Used Dc Servo Controller for sale (44,855)

Condition: ready for operation (used), Siemens 6BK1000-8AE60-1AA0 SN:VPB2857466 Box PC 827B (DC) , without hard disk , serial no. acc. to photo ,used, good condition, 100% functional, scope of delivery acc. to photos Iaedpfxoi Edlxs Ag Uol

Condition: excellent (used), Here we offer you an et ETSYSTEM Electronic Load GPIB. 32615A AC & DC Electronic Load GPIB/RS232 300V, 108A, 10800VA The 3260A series is a 300V high power AC and DC load in one unit and provides an ideal test solution for UPS, AVR and D/A inverters, especially for DUTs with step or square waveforms Each high power series AC&DC load has its own control and display panel and 5-state recall/memory, allowing for more efficient load setup Adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment Built-in GO/NG gauge test function provides short test result diagnosis for production and QC test throughput Features Voltage, current, wattage and VA variable display. CC, Linear CC, CR and Crest Factor modes. GPIB/RS232 interface and 5 status recall/memory. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W and ℃. Dual 4 1/2 meter display for voltage, current, watts and VA. Suitable for sine, square and step waves. Width 600 mm Height 1506 mm Depth 600 mm 196kg Type: 32615A AC & DC Electronic Load Condition: used / used Isdpfx Agem Tvyxo Uoal Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, TIG + Shielded Metal Arc Welding Machine MESSER GRIESHEIM Type Uniwig GW 280 AC/DC Serial No. 4930185 Year of manufacture: 1985 Performance for TIG welding: 280 amps at 80% duty cycle (AC) 250 amps at 100% duty cycle (AC) 230 amps at 100% duty cycle (DC) Performance for stick electrode welding: 250 amps at 100% duty cycle (AC) Iedpfxjxf Uw Ss Ag Uoal 200 amps at 80% duty cycle (DC) Adjustment range: 3 coarse steps and infinitely variable Power supply: 400 volts, 50 Hz - 4-meter hose package with TIG torch - 2-stroke and 4-stroke welding function - Weld time setting for spot welding - Water-cooled - Gas pressure regulator Required space (L x W x H): 1050 x 590 x 1000 mm Weight approx. 300 kg Good condition

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Gantry (Portal) machine, belonging to the line (SOFIT code: J10039) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader) Separate electric and command panel Iedol Hycwspfx Ag Ueal Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 10 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Condition: good (used), Year of construction: 2015, functionality: fully functional, type of input current: AC, input voltage: 400 V, ground cable length: 5,000 mm, type of cooling: water, TIG welding unit, water-cooled, DC/AC power source CITOTIG 350W AC/DC Welding current range 3...350A DC / 10...350A AC with 5m power cable with plug for mains connection 3 x 400V - Gas hose 1.5m - Ground cable with fixed clamp 5m, 50mm2 - Transport trolley TY2A - Coolant FREEZECOOL 10l - TIG torch CITORCH T 35W EB C5B, 5m water-cooled Iajdox A S Txepfx Ag Ujl - TIG torch CITORCH T 10W EB C5B, 5m water-cooled - Argon / CO2 pressure regulator

Condition: used, SIMATIC Panel PC 677 (DC) 12" Key For Weinig Unicontrol Order No. 6AV7801-0AA00-1ACO Serial No. SVPU9007218 PANEL 12" KEY 677/877 Mainboard CV3 with Profibus Cel M370 1.5GHz 400MHz 1MB SLC 256 MByte DDR2 533 SODIMM 40 GByte HDD SATA + DVD-ROM Windows XP Prof. MUI SP2 / 677 Ijdpfxoxytnrs Ag Ujal

Condition: ready for operation (used), Siemens 6BK1000-0AE40-1AA0 Box PC 627B (DC)SN:VPA6851923 , without harddisk , serial no. acc. to photo ,used, good condition, 100% functional, scope of delivery acc. to photos Iasdpfx Aoi Edk Ejg Ujl

Condition: used, Tapping chucks, thread chucks, tapping chucks, tapping attachments -with: slip clutch -Integrated reverse gear with: fast reverse Iodpfxodvkg Aj Ag Ueal -Thread sizes: M5-M18 -Recording: MK3 -Dimensions: 380/95 mm -Weight: 2.6 kg

Condition: used, WIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC) WIG Welding Machine Serial No. Year of manufacture: 2007 WIG output: 225 A = 40% duty cycle 180 A = 60% duty cycle 140 A = 100% duty cycle Electrode output: 180 A = 50% duty cycle Power supply: 400 Volt, 50 Hz, 16 Amp plug - DC welding unit - stepless power adjustment - 2-stroke and 4-stroke operation - HF ignition Iaodpfjrtvi Rsx Ag Uol - pulse welding mode - stick electrode mode - water-cooled - 8 meter WIG hose assembly with hand torch - shielding gas regulator - operating manual Space requirement (L x W x H): 1000 x 450 x 710 mm Weight: 90 kg The welding test produced very good results when welding stainless steel with DC. Otherwise in very good overall condition.

