Used Damatomacchine Newton 20 for sale (28,722)

Condition: good (used), Year of construction: 2011, Turning center TORNOS Delta 20/5 III with FANUC Oi-TD control, serial number 52100222, year of manufacture 2011, operating hours estimated at approximately 19,061 hours according to management, chip conveyor, bar loader Robobar SFB-320. Ijdsztdf Iepfx Achotk

Year of construction: 1998, condition: used, functionality: fully functional, Grinding master 2000 This is A polishing machine with a 900mm wide table. It has the capability of polishing stainless steel from a hot rolled finish up to a highly polished finish. A wide range of polishing belts are available for this machine, ranging from 60 grit to 400 grit and for a wide range of materials. It comes complete with an air filtration system, that extracts the polishing dust and particles through a water trough. that captures the dust and particles. The clean filtered air is exhausted back into the building. This means that the Grindingmaster can be located in any position in a building without the need for outside venting. This system also comes with a customised racking system for the safe storage and easy access to the polishing belts. It also comes complete with a Surface Measuring Device, which can accurately measure and verify the desired surface finish. Itedpfx Acezlubdehok

Condition: ready for operation (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 1.302.981, overall weight: 280 kg, load capacity: 20 kg, arm reach: 1,813 mm, controller model: KR C4 NA UL, TECHNICAL DETAILS Itsdpfx Ajzidhuechek Load capacity: 20 kg Reach: 1,813 mm MACHINE DETAILS Controller: KR C4 NA UL Total weight: 280 kg Operating hours: approx. 500 hours EQUIPMENT Teach pendant (manual control) Safety enclosure with Siemens PLC 2 × SICK laser scanners 4 × Light curtains

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, number of spindles: 2, spindle speed (max.): 4,500 rpm, turning length: 145 mm, turning diameter: 240 mm, travel distance X-axis: 130 mm, travel distance Z-axis: 145 mm, Horizontal, twin-spindle CNC lathe with 2 turrets in two working areas and 2 loading portals! The machine underwent an overhaul in 2023! TECHNICAL DETAILS Turning diameter max.: 240 mm Turning length max.: 145 mm Travel X-axis: 130 mm Travel Z-axis: 145 mm Distance between spindles: 340 mm Rapid traverse X/Z-axis: 24 m/min Guidance X-axis: Roller linear guide Guidance Z-axis: Round guide, 145 mm Number of spindles: 2 Spindle drive power: 11 / 7.5 kW Max. spindle speed: 4,500 rpm Torque: 93 Nm Spindle nose: JIS A2-5 Chuck size: 210 mm (8 inches) Number of turrets: 2 Turret type: BT turret Tool positions per turret: 8 Shank size for external turning tools: 20 × 20 mm Max. shank diameter for boring bars: 40 mm MACHINE DETAILS Control: Fanuc 32i-B Working areas: 2 Power connection: 30 kVA Dimensions & Weight Footprint: 4,500 × 2,440 mm Overall height with loader: 2,550 mm Weight: 4,400 kg Loading portal GT Twin with two independent portals Dual gripper for raw and finished parts Turning station Control unit with cable Max. workpiece diameter: 120 mm Max. workpiece length: 80 mm Max. workpiece weight: 3 kg EQUIPMENT Stack magazine, on the left side Parts conveyor belt, on the right side Chip conveyor, on the rear side Coolant tank Coolant supply through both spindles for flushing the clamping devices Various tool holders Various clamping devices Itjdpfx Aoztxlcjchok Documentation and wiring diagrams

Year of construction: 2023, condition: ready for operation (used), A Scheugenpflug material preparation and feeding unit is available. Two-component Scheugenpflug LiquiPrep LP804 20/20 machine, year of manufacture: 2023, tank volume: 50l/20l, machine dimensions X/Y/Z: approx. 1500mm/800mm/2050mm, weight: approx. 430kg, operating hours: 0h. The machine is as new and still in its original packaging. Documentation available. An on-site inspection is possible. Itjdpszkvk Rjfx Achsk

