Used Deckel Fp 4 At for sale (692)

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 2 Year of manufacture: 1976 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. No.: 6976 Kwsdpfx Adod Tytyjtet with guarantee geometric acceptance with test report Accessories: - 3-A digital display FAGOR Innova 30i-M, new - Fixed table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Coolant system - Operating instructions -used, as seen-

Condition: reconditioned (used), Year of construction: 1978, Universal tool milling machine Make: DECKEL Model: FP 2 stepless Year of manufacture: 1978 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. no.: 2202-10147 with guarantee geometric acceptance with test report Kjdpfxsfcqfpo Adtswt Accessories: - 3-axis digital display HEIDENHAIN ND 780 - Universal table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawing thread S 20 x 2 - Central lubrication, manually operated - Coolant system - Operating instructions - Used, as seen -

Condition: reconditioned (used), Year of construction: 1983, Universal tool milling machine Make: DECKEL Model: FP 2 Active Year of manufacture: 1983 - overhauled, repainted RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2202-10799 Milling head type: 2271 Milling head number: 300-1406 with guarantee Kjdpofzk Hfofx Adtowt geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Fixed table 700 x 280 mm (T-slot: 12 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Central lubrication, manually operated - Coolant system - Operating instructions - Used, as seen -

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 L Active Year of manufacture: unknown - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2302-2319 Milling head type: 2271 Milling head number: 700-0883 with guarantee geometric acceptance with test report Accessories: Kwodpeh Rv U Ejfx Adtot - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Central lubrication, electric - Coolant system - Operating instructions - Drill grinding device with diamond disk -used, as seen-

Condition: good (used), Year of construction: 1962, Spindle mounting, vertical + horizontal SK / ISO 40 Angular table clamping surface 700 x 285 mm X-axis travel 500 mm Y-axis 200 + approx. 250 mm Z-axis 400 mm Quill stroke approx. 80 mm 18 main spindle speeds 40 - 2000 rpm 18 feed speeds 8 - 400 mm/min rapid traverse 1200 mm/min drive power 2,2 kW Kwjdpfsm Uygvex Adtst dimensions L x W x H 1150 x 1050 x 1650 mm Machine weight 1000 kg Accessories / special features: - Vertical milling head, swiveling R/L - Fixed angle clamping table - Feed + rapid traverse in all axes Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), Deckel FP 2 NC Universal Milling Machine Universal Milling Machine TNC 320 / 321 Travel distances: x- 300mm | y- 300mm | z- 400mm Kwodpfexfkm Aox Adtjt Stepless spindle speed 31.5 - 5000 rpm Feed rates 2-4000 mm/min Rapid traverse 4000 mm/min Tool holder SK 40 Quill stroke 80 mm Machine weight 1350 kg You are welcome to arrange an inspection appointment. We can also organise affordable shipping for you! You will receive a proper invoice. For international customers, we can also provide a net invoice. The requirement is a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers. The specified company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Variations in technical data or errors in the description of the item may occur and are subject to change.

Condition: good (used), Accessories and spare parts for Deckel FP milling machines: Rotary table 400 mm 31 holders ISO 40 S 20 with cutters Drill-milling head FP2-3 Intermediate block Table FP2, Table FP3 Pallet with used accessories Drawer cabinet with a large amount of accessories: Collets long 328E 31 pcs, collets MK4 9 pcs, reducing sleeves ISO 40-MK4. Holders ISO 40 long 16 pcs. Driver rings, special holder ISO 40 S 20 1 set, collets 462 E. Drawer with bushings, machine feet, counterholders etc., to be sold as a lot Kedpsx Hpd Esfx Adtswt

Condition: excellent (used), DECKEL FP 2 LB Tool Milling Machine from University in Well-Maintained Original Condition - 3-axis digital readout "ACURITE" - Travel (X/Y/Z): 795x300x400mm - Automatic feeds / rapid traverse on all 3 axes (18 settings) - Spindle speeds 40-2000 rpm (18 steps) - Horizontal and vertical milling attachments - ISO 40 tool holders - Table clamping surface: 1000x440mm - Table clamping surface with auxiliary table: 1000x700mm - Swivelling vertical head with quill - Coolant system - Various tool holders Kwsdpfxox Da Ere Adtjt - Machine light - Documentation Dimensions: LxWxH: 2.5x2.4x1.8 meters / Weight: 2200 kg Errors and omissions excepted.

