Used Dare Force for sale (6,029)

Condition: used, Year of construction: 1987, pressure / t stroke / mm table-size / mm weight of the machine ca. 65000 kg Make: Shepherd Type: SVRM 4-roller bending machine: Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch Kjdsuddcaopfx Adtswt actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.

Condition: used, pressure 1000 t table length 2110 mm table width 1755 mm stroke 500 mm 18 min work height max. 380 mm 4 Punkt weight of the machine ca. 107,25 t dimensions of the machine ca. / m Kedpfjgrnaqsx Adtewt WILKINS & MITCHELL Trimming press with accessories Pressure force: 1000 t With discharge table and gear component Table area 2110 x 1755 mm Weights Stand: 47.1 T Table: 8.84 T Fumrungen: 1.72 T Drive: 26.47 T Compensating cylinder: 1.65 T Motor mount and guard: 2.04 T Pusher: 11.53 T Adjusting screws and bolts: 2.66 T Slide setting: 0.85 T Miscellaneous: 1.02 T Hydraulic ejector: 0.52 T Total weight: 107.25 tons

Condition: used, mileage: 95,000 km, power: 114 kW (155.00 HP), first registration: 09/2021, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 04/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Storage compartment on instrument panel with USB port, audio system: digital audio system (DAB) with USB and Bluetooth hands-free kit, rear door (opening angle 260/270 degrees), automatic climate control, cargo partition with window, steering column (steering wheel) adjustable for height and reach, reversing assistance with sensors, front and rear mud flaps, telematics system preparation (telematics box). Additional equipment: Ksdpfox Dm Hvsx Adtswt Traction control (ASR), version: S-series, exhaust pipe on left side, electrically adjustable and heated exterior mirrors, brake assist, interior roof light in cargo area, electronic brake force distribution, driver assistance system: hill start assist (AAS), rear axle suspension: parabolic, front axle suspension: transverse leaf spring, tinted front and side windows, alternator 210 A, speed limiter 160 km/h, AdBlue tank: 20 liters, body/build: high-roof panel van extended, fuel tank: 70 liters, engine 2.3 L - 114 kW diesel, wheelbase 3520 mm, low-emission according to Euro 6d-TEMP standard, sliding door cargo/passenger compartment right, cab seats: dual passenger seat, maintenance indicator, gross vehicle weight 3.50 t. Vehicle is in good condition! 3 units available! Financing possible through Santander Bank.

Condition: excellent (used), Year of construction: 2016, AMF Spanntechnik - K20 - 554755 Zero Point clamping modules (6 x) 2 x AMF PowerTube 46 with 60 Bar to ope/clamp 4 x AMF K20 model with diameter 110 mm 2 x AMF package hose / tube / cables Zero point clamping system improving set up time optimized clamping during cutting and non cutting machining. Pull-in locking force 17 kN Holding force 55 kN Length:170mm Width:170mm Kjdpfx Adjx Tr Rnjtjwt Height:60mm Weight:2kg

Condition: good (used), Year of construction: 2016, functionality: fully functional, Vertical baler HSM V-Press 1160 plus, year of manufacture 2016 Technical Data: Manufacturer: HSM Kedpfx Adex Irw Rjtjwt Model: V-Press 1160 plus Year of manufacture: 2016 Pressing force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Feed opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (W x D x H) Weight: 2430 kg Materials: Paper, cardboard, film The baler is in good condition. Operator's manual and CE declaration are available. Inspection can be arranged at any time, including under power. Upon request, we can also carry out test runs with your material for a handling fee. We are happy to answer your questions about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Fridays we are available from 08:00 to 13:00. Please note: All technical data are based on the manufacturer's information. We do not assume liability for the given data or possible errors. Offer is subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by prior arrangement. Sale is ex works, prepayment required, without warranty or guarantee.

