Used Dec Board for sale (12,961)

Condition: used, Board sorting line for both wet and dry sawn wood with 41 fall pockets and hydraulically operated bottom discharge. Capacity approx 50000 m3 of sawn wood per year and single shift Line consist of below main parts: - Intake for both dried/wet packages or directly from sawline. - Pocket section with overlaying conveyor for boards and bottom side conveyor. Ibedpfxsvirfre Aacoc - Lumber stacker with automatic laying of sticks between the layers. - Press and strapping system for ready made packages - Chipping station for off cuts.

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm Ijdpfxjnygvrs Aacobc 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: used, functionality: fully functional, Julabo RD Keypad and Presto Chiller Digital Controller and board. Good working condition. Please check out our other listings as well. Ijdpfet Dag Nox Aacobc

Condition: used, Length: 3,80 m Height: 1,80 m Ibsdpsgri Nrefx Aacjc Width: 1,40 m Lifting capacity: 1500 kg Electric motor: 1,1 kW Board package lifting table.

Condition: new, Year of construction: 2023, functionality: fully functional, It is a perfect complement to obtain the desired width product from the edged plates. While providing ease of use with its simple, compact and versatile designs, it can be integrated into the existing facility of any business thanks to its easy assembly. - Models with 120-160 mm cutting heights - Possibility to apply 2 or 3 saws to the movable and fixed sleeve - Manual or automatic feeding Iodporzakmjfx Aacobc - Automatic fueling - Possibility to process 1000 mm wide products Optional equipment; - PLC controlled manual or automatic feeding - Up to 3 axis movable saw option - Removal of waste from the system thanks to separator arms - Cutting easily and in the most efficient way with the alignment arms. Technical Specifications Max. Cutting Height : 120 mm / 160 mm Min. Cutting Height : 15 mm Max. Cut Width : 800 mm Max. Working Width : 1000 mm Min. Cut Length : 800 mm Max. Feed Rate : 40 m/min Saw Rotation Cycle : 3000 rpm Upper Rollers : 2 x 240 Bottom Rollers : 5 x Ø135 mm (120)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, cutting height (max.): 85 mm, saw blade diameter: 350 mm, cutting width (max.): 450 mm, power: 15 kW (20.39 HP), FOUR-SAW BOARD PTF EDGER in very good condition. Working 1,5 years. After saw a brush system to clean boards from sawdust. Ibjdpfxov Hbb Ro Aacsc

Condition: new, Year of construction: 2024, type of input current: three-phase, sheet thickness steel (max.): 2 mm, total width: 3,000 mm, total length: 32,000 mm, total height: 2,400 mm, coil weight: 6,000 kg, The roll forming line for the production of Scaffolding Systems. Ijdpfxetq Sb Ro Aacobc The line produces a perforated scaffolding profile in 24 stations. The line consists for Decoiler, Staightener, Servo Feeder, Mechanical Press, Perforating and Embossing Tool / Die and Roll Form Machine. For more, please contact us.

Year of construction: 2025, condition: used, PC Board breaking and recycling systems - pre - breaking machine Ibjdpjtuuh Uofx Aacjc

Condition: used, kW: 2,2 Lift arms: 1350 mm Width: 2700 mm The board lift is in working order. Used for pack lifting before planer. Ibedjgri A Eepfx Aacjc

Condition: used, The stamp machine was used in the planing line. Ibjdpsgri Ncjfx Aacoc

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,510 h, functionality: fully functional, machine/vehicle number: 11670000823, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 180, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Drive: Variable-speed asynchronous motor with liquid cooling Control: Sinumerik 840D powerline Work spindle Tool holder: HSK-A63, hydraulic-mechanical tool clamping Spindle speed: 0 – 10,000 rpm, continuously programmable Feed Drive: AC brake motors on the X, Y, Z, and B axes Feed range on the X, Y, and Z axes: 0 – 60,000 mm/min Rapid traverse on the X, Y, and Z axes: 80 m/min Measuring system Resolution on the X, Y, and Z axes: 0.001 mm Position tolerance on the X, Y, and Z-axis: 0.008 mm Pallet Number: 2 Size: 630 × 630 mm Hole pattern: 108 × bushing Ø 16.02 H6 Centering bushing: Ø 16.02 H6, 38.5 mm deep NC rotary table Iedpsxf Htxjfx Aacjbc Max. tabletop rotation: 30 rpm Tabletop holding torque at 40% duty cycle: 5,000 Nm Tabletop holding torque at 100% duty cycle: 3,250 Nm Workpiece weight Per pallet: max. 800 kg Difference with different loads: max. 800 kg Tool magazine Type: Vertical chain magazine HSK-A63 Positions: 180 Tool changing system: Double gripper Max. tool diameter standard: 80 mm Max. tool diameter with free adjacent positions: 160 mm Max. Tool length from spindle nose: 550 mm Max. tool weight: 12 kg Max. magazine load: 630 kg MACHINE DETAILS Space requirement: 6.0 x 6.0 m Height: 3.2 m Weight: 18 t Power requirement: 71 kVA Machine dimensions: approx. 4.7 x 5.6 x 3.2 m EQUIPMENT - Internal coolant supply - Chip conveyor - Belt filter system - Cooling unit - Rotoclear - Tool breakage detection (laser) - Mist separator - Measuring probe - Handheld control unit - Flushing gun - Blow-air cooling system - 4-color signal lamp - Dynamic package