Condition: repair required (used), functionality: unexamined, Year of construction: 1990, overall weight: 92,000 kg, load capacity: 20,000 kg, working height: 8,500 mm, Equipment: documentation/manual, Two rail-mounted electric container gantry cranes are offered for sale from an industrial site in Riga, Latvia. The cranes were designed for loading, unloading, transferring and stacking ISO 1C and 1CC containers. Their 20,000 kg rated lifting capacity, 25 m span and powered travelling trolley make them suitable for container terminals, railway yards, ports, logistics hubs and industrial storage areas. The cranes were manufactured in 1990 by KRAN / Uzlovsky Machine-Building Plant in the Tula region. The factory type designation is 20-25-8.5-5. Two units are available. EQUIPMENT AND DOCUMENTATION Rail-mounted gantry structure with electrically driven crane travel mechanism. Powered travelling trolley and main hoisting mechanism. Operator cabin control. Ijdpfx Acozmtciehjtk The factory passport specifies a rotating 20 t container spreader for ISO 1C and 1CC containers; A technical passport for factory no. 029 is available in Latvian and Russian, including historical inspection and repair entries. Further technical information and detailed photographs can be provided on request.

Condition: good (used), Year of construction: 2014, TORNOS Delta 20/5 III multi-spindle turning machine with FANUC Oi-TD control, serial number 52100249, year of manufacture 2014, operating hours estimated at approximately 16,047 hours according to management, chip conveyor, bar feeder SFB 320e. Itedsztdgfspfx Achjk

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Pamasol Small Scale Plant Type: 2005/100 Year: 2015 Device is in excellent condition, very little use. Unit was removed from the a "blue chip" pharma company operating in Cork, Ireland. Itodpfeznwwajx Achok

Condition: good (used), Year of construction: 2012, functionality: fully functional, Hedelius RS 605 K 20, Year of manufacture: 2012, Heidenhain iTNC 530 control unit, Travel range right work area: 420/385/520 mm, Travel range left work area: 1330/650/520 mm, 2-axis NC rotary-swivel table 520 x 420 mm / right, Fixed table 1400 x 600 mm / left, Spindle speed up to 12,000 rpm, Water-cooled milling spindle, Water-cooled A + C axis / rotary table, Tool shank: SK 40, Itodpfx Acezm Sfcshok 30-position tool changer, Coolant pressure: 25 bar, Filter system: 500 liters, Partition for pendulum machining, Chip conveyor.

Condition: like new (used), Year of construction: 2017, operating hours: 9,830 h, The machine is like new. Iodpfxjziyv Uo Achotk

Condition: used, Year of construction: 2008, serial number 108392 Itsdpfxjztfv Io Achsk Electric capacity 7,7 Watt working width 2050 mm 4 mm weight of the machine ca. 4 t

Condition: used, Year of construction: 2014, functionality: fully functional, pressure: 8 bar, temperature: 20 °C, type of input current: three-phase, input voltage: 400 V, overall weight: 1,250 kg, usable tank capacity: 90 l, rotational speed (max.): 758 rpm, Equipment: rotational speed infinitely variable, We are offering this used RESPECTA DB13A/20-30L mixing and stirring unit, year of manufacture 2014. Manufacturer: RESPECTA Model: DB13A/20-30L Year: 2014 Condition: used Machine type: Mixing and Stirring Unit Weight: 1,250 kg Voltage: 400 V Frequency: 50 Hz CE safety standards The machine is in perfect working condition. This machine can also be purchased together with other units for a complete production line. Technical Details - Mixing Unit: The mixing unit is designed for blending dry fillers with liquids. Maximum filler particle size: 2mm Mixture output rate: approx. 20 – 30 l/min Mixing tool: single-flight mixing screw, left-handed, equipped with wear-protection coating, robust cylinder design with high surface hardness Drive: 3-phase motor, 4 kW – 379 rpm, 400V / 50 Hz Speed range: adjustable from 0 to 758 rpm Screw overload protection: set at 80% of the rated current Quantity adjustment: potentiometer, stepless, without altering the mixing recipe Technical Details - Binder Premixer: Dynamic mixing of pure liquids without any solid content. Mixing performance: max. 5 l/min Mixing tool: single-flight mixing screw, left-handed System materials: stainless steel, Viton, PTFE Drive: three-phase motor, 0.55 kW, 2830 rpm, 230-400 V / 50 Hz Pressure monitoring: S-11 pressure transmitter, 0-4 bar G ½" Pressure display: control terminal at switch cabinet Technical Details - Filler Dosing System: Four dosing systems for volumetric dosing of free-flowing, non-bridging dry fillers. The dosing units are interchangeable with identical units and secured with quick-release clamps. All dosing units are equipped with level sensors. For fine fillers, a horizontal agitator is integrated in dosing unit 2 to prevent bridge formation as much as possible. Fillers with max. grain size 2mm Dosing rate: approx. 2 – 10 l/min Dosing tool: single-flight spiral, left-handed Dosing drive: geared motor, 0.75 kW – 91 rpm, 230-400 V / 50 Hz Speed control: frequency converter – 0.75 kW – 230 V / 50 Hz Speed range: adjustable from 0 to 182 rpm Quantity adjustment and display: control terminal at switch cabinet Storage vessel Capacity: approx. 90 l (4x) Technical Details - Resin Dosing System: Pump unit for volumetric dosing of pure liquids without admixtures of solid or reactive substances. Dosing rate: approx. 400 – 2000 ml/min Viscosity at 20°C: approx. 2,000 mPas Pump type: gear pump Pump pressure: max. permitted 8 bar Drive: three-phase geared motor, 0.37 kW – 291 rpm, 230–400 V / 50 Hz Speed control: frequency converter – 0.75 kW – 230 V / 50 Hz Iedpsyxg Dgefx Achjtk Speed range: adjustable from 0 to 582 rpm Quantity adjustment and display: control terminal at switch cabinet Dismantling and removal at buyer's own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), Column drilling machine / GILLARDON GB 20 from a university Isdpfezuz Iisx Achetk - Stepless speed control - Adapted for MK 3 - Drilling capacity in steel max. 30mm - Arm length 285mm - Drilling stroke 150mm - Table clamping surface 400x400mm - Table height adjustment approx. 650mm - Drilling depth stop - Analog speed indicator - Emergency stop - Work light - Foot switch - Documentation Dimensions: L x W x H 0.7 x 0.6 x 1.8 meters / Weight 650 kg Errors and omissions excepted.