Condition: good (used), TOOL MILLING MACHINE DECKEL FP 1 Kodpfx Adjx A D Nfotowt - Travel X/Y/Z: 245-150-340 mm - Without vertical head / Machine was used exclusively for horizontal milling operations - Speed range: 95 - 1900 rpm - Dividing head - Automatic feeds on X & Y axes - Various collets and tool holders - Documentation included Dimensions: LxWxH 1.1x0.9x1.6 meters / Weight: 600 kg Errors and omissions excepted

Condition: good (used), Tool Milling Machine / DECKEL FP 2E – from training facility - Travel paths X/Y/Z 400x200x400mm - Automatic feeds + rapid traverse on X/Z axis - Speed range 40-2000 rpm - Tool holder ISO 40 - Vertical/horizontal milling attachment - Swiveling vertical head with quill - Machine with sliding head / extended Y-axis travel - New control cabinet - Coolant system - Chip tray - Documentation Dimensions: LxWxH 1.5x1.6x1.8 meters / Weight 1500 kg Errors and omissions excepted. Kwsdpfx Aexga Tuedtst

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, total length: 1,000 mm, total width: 900 mm, total height: 1,600 mm, spindle speed (max.): 1,900 rpm, machine/vehicle number: 50025, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Placing a bid obligates you to collect the machine on time between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Spindle speed: 19 – 1,900 rpm MACHINE DETAILS Ksdpoxqmpdjfx Adtowt Dimensions & Weight Dimensions (L x W x H): 1,000 x 900 x 1,600 mm Weight: 700 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: R0101, travel distance X-axis: 800 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 2,000 rpm, table length: 1,000 mm, table width: 520 mm, No reserve price – guaranteed sale to the highest bidder! Kjdpfx Adjxm Scujtswt The payment deadline for the machine is 20/11/2025! Bidding obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Travel distances X-axis travel: 800 mm Y-axis travel: 300 mm Z-axis travel: 300 mm Spindle Maximum spindle speed: 2,000 rpm Minimum spindle speed: 25 rpm Chuck diameter: 40 mm Work table Table width: 520 mm Table length: 1,000 mm MACHINE DETAILS Dimensions (L x W x H): 2,500 x 2,000 x 1,800 mm EQUIPMENT Collets Additional milling table (table dimensions: 700 x 240 mm) Large machine vice (jaw width: 200 mm)

Condition: good (used), functionality: fully functional, Universal table for DECKEL ; FP - Milling machines . Dimensions : 80 x 240 cm . Kwodpexw Nnvjfx Adtjt

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 2102-2641, Deckel FP1 Actif toolroom milling machine in very good condition. Machine Nr.2102-2641. Year of contruction 1985 Specifications: - Machine speed: 40 - 2000 rpm - Power feed X/Y/Z infinitely variable - Rapid feed X/Y/Z - X / Y / Z: 300/160/340 mm - Spindle brake - Spindle nose vertical and hor. SK40/S20x2 - Weight about 800 Kg Accessories and equipment: - 3-axis actif digital readout Heidenhain TNC113 - coolant system Kwsdpfx Adef E Ilzetst - machine books Offered universal milling machine Deckel FP1 aktif, is in very good condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs quietly. All guideways are in very good condition. This machine has also rapid traverse in three axes. Machine is mechanical and electrical complete checked and tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Condition: used, Universal Milling Machine DECKEL Type FP 1 Universal milling machine Ksdpfx Ader U St Uotowt Machine No. 2101 – Year of manufacture: 1979 Manual travel X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.5 and 1.9 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at the vertical milling head: 60 mm - Vertical milling head can be swiveled and extended horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated in the machine base - Standalone control cabinet - Original chip tray for mounting on the machine base - Electrical schematic available Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg Good condition

Condition: used, Slotting head, suitable for DECKEL type FP 2 milling machine Manufacturer No. 2211 / 1895 Dovetail width: approx. 76 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 320 mm Dovetail leading edge to gear center: approx. 235 mm Kwedpfxswbi Rbs Adtot Stroke size: max. 80 mm Stroke rate: max. 210 double strokes/min. Tool holder: square, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Driven by the machine gear, within the dovetail guide (as with a normal vertical head) - This slotting head is inserted into the dovetail guide in place of the normal vertical milling head (Mounted in place of the vertical milling head, milling head) - Drive gear in the slotting head, 39 teeth, gear width 16 mm, presumably 20° pressure angle - Slotting head on the flange plate can be rotated 360°, degree scale +/- 35° Weight: 32 kg Very good condition DECKEL FP1 has a pressure angle of 15° on the drive gear DECKEL FP2 + FP3 - has a pressure angle of 20° on the drive gear

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 - Year of manufacture: 1979 Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Kwjdpfjr D T U Dox Adtot Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 / 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox stages - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm - Fixed angle table 600 x 210 mm - Coolant system in the machine base - Separate control cabinet - Original chip tray mountable on machine base - Wiring diagram available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg In very good condition

Condition: used, Universal Tool Milling Machine with Active Digital Display DECKEL Type FP 1 Universal Milling Machine Machine No. 2102 - 3322 Year of manufacture: 1986 Travel distance X: 300 mm, Y: 150 mm, Z: 330 mm Table size: 600 x 210 mm Spindle mount: SK 40 - S20x2 Spindle speed: 40–2000 rpm, 16 steps Feed (X and Y axes): 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.6 and 2 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz Kwodper D T Uyjfx Adtjt - HEIDENHAIN active 3-axis digital readout, type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Spindle speed via 2 motor speeds and 8 gearbox steps - Quill travel on vertical milling head: 60 mm - Vertical milling head swiveling and extendable 100 mm horizontally - Fixed angle table 600 x 210 mm - Coolant device integrated in machine base - Separate electrical cabinet - Original chip tray for mounting on machine base - Operating manual, electrical diagrams, and spare parts list available Space requirements (L x W x H): 1350 x 1100 x 1700 mm Weight: 830 kg Good condition