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 2930 mm Measurements depth 3210 mm Measurements height 2900 mm Machine weight 9200 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 28000 rpm Spindle motor power 38/28 kW Tool taper HSK-A63 Number of axis 5 Movement Iodpfexn U A Hox Aacjbc X-Axis Movement 450 Y-Axis Movement 600 Z-Axis Movement 400 Table Outer length 400 mm Outer width 400 mm Number of tslots 5 Distance between 63 mm Media Chip conveyor Yes Internal cooling Yes Additional Equipment Tool Storage Capacity: 30 tools /Max Tool Weight: 6 kg / Max Tool Diameter: 80 mm / Max Tool Length: 250 mm Graphite Dust Collector Heidenhain Touch Probe TS 649 3D Quick Set for 5-Axis Calibration This 5-axis DMG DECKEL MAHO HSC 55 linear vertical machining centre was manufactured in 2008. Consider the opportunity to buy this DMG DECKEL MAHO HSC 55 linear vertical machining centre if you are looking to get high quality milling capabilities. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller model: Heidenhain Mill Plus, table width: 500 mm, table length: 500 mm, rotary table diameter: 500 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 17,618 h, coolant supply: 40 bar, spindle nose: SK40 (DIN69871), number of slots in tool magazine: 60, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The 5-axis DMU50 eVolution has been removed from production in working order and can also be seen in operation in our showroom (by appointment). The machine is equipped with 40 bar internal spindle cooling, chip conveyor, 60-tool changer, Renishaw tool setter, Heidenhain 3D probe, 18,000 RPM spindle, Visiport, and original factory extraction system. Iodjxnixispfx Aacobc

Condition: good (used), Year of construction: 1990, CNC milling machine, lid, FP4-AT, 3 axes X 560/Y500/Z450 speed range 40-4000 min-1 control Contur-3, SK-40 record, weight 3.4 tons. Isdpfjdygdhjx Aacsbc

Condition: used, DECKEL MONITOR SCREEN DIALOG FP2 / FP3 Ibsdpfxjxn Tzzj Aacjc

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, turning length: 600 mm, turning diameter: 400 mm, spindle bore: 73 mm, controller model: ELTRO MPULS, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning diameter: 400 mm Turning length: 600 mm Swing diameter: 600 mm Ibodpfjxn I Sbjx Aacsc Spindle bore: 73 mm MACHINE DETAILS Control model: ELTRO MPULS

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 11035534144, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, spindle speed (max.): 9,000 rpm, No reserve price – guaranteed sale to the highest bidder! The payment term is one week after purchase of the machine! Bidding obligates the buyer to collect the machine on time between 17.11.2025 and 21.11.2025! TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Rapid traverse X-axis: 12 m/min Rapid traverse Y-axis: 12 m/min Rapid traverse Z-axis: 12 m/min Feed rate in X, Y, and Z axes: 10,000 mm/min Maximum spindle speed: 9,000 rpm Tool holder: SK 40 Max. tool length from spindle nose: 290 mm Max. tool weight with automatic tool changer: 6 kg Max. total tool weight in magazine: 50 kg Clamping area: 700 x 500 mm Rotary range: 360° Swivel range: +95/-10° Permissible worktable load: 200 kg MACHINE DETAILS Control model: SIEMENS SINUMERIK 810 D Dimensions & weight Dimensions (L x W x H): 2,300 x 2,000 x 2,300 mm Total weight: 5,000 kg EQUIPMENT 16-position tool changer Isdpsxm T I Ejfx Aacjbc Rotary table with swivel axis Mechanical table plate clamping Note: The machine vices shown on the table are not included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 1999, Control Unit Brand HEIDENHAIN Model 426 This 5-axis DECKEL MAHO DMU 80P was manufactured in 1999. It features a Heidenhain 426 control system, a 30-slot tool magazine, and a SK 40 toolholder type. The spindle cooling is capable of 40 bar, enhancing its performance for complex machining tasks. Consider the opportunity to buy this DECKEL MAHO DMU 80P universal machining centre. Contact us for more information about this machine. Application Types Ibodsxn Uyfepfx Aacjc Milling