Condition: used, Year of construction: 2017, functionality: fully functional, We are offering this used HEESEMANN UKP 20 edge sanding machine, year of manufacture 2017. Manufacturer: HEESEMANN Model: UKP 20 Year: 2017 Condition: used If you have any further questions or require more information, please do not hesitate to send us a message or give us a call. If needed, the order confirmation with all technical details can be sent. 1 workpiece transport system – total length 5,015 mm – driven by a 1.5 kW three-phase motor, with double chain for workpiece transport Feed speed adjustable from 5 to 25 m/min, frequency-controlled, working height constant at 880 mm, including integrated control cabinets; Including adjustable stop ruler with digital readout and including counter fence with central width adjustment with central height-adjustable and laterally adjustable top pressure bar with digital display, which presses plate-shaped workpieces with ball-bearing rubber rollers (roller pitch 38 mm), including support rollers to extend the support for large workpieces, extendable sideways by approx. 1,500 mm. 4 side guide rollers between the sanding units for secure transport of strips 1 Industrial PC 3.0/4" LCD-TFT color display, 800 x 600 pixel resolution CF card 1GB Operating system: Windows Embedded Standard Touch-screen version with display for production and downtime periods. Ethernet connection available. 2 belt sanding units "M 4" – positions 1 and 2 for sanding straight edges, with intermittent belt blow-off device, belt break detector, tool holder with quick-change device, base plate for sanding tool, prepared for electronic path control for automatic engagement and disengagement of the sanding tool, operating in both climb and counter rotation. Belt dimensions: 2,300 x 80 mm Belt speed: 0/7–12 m/s Motor rating: 3.0 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. Iodpfxjy A D Ecj Achetk 2 oscillation devices (positions 1 + 2) For optimal belt utilization 2 belt sanding units "K 4" – positions 3 and 4 incl. stand, for sanding small profile sections, also suitable for edge rounding; can be swiveled 90° upwards and 45° downwards, belt break detector, tool holder with quick-change device, base plate for sanding tool, intermittent belt blow-off device, prepared for electronic path control for automatic engagement and disengagement of the pressure tool, including climb and counter rotation, designed for manual adjustment and digital indicators for the adjustment axes. Belt dimensions: 2,000 x 50 mm Belt speed: 0.5–8 m/s Motor rating: 1.1 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 4 electronic path controls for fully automatic, timed engagement and disengagement of the sanding tool depending on the set feed speed, sanding pressure, and angle position of the units. 2 steel tools for straight edges, equipped for air cushion sanding, incl. base plate, for 1 "M4" unit, item no. 9000191310 2 steel profile tools equipped for air cushion sanding, incl. base plate, for 1 "K4" unit, item no. 20000025684

