaa

Condition: ready for operation (used), functionality: limited functionality, machine/vehicle number: 2832-1076, feed length X-axis: 560 mm, feed length Y-axis: 500 mm, feed length Z-axis: 390 mm, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 390 mm, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, total height: 2,265 mm, total width: 2,410 mm, total length: 2,710 mm, table width: 530 mm, table length: 900 mm, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 40 rpm, table load: 800 kg, overall weight: 2,890 kg, input voltage: 380 V, workpiece weight (max.): 800 kg, input current: 44 A, input frequency: 50 Hz, number of spindles: 2, number of slots in tool magazine: 20, Equipment: documentation/manual, Tool holder: SK 40, Control: DECKEL DIALOG 11, with documentation. According to our research, the NPL01 board of the tool changer is defective. Therefore, the automatic tool changer does not work. Otherwise, the machine is fully functional. Operating manual (Machine manual 1), diagnostic manual for the 'DIALOG11' control, machine manual 2 (accessories), programming manuals 1-3, and electrical wiring diagrams are available. Ledpowqdtpjfx Ampsaa The machine can be viewed under power. The machine is bought as is. No warranty.

Condition: excellent (used), Year of construction: 1986, Dear Sir or Madam, We are offering you very well-maintained milling machines of the Deckel FP4M type. The machine is at least technically tested in our workshop and is therefore fully functional. We look forward to your inquiry! Delivery time: on request Machine no. xxxx-xxxx Year of manufacture: xxxx Table design: rigid Lasdpelrw Tisfx Ampja Speed: 50 - 2500 rpm Feed: 8 - 630 mm/min Rapid traverse: 1300mm/min Drive power: 3.7kW / 4.4kW Rapid traverse: 1300mm/min Travel paths X/Y/Z: 500/400/400mm Tool holder: SK40 Tightening system: M16 Quill stroke vertical: 90mm Weight: approx. 1.6t Other equipment and accessories: on request Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can overhaul the selected machine completely or in part - You are free to choose the paint color of the selected machine decide - If you wish, you can order additional accessories such as tools etc. directly - If you wish, we can install additional accessories such as safety devices etc. - We will be happy to take care of the shipping and/or delivery

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, quill stroke: 60 mm, total height: 1,935 mm, total length: 2,000 mm, total width: 200 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, type of input current: three-phase, overall weight: 1,445 kg, table length: 460 mm, workpiece weight (max.): 400 kg, table load: 400 kg, table width: 800 mm, year of last overhaul: 2013, warranty duration: 6 months, The machine was completely and professionally overhauled by us in 2013. We were able to repurchase the machine from a customer who had used it very little, and we fully serviced and inspected it. Control 3-axis - Active - Digital display HEIDENHAIN TNC 113 Speed 50 - 2500 rpm, geometrically stepped direct drive with 18 speed stages for maximum torque / milling performance Feed 6.3 to 630 mm/min, steplessly adjustable Rapid Traverse 1.3 m/min Quill Extendable quill, vertical 60 mm, SK40 with M16 drawbar thread, optionally: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z 500/400/400 mm Table Rigid angle table 800x460 mm Equipment • Vertical and horizontal spindle Lajdpfx Amsyitxqjpoa • Milling head manually swivels +/- 90° • Central lubrication Options • Z-axis bellows • Chip tray • Machine lamp • Universal table • Rotary table • Slotting head • Dividing attachment • Counter-holder • etc.

Condition: new, Year of construction: 2026, General refurbished, as good as new machine, modernized to the legally prescribed safety standard "state of the art" according to the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS active - digital display Speed 50 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling performance Feed rate 6,3 to 630 mm/min, infinitely variable rapid traverse 1,3 m/min Ljdpfxeh R S Tcj Ampeaa Quill Extendable quill, vertical 60 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 500/400/400 mm Table Rigid angular table 800x460mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, F736 Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 Retrofit at FA Huttelmaier Very good CONDITION Technical data: >> Year of construction 1985 Machine no. 2102-2891 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 Ljdpfeu Nvwvox Ampsaa >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC111 >> Coolant device >> Operating instructions, spare parts plan To the machine : Universal milling machine Deckel FP1 built in 1985 in very good condition. The FP1 was overhauled by Huttelmaier in 2008. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed rate is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout, Special Paint Finish in Light Grey, CE Compliant!!! Technical Specifications: - Year of manufacture: 1987 Machine no.: 2203-2790 - Rigid angle table (freshly planed) - Spindle speed: 50–2500 rpm - Feed rate: 8–630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel X/Y/Z: 500/400/400 mm - Vertical milling head on column adjustable by 150 mm - Vertical and horizontal quill – SK40 - Vertical quill extendable by 90 mm - Drawbar thread: M16 - Weight approx. 1500 kg Accessories & Features: - 3-axis Heidenhain digital readout - Coolant system - Chip tray - Central lubrication system About the machine: Laedpfexctyajx Ampea For sale is a Deckel FP4M universal milling machine, CE compliant and in very good condition. The machine has been partially overhauled, displays minimal backlash on the handwheels, and all lead screws move smoothly and evenly. Even at maximum speeds, the milling machine runs quietly. Rapid traverse is available on all axes; all bellows are new. The rigid angle table has been freshly planed. This is a reliable and user-friendly machine. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on site.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Deckel FP4MK with 3-Axis Heidenhain Active Digital Readout in Light Grey, Very Good Condition, CE Compliant! Technical Data: >> Year of manufacture: 1992 Machine No.: 2203-8489 >> Fixed angle table >> Speed range: 50 – 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved on the spindle carrier >> Vertical quill and horizontal quill – ISO 40 taper >> Vertical quill extension: 90 mm >> Hydraulic drawbar system >> Weight approx. 1,600 kg Lsdpfx Asw Evq Asmpjaa Accessories and Features: >> 3-axis active digital readout (Heidenhain) >> Coolant system >> Chip tray >> Centralized electric lubrication >> Operating manual, spare parts diagrams About the Machine: Offered is a Deckel FP4M Aktiv universal milling machine in very good condition, CE compliant. The machine has very little backlash in the handles, and all spindles move smoothly. Even at maximum speeds, the milling machine runs quietly. It features a hydraulic clamping system. On this newer FP4 model, the feed is infinitely variable on all three axes, and each axis has rapid traverse. A major advantage is the active 3-axis digital readout. With this Heidenhain linear control, you can input dimensions that the machine will approach automatically. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and more precise. Take the opportunity to view and test the machine under power on site.