Condition: used, Year of construction: 1979, x-travel 800 mm y-travel 300 mm z-travel 400 mm turning speed range 25 - 2.000 U/min power capacity 4 kW feed 5 - 500 m/min rapid traverse 1,5 m/min work table: 1.000 x 700 tool taper SK40 weight 1,8 t dimensions of the machine ca. 2,50 x 2,40 x 2,00 m The machine is in good condition. The digital display is defective (the scales are ok) Kwsdpfx Ajwwwqhsdtet Extra interchangeable milling head. No accessories.

Condition: used, x-travel 390 mm y-travel 200 mm z-travel 390 mm table-size 775 x 330 mm spindle taper ISO Sk 40 spindle turning speed range 40 - 2000 U/min quill stroke 40 mm total power requirement 2,2 kW weight of the machine ca. 1,4 t Kwedpjxfb Hgofx Adtot dimensions 1,75 x 1,5 x 1,8 m Universal Milling Machine - Digital Display - Chip Guard - Coolant System - Machine Light - Chip Tray - Machine Feet - Operating Instructions

Condition: used, Year of construction: 1986, functionality: fully functional, x-travel 710 mm y-travel 600 mm z-travel 500 mm Kwsdpfxewu Dfms Adtet NC rotary table 630 mm Spindle taper SK 40 Spindle speeds 18 - 6300 rpm DIALOG 4 control Feed rate 2 - 3600 mm/min Rapid traverse 6 m/min Max. table load 485 kg Swivel stroke 80 mm Spindle motor 9.5 kW Total required power 20 kVA Machine weight approx. 4.6 t Dimensions L x W x H 3.8 x 2.24 x 2.35 m Accessories: LNS Fox ws 2-1500 filter unit with 2 new filters in box, 2 cabinets full of tools This machine is stored at our facility.

Condition: used, tool adaptor 88 length 560 mm center height of top slides 65 mm weight 17 kg Counter holder / horizontal milling device for tool milling machine Deckel Mod. FP 1 consisting of upper beam and mounting of the milling arbor. The distance from the middle of the milling arbor to the lower edge of the counter holder is Ksdpfx Adsv Dxzcstswt 65 mm, the width of the guide is 88 mm. Machine dealer with own stock of 1600 m².

Condition: good (used), x-travel 300 mm y-travel 340 mm z-travel 250 mm Kedpoucphxefx Adtowt total power requirement 1,5 kW weight of the machine ca. 0,8 t Heidenh. 3 axes aktiv digital display Year of construction unknown

Condition: good (used), Friedrich Deckel FP 2 LB Toolroom Milling Machine The accessories are not included in the scope of delivery but can be purchased separately. The Deckel FP 2 LB universal milling machine is characterized by its extremely stable base frame and is designed as a traveling column machine. This means that the machine maintains its precision even when machining heavy workpieces weighing up to 1000 kg. Another feature is the 45-degree inclined bed. After removing the universal table, this design allows for the direct clamping and machining of V-engine blocks with a 90-degree cylinder angle, such as those found in American V8 engines. The long travel of 800 mm is also advantageous in this application. Technical Specifications: Kjdpfsgyw S Tsx Adtewt Deckel Universal Milling Machine FP 2 LB Digital Display: 3-Axis Digital Display Heidenhain X-Axis Travel: 800 mm Y-Axis Travel: 300 mm Z-Axis Travel: 400 mm Tool Holder: SK 40, Drawbar Thread S 20 x 2 Milling Head Type: Vertical Milling Head Speed Range: 40 - 2000 rpm Number of Steps: 18 Table Type: Universal Swivel/Tilt Table (± 45° / ± 15°) Table Clamping Area: 1000 x 520 mm T-Slot Size: 16 mm Vise 160 mm Power Consumption: 9.5 kVA Weight: Approx. 1900 kg Dimensions: Approx. 1570 x 1675 x 1850 Other Items - New and Used - can be found in our shop! International shipping costs on request!

Year of construction: 1968, condition: used, Cover milling machine FP1 with 3 axis digital display 380V Machine no. 37729 120-1900 rpm Kwedpfx Aopmrpxjdtjt Travel X-axis:300 mm Travel Y-axis:150 mm Z-axis travel:340 mm Tool holder: MK 4 with tightening thread S 20 x 2 Milling head type:Vertical milling head Table type:Fixed table Table clamping surface:600 x 210 mm T-slot size:12 mm X-axis feed:290 mm Y-axis feed:150 mm Z-axis feed:330 mm Weight:700 kg Cover milling machine FP1 ID: M100000409