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, Overwrapping/Cellophane Wrapping Machine by Sollas Holland B.V., Model SOLLAS 20, Year of Manufacture: 2013 A compact, reliable packaging machine for high-quality cellophane/film overwrapping of individual products or bundles. Technical Specifications Machine type: Overwrapping/Cellophane Wrapping Machine Itodeyhc Dyjpfx Achsk Manufacturer: Sollas Model: 20 Control: PLC with touchscreen (Siemens or Rockwell) Drive: Cam/Servo Output: up to 50 cycles/min Operating pressure: 6 bar Air consumption: 4 nl/stroke Power consumption: 2.5 kW Max. film roll diameter: 320 mm Product size range (standard): Min.: 45 × 40 × 16 mm Max.: 300 × 200 × 96 mm Film material: PP, coated paper, common heat-sealable materials Machine weight: approx. 950 kg Machine color: RAL 9010 (white) Features Servo-driven film feed Cam mechanism – robust and low-maintenance Single-sided infeed and outfeed (single level) PLC control with touchscreen Trailing-edge seal system Quick format changeover (approx. 10–20 min) Low-cost exchange parts Compatible parts with Sollas 17 / 19 / S(X) series Options / Extensions Tear-tape applicator Print mark registration Film slitting Various feeding systems Stainless steel covers Special sealing (spot/stripe) Universal folding section Integration into upstream and downstream equipment (cartoners, case packers, banding systems, etc.) Operational Advantages Highly reliable technology Compact design Flexible format ranges Quick changeover Ideal for small to medium production runs Low operating costs Proven industrial solution with worldwide spare parts availability Condition Used Technically inspected Fully functional Ready for immediate use More photos and videos available! Shipping terms: ex location, loaded free of charge Loading: possible by forklift Transport/disassembly: can be organized Contact If interested, simply write or call: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Subject to prior sale and errors All prices net plus VAT

Year of construction: 2014, condition: ready for operation (used), A pneumatic Swiss-Sonic ultrasonic welding system is offered. 1) Swiss-Sonic UWP 20-1 ultrasonic welding press, year of manufacture 2014, max. pressing force: 3000N, min./max. welding stroke: 0mm/100mm, throat depth: 220mm, height adjustment: 300mm, max. operating pressure: 6bar, cylinder diameter: 80mm, compressed air connection: 8mm, working range: 220mm-520mm, footprint X/Y: approx. 650mm/450mm, machine dimensions X/Y/Z: approx. 430mm/600mm/1530mm, weight: approx. 150kg. 2) Swiss-Sonic ultrasonic generator. Including peripheral equipment. The images do not show the machine for sale. Documentation available. Inspection by appointment. Itsdpfezlt Rwex Achsk

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 4608 1999, power: 5.6 kW (7.61 HP), volume flow: 200 m³/h, Desiccant dryer Manufacturer: Motan Itsdpfx Acoyvfibohjk Type: ADC 200/10/20 Connection value: 5.6 kW Dry air flow rate: 200 m3/h 5 material silos Manufacturer: Motan Type: BC-30 Ltr. Additional heating: 1.55 kW 5 material conveying units Manufacturer: Motan Type: HLS-06-1-A000-0 PRICE REDUCTION FROM 5500 TO 4500 EUR!!!

Condition: used, Year of construction: 2009, functionality: fully functional, The tempering units from the company Single are for sale; all units have been checked for functionality, and there are 4 units on the pallet. They can be sold individually or as a package. Itjdpfx Acjziwk Aehjk Medium: Water for all 4 units. 1. STW 1-6-B5/30-TK5, with 6 kW heating capacity and 30 kW cooling capacity. 2. STL 1-9-B5/10-TK6, with 9 kW heating capacity and 10 kW cooling capacity. 3. STL 1-6-20-TK4, with 6 kW heating capacity and 20 kW cooling capacity. 4. STL 1-4-20-TK4, with 4 kW heating capacity and 20 kW cooling capacity.