Condition: good (used), MERKLE Insquare W 300 AC/DC lasapparaat met originele kabelset Primair: Spanning: 3 x 400 V Frequentie: 50 (60) Hz Cos phi: 0,95 TIG DC stroombereik: Open circuit spanning: 80 V Werkspanning: 10-22,8 V Lasstroom: 5-320 A HSB 60% inschakelduur (10 min.) 320 A HSB 80% inschakelduur (10 min.) 300 A DB 100% inschakelduur: 260 A (40 °C) Primair continu vermogen: 9,5 kVA Primaire continue stroom: 13,7 A Primaire maximale stroom: 19 A TIG AC stroombereik: Open circuit spanning: 80 V Werkspanning: 10-22,8 V Lasstroom: 5-320 A HSB 60% inschakelduur (10 min.) 320 A HSB 80% inschakelduur (10 min.) 300 A DB 100% inschakelduur: 260 A (40 °C) Primair continu vermogen: 9,5 kVA Primaire continue stroom: 13,7 A Primaire piekstroom: 19 A MMA-lassen: Stick-elektroden: 1,5-6 mm Open spanning: 80 V Werkspanning: 20-32,8 V Lasstroom: 5-320 A HSB 60% inschakelduur (10 min.) 320 A HSB 80% inschakelduur (10 min.) 300 A DB 100% inschakelduur: 260 A (40 °C) Primair continu vermogen: 13,1 kVA Primaire continue stroom: 19 A Primaire piekstroom: 22 A Lasproces: 10-standenschakelaar: TIG DC Min, TIG DC Plus, TIG DC Min met startpuls, TIG AC Geluidsarm, TIG AC Blokgolf TIG AC "Gebalanceerde TIG", Elektrode Min Elektrode Plus Elektrode "Sinusgolf" Elektrode Blokgolf Keuzeschakelaar 1: 10-standenschakelaar: Stroom 1, Tijd 1, Stijg- en daaltijd, Startstroom, Eindstroom, Ontstekingspuls, Punttijd, Gasvoor- en nastroomtijd Keuzeschakelaar 2: 9-standenschakelaar: Stroom 2, Tijd 2 (voor pulsmodus), AC Balans, AC Frequentie, Hotstarttijd en -stroom, Stroominstelling, Elektrode d, Display U Instellingen: 2 draaiknoppen voor keuzeschakelaars 1 en 2 Displays: 2 LED-displays met voorloop- en hold-functie voor stroom, spanning, tijd Tijdfuncties: 4-standenschakelaar: UIT, langzame puls, snelle puls, puntlassen Ontsteking: 4-standenschakelaar: UIT, hoogfrequent, Lift-Tig Energieregeling: 4-standenschakelaar: op het systeem, hand- of voetafstandsbediening, lastoorts Bedrijfsmodus: 4-standenschakelaar: 2-takt, 4-takt, 4-takt met 2 stromen, gastest, test, programma Programmageheugen: 20 vrij toewijsbare geheugenplaatsen AC-frequentie: 50-200 Hz AC-balans: 9-91% Gasvoorstroomtijd: 0-3 s Gasnastroomtijd: 0-25 s Stroomstijgingstijd: 0-2 s Stroomdalingstijd: 0-20 s Ontstekingspuls: 0-100 ms Puntlastijd: 0,1-2,5 s Langzame pulsen: 10 ms-2,5 s Snelle pulsen: 50 Hz-5 kHz Hotstarttijd: 0-1,5 s Hotstartstroom: 10-200% Stroominstelling: 100-250% Knop: Testbeveiliging Knop: Programmaselectie LED: Netspanning AAN, Overtemperatuur, Storing, Beveiligingscircuit, Display hold, Startstroom Stijging, Stroom 1, Stroom 2, Reductie, Eindstroom Stroombron: IGBT-omvormer Ontsteking: Hoogfrequent of Lift-Tig Norm: EN 60974-1 "S" / CE Toortsaansluiting: EURO-centrale aansluiting met 5-polige stekker Toortskoeling: Watergekoeld koelsysteem 50 mm² aansluiting: Werkstukkabel 50 mm² aansluiting: Elektrodelaskabel Iasdpfsl Sm Hbsx Ag Usl Netaansluiting: 4 x 4 mm², 5 m lang Gasaansluitslang: 2 m Gewicht: 130 kg (300 AC/DC) Afmetingen L x B x H: 910 x 600 x 910 mm met gasfleshouder Gasfleshouder: 10 - 20 - 50 l gasfles Vind meer artikelen - nieuw en gebruikt - in onze shop! Internationale verzendkosten op aanvraag!