Condition: excellent (used), Year of construction: 1999, Jung C-740-C year of construction: 1999 control: siemens Kwedpfx Adsu I Rtijtjt magnet: 700 x 400 mm max. grinding range: 880 x 460 x 550 mm ( x,z,y) magnet variable attraction force variable speed: 1500-3500 rpm max. load on the table: 800 kg top clamp bottom clamp 2x remote control balancer various grinding stones documentation machine is under power for inspection

Condition: used, Year of construction: 1999, length 5000 mm payload 18 Kjdpfewg Htwex Adtswt . Solid rubber, forced steering, for rollers, 2 pieces in stock

Condition: used, Year of construction: 1990, serial number 28043 Kodjpxri Hopfx Adtowt weight 3 t pressure 30 t volt 380 V frequency 50 Hz

Condition: as good as new (ex-display), The AHK M 1230 NC is a robust press brake from the renowned KNUTH brand, designed as a modern, cost-effective alternative to traditional CNC press brakes. This versatile machine is well-suited for operators who prefer working without complex CNC programming, featuring a user-friendly touchscreen interface for direct positioning of the back gauge along the X and R axes. The machine's high-precision steel construction and hydraulic design ensure excellent rigidity and durability, accommodating intricate bending sequences. With a pressure force of 30 tons and a bending length of 1,250 mm, it is ideal for processing various materials and contours. Noteworthy standard equipment includes the Weintek 7'' NC control, motorized back gauge, and light curtains, which enhance both safety and productivity. You can confidently order this reliable press brake online to elevate your sheet metal processing capabilities. Kwsdpfx Aemf Tilodtot

Condition: ready for operation (used), throat depth: 260 mm, operating speed: 7 mm/s, reverse speed: 73 mm/s, total length: 4,270 mm, total width: 1,750 mm, total height: 2,850 mm, travel distance Z-axis: 190 mm, empty load weight: 12,000 kg, passage width: 2,550 mm, Durma HAP 200 ton x 3100 mm Capacity: 200 ton x 3100 mm Backgauge: elec Locking speed: 100 mm/sec Kedpfx Ajx R E Hwsdtswt

Year of construction: 2025, condition: new, Our KVK 5 is a semi-automatic rotary arm wrapper, which has the advantage over our wrappers with turntable that your pallets can be placed at ground level for the wrapping process. Equally ideal for light, unstable and heavy packaged goods, as there are no centrifugal forces and no load-bearing capacity to consider. Kwedpfx Aoyaarfodtst In addition, the KVK 5 model is equipped with a pre-stretch system for 250% elongation. This pre-stretching system allows you to produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. With the KVK 5, there is only minimal contact tension, so that even light packages are not pulled off the pallet. The only thing that still has to be done manually with this wrapper is applying and cutting the film. The machine weight of almost 1000 kg shows how solid and stable this wrapper is. With its rotating arm, it can wrap pallets up to a maximum dimension of 1.00 x 1.20 x 2.40 m. With adjustable speeds of the rotating arm and film carriage, as well as a pre-stretching unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. In addition to an optional photocell for the detection of dark packing goods or black film, this wrapper can be supplied either for wall mounting or with the feet shown. We recommend this model if it is important to you not to have to overcome a ramp with your goods - for example because they are too heavy or unstable. The fact that the rotating arm in this design rotates around the pallet also avoids any centrifugal force. Together with the low contact tension of the pre-stretch system, this also makes the KVK 5 ideal for very light packaged goods. For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: used, Year of construction: 1974, distance between columns 300 mm table length 3550 mm Kodjx U A Rzjpfx Adtewt table width 190 mm table height 800 mm distance between columns 3230 mm column arm 300 mm weight of the machine ca. 12,5 t dimensions of the machine ca. 1600 x 3800 x 2800 m