Condition: excellent (used), travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, controller model: Heidenhain TNC 426/430M, total height: 2,300 mm, total length: 2,200 mm, total width: 2,200 mm, table width: 700 mm, table length: 500 mm, table load: 200 kg, overall weight: 3,000 kg, spindle speed (max.): 9,000 rpm, operating hours of spindle: 10,292 h, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 16, input voltage: 400 V, Equipment: documentation/manual, This Deckel Maho DMU 50T comes from a training department and has therefore never been used as a production machine. The machine is still in very tidy condition; both the axes and the spindle run very smoothly. Equipped with a Heidenhain electronic handwheel. Iedpfoxlquaex Aacebc Dimensions: 2200x2200x2300 mm (LxWxH) Weight: approx. 3000 kg

Condition: good (used), branded engraving milling machine, cover GK12 with accessories Ijdpfx Aaeu T Nffscjbc

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 2881-0191, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, controller model: SIEMENS DIALOG 112, spindle speed (max.): 8,000 rpm, No reserve price – guaranteed sale to the highest bidder! Payment is due one week after purchase of the machine! Placing a bid obligates you to collect the machine on time between 17/11/2025 and 21/11/2025! TECHNICAL SPECIFICATIONS Travel X-axis: 700 mm Travel Y-axis: 550 mm Travel Z-axis: 500 mm Feed rate X, Y, Z: 1 - 10,000 mm/min Rapid traverse X, Y: 30 m/min Rapid traverse Z: 20 m/min Setup mode speed X, Y, Z: 1 - 2,000 mm/min Table width: 550 mm Iodpfsxm Ty Isx Aacobc Table length: 900 mm Table load: 800 kg Max. setup height: 600 mm Distance spindle nose to table: 150 - 650 mm Max. spindle speed: 8,000 rpm Tool magazine positions: 40 Holder diameter: 40 mm Tool holder: SK 40 Max. tool diameter for standard tools: 80 mm Max. tool diameter for special tools with free adjacent slots: 140 mm Max. tool diameter for boring heads with free adjacent slots: 200 mm Max. tool length from spindle nose: 300 mm Max. tool weight: 12 kg Control model: SIEMENS DIALOG 112 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 3,300 x 2,900 mm Total weight: 8,000 kg EQUIPMENT Documentation/manual Chip conveyor Note: The magnetic clamping plate shown on the table is not included in the scope of delivery.

Condition: good (used), Year of construction: 1993, Graver grinding machine Ibodpfx Aasu T Nfxocsc Make: Deckel Model: S0 year of construction 1993

Condition: good (used), Year of construction: 1994, Graver grinding machine Make: Deckel Model: S0 Ibedpfx Aaou T Nf Sjcec year of construction 1994

Year of construction: 1969, condition: good (used), Univ. tool milling machine DECKEL type FP 1 Machine No. 37101 Year of construction approx. 1969 travel X: 300 mm Y: 150 mm Z: 340 mm table size 600 x 200 mm spindle mounting MK 4 - S20 x 2 Ibjdpfol Dx I Sjx Aacjc spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 1,0 and 1,5 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in machine base - pinol shift at vertical milling head 60 mm - adjacent control cabinet space requirement L x W x H 1000 x 900 x 1750 mm weight 690 kg good condition accessories: - collets - rotary table - vice - Counterholder H. Milling

Condition: good (used), Technical data Working area: 250 × 700 mm Copy table size: 430 × 600 mm Travel / working range longitudinal (X): approx. 322 mm Travel / working range transverse (Y): approx. 200 mm Spindle drive / power: approx. 1.5 / 1.7 kW Spindle speed: approx. 80 – 20,000 rpm Copy ratio (enlargement / reduction): 1:1 to 1:4 Ibodpfx Asxgh R Uoacjc Overall dimensions (approx.): 2,000 × 2,000 × 2,000 mm Weight: approx. 1,650 kg