Condition: new, functionality: fully functional, As a machine dealer in Offenburg, we offer premium welding machines from Rehm. Many machines are immediately available from stock. We are also happy to advise you with regard to individual wishes and requirements. Give us a call. Technical data Model: 280 AC/DC Setting range TIG [A]: 3-280 Electrode (BOOSTER) [A]: 3-280 Duty cycle (ED) at Imax. (10 min.) TIG [%]: 100 Electrode (booster) [%]: 60 Welding current at 100 % duty cycle at 40°C TIG [A]: 280 Electrode (booster) [A]: 260 Fuse protection (slow) [A]: 16 Torch cooling: Water Protection class: IP 23 Power factor [cos phi]: 0.96 Power consumption at Imax. [kVA]: 11.9 Mains voltage [V]: 3 x 400 Mains frequency [HZ]: 50 Control socket [pol.]: 12 Welding cable socket [mm]: 13 Weight [kg]: 27 Dimension [mm]: 520 x 360 x 460 Possible accessories: Iaodpow Eil Tefx Ag Usl Hand burner earth cable Pressure reducer Available immediately. For collection by the customer. Forklift available. Shipping is also possible.

Condition: good (used), Water cooled TIG welder Kjellberg KU 262 Iodpsg Tvvrofx Ag Ujal Technical data see photos Instruction manual available

Condition: ready for operation (used), Siemens 6BK1000-0AE40-1AA0 Box PC 627B (DC) SN:VPB5856631 , without hard disk , serial no. according to photo ,used, good condition, 100% functional, scope of delivery according to photos Iasdpfx Agoi Edkps Uel

Year of construction: 2013, condition: excellent (used), From company liquidation: Kjellberg TIG 321 AC/DC Year of manufacture 2013 Isdpfohp U Rmex Ag Ujal Pulse function HF ignition Water cooling Welding range: 5-320Ampere 320Ampere at 45% ED complete, with 4meter torch, ground cable and pressure reducer Dimensions in mm approx. 1100x510x810 --Very well maintained unit-

Condition: used, TIG Welding Machine MESSER GRIESHEIM Type Combitig GW 23 AC/DC The machine only operates with direct current welding and contact ignition Serial No. 445276 Year of manufacture: approx. 1990 Output: 230 Amps = 35% duty cycle 180 Amps = 60% duty cycle Iaodpfxedzqa Is Ag Ujl 140 Amps = 100% duty cycle Infinitely variable setting range Current type: DC Mains connection: 400 V, 50 Hz, 32 A plug - 2-stroke / 4-stroke welding mode - DC welding with contact ignition works - AC welding and high-frequency ignition do not work - 7 meter hose package with hand torch - Connection plug for remote potentiometer (foot pedal) – foot pedal not included - Air-cooled - Gas pressure regulator Required space (L x W x H): 850 x 480 x 600 mm Weight: approx. 90 kg The welding test shows good results when welding stainless steel with DC; the HF ignition does not work, but the arc can be ignited via brief contact. When welding aluminum with AC, no arc is formed.

Condition: new, maximum load weight: 29,429 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, Equipment: ABS, Schmitz Cargobull SCS 24/L - 13.62 -long-term rental- * XL certificate * Beverage certificate * DC 9.5 certificate * Pallet stop bar on both sides * Sliding roof * 4 rows of aluminum slats * Lift axle * Branded tires (Hankook or similar) Iajdpfxevv I Ebe Ag Usl * Tool box * 4 loading rails + 2 load securing bars * Front release device * Crossover plate on the last floor plate * Swedish lights Long-term rental + hire purchase possible (subject to credit check) Subject to errors and prior sale! Location: Traxxo GmbH, Auf dem Wörth 2-4, 67240 Bobenheim-Roxheim Subject to prior sale and errors are expressly reserved! Sale exclusively in accordance with our terms and conditions Important note? Important information: Despite careful checking of all details in our offer, errors may creep in. These are sometimes caused by transmission errors in the systems of the various platform providers. We would therefore like to point out that all information is provided without guarantee and does not represent a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not represent any guaranteed properties.