Condition: used, mileage: 85,000 km, power: 114 kW (155.00 HP), first registration: 02/2022, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 04/2026, color: white, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Storage compartment on dashboard with USB port, passenger side airbag, 13-pin trailer socket, audio system: digital audio (DAB) with USB and Bluetooth hands-free function, digital tachograph, rear doors (opening angle 260/270 degrees), steering column (steering wheel) adjustable in height and reach, spare wheel with standard tyres, spare wheel holder between floor longitudinal members, mud flaps front and rear Kwjdpsx Dm H Ajfx Adtet Additional equipment: Trailer stability program (TSM), pre-installation for trailer socket, traction control system (ASR), version: S series, side exhaust pipe on the left, electrically adjustable and heated exterior mirrors, brake assist, roof light in load compartment, electronic brake-force distribution, driver assistance system: hill start assist (AAS), rear suspension: parabolic leaf springs, front suspension: transverse leaf spring, tinted windscreen and side windows, 210A alternator, speed limiter system 160 km/h, urea tank (AdBlue): 20 liters, body/superstructure: standard high-capacity box van, fuel tank: 70 liters, engine 2.3L - 114 kW diesel, wheelbase 4100 mm, low-emission according to Euro 6d-TEMP, sliding door right side of load/passenger compartment, cab seats: double passenger seat, service indicator, permissible gross weight 3.50 t Payload: 1,000 kg Towing capacity: 3,500 kg Internal dimensions: L 4.65 m, W 1.75 m, H 1.95 m The vehicle is in good condition!

Condition: ready for operation (used), Year of construction: 2002, This HONESS V250-3000 was manufactured in 2002. A profile punching machine for tubes and profiles, it features a self-centering product clamp and interchangeable clamping jaws for various tube types. It can handle tubes up to 100 mm wide and 80 mm high, with a maximum punching diameter of 40 mm. Ideal for high-speed punching with a carriage travel speed of 40 m/min. Contact us for more information about this machine. • Workpiece clamping: • Self-centering product clamp, gripping the tube from the outside • Interchangeable clamping jaws for different tube/profile types • Adjustable clamp position for accurate alignment • Workpiece dimensions: • Max product width (single-sided punching): 100 mm • Max product height (single-sided punching): 80 mm • Max product height for through holes: 60 mm • Max travel of product clamps: 3,100 mm • Minimum distance from tube end to first punchable hole: 30 mm • Punching capacity: • Max punching diameter (as delivered, through holes): Ø40 mm • Punching station: Single vertical punching cylinder • Max punching force: 250 kN at 220 bar working pressure • Max vertical stroke of punching cylinder: 80 mm • Performance: • Max strokes per minute: Dependent on cylinder stroke setting and hole pitch Ksdpfx Ajycfytedtjwt • Clamp carriage travel speed: approx. 40 m/min • Positioning repeatability: ±0.1 mm • Machine size and range: • Punching machine working range: > 3.10 m • Support table length: 3.00 m

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Kwjdpfx Aeu Th S Sjdtot Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The can press was completely overhauled in our workshop. The press is in a very good condition, see the functional video after the overhaul and is sold with the 12 months OBM parts warranty. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 1996, operating hours: 24,222 h, Description Type: BOY 80M Year of manufacture: 1996 Operating hours: 24,222 hours Screw (high wear resistance): 42 mm Max. injection pressure: 1,532 bar Max. shot volume: 200 cm3 Clamping force: 80 t Max. distance between tie bars: 410 mm Min. mould height: 250 mm Max. distance between plates: 725 mm Dimensions: 1,000 x 3,395 x 1,995 mm (L x W x H) Weight: 3,250 kg Options • Core pull • Including Procan control system • High wear-resistant 42 mm screw and cylinder • Colour contact (potential-free max. 5A) • Signal control for colouring Kwsdsx Swn Nspfx Adtot

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Kodpfx Aox Up Igodtswt Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Including SheetMaster Price on request Kwjdpox Sxuwefx Adtjt

Condition: not inspected (used), Year of construction: 1965, functionality: unexamined, machine/vehicle number: 103/65, total height: 2,750 mm, table width: 500 mm, table length: 400 mm, pressing force: 110 t, For sale: Weingarten mechanical press 110 ton. This press is from Maschinenfabrik Weingarten A-G and was built as a robust industrial press. The machine was originally always a direct drive press. At a later stage, a conversion to a trimming press was started, but this project was never finished. As a result, the press has been out of operation for several years. The basic structure of the press is still in good condition. Specifications (according to nameplate): Brand: Weingarten Type: P125 Press force: max. 110 tons Ram stroke: min. 100 mm – max. 300 mm Year of manufacture/delivery: 24-02-1965 Serial number: 103/65 Condition: used, project not completed. Ksdpfx Asybz Svjdtswt