Condition: excellent (used), functionality: fully functional, Alfa Laval / Tetra Pak Cream Pasteurization Line Alfa Laval / Tetra Pak Cream Pasteurization Line | Piston Pump, Buffer Tank, Flowmeter, Pasteurizer Complete cream pasteurization line from renowned manufacturers Alfa Laval and Tetra Pak, equipped with high-quality pumps, valves, flowmeters, and control cabinets. The line is designed for hygienic and efficient cream pasteurization in the dairy industry. Capacity: 35,000 liters/hour Main components of the line: 1. Circumferential Piston Pump Manufacturer: Alfa Laval Type: DURACIRC 73 Serial Number: E256143 Year of Manufacture: 2021 Dimensions: 1600 × 600 × 800 mm Included: various valves and stainless steel filter housing 2. Stainless Steel Buffer Tank Tank dimensions: Ø 1100 × 1700 mm Total dimensions: Ø 1200 × 2900 mm 3. Alfa Laval Valves, Type: Unique SSV (6 pcs.) High-quality single seat valves for food applications 4. Flowmeter Manufacturer: Endress + Hauser Model: Promag P / Promag P Dimensions: 200 × 200 × 350 mm High-precision flow measurement for food-grade liquids 5. Centrifugal Pump Manufacturer: LKM Type: LKH 20/155 Power: 5.5 kW Production Number: 20-02319 Dimensions: 700 × 380 × 400 mm Stainless steel construction, suitable for CIP operation 6. Valve Manufacturer: Armaturen AG Type: MA9.31A6 5S Po Dimensions: 600 × 400 × 400 mm 7. Cream Pasteurizer Manufacturer: Alfa Laval / Tetra Pak Type: C10-SH Itodpfxjxtu Uge Achok Serial Number: 30104-38526 Year of Manufacture: 2003 Capacity: 1311 liters Operating parameters: Operating pressure (PS): 0 / 20.0 bar Test pressure (PT): 28.6 bar Temperature range (TS): 0 / 130 °C Dimensions: 5000 × 800 × 2200 mm High-efficiency heat exchanger system ensuring stable pasteurization 8. Centrifugal Pump Manufacturer: Pomac Type: CP29068/230 X 15 Serial Number: 22 818 Year of Manufacture: 12/2011 Capacity: 45 m³/h Power: 15.0 kW Dimensions: 950 × 400 × 500 mm 9. Nocado Valves (5 pcs.) Process valves for food applications 10. Control Cabinets Manufacturer: Eldon and IPBE Dimensions: 400 × 230 × 770 mm 1000 × 300 × 1000 mm The Alfa Laval / Tetra Pak Cream Pasteurization Line is a complete industrial solution with a capacity of up to 35,000 l/h, designed for high hygiene, precise process parameter control, and maximum reliability. Ideal for dairies, cream and milk fat producers.

Year of construction: 2019, operating hours: 4,525 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 12, BAR PEELING MACHINE AND BAR STRAIGHTENING MACHINE IN SET The equipment is in perfect working condition and can be inspected under power. Fully retrofitted in 2019 (completely new mechanics and electronics) Working range: Ø 20 – Ø 80 mm Bars length: 2.5 – 6.0 m Processing tolerance: ISO h9 (possible h8) Peeling depth: up to 3.5 mm, depends on the steel type Steel types: carbon steel, bearing steel, spring steel, etc. Feeding speed: digitally adjustable 0.5 – 12 m/min Cutting head revolutions: up to 1700 RPM Cutting tools: two sets of 4 knives each with automatic digital positioning (triangular and long knifes) Automotive loading table with bar counter Feeding roller with motorized height adjustment Infeed pressure rolls – 4 vertical rolls with inverted DC motor Peeling machine, consists of: - Front guiding system - Peeling head with 4 knifes - Rear guiding system Iedpfx Acswqb Scohstk Bar extraction carriage Main motor and transmission Output pressing rolls - tween Unloading table with motorized height adjustment Collector with counter and automatic collection of finished bars Hydraulic unit – completely new Electric cabinet – new of two modules.