Year of construction: 2015, condition: ready for operation (used), 1) Eccentric screw pump Johstadt AFJ 70.1 S, year of manufacture: 2011. 2) Eccentric screw pump Johstadt FJ 70.1 S, year of manufacture: 2015. 3) Eccentric screw pump Stöber/HEW/Netzsch DC30-2061-200-U/EEXF100L/U/NE40B, year of manufacture: 1989. 4) Centrifugal pump Stork CN32-200G1S3L1, year of manufacture: 1997. 5) Centrifugal pump Siemens&Hinsch m.b.H/Loher&Söhne AKHK6101/eA132 MA-U, year of manufacture: 1970. 6) Centrifugal pump with electric motor EMK/SPX EC2-HS160M1-2/CC40-200 R6S2L2. 7) Electric motor Siemens 1LA2 130-2CA60, year of manufacture: 1997. 8) Electric motor VEM. VEM electric motor. 9) Electric motor with gearbox Nord SK 132 S/4-2 TF, SK 33-132S/4-2 TF, year of manufacture: 2011. 10) Blower Gebhardt Ventilatoren KEM 61-0200-4 X-14-11. 11) Side channel pump SERO/HEW SVM 111 K,V,60-2,32 Dex 80L/4K, year of manufacture: 2015. 12) Side channel pump SERO/VEM SVM 111 K,V,60-2,32 kPER 80G4 FDS, year of manufacture: 2013. 13) Electric motor with gearbox Getriebebau Nord SK 132 S/4 TF, SK 472-132 S/4 TF. 14) Electric motor with gearbox Getriebebau Nord SK 25-100 L/4 ED, SK 100 L/4 ED. 15) Electric motor with gearbox Getriebebau Nord SK 100 L/40, SK 25-100 L/40. 16) Side channel pump SERO/HEW SVM 111 K,V,60-2,32 DCEx 80L/Ur, year of manufacture: 2015. 17) Centrifugal fan Hürner-Funken GmbH/MM Antriebstechnik HF R160-17D/FY 71 A-4 T, year of manufacture: 2001. 18) Centrifugal fan Konz Lufttechnik/ABB Motors MPR 351/M2V AD 80 B-2, year of manufacture: 2006. 19) Axial fan Helios HRFD 35/4 TK. 20) Centrifugal pump Bedu CRT 70/3, year of manufacture: 2015. 21) Electric motor with gearbox and magnetic field coupling Nord Drivesystems/Varisco SK 33-132MP/4 TF, V 60-2 STGTRM+X+Y, year of manufacture: 2017. 22) Pneumatic agitator PTM. 23) Pneumatic agitator. 24) Pneumatic agitator WP ARO MRV050A/6150051-14-P. Including various stators for progressive cavity pumps. Documentation available. On-site inspection is possible. Individual sale possible. Ijdpfxev Extbj Ag Uoal

Condition: ready for operation (used), Migatronic MTE 440 TIG AC / DC welder for steel and alumminium. Water cooling Migatronic CTU 3000. The maximum welding strength is 440 A. Tested by EWM service. You are welcome to visit for inspection. You will receive a proper invoice. For foreign customers can also be a net invoice. Prerequisite is a valid Ust.Indent.Nr. Subject to prior sale. If you have any questions you can contact us by phone. Iodeh Ib Idopfx Ag Usal Company names and trademarks are the property of their owners and serve only to identify and describe the products. Deviations from technical data and errors in the description of the article can happen and remain reserved. Shipping is exclusively to traders - for private consumers only a pickup is possible.

Condition: ready for operation (used), Siemens 6BK1000-0AE40-1AA0 Box PC 627B (DC) SN:VPA3852938, without hard drive, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Iaodpfxoi Edkte Ag Usl

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, CNC control for Werth measuring machine for scanning probe SP25M Iedpext Ri Tofx Ag Uoal

Condition: used, TIG welding equipment, TIG welding machine NIMAK type GS 200 W TIG and electrode DC welding unit, E-welding machine also suitable for stick electrodes Serial No. 26642 Year of manufacture approx. 1983 Output 200 Amp. = 60% duty cycle 150 Amp. = 100% duty cycle Stepless adjustment range of performance Power supply 380 Volt, 50 Hz, 32 Amp. plug - 5 meter TIG torch package - HF ignition - Stepless current adjustment and current up-slope Iasdpedzqbvofx Ag Ujl - Connection for electrode welding - DC only - Water-cooled - Shielding gas pressure regulator Space requirement L x W x H 900 x 590 x 1000 mm Weight approx. 200 kg Good condition