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Technical details swing over bed 730 mm centre distance 3000 mm control Heidenhain MANUALplus4110 weight of the machine ca. 6,5 t dimensions of the machine ca. 7400 x 2100 mm Additional information Very well-maintained cycle lathe with only 15652 operating hours. Working area: Center distance 3000 mm Swing diameter over bed 730 mm Swing diameter over cross slide 450 mm Bed width 480 mm Main spindle: Spindle mount according to DIN 55027 size 11 Spindle bore 130 mm Spindle diameter at front bearing 170 mm Spindle taper 1:20 Tap in center sleeve MT 6 Main drive: AC drive with 2-stage ZF gearbox (automatic shifting gearbox) Drive power (100/60% duty cycle) 22/28 kW Total speed range 1 - 2200 rpm Maximum spindle torque: approx. 2200 Nm X-axis (cross slide) performance data: Maximum travel: 400 mm Feed force: 14 kN Speed: 4 m/min Z-axis (bed slide) performance data: Feed force: 18 kN Speed: 7 m/min Max. workpiece weight: Between centers without steady rest: 2000 kg With one steady rest: 2200 kg With two steady rests: 2500 kg In the chuck: 750 kg Kwsdpfxox Uw Dvj Adtet Tailstock: Quad diameter: 115 mm Quad stroke: 225 mm Quad taper: MK 6 Equipment and accessories: Heidenhain MANUALplus 4110 CNC control SCHUNK ROTASplus 400-102 3-jaw manual chuck 2 steady rests PARAT tool holder Chip conveyor Coolant system Work area enclosure with two sliding doors. Machine length 5700 mm, with swarf converyor 7400 mm Machine width 2100 mm

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Kjdpox Uwtqefx Adtowt Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 30 h, ✅ 1. Metalworking companies with medium to high volumes 🔹 Series production / repeat parts If you produce many identical or similar parts, automation pays off as it reduces the cost per part and ensures consistent quality. 🔹 High production > 1,000 parts/month The higher the output, the faster the investment pays for itself through increased productivity. ✅ 2. Companies facing skilled labor shortages or high workloads 🔹 Difficulty finding or retaining qualified staff A robot can partially replace skilled operators and safeguard production capacity. 🔹 Night shifts / 24/5 production Robots can work longer and without fatigue → higher output without additional personnel. ✅ 3. Companies with complex bending processes or high quality requirements 🔹 Tight tolerances / minimizing errors A robot ensures consistent repeatability. 🔹 Complex downstream processes (e.g. handling, deburring, stacking) An integrated robot can take over tasks that would otherwise be performed manually. Ksdjyb I Azjpfx Adtjwt ✅ 4. Manufacturers facing tight deadlines or cost pressure Short delivery times required Automation reduces throughput times. 🔹 Cost pressure due to competition Longer machine utilization and lower unit costs improve competitiveness. ✅ 5. Future-oriented companies 🔹 Industry 4.0 / digitalization An automated press brake can often be integrated more effectively into IT/MES systems. 🔹 Scalable production If you plan to grow in the future, you have a flexible foundation.

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Kwedpfjxddvnsx Adtjt Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.

Condition: ready for operation (used), Year of construction: 2001, General Data Ksdpfxox D Ea Ie Adtjwt Measurements height 405 mm Dimensions Machine Length 405 mm Clamping Unit Clamping force 800 kN This Krauss Maffei 80-220 C1 was manufactured in 2001. It features a clamping force of 800kN and a mold opening force of 55kN. The machine includes a robot, although it has a vacuum malfunction. Ideal for those looking to enhance their production capabilities in injection moulding. Contact us for more information about this machine. Application Types Injection Moulding

Condition: good (used), Year of construction: 1983, functionality: fully functional, Pneumatic frame press, 4 vertical cylinders, 2 horizontal cylinders, cylinder stroke 110 mm, vertical pressing force 1100 kPa at 15 bar, horizontal 700 kPa at 15 bar, dimensions 3700 x 1850 mm, pressing/installation dimensions 4370 x 2330 x 730 mm, in good condition. Price ex-location. Transport available at extra cost! Kwedpjyaywusfx Adtot