Condition: good (used), functionality: fully functional, Year of construction: 1998, operating hours: 2,618 h, load capacity: 2,000 kg, lifting height: 4,000 mm, free lift: 1,900 mm, load center: 500 mm, fuel type: electric, mast type: duplex, battery capacity: 465 Ah, battery voltage: 80 V, DGUV certified until: 08/2027, fork length: 1,200 mm, total height: 2,550 mm, Equipment: CE marking, UVV, full service history, lighting, sideshift, Linde E 20 electric forklift with the following specifications: Itsdpfx Acozrr H Dehsk * Operating hours: 2,618 * Lifting capacity: 2,000 kg * Lifting height: 4,000 mm * Overall height: 2,550 mm * Year of manufacture: 1998 LINDE 2.0-ton electric forklift with a semi-cabin, very good tires (rear tires new), duplex mast with full free lift, side shifter, 4th valve, multi-lever, two-pedal control, lighting, fork length 1,200 mm, charger. Includes service according to LINDE manufacturer's specifications and a valid UVV inspection upon sale. Inspection, demonstration, and test drive are available by appointment only. Please call to schedule. Sale is exclusively to commercial businesses. Subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively with our own ramp-equipped low-loader (transport costs upon request). You can find more information and offers on our website!

Condition: used, functionality: unexamined, Frisani Ice Cream Machine, Model Labo 14 / 20 C - Maximum filling capacity is up to 4.5 liters per batch. Itodpfszkilhox Achjk - Electrical power supply: 380 volts.

Condition: excellent (used), functionality: fully functional, Slow-speed mill Model CAS-20 Dimensions of the grinding chamber: 260 x 180 mm Power: 2.2 kW 18 rotor blades 2 stator blades Isdpfx Acsztd I Ashjtk Replacement blades

Condition: used, Year of construction: 1998, functionality: fully functional, On offer: BIESSE ROVER 20 CNC machining center – 3 axes, working area 2893 × 950 mm. The machine is used, has undergone a comprehensive technical inspection and extensive service work, and is fully functional and ready for operation. It can be started and thoroughly inspected at our company's premises before purchase. The machine's greatest advantage is its extensive machining capabilities and the modernization of the electrical system and CNC control. The center features an ISO 30 electrospindle, a 10 + 6 spindle drilling head, and a saw unit, enabling milling, drilling, grooving, pocketing, and contour machining. Specifications: • Manufacturer: BIESSE • Model: ROVER 20 • Year of manufacture: 1998 • Number of axes: 3 • Working area X × Y: 2893 × 950 mm • 6 adjustable, pneumatically locking work beams • 12 vacuum cups • Pneumatic front and side stops • Main electrospindle: 3.6 kW, ISO 30 • Saw unit • Drilling head: 10 vertical + 6 horizontal spindles • New X/Y/Z axis servo drives: 3 × 1.0 kW • Vacuum pump: 3.0 kW • CNC controller: ESP32 • System: grblHAL / OpenBuilds CONTROL • Computer connection: USB • Dust extraction port: Ø200 mm • Total power: 9.6 kW • Overall dimensions: approx. 380 × 155 × 205 cm Service work performed: • Replacement of electrospindle bearings • Vacuum pump inspection and impeller replacement • Inspection of the pneumatic system and leak removal • Installation of 3 new X/Y/Z axis servo drives • New electrical system and CNC control installation Application: • Production of furniture, fronts, doors, and interior design elements • Machining of MDF, plywood, and furniture boards • Milling and contour machining • Vertical and horizontal drilling • Grooving and pocketing Additional information: • The machine does not require a dedicated computer – control is possible via a computer through USB • Currently operating on ESP32 with grblHAL and OpenBuilds CONTROL • It is possible to use a different CNC system, e.g., PikoCNC or UCCNC Iedpfx Aszucbqschotk • Upon request, we can configure another system – the estimated cost of work is approximately PLN 4,000 + license, controller, and any components • Manufacturer's documentation in Italian • The photos show the actual condition of the machine offered • Free machine operation training at our company's premises • The price quoted in the auction applies to export/WDT sales with a VAT rate of 0%; in the case of domestic sales, 23% VAT will be added Financing and transport: • We organize transport using the MDD fleet or through external carriers • We assist in obtaining leasing or a leasing loan • The delivery cost depends on the destination and the method of machine transport.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, The water is pressed through the RO membrane by means of a high-pressure pump. The desalinated water/permeate is then led to consumption via a 1000 litre reservoir. The water containing the concentrated salts/concentrate is led to outlet. The relation between permeate/concentrate shall be adjusted manually on the needle valve. Under normal operating conditions the RO membranes have a long lifetime. But even with a Ijdpfx Acjzl E Diehstk good raw-water quality, layers of impurities will, to a certain extent, occur and there will be a slow reduction of the permeate capacity.