Condition: used, maximum load weight: 29,429 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2023, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, Equipment: ABS, Schmitz Cargobull SCS 24/L - 13.62 -long-term rental- * XL certificate Iodsvv I Ehepfx Ag Uoal * Beverage certificate * DC 9.5 certificate * Pallet stop bar on both sides * Sliding roof * 4 rows of aluminum slats * Lift axle * Branded tires (Hankook or similar) * Tool box * 4 loading rails + 2 load securing bars * Front tensioning device * Tarpaulin rope * Crossover plate on the last floor plate * Swedish lights Long-term rental + hire purchase possible (subject to credit check) Subject to errors and prior sale! Location: Traxxo GmbH, Auf dem Wörth 2-4, 67240 Bobenheim-Roxheim

Condition: ready for operation (used), Year of construction: 2019, A complete can erecting, counting and seaming system including labeling and cartoning is available. 1) Can unscrambler IMA Swiftpack UN 800S, year of manufacture: 2007, unscrambling capacity: 60 cans/min, formats diameter/height: 45mm/51.5mm, 45mm/84mm, 45mm/96mm, 60mm/80mm, 60mm/122mm. 2) Counting machine Cremer CF 1220, year of construction: 2002, counting capacity: 1000 products/min, counting heads: 1, channels: 12, formats: Capsules (HGK & WGK) and tablets (round & oblong), including one cylinder for storage flaps as spare part. 3) 2x rotary plate Höflinger & Karg S1, plate diameter: 1000mm. 4) CBV Servo lid closing machine (screw capper), year of manufacture: 2019, closing capacity: 40 closing operations/min, lid diameter range: 23mm-100mm. 5) Rudolf Deckert AVM 738 can seamer (crimper), year of manufacture: 2003, seaming capacity: 50 cans/min, can diameter: 45mm/60mm, lid formats diameter/height: 42.4mm/17.15mm, 50mm/12mm. 6) Can and bottle labeler IMA Sensitive 350, year of construction: 2009, labeling capacity: 350 labels/min, can and bottle diameter range: 15mm-78mm, max. product height: 220mm, label length range: 15mm-220mm, label height range: 10mm-140mm, equipped with hot stamping Allen Coding Set S-Compact 50/30 and camera Keyence IV 500 CA. 7) Can and bottle cartoner Uhlmann C100, year of construction: 1988, cartoning capacity: 70 cans/min, max. Can/bottle diameter and height: 60mm/120mm, folding carton length range: 30mm-113mm, folding carton width range: 15mm-85mm, folding carton height range: 70mm-130mm, the machine was converted to cans and bottles in 2017 and equipped with a Mitsubishi D700-SC control system, including GUK Cartonac 91 folder, 3x code reader and luminescence control. 8) Wipotec TQS-HC-A coding and inspection device for serialization, temper evident and weighing, year of manufacture: 2017, inspection capacity: 300 products/min, including 2x Herma 400 label dispenser, dual print head (2 cartridges), camera for print inspection, load cell with weighing belt and hand scanner. 9) Christ FilmTeq 3030 banding machine, year of manufacture: 2011, infeed capacity: 50-200 folding boxes/min, outfeed capacity: 7-50 packs/min, folding box length range: 15mm-400mm, folding box width range: 15mm-90mm, folding box height range: 60mm-150mm, bundle length range: 60mm-400mm, bundle width range: 60mm-150mm, bundle height range: 30mm-230mm. Documentation available. On-site inspection is possible. Iedpfjwa Tixex Ag Ujal

Condition: ready for operation (used), Siemens 6BK1000-0AE40-1AA0 Box PC 627B (DC) SN:VPB9854111, without hard disk, serial no. according to photo, used, good condition, 100% functional, scope of delivery according to photos Iodpfji Edlbjx Ag Ujal

Condition: used, TIG welding machine, electric welder KESTRA type WIG 350 AC/DC E-welding machine Serial No. Year of manufacture approx. 1985 Output: 350 amps = 60% duty cycle Adjustment range: 3 stages and fine adjustment Current type: AC / DC Power connection: 400 V, 50 Hz, 32 A plug - 4-metre hose package with TIG torch - 2-stroke / 4-stroke welding function - Water-cooled - Gas pressure regulator Dimensions (L x W x H): 1050 x 560 x 900 mm Weight: 250 kg The welding test shows good results when welding stainless steel with DC Ijdpfxedzql Ss Ag Ueal and good results when welding aluminium with AC. The HF ignition does not work, the arc can be started via